RESUMO
In absence of external torque, plasma rotation in tokamaks results from a balance between collisional magnetic braking and turbulent drive. The outcome of this competition and cooperation is essential to determine the plasma flow. A reduced model, supported by gyrokinetic simulations, is first used to explain and quantify the competition only. The ripple amplitude above which magnetic drag overcomes turbulent viscosity is obtained. The synergetic impact of ripple on the turbulent toroidal Reynolds stress is explored. Simulations show that the main effect comes from an enhancement of the radial electric field shear by the ripple, which in turn impacts the residual stress.
RESUMO
The new JET ITER-like wall (made of beryllium and tungsten) is more fragile than the former carbon fiber composite wall and requires active protection to prevent excessive heat loads on the plasma facing components (PFC). Analog CCD cameras operating in the near infrared wavelength are used to measure surface temperature of the PFCs. Region of interest (ROI) analysis is performed in real time and the maximum temperature measured in each ROI is sent to the vessel thermal map. The protection of the ITER-like wall system started in October 2011 and has already successfully led to a safe landing of the plasma when hot spots were observed on the Be main chamber PFCs. Divertor protection is more of a challenge due to dust deposits that often generate false hot spots. In this contribution we describe the camera, data capture and real time processing systems. We discuss the calibration strategy for the temperature measurements with cross validation with thermal IR cameras and bi-color pyrometers. Most importantly, we demonstrate that a protection system based on CCD cameras can work and show examples of hot spot detections that stop the plasma pulse. The limits of such a design and the associated constraints on the operations are also presented.