A Three-Dimensional Paper-Based Isoelectric Focusing Device for Direct Analysis of Proteins in Physiological Samples.

On-site protein analysis is crucial for disease diagnosis in community and family medicine in which microfluidic paper-based analytical devices (µPADs) have attracted growing attention. However, the practical applications of µPADs in protein analysis for physiological samples with high complexity is still limited. Herein, we developed a three-dimensional (3D) paper-based isoelectric focusing (IEF) platform, which is composed of power supply, reservoirs, and separation channel and made by the origami and stacking method, to simultaneously separate and enrich proteins in both low-salt and high-salt samples. Under the optimized experimental conditions, standard proteins (bovine hemoglobin (BHb) and phycocyanin (Phy)) were separated within 18 min under a 36 V power supply and obtained a 10-fold enrichment using the 3D paper-based IEF platform. Then, the capability of the 3D paper-based IEF platform for direct pretreatment of high-salt samples using a 12 V battery as power supply was measured through separating three standard proteins in saline (0.9% NaCl) with separation resolution (SR) > 1.29. Through further coupling with colorimetric and lateral flow strip measurements, the 3D paper-based IEF platform was applied to directly pretreat and quantitatively analyze microalbuminuria and C-reactive proteins in clinical urine and serum samples with analytical results with relative deviations of <8.4% and < 13.1%, respectively, to the clinical test results. This work proposes a new strategy to minimize the difficulty of directly processing high-salt samples with the traditional IEF system and provides a versatile, miniaturized, and low voltage demand analytical platform for on-site analysis of proteins in physiological samples.

Liquid Plasticine Integrated with Isoelectric Focusing for Miniaturized Protein Analysis.

Developing miniaturized and rapid protein analytical platforms is urgently needed for on-site protein analysis, which is important for disease diagnosis and monitoring. Liquid marbles (LMs), a kind of particle-coated droplets, as ideal microreactors have been used in various fields. However, their application as analytical platforms is limited due to the difficulty of pretreating complex samples in simple LMs. Herein, inspired by the microfluidic chip, we propose a strategy through fabricating fluid channels using deformable LM, termed liquid plasticine (LP), to achieve sample pretreatment function. Through combining isoelectric focusing (IEF) with an LP channel, an LP-IEF platform with simultaneous protein separation and concentration functions is realized. The pretreatment capability of the LP-IEF system for proteins in physiological samples is proven using standard proteins and human serum with the results of a clear separation, 10-fold concentration, and a resolution of 0.03 pH. Through cutting the LP after IEF to LMs and transiting isolated LMs containing target proteins for further downstream colorimetric and mass spectrometry measurements, the quantitative analysis of clinical microalbuminuria and identification of α-1-microglobulin/bikunin precursor in clinical diabetic urine samples are achieved. This work proposes a strategy to develop LMs/LPs as a multifunctional integrated analytical platform and the miniaturized LP-IEF device as a rapid protein analytical platform.

Simultaneous pre-concentration and separation on simple paper-based analytical device for protein analysis.

In this work, fast isoelectric focusing (IEF) was successfully implemented on an open paper fluidic channel for simultaneous concentration and separation of proteins from complex matrix. With this simple device, IEF can be finished in 10 min with a resolution of 0.03 pH units and concentration factor of 10, as estimated by color model proteins by smartphone-based colorimetric detection. Fast detection of albumin from human serum and glycated hemoglobin (HBA1c) from blood cell was demonstrated. In addition, off-line identification of the model proteins from the IEF fractions with matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF-MS) was also shown. This PAD IEF is potentially useful either for point of care test (POCT) or biomarker analysis as a cost-effective sample pretreatment method.

Liquid Plasticine-Based Electrokinetic Enrichment of Proteins.

Protein analysis is an important approach for disease diagnosis, in which sample pretreatment is an essential step since protein samples are often complex and many protein biomarkers are of low abundance. Here, given the good openness and light transmission of liquid plasticine (LP), which is a liquid entity formed by SiO2 nanoparticles and encapsulated aqueous solution, we developed a LP-based field-amplified sample stacking (FASS) system for protein enrichment. The system was composed of a LP container, a sample solution and a Tris-HCl solution containing hydroxyethyl cellulose (HEC). The system design, mechanism investigation, optimization of experimental parameters and characterization of LP-FASS performance for protein enrichment were well studied. Under the optimized experimental conditions of 1 % HEC, 100 mm Tris-HCl and 100 V in the LP-FASS system, a 40-80 times enrichment of proteins was obtained in 40 min using bovine hemoglobin (BHb) as the model protein using the constructed LP-FASS system. The simultaneous enrichment of multiple proteins (phycocyanin, BHb and cytochrome C) was also realized using the system. The LP-FASS system can serve as a new platform for protein enrichment which is easy to be combined with online and offline detections.

Machining water through laser cutting of nanoparticle-encased water pancakes.

Due to the inherent disorder and fluidity of water, precise machining of water through laser cutting are challenging. Herein we report a strategy that realizes the laser cutting machining of water through constructing hydrophobic silica nanoparticle-encased water pancakes with sub-millimeter depth. Through theoretical analysis, numerical simulation, and experimental studies, the developed process of nanoparticle-encased water pancake laser cutting and the parameters that affect cutting accuracy are verified and elucidated. We demonstrate that laser-fabricated water patterns can form diverse self-supporting chips (SSCs) with openness, transparency, breathability, liquid morphology, and liquid flow control properties. Applications of laser-fabricated SSCs to various fields, including chemical synthesis, biochemical sensing, liquid metal manipulation, patterned hydrogel synthesis, and drug screening, are also conceptually demonstrated. This work provides a strategy for precisely machining water using laser cutting, addressing existing laser machining challenges and holding significance for widespread fields involving fluid patterning and flow control in biological, chemical, materials and biomedical research.

Online sample clean-up and enrichment of proteins from salty media with dynamic double gradients on a paper fluidic channel.

Paper-based analytical device (PAD) has received more and more attention in the field of point-of-care test (POCT) due to its low cost, portability and simple operation. Sensitivity and selectivity are two important aspects in clinical diagnostic analysis. However, low sensitivity of a PAD limits its wider application for POCT. Here we introduced a PAD that can clean and enrich the protein content from salty media with both electric field (E) and pH gradient (double E/pH gradients), with which 100-fold enrichment effect could be achieved within 70 s as demonstrated by fluorescein isothiocyanate labeled bovine serum albumin (FITC-BSA) from artificial urine media. With post staining of the protein stacking band with bromophenol blue (BPB), selective colorimetric detection of human serum albumin (HSA) was achieved simply with smartphone camera in the clinically significant range of 10-300 mg‧L-1 (R2 = 0.99) with a limit of detection (LOD) of 4.9 mg‧L-1. Detection of microalbuminuria (MAU) of diabetic patients was demonstrated with this method without difference (ɑ = 0.01) to that by the clinical method (immunoturbidimetry). This work demonstrated the potential of this PAD method in online sample pretreatment and detection of target component from complex physiological samples.

Novel field amplification for sensitive colorimetric detection of microalbuminuria on a paper-based analytical device.

Field-amplified stacking (FAS) is a commonly used method for enhancing the sensitivity of charged species from low conductive media in capillary electrophoresis. FAS also showed significant sensitivity enhancement effect on a uniform paper fluidic channel by proper design of the electrolyte. In this paper, a novel method of introducing electric field gradient is proposed by geometry design of a 2D paper fluidic channel, and field amplification effect was successfully demonstrated with reduced requirement on the sample's conductivity. Sensitive colorimetric detection of microalbuminuria (MAU) from urine samples was demonstrated by mobile phone camera. Experimental results showed that, with active electric field motivation, up to 93.5% of the loaded protein probe could be effectively transferred and stacked into a narrow band on the newly designed paper fluidic channel. A limit of detection (LOD) of 6.5 mg‧L-1 HSA was achieved with a dynamic range of 10-300 mg‧L-1 (linear in the range of 10-100 mg‧L-1, R2 = 0.991). Combined with selective staining of albumin with bromophenol blue (BPB), the established method was applied to the detection of MAU from clinical urine samples, and consistent results with that of the clinical method were obtained. With this paper-based analytical device (PAD), MAU from highly conductive urine samples can be directly loaded and detected without any pretreatment. This method provides a way to develop highly sensitive point-of-care test (POCT) for rapid screening of some diseases.

Highly efficient sample stacking by enhanced field amplification on a simple paper device.

We present a novel electrokinetic stacking (ES) method based on field amplification on a simple paper device for sample preconcentration. With voltage application, charged probe ions in a solution of lower conductivity stack and form a narrow band at the boundary between the sample and the background electrolyte of higher conductivity. The stacking band appears quickly and stabilizes in a few minutes. With this ES method, three orders of magnitude signal improvement was successfully achieved for both a fluorescein probe and a double-stranded DNA within 300 s. This enhanced stacking efficiency is attributed to a focusing effect due to the balance between electromigration and counter electroosmotic flow. We also applied this ES method to other low-cost fiber substrates such as cloth and thread. Such a simple and highly efficient ES method will find wide applications in the development of sensitive paper-based analytical devices (PADs), especially for low-cost point-of-care testing (POCT).