Similarities and differences in the dental tissue proportions of the deciduous and permanent canines of Early and Middle Pleistocene human populations.

The two- and three-dimensional assessment of dental tissues has become routine in human taxonomic studies throughout the years. Nonetheless, most of our knowledge of the variability of the enamel and dentine dimensions of the human evolutionary lineage comes from the study of permanent dentition, and particularly from molars. This leads to a biased view of the variability of these features. Due to their early formation and rapid development, the deciduous teeth allow more simplified inferences regarding the processes involved in the dental tissue development of each group. Therefore, their study could be very valuable in dental palaeohistology. In this research, we have explored the dental tissue proportions of the deciduous canines belonging to some human samples of the Early and Middle Pleistocene. The purpose of this was to discuss the meaning of the similarities and differences observed in their histological pattern, as well as to evaluate the degree of covariance with that observed in the permanent dentition of these populations. Our results show that, although there are some similarities in the dental tissue proportions between the deciduous and permanent canines of the study samples, the two dental classes do not provide a similar or comparable pictures of the dental tissue pattern present in the dentition of fossil hominins. Future works on the dental tissue patterns of the anterior and posterior dentition, including deciduous teeth, of fossil samples, may help to shed light on this hypothesis.

Testing the inhibitory cascade model in the Middle Pleistocene Sima de los Huesos (Sierra de Atapuerca, Spain) hominin sample.

The Middle Pleistocene Sima de los Huesos (SH) site has yielded more than 7.500 human fossil remains belonging to a minimum of 29 individuals. Most of these individuals preserve either the complete mandibular molar series or at least the first (M1 ) and second (M2 ) molars. The inhibitory cascade mathematical model was proposed by Kavanagh et al. (Nature, 449, 427-433 [2007]) after their experimental studies on the dental development of murine rodent species. The activator-inhibitor mechanism of this model has shown its ability for predicting evolutionary size patterns of mammalian teeth, including hominins. The main aim of this study is to test whether the size molar patterns observed in the SH hominins fit the inhibitory cascade model. With this purpose, we have measured the crown area of all SH molars in photographs, using a planimeter and following techniques used and well contrasted in previous works. Following one of the premises of the inhibitory cascade model, we expect that the central tooth (M2 in our case) of a triplet would have the average size of the two outer teeth. The absolute difference between the observed and the expected values for the M2 s ranges from 0.23 to 8.46 mm2 in the SH sample. In terms of percentage, the difference ranges between 0.25% and 10.34%, although in most cases, it is below 5%. The plot of the estimated M3 /M1 and M2 /M1 size ratios obtained in the SH hominins occupies a small area of the theoretical developmental morphospace obtained for rodent species. In addition, the majority of the values are placed near the theoretical line which defines the relationship predicted by the inhibitory cascade model in these mammals. The values of the slope and intercept of the reduced major regression obtained for the SH individuals do not differ significantly from those obtained for rodent species, thus confirming that the size of the molars of the SH hominins fits the inhibitory cascade model. We discuss these results in terms of dental development. Despite the promising results in the SH sample, we draw the attention to the fact that most Early Pleistocene Homo specimens exhibit a pattern (M1  < M2  > M3 ), which is outside the expected theoretical morphospace predicted by the inhibitory cascade model. The shift from the M1 < M2 < M3 size relationship observed in early hominins (including H. habilis) to the M1 > M2 > M3 size relationship, which is predominant in modern humans, includes sequences that depart from predictions of the inhibitory cascade model. Additional studies are required to understand these deviations.

Testing the inhibitory cascade model in a recent human sample.

The Inhibitory Cascade Model was proposed by Kavanagh and colleagues (Nature, 449, 427-433 [2007]) after their experimental studies on the dental development of murine rodent species. These authors described an activator-inhibitor mechanism that has been employed to predict evolutionary size patterns of mammalian teeth, including hominins. In the present study, we measured the crown area of the three lower permanent molars (M1, M2, and M3) of a large recent modern human sample of male and female individuals from a collection preserved at the Institute of Anthropology of the University of Coimbra (Portugal). The main aim of the present study is to test if the size molar patterns observed in this human sample fits the Inhibitory Cascade Model. For this purpose, we first measured the crown area in those individuals preserving the complete molar series. Measurements were taken in photographs, using a planimeter and following well-tested techniques used in previous works. We then plot the M3 /M1 and M2 /M1  size ratios. Our results show that the premise of the Inhibitory Cascade Model, according to which the average of the crown area of M2 is approximately one-third of the sum of the crown area of the three molars, is fulfilled. However, our results also show that the individual values of a significant number of males and females are out of the 95% confidence interval predicted by the Inhibitory Cascade Model in rodents. As a result, the present analyses suggest that neither the sample of males, nor that of females, nor the pooled sample fits the Inhibitory Cascade Model. It is important to notice that, although this model has been successfully tested in a large number of current human populations, to the best of our knowledge this is the first study in which individual data have been obtained in a recent human population rather than using the average of the sample. Our results evince that, at the individual level, some factors not yet known could interfere with this model masking the modulation of the size on the molar series in modern humans. We suggest that the considerable delay in the onset of M3 formation in modern humans could be related to a weakening of the possible activation/inhibition process for this tooth. Finally, and in support of our conclusions, we have checked that the absolute and relative size of M1 and M2 is not related to the M3 agenesis in our sample. In line with other studies in primates, our results do not support the Inhibitory Cascade Model in a recent human sample. Further research is needed to better understand the genetic basis of this mechanism and its relationship to the phenotype. In this way, we may be able to find out which evolutionary changes may be responsible for the deviations observed in many species, including Homo sapiens.

Comparative dental study between Homo antecessor and Chinese Homo erectus: Nonmetric features and geometric morphometrics.

The Chinese Middle Pleistocene fossils from Hexian, Xichuan, Yiyuan, and Zhoukoudian have been generally classified as Homo erectus s.s. These hominins share some primitive features with other Homo specimens, but they also display unique cranial and dental traits. Thus, the Chinese Middle Pleistocene hominins share with other European and Asian hominin populations the so-called 'Eurasian dental pattern'. The late Early Pleistocene hominins from Gran Dolina-TD6.2 (Spain), representing the species Homo antecessor, also exhibit the Eurasian dental pattern, which may suggest common roots. To assess phylogenetic affinities of these two taxa, we evaluated and compared nonmetric and metric dental features and interpreted morphological differences within a comparative hominin framework. We determined that the robust roots of the molars, the shelf-like protostylid, the dendrite-like pattern of the enamel-dentine junction surface of the upper fourth premolars and molars, the strongly folded dentine of the labial surface of the upper incisors, and the rare occurrence of a mid-trigonid crest in the lower molars, are all characteristic of Chinese H. erectus. With regard to H. antecessor, we observed the consistent expression of a continuous mid-trigonid crest, the absence of a cingulum in the upper canines, a complex root pattern of the lower premolars, and a rhomboidal occlusal contour and occlusal polygon and protrusion in the external outline of a large a bulging hypocone in the first and second upper molars. Using two-dimensional geometric morphometrics, we further demonstrated that H. antecessor falls outside the range of variation of Chinese H. erectus for occlusal crown outline shape, the orientation of occlusal grooves, and relative locations of anterior and posterior foveae in the P4s, P3s, M1s, M2s, and M2s. Given their geographic and temporal separation, the differences between these two species suggest their divergence occurred at some point in the Early Pleistocene, and thereafter they followed different evolutionary paths.

The Ratón Pérez collection: Modern deciduous human teeth at the Centro Nacional de Investigación sobre la Evolución Humana (Burgos, Spain).

OBJECTIVES: The aim of this report is to present the large deciduous tooth collection of identified children that is housed at the National Research Center on Human Evolution (CENIEH) in Burgos, Spain. METHODS: Yearly, members of the Dental Anthropology Group of the CENIEH are in charge of collecting the teeth and registering all the relevant information from the donors at the time of collection. In compliance with Spanish Law 14/2007 of July 3, 2007, on Biomedical Research (BOE-A-2007-12945), all individuals are guaranteed anonymity and confidentiality. When the donor hands in the tooth, they fill out a Donor Information Form and sign the Informed Consent Form. At the same time, another person completes the data label for the transparent polyethylene zip lock bag where the tooth is temporarily stored. All teeth are then transferred to the CENIEH Restoration lab, where the specialists apply the same protocol as for the fossil remains. RESULTS: Although the sample is still growing, from the first collection campaign in 2014 to date it comprises 2977 teeth of children whose ages of tooth loss are between 2 and 15 years. Each tooth is associated with basic information of the individuals and their parents and grandparents (sex, date, and place of birth, ancestry, country of residence), as well as important data about early life history (pregnancy duration, breastfeeding, bottle-feeding) and other relevant information provided by the donors (such as if they are twins, dental loss, or dental extraction). CONCLUSIONS: Due to the scarcity of deciduous dental samples available, the Ratón Pérez collection represents a highly valuable sample for a wide range of disciplines such as forensic, dental, and anthropological fields among others.

Inner morphological and metric characterization of the molar remains from the Montmaurin-La Niche mandible: The Neanderthal signal.

Here, we present a metric and morphological study of the molar remains from the Montmaurin-La Niche mandible by means of microcomputed tomography. According to the last analysis, based on the combination of geomorphological and paleontological data, the level bearing this human mandible probably corresponds to the marine isotope stages (MIS) 7. These data place the Montmaurin-La Niche in a chronologically intermediate position between the Neanderthals and the Middle Pleistocene fossils (e.g., Sima de los Huesos, la Caune de l'Arago). A recent study has revealed that while the mandible is more closely related to the Early and Middle Pleistocene African and Eurasian populations, the morphology of the outer enamel surfaces of its molars is typical of the Neanderthal linage. The data presented here are in line with this finding because the morphology of the enamel-dentine junction of the molars is similar to that of Neanderthals, whereas the absolute and relative enamel thickness values (2D and 3D) are closer to those exhibited by some Early Pleistocene hominins. Moreover, the pulp cavity morphology and proportions are in concordance with the Neanderthal populations. Our results strengthen the hypothesis that the settlement of Europe could be the result of several migrations, at different times, originated from a common source population. Thus, the variability in the European Middle Pleistocene populations (e.g., Montmaurin, Sima de los Huesos, Arago, Mala Balanica) could indicate different migrations at different times and/or population fragmentation, without excluding the possible hybridization between residents and new settlers.

Sexual dimorphism of the enamel and dentine dimensions of the permanent canines of the Middle Pleistocene hominins from Sima de los Huesos (Burgos, Spain).

Sexual dimorphism is an important component of the total variation seen in populations and plays a key role in taxonomic debates. In this study, microtomographic (microcomputed tomography) techniques were applied to a sample of hominin teeth from the Sima de los Huesos site (Spain). Dental tissue proportions of the permanent canines were assessed to characterize the pattern and degree of sexual dimorphism within this population. In addition, the possible similarities and differences with the Homo neanderthalensis remains from Krapina (Croatia) and with a recent modern human sample were evaluated. A combination of classical statistical approaches with more novel techniques allowed us not only to ratify the sex allocation of the individuals previously assigned in the literature but also to estimate the sex of the youngest individuals, which were not assessed in previous studies. Likewise, the sexes of certain extensively worn canines and isolated pieces were estimated. As a result, the sex ratio observed in our dental sample from the Sima de los Huesos population is 5:9 (Nm:Nf). In general terms, both Sima de los Huesos and Krapina dental samples have a degree of sexual dimorphism in their permanent canine tissue proportions that does not surpass that of modern humans. The marked dimorphic root volume of Sima de los Huesos mandibular canines is the exception, which surpasses the modern human mean, although it falls within the 95% confidence interval. Therefore, our results do not support that dental tissue proportions of the European Middle Pleistocene populations were more dimorphic than in modern humans. However, the differences in canine tissue proportions are great enough to allow sex estimation with a high degree of confidence.

A descriptive and comparative study of two Early Pleistocene immature scapulae from the TD6.2 level of the Gran Dolina cave site (Sierra de Atapuerca, Spain).

Here we present the descriptive and comparative study of two immature scapulae recovered from the TD6.2 level of the Gran Dolina cave site (Sierra de Atapuerca, Spain) and assigned to Homo antecessor. This is the first time that data on the morphology and dimensions of the scapulae of a European late Early Pleistocene hominin population are provided. Considering the state of development and the linear dimensions, the scapula ATD6-116 could belong to a child of about 2-4 years. The morphology of ATD6-116 clearly departs from that of the Australopithecus afarensis juvenile specimen DIK-1-1, pointing to functional differences in locomotor behavior between Australopithecus and the late Early Pleistocene hominins. The immature scapula ATD6-118 belonged to an immature individual with a development of the scapula equivalent to that of adolescents of recent human populations. The scapulae ATD6-118 and KNM-WT 15000 present a similar state of development. Although the scapula KNM-WT 15000 is clearly larger than ATD6-118, these two specimens share some characteristics such as their relative narrowness and the value of the axilloglenoid and spinoglenoid angles. The glenoid fossa of ATD6-116 show a lateral orientation, whereas in ATD6-118 the glenoid fossa is slightly cranially oriented, but still within the range of variation of modern humans. The glenoid index of both ATD6-116 and ATD6-118 is low in accordance to the values usually observed in other early hominins, thus showing the primitive condition for this feature. Both scapulae show a ventrally placed axillary sulcus. The presence of this primitive feature in ATD-116 confirms that the shape of the axillary border has a genetic basis and it is not related to physical activity.

Ectopic maxillary third molar in Early Pleistocene Homo antecessor from Atapuerca-Gran Dolina site (Burgos, Spain).

OBJECTIVES: Here we describe the case of an ectopic maxillary third molar (M3 ), preventing the eruption of the M2 , in the individual H3 of the hominin hypodigm of level TD6.2 of the Early Pleistocene site of Gran Dolina (Sierra de Atapuerca, Spain). MATERIALS AND METHODS: The fossil remains from the TD6.2 level of the Gran Dolina site (about 170 specimens) are assigned to Homo antecessor. Different geochronological methods place these hominins in the oxygen isotopic stage 21, between 0.8 and 0.85 million years ago (Ma). The immature individual H3 is represented by an almost complete midface (ATD6-69), preserving various teeth in situ. We used high-resolution microtomograhy (mCT) to investigate the abnormal position of the left M3 , virtually reconstruct M2 , and M3 as well as assessing the development stage of these. Finally, we compare this case with extinct and extant populations. RESULTS: Based on the identified signs, we suggest that individual H3 suffered from a unilateral impaction of the M2 as a result of the ectopic position of the developing M3 . DISCUSSION: We conclude that the most likely etiology for the ectopic position of the M3 is the lack of space in the maxilla. We discuss possible contributing factors, such as morphometric aspects of the maxilla and the early mineralization of the M3 , to support the M2 impaction. Finally, due to the early age at death of this individual we did not identify any secondary lesion associated with the M2 impaction.

Daily Distance Traveled Is Associated with Greater Brain Size in Primates.

Explanations for the brain size increments through primate and, particularly, human evolution are numerous. Commonly, these hypotheses rely on the influence that behavioral and ecological variables have on brain size in extant primates, such as diet quality, social group size, or home range (HR) area. However, HR area does not reflect the time spent moving. As such, it has not been properly addressed whether the effort involved in movement could have affected brain size evolution in primates. This study aimed to test the influence of daily movement on primates' brain sizes, controlling for these other behavioral and ecological factors. We used a large comparative dataset of extant primate species and phylogenetic comparative methods. Our results show a significant correlation between daily movement and brain mass, which is not explained by the influence of diet, social group size, HR, or body mass. Hence, from an evolutionary timescale, a longer daily movement distance is not a constraining factor for the energetic investment in a larger brain. On the contrary, increased mobility could have contributed to brain mass incrementations through evolution.

New permanent teeth from Gran Dolina-TD6 (Sierra de Atapuerca). The bearing of Homo antecessor on the evolutionary scenario of Early and Middle Pleistocene Europe.

Here we analyze the unpublished hominin dental remains recovered from the late Early Pleistocene Gran Dolina-TD6.2 level of the Sierra de Atapuerca (northern Spain), as well as provide a reassessment of the whole TD6.2 hominin dental sample. Comparative descriptions of the outer enamel surface (OES) and the enamel-dentine junction (EDJ) are provided. Overall, the data presented here support the taxonomic validity of Homo antecessor, since this species presents a unique mosaic of traits. Homo antecessor displays several primitive features for the genus Homo as well as some traits exclusively shared with Early and Middle Pleistocene Eurasian hominins. Some of these Eurasian traits were retained by the Middle Pleistocene hominins of Europe, and subsequently became the typical condition of the Neanderthal lineage. Although other skeletal parts present resemblances with Homo sapiens, TD6.2 teeth do not show any synapomorphy with modern humans. In addition, TD6.2 teeth can be well differentiated from those of Asian Homo erectus. The dental evidence is compatible with previous hypothesis about H. antecessor belonging to the basal population from which H. sapiens, Homo neanderthalensis, and Denisovans emerged. Future findings and additional research may help to elucidate the precise phylogenetic link among them.

Modern humans sex estimation through dental tissue patterns of maxillary canines.

OBJECTIVES: Dental tissue proportions of human permanent canines is one of only a few sexually dimorphic features that is present in childhood and maintained in adults, offering the opportunity for this to be used in sex determination. This study assesses dental tissue volumes and surface areas of maxillary permanent canines in a sample of known sex to provide new data and to explore the potential of these variables as reliable sexual estimators. MATERIALS AND METHODS: The teeth studied here derive from 56 individuals (27 females and 29 males) of known sex and age, and of different geographic origins. The teeth were scanned and three-dimensional (3D) measurements (volumes and surface areas) were obtained. In addition, a discriminant function analysis was applied. RESULTS: The results presented here concur with those previously published in relation to both size and dental tissue patterns. Male maxillary canines have a greater dentine component, whereas female enamel is thicker, leading to a difference in dental size in favor of males. Discriminant functions were calculated using these histological variables successfully identifying sex in between 87.5% and 93.75% of the known-sex hold-out sample, with 92.3% correctly assigned when all functions were applied together. DISCUSSION: The present study supports that methods for sex determination based on dental tissue measurements can achieve high allocation accuracies, being especially useful in the case of subadults or when no other appropriate method is available.

Contribution of dental tissues to sex determination in modern human populations.

OBJECTIVES: Accurate sex estimation is an essential step for the reconstruction of the biological profile of human remains. Earlier studies have shown that elements of the human permanent dentition are sexually dimorphic. The aims of this study are to determine the degree of sexual dimorphism in the dental tissue volumes and surface areas of mandibular canines and to explore its potential for reliable sex determination. METHOD: The teeth included in this study (n = 69) were selected from anthropological collections from Spain, South Africa and Sudan. In all cases, the sex of the individuals was known. The teeth were scanned and three-dimensional (3D) measurements (volumes and surfaces areas) were obtained. Finally, a dsicriminant function analysis was applied. RESULTS: Our results showed that sexual dimorphism in canine size is due to males having greater amounts of dentine, whereas enamel volume does not contribute significantly to overall tooth size dimorphism. Classification accuracy of the multivariable equations tested on slightly worn teeth ranged from 78 to 90.2% for the crossvalidation, and from 71.43 to 84.62% for the hold-out sample validation. When all functions were applied together, the sex was correctly assigned 92.30% of the time. CONCLUSIONS: Our results suggest that the 3D variables from mandibular canine dental tissues are useful for sex determination as they present a high degree of dimorphism. The results obtained show the importance of 3D dental tissue measurements as a methodology in sex determination, which application should be considered as a supplemental method to others.

Early Pleistocene hominin deciduous teeth from the Homo antecessor Gran Dolina-TD6 bearing level (Sierra de Atapuerca, Spain).

OBJECTIVES: During the last 13 years, the late Early Pleistocene Gran Dolina-TD6-2 level (Sierra de Atapuerca, northern Spain) has yielded an additional sample of 26 dental specimens attributed to Homo antecessor. In this report, we present a descriptive and comparative study of the six deciduous teeth. METHODS: We provide external and internal morphological descriptions following classical terminology, as well as the mesiodistal and buccolingual measurements of the teeth. The internal morphology was described by means of micro-CT technique. RESULTS: The TD6 deciduous teeth preserve primitive features regarding the Homo clade, such as the presence of styles in lower and upper canines and developed anterior and posterior foveae in the dm2 . However, other features related to the complexity of the crown morphology (e.g., cingulum) are not present in this sample. Furthermore, the great reduction of the talonid of the dm1 s is also noteworthy. Despite the limited comparative evidence, the presence of a remarkably well-developed tuberculum molare in the dm1 and dm1 s from TD6 can be also considered a derived feature in the genus Homo. The TD6 hominins exhibit dental dimensions similar to those of other Pleistocene hominins. The dm1 s are buccolingually elongated and the buccolingual diameter of ATD6-93 is the largest recorded so far in the Homo fossil record. CONCLUSIONS: This study expands the list of plesiomorphic features of H. antecessor, and provides some information on the evolutionary status of this species. However, the identification of some advanced traits evinces a step towards the derived morphology of European Pleistocene teeth. The study of the deciduous dentition confirms the mosaic pattern of H. antecessor morphology revealed in previous studies of this hominin sample.

New methodology to reconstruct in 2-D the cuspal enamel of modern human lower molars.

OBJECTIVES: In the last years different methodologies have been developed to reconstruct worn teeth. In this article, we propose a new 2-D methodology to reconstruct the worn enamel of lower molars. Our main goals are to reconstruct molars with a high level of accuracy when measuring relevant histological variables and to validate the methodology calculating the errors associated with the measurements. METHODS: This methodology is based on polynomial regression equations, and has been validated using two different dental variables: cuspal enamel thickness and crown height of the protoconid. In order to perform the validation process, simulated worn modern human molars were employed. The associated errors of the measurements were also estimated applying methodologies previously proposed by other authors. RESULTS: The mean percentage error estimated in reconstructed molars for these two variables in comparison with their own real values is -2.17% for the cuspal enamel thickness of the protoconid and -3.18% for the crown height of the protoconid. This error significantly improves the results of other methodologies, both in the interobserver error and in the accuracy of the measurements. CONCLUSIONS: The new methodology based on polynomial regressions can be confidently applied to the reconstruction of cuspal enamel of lower molars, as it improves the accuracy of the measurements and reduces the interobserver error. The present study shows that it is important to validate all methodologies in order to know the associated errors. This new methodology can be easily exportable to other modern human populations, the human fossil record and forensic sciences.

Virtual reconstruction of the Early Pleistocene mandible ATD6-96 from Gran Dolina-TD6-2 (Sierra De Atapuerca, Spain).

OBJECTIVES: In this report, we present a further study of the late Early Pleistocene ATD6-96 human mandible, recovered from the TD6-2 level of the Gran Dolina cave site (Sierra de Atapuerca, northern Spain) and attributed to Homo antecessor. METHODS: ATD6-96 consists of a left half of a gracile mandible of an adult individual with the premolars and molars in place that is broken at the level of the lateral incisor-canine septum. The present analysis is based on a virtual reconstruction of the whole mandible by means of computed tomography (CT). We have reconstructed the symphysis using information from a modern human sample, as well as from a wide sample composed of several Homo specimens. RESULTS: This research has allowed us to record new variables with taxonomic and phylogenetic interest. We have estimated the length/width index of the alveolar arcade, as well as the percentage of the arcade length with regard to the total length. The latter confirms that ATD6-96 shares with all African and Asian Homo species a primitive structural pattern, as it was established in previous studies. In constrast, the length/width index of the alveolar arcade in the H. antecessor specimen is close to the mean values of Neandertals and the Atapuerca-Sima de los Huesos hominins. CONCLUSIONS: H. antecessor is derived regarding the shape of the mandibular alveolar arcade within the genus Homo and points to an early divergence from contemporaneous African populations. Our results also ratify the affinities of H. antecessor with Neanderthals, although the precise relationship with this lineage needs further research.

Technical note: Micro-computed tomography calibration using dental tissue for bone mineral research.

Computed tomography (CT) and microcomputed tomography (µCT) require calibration against density phantoms scanned with specimens or during routine internal calibration for assessment of mineral concentration (MC) and density. In clinical studies involving bone, alternative calibration methods using bodily tissues and fluids ("phantomless" calibration) have been suggested. However, such tissues are seldom available in archeological and osteological research. This study investigates the potential of dental tissue as internal reference for calibration of µCT scans, facilitating the analysis of bone MC. We analyzed 70 molars from 24 extant primate species, including eight human teeth, each scanned with density phantoms for calibration. Our findings indicate that sampling specific regions of molars (lateral aspects of the mesial cusps) yields low variation in enamel and dentine MC values, averaging 1.27 g/cm3 (±0.03) for dentine and 2.25 g/cm3 (±0.03) for enamel. No significant differences were observed across molar types or among scanning procedures, including scanner model, resolution, and filters. An ad hoc test on 12 mandibles revealed low variance in MC between the conventional phantom and dental tissue calibration methods; all 36 measurements (low, medium, and high MC for each mandible) were within 0.05 g/cm3 of each other -81% were within 0.03 g/cm3 and 94% within 0.04 g/cm3. Based on these results, we propose a new "phantomless" calibration technique using these mean enamel and dentine MC values. The presented phantomless calibration method could aid in the assessment of bone pathology and enhance the scope of studies investigating bone structure and physical property variations in archeological, osteological, and laboratory-based research.

Sexual dimorphism in the enamel-dentine junction (EDJ) of permanent canines of European modern humans.

OBJECTIVES: Dental anthropological investigations into sexual dimorphism have conventionally concentrated on evaluating the dimensions and configuration of the enamel cap of canines. However, the morphology of the crown dentine surface can be closely linked to that of the enamel surface. This link can facilitate examination of crown morphology even when the enamel surface is slightly worn. Here, we determine if the morphology of the enamel-dentine junction (EDJ) differs within (maxillary vs. mandibular) and between a sample of male (n = 26) and female (n = 21) contemporary human permanent canines from Europe. METHODS: The morphological data of the EDJ were gathered employing a template comprising 96 landmarks and sliding semilandmarks. Subsequently, the data underwent analysis through form space principal component analysis following Procrustes registration, utilizing standard 3D geometric morphometric techniques. RESULTS: Significant differences in the morphology of the EDJ were observed between the sexes, particularly concerning the overall shape of the crown, the symmetry of the mesial and distal edges, and the development of the distal accessory ridge. CONCLUSIONS: Sex differences in the morphology of the EDJ could relate in part to retention of the canine-premolar honing complex in males. Our results indicate that analyses of the permanent canine EDJ may potentially provide a novel method for estimating the sex of adult and nonadult skeletons.

Artificial neural networks reconstruct missing perikymata in worn teeth.

Dental evolutionary studies in hominins are key to understanding how our ancestors and close fossil relatives grew from the early stages of embryogenesis into adults. In a sense, teeth are like an airplane's 'black box' as they record important variables for assessing developmental timing, enabling comparisons within and between populations, species, and genera. The ability to discern this type of nuanced information is embedded in the nature of how tooth enamel and dentin form: incrementally and over years. This incremental growth leaves chronological indicators in the histological structure of enamel, visible on the crown surface as perikymata. These structures are used in the process of reconstructing the rate and timing of tooth formation. Unfortunately, the developmentally earliest growth lines in lateral enamel are quickly lost to wear once the tooth crown erupts. We developed a method to reconstruct these earliest, missing perilymata from worn teeth through knowledge of the later-developed, visible perikymata for all tooth types (incisors, canines, premolars, and molars) using a modern human dataset. Building on our previous research using polynomial regressions, here we describe an artificial neural networks (ANN) method. This new ANN method mostly predicts within 2 counts the number of perikymata present in each of the first three deciles of the crown height for all tooth types. Our ANN method for estimating perikymata lost through wear has two immediate benefits: more accurate values can be produced and worn teeth can be included in dental research. This tool is available on the open-source platform R within the package teethR released under GPL v3.0 license, enabling other researchers the opportunity to expand their datasets for studies of periodicity in histological growth, dental development, and evolution.