Evaluation of Monoraphidium contortum for the tertiary treatment of dairy industry wastewater and biomass production with nitrogen supplementation.

The present study sought to evaluate the secondary wastewater from dairy industry as a culture medium for Monoraphidium contortum, in bench-scale tubular photobioreactor, aiming at tertiary wastewater treatment and microalgae biomass production. Since the used secondary wastewater contained residual phosphorus (P) but negligible residual nitrogen (N), we also evaluated the nitrogen supplementation, following Redfield ratio (N:P = 16:1) and the same N:P proportion of Bold Medium (N:P = 1.71:1). These cultures were compared to secondary wastewater without N and Bold Medium (control). Secondary wastewater without N addition provided lower values of maximum biomass concentration, indicating the importance of this supplementation. The nitrogen supplementation following Bold Medium represented the best protocol, since biomass productivity was higher than that in control culture, but with lower nitrogen addition (in comparison with the supplementation following Redfield proportion). The biomass of M. contortum showed to be an excellent candidate for oil production, which could be employed as feedstock for biodiesel, for example.

Neochloris oleoabundans Growth Evaluation Under Different Nitrogen:Phosphorus:Carbon Feeding Strategies.

Microalgae are photosynthetic microorganisms known for their variety of compounds that can be useful for food, feed, pharmaceuticals, and fuel industries. Microalgae production costs have been one of the major obstacles to large-scale commercial production. Therefore, several studies are still being performed aiming to increase biomass by developing novel photobioreactor design and microalgae cultivation techniques. This work's purpose is to increase Neochloris oleoabundans biomass. Different nutrient-feeding regimes were tested in N. oleoabundans cultivation in Erlenmeyer flasks and bench-scale tubular photobioreactor. In Erlenmeyer flasks, the best concentrations of nitrate and phosphate were 8.82 mM and 5.16 mM, respectively. In bench-scale tubular photobioreactor, NaNO3 proved to be the best nitrogen source, in comparison with (NH4)2SO4 and NH4NO3. Still in the photobioreator, the addition of nitrate by fed-batch process combined with automated system of CO2 feeding showed to be of utmost importance for insuring a high density of N. oleoabundans. The essential nutrients evaluated in this work play an important role on N. oleoabundans biomass accumulation, as well as the photobioreactor configuration and feeding regimes.

Ethanol effect on batch and fed-batch Arthrospira platensis growth.

The ability of Arthrospira platensis to use ethanol as a carbon and energy source was investigated by batch process and fed-batch process. A. platensis was cultivated under the effect of a single addition (batch process) and a daily pulse feeding (fed-batch process) of pure ethanol, at different concentrations, to evaluate cell concentration (X) and specific growth rate (µ). A marked increase was observed in the cell concentration of A. platensis in runs with ethanol addition when compared to control cultures without ethanol addition. The fed-batch process using an ethanol concentration of 38 mg L(-1) days(-1) reached the maximum cell concentration of 2,393 ± 241 mg L(-1), about 1.5-fold that obtained in the control culture. In all experiments, the maximum specific growth rate was observed in the early exponential phase of cell growth. In the fed-batch process, µ decreased more slowly than in the batch process and control culture, resulting in the highest final cell concentration. Ethanol can be used as a feasible carbon and energy source for A. platensis growth via a fed-batch process.

Potential of Microalgae Carotenoids for Industrial Application.

Microalgae cultivation, when compared to the growth of higher plants, presents many advantages such as faster growth, higher biomass productivity, and smaller land area requirement for cultivation. For this reason, microalgae are an alternative platform for carotenoid production when compared to the traditional sources. Currently, commercial microalgae production is not well developed but, fortunately, there are several studies aiming to make the large-scale production feasible by, for example, employing different cultivation systems. This review focuses on the main carotenoids from microalgae, comparing them to the traditional sources, as well as a critical analysis about different microalgae cultivation regimes that are currently available and applicable for carotenoid accumulation. Throughout this review paper, we present relevant information about the main commercial microalgae carotenoid producers; the comparison between carotenoid content from food, vegetables, fruits, and microalgae; and the great importance and impact of these molecule applications, such as in food (nutraceuticals and functional foods), cosmetics and pharmaceutical industries, feed (colorants and additives), and healthcare area. Lastly, the different operating systems applied to these photosynthetic cultivations are critically discussed, and conclusions and perspectives are made concerning the best operating system for acquiring high cell densities and, consequently, high carotenoid accumulation.

Simultaneous use of urea and potassium nitrate for Arthrospira (Spirulina) platensis cultivation.

Urea has been considered as a promising alternative nitrogen source for the cultivation of Arthrospira platensis if it is possible to avoid ammonia toxicity; however, this procedure can lead to periods of nitrogen shortage. This study shows that the addition of potassium nitrate, which acts as a nitrogen reservoir, to cultivations carried out with urea in a fed-batch process can increase the maximum cell concentration (X(m) ) and also cell productivity (P(X) ). Using response surface methodology, the model indicates that the estimated optimum X(m) can be achieved with 17.3 mM potassium nitrate and 8.9 mM urea. Under this condition an X(m) of 6077 ± 199 mg/L and a P(X) of 341.5 ± 19.1 mg L(-1) day(-1) were obtained.

CO2 from alcoholic fermentation for continuous cultivation of Arthrospira (Spirulina) platensis in tubular photobioreactor using urea as nitrogen source.

Carbon dioxide released from alcoholic fermentation accounts for 33% of the whole CO(2) involved in the use of ethanol as fuel derived from glucose. As Arthrospira platensis can uptake this greenhouse gas, this study evaluates the use of the CO(2) released from alcoholic fermentation for the production of Arthrospira platensis. For this purpose, this cyanobacterium was cultivated in continuous process using urea as nitrogen source, either using CO(2) from alcoholic fermentation, without any treatment, or using pure CO(2) from cylinder. The experiments were carried out at 120 µmol photons m(-2) s(-1) in tubular photobioreactor at different dilution rates (0.2 ≤ D ≤ 0.8 d(-1) ). Using CO(2) from alcoholic fermentation, maximum steady-state cell concentration (2661 ± 71 mg L(-1) ) was achieved at D = 0.2 d(-1) , whereas higher dilution rate (0.6 d(-1) ) was needed to maximize cell productivity (839 mg L(-1) d(-1) ). This value was 10% lower than the one obtained with pure CO(2) , and there was no significant difference in the biomass protein content. With D = 0.8 d(-1) , it was possible to obtain 56% ± 1.5% and 50% ± 1.2% of protein in the dry biomass, using pure CO(2) and CO(2) from alcoholic fermentation, respectively. These results demonstrate that the use of such cost free CO(2) from alcoholic fermentation as carbon source, associated with low cost nitrogen source, may be a promising way to reduce costs of continuous cultivation of photosynthetic microorganisms, contributing at the same time to mitigate the greenhouse effect.