RESUMO
Broadband near-infrared light emitting tunnel junctions are demonstrated with efficient coupling to a silicon photonic waveguide. The metal oxide semiconductor devices show long hybrid photonic-plasmonic mode propagation lengths of approximately 10 µm and thus can be integrated into an overcoupled resonant cavity with quality factor Q ≈ 49, allowing for tens of picowatt near-infrared light emission coupled directly into a waveguide. The electron inelastic tunneling transition rate and the cavity mode density are modeled, and the transverse magnetic (TM) hybrid mode excitation rate is derived. The results coincide well with polarization resolved experiments. Additionally, current-stressed devices are shown to emit unpolarized light due to radiative recombination inside the silicon electrode.
RESUMO
A dual sideband reception scheme for radio-over fiber (RoF) links is introduced. It is shown that the new receiver can increase the performance of noise-limited systems by up to 3â dB (2.97â dB in a lab back-to-back experiment). The receiver scheme exploits the fact that current RoF links do not realize their full potential. This is because in typical RoF receivers, the radio-frequency (RF) signals are mapped back to the optical domain by means of electro-optical modulator. In this process energy typically is lost as only one of the two generated sidebands is subsequently used. The suggested receiver exploits the signal of both sidebands. The receiver scheme was subsequently tested in a full optical-RF-optical transmission link at RF carrier frequencies of 228â GHz over a free-space channel spanning distances of 1400 m for symbol rates of up to 48 Gbaud 4 QAM. Here, we could achieve SNR improvements of up to 2.6â dB.
RESUMO
This paper introduces a simple method for the measurement of the relative permittivity and the Pockels coefficient of electro-optic (EO) materials in a waveguide up to sub-THz frequencies. By miniaturizing the device and making use of plasmonics, the complexities of traditional methods are mitigated. This work elaborates the fabrication tolerance and simplicity of the method, and highlights its applicability to various materials, substrates and configurations. The method is showcased using drop-casted perovskite barium titanate (BaTiO3, BTO) nano-particle thin-films and it has previously been used to measure epitaxial thin film BTO. In this work we show the effective relative permittivity of drop casted BTO to be εeff â¼ 30 at 200â MHz, dropping to â¼ 18 at 67â GHz and similarly, the effective Pockels coefficient was found to be reff â¼ 16 at 350â MHz and â¼ 8 at 70â GHz. These values are a factor > 50 below the values found for thin film BTO. Yet, the fact that the method can be applied to such different samples and Pockels strengths gives testimony to its versatility and sensitivity.
RESUMO
Highly efficient coupling of light from an optical fiber to silicon nitride (SiN) photonic integrated circuits (PICs) is experimentally demonstrated with simple and fabrication-tolerant grating couplers (GC). Fully etched amorphous silicon gratings are formed on top of foundry-produced SiN PICs in a back-end-of-the-line (BEOL) process, which is compatible with 248 nm deep UV lithography. Metallic back reflectors are introduced to enhance the coupling efficiency (CE) from -1.11 to -0.44 dB in simulation and from -2.2 to -1.4 dB in experiments for the TE polarization in the C-band. Furthermore, these gratings can be optimized to couple both TE and TM polarizations with a CE below -3 dB and polarization-dependent losses under 1 dB over a wavelength range of 40 nm in the O-band. This elegant approach offers a simple solution for the realization of compact and, at the same time, highly efficient coupling schemes in SiN PICs.