Exploring LoRaWAN Traffic: In-Depth Analysis of IoT Network Communications.

In the past decade, Long-Range Wire-Area Network (LoRaWAN) has emerged as one of the most widely adopted Low Power Wide Area Network (LPWAN) standards. Significant efforts have been devoted to optimizing the operation of this network. However, research in this domain heavily relies on simulations and demands high-quality real-world traffic data. To address this need, we monitored and analyzed LoRaWAN traffic in four European cities, making the obtained data and post-processing scripts publicly available. For monitoring purposes, we developed an open-source sniffer capable of capturing all LoRaWAN communication within the EU868 band. Our analysis discovered significant issues in current LoRaWAN deployments, including violations of fundamental security principles, such as the use of default and exposed encryption keys, potential breaches of spectrum regulations including duty cycle violations, SyncWord issues, and misaligned Class-B beacons. This misalignment can render Class-B unusable, as the beacons cannot be validated. Furthermore, we enhanced Wireshark's LoRaWAN protocol dissector to accurately decode recorded traffic. Additionally, we proposed the passive reception of Class-B beacons as an alternative timebase source for devices operating within LoRaWAN coverage under the assumption that the issue of misaligned beacons can be addressed or mitigated in the future. The identified issues and the published dataset can serve as valuable resources for researchers simulating real-world traffic and for the LoRaWAN Alliance to enhance the standard to facilitate more reliable Class-B communication.

On the Role of Training Data for SVM-Based Microwave Brain Stroke Detection and Classification.

The aim of this work was to test microwave brain stroke detection and classification using support vector machines (SVMs). We tested how the nature and variability of training data and system parameters impact the achieved classification accuracy. Using experimentally verified numerical models, a large database of synthetic training and test data was created. The models consist of an antenna array surrounding reconfigurable geometrically and dielectrically realistic human head phantoms with virtually inserted strokes of arbitrary size, and different dielectric parameters in different positions. The generated synthetic data sets were used to test four different hypotheses, regarding the appropriate parameters of the training dataset, the appropriate frequency range and the number of frequency points, as well as the level of subject variability to reach the highest SVM classification accuracy. The results indicate that the SVM algorithm is able to detect the presence of the stroke and classify it (i.e., ischemic or hemorrhagic) even when trained with single-frequency data. Moreover, it is shown that data of subjects with smaller strokes appear to be the most suitable for training accurate SVM predictors with high generalization capabilities. Finally, the datasets created for this study are made available to the community for testing and developing their own algorithms.

Low-cost and prototype-friendly method for biocompatible encapsulation of implantable electronics with epoxy overmolding, hermetic feedthroughs and P3HT coating.

The research of novel implantable medical devices is one of the most attractive, yet complex areas in the biomedical field. The design and development of sufficiently small devices working in an in vivo environment is challenging but successful encapsulation of such devices is even more so. Industry-standard methods using glass and titanium are too expensive and tedious, and epoxy or silicone encapsulation is prone to water ingress with cable feedthroughs being the most frequent point of failure. This paper describes a universal and straightforward method for reliable encapsulation of circuit boards that achieves ISO10993 compliance. A two-part PVDF mold was machined using a conventional 3-axis machining center. Then, the circuit board with a hermetic feedthrough was placed in the mold and epoxy resin was injected into the mold under pressure to fill the cavity. Finally, the biocompatibility was further enhanced with an inert P3HT polymer coating which can be easily formulated into an ink. The biocompatibility of the encapsulants was assessed according to ISO10993. The endurance of the presented solution compared to silicone potting and epoxy potting was assessed by submersion in phosphate-buffered saline solution at 37 °C. The proposed method showed superior results to PDMS and simple epoxy potting.

Adiponectin relation to skin changes and dyslipidemia in systemic sclerosis.

OBJECTIVES: Adiponectin was initially described as a regulator of metabolic homeostases. Further studies demonstrated its involvement in the regulation of inflammatory diseases, particularly rheumatic and vascular diseases and some fibrotic processes. The aim of this study was to evaluate adiponectin in the circulation of patients with systemic sclerosis (SSc) and characterise its potential association with skin changes and SSc-related features. METHODS: Serum levels of adiponectin, interleukin-6 and soluble receptor for interleukin-2 (by ELISA), lipid levels, CRP (by turbidimetry), ANA (by immunofluorescence), autoantibodies of the ENA complex (by immunoblot) and urine levels of pyridinoline and deoxypyridinoline (by HPLC) were measured in 39 patients with SSc, and adiponectin levels were determined in 30 healthy controls matched by age, sex, and body mass index (BMI). Organ manifestations were recorded and skin changes were assessed using the modified Rodnan skin score. RESULTS: Adiponectin serum levels were similar between patients with SSc and healthy controls (median (IQR), 6.9 (5.9-9.1) vs. 7.8 (6.2-9.5)µg/ml, p=0.670). Levels of serum (ln) adiponectin were negatively correlated with the skin score (r=-0.379, p=0.017). Regression analysis of the relationship between adiponectin and markers of interest provided two statistically significant models: A- with explanatory variables HDL-cholesterol, skin score, disease duration, age (R(2)=0.580); and B- with CRP, skin score, age (R(2)=0.550); in order of a decreasing influence. CONCLUSION: Based on the results of this study, it might be speculated that adiponectin plays a protective role in skin- and atherosclerosis-related changes during SSc.

Microwave Catheter Navigation System for the Radiofrequency Liver Ablation.

Thermal ablation is a well-known method used in interventional radiology to treat cancer. The treatment success is closely related to the exact catheter location in the treated area. Current navigation methods are based mostly on ultrasound or computed tomography. This work explores the possibility of tracking the catheter position during ablation treatment of hepatocellular carcinomas (HCC) using an ultra-wideband (UWB) antenna array and microwave radar imaging based on the "Delay and Sum" (DAS) algorithm. The feasibility was first numerically studied on a simple homogeneous liver model. A heterogeneous anthropomorphic 3D model of the treated region consisting of the main organs within the treated area was then used. Various standard radiofrequency ablation (RFA) catheters were placed virtually in the heterogeneous model. The location and orientation of the antenna elements of the developed imaging system and the applied frequency band were studied. Subsequently, an experimental setup consisting of a 3D printed homogeneous anthropomorphic model, eight UWB dipole antennas, and catheters was created and used in a series of measurements. The average accuracy determining the catheter position from simulated and experimental data was 3.88 ± 0.19 and 6.13 ± 0.66 mm, which are close to the accuracy of clinical navigation systems.

Construction of a Wireless-Enabled Endoscopically Implantable Sensor for pH Monitoring with Zero-Bias Schottky Diode-based Receiver.

Ambulatory pH monitoring of pathological reflux is an opportunity to observe the relationship between symptoms and exposure of the esophagus to acidic or non-acidic refluxate. This paper describes a method for the development, manufacturing, and implantation of a miniature wireless-enabled pH sensor. The sensor is designed to be implanted endoscopically with a single hemostatic clip. A fully passive rectenna-based receiver based on a zero-bias Schottky diode is also constructed and tested. To construct the device, a two-layer printed circuit board and off-the-shelf components were used. A miniature microcontroller with integrated analog peripherals is used as an analog front end for the ion-sensitive field-effect transistor (ISFET) sensor and to generate a digital signal which is transmitted with an amplitude shift keying transmitter chip. The device is powered by two primary alkaline cells. The implantable device has a total volume of 0.6 cm3 and a weight of 1.2 grams, and its performance was verified in an ex vivo model (porcine esophagus and stomach). Next, a small footprint passive rectenna-based receiver which can be easily integrated either into an external receiver or the implantable neurostimulator, was constructed and proven to receive the RF signal from the implant when in proximity (20 cm) to it. The small size of the sensor provides continuous pH monitoring with minimal obstruction of the esophagus. The sensor could be used in routine clinical practice for 24/96 h esophageal pH monitoring without the need to insert a nasal catheter. The "zero-power" nature of the receiver also enables the use of the sensor for automatic in-vivo calibration of miniature lower esophageal sphincter neurostimulation devices. An active sensor-based control enables the development of advanced algorithms to minimize the used energy to achieve a desirable clinical outcome. One of the examples of such an algorithm would be a closed-loop system for on-demand neurostimulation therapy of gastroesophageal reflux disease (GERD).

Development of Radiofrequency Ablation Generator and Balloon-Based Catheter for Microendoluminal Thin-Layer Ablation Therapy Using the Rat Duodenum as a Model of Low-Impedance Tissue.

Radiofrequency ablation (RFA) is a routinely used, safe, and effective method for the tissue destruction. Often, in case of its application in malignant conditions, the extent of tissue destruction is insufficient due to the size of the target lesion, as well as due to the risk of heat-induced damage to the surrounding organs. Nevertheless, there are conditions requiring superficial precise-depth ablation with preservation of deeper layers. These are represented, for example, by mucosal resurfacing in case of Barrett's esophagus or treatment of recurrent mucosal bleeding in case of chronic radiation proctitis. Recently, new indications for intraluminal RFA use emerged, especially in the pancreatobiliary tract. In the case of intraductal use of RFA (e.g., biliary and pancreatic tract), there are currently available rigid and needle tip catheters. An expandable balloon-based RFA catheter suitable for use in such small-diameter tubular organs could be of benefit due to possible increase of contact between the probe and the target tissue; however, to prevent excessive tissue damage, a compatible generator suitable for low-impedance catheter/tissue is essential. This project aimed to develop a radiofrequency ablation generator and bipolar balloon-based catheter optimized for the application in the conditions of low-impedance tissue and (micro)endoluminal environment. Subsequent evaluation of biological effect in vivo was performed using duodenal mucosa in Wistar rat representing conditions of endoluminal radiofrequency ablation of low-impedance tissue. Experiments confirming the safety and feasibility of RFA with our prototype devices were conducted.

Autonomous and Rechargeable Microneurostimulator Endoscopically Implantable into the Submucosa.

Gastric dysmotility can be a sign of common diseases such as longstanding diabetes mellitus. It is known that the application of high-frequency low-energetic stimulation can help to effectively moderate and alleviate the symptoms of gastric dysmotility. The goal of the research was the development of a miniature, endoscopically implantable device to a submucosal pocket. The implantable device is a fully customized electronic package which was specifically designed for the purpose of experiments in the submucosa. The device is equipped with a lithium-ion battery which can be recharged wirelessly by receiving an incident magnetic field from the charging/transmitting coil. The uplink communication is achieved in a MedRadio band at 432 MHz. The device was endoscopically inserted into the submucosal pocket of a live domestic pig used as an in vivo model, specifically in the stomach antrum. The experiment confirmed that the designed device can be implanted into the submucosa and is capable of bidirectional communication. The device can perform bipolar stimulation of muscle tissue.

Validity of the Montreal Cognitive Assessment in the detection of cognitive dysfunction in Huntington's disease.

The purpose of this study was to assess the convergent and discriminative validity of the Montreal Cognitive Assessment (MoCA) as a screening tool for cognitive dysfunction in Huntington's disease (HD). Twenty HD patients with cognitive deficit and 23 normal controls (NC) without cognitive deficit were matched for age, sex, and education. The mean MoCA score was 20.5 (SD = 5.5) in HD and 27.5 (SD = 2.2) in NC. The MoCA correlated in both samples with the brief cognitive battery composite score (r = .81, p < .001). With the screening and diagnostic cutoff scores determined at <26 points, the MoCA showed a sensitivity of 94% and a specificity of 84% in the detection of cognitive dysfunction in HD. The area under the receiver-operating characteristics curve (95% confidence interval) for the MoCA was 0.90 (0.809-0.997), p < .001. Our results show that the MoCA is a suitable tool for assessing cognitive dysfunction in patients with HD.