RESUMO
Late-stage derivatization of drug-like functional groups can accelerate drug discovery efforts by swiftly exchanging hydrogen-bond donors with acceptors, or by modulating key physicochemical properties like logP, solubility, or polar surface area. A proven derivatization strategy to improve ligand potency is to extend the ligand to displace water molecules that are mediating the interactions with a receptor. Inspired by this application, we developed a method to regioselectively transmute the nitrogen atom from pyridine into carbon bearing an ester, a flexible functional group handle. We applied this method to a variety of substituted pyridines, as well as late-stage transformation of FDA-approved drugs.
RESUMO
PURPOSE: The purpose of this work is to evaluate the interrelationship of microstructure, properties, and dissolution performance for amorphous solid dispersions (ASDs) prepared using different methods. METHODS: ASD of GDC-0810 (50% w/w) with HPMC-AS was prepared using methods of spray drying and co-precipitation via resonant acoustic mixing. Microstructure, particulate and bulk powder properties, and dissolution performance were characterized for GDC-0810 ASDs. In addition to application of typical physical characterization tools, we have applied X-Ray Microscopy (XRM) to assess the contribution of microstructure to the characteristics of ASDs and obtain additional quantification and understanding of the drug product intermediates and tablets. RESULTS: Both methods of spray drying and co-precipitation produced single-phase ASDs. Distinct differences in microstructure, particle size distribution, specific surface area, bulk and tapped density, were observed between GDC-0810 spray dried dispersion (SDD) and co-precipitated amorphous dispersion (cPAD) materials. The cPAD powders prepared by the resonant acoustic mixing process demonstrated superior compactibility compared to the SDD, while the compressibility of the ASDs were comparable. Both SDD powder and tablets showed higher in vitro dissolution than those of cPAD powders. XRM calculated total solid external surface area (SA) normalized by calculated total solid volume (SV) shows a strong correlation with micro dissolution data. CONCLUSION: Strong interrelationship of microstructure, physical properties, and dissolution performance was observed for GDC-0810 ASDs. XRM image-based analysis is a powerful tool to assess the contribution of microstructure to the characteristics of ASDs and provide mechanistic understanding of the interrelationship.
Assuntos
Liberação Controlada de Fármacos , Solubilidade , Pós , Composição de Medicamentos/métodos , Comprimidos/químicaRESUMO
The fragility index ( m) and conversely the strength parameter ( D) are widely used to categorize glass forming liquids and are used to characterize temperature dependency of viscosity and relaxation time as the supercooled liquid approaches glass transition. The currently used calorimetric methods in pharmaceutical literature lead to wide variability in measured values of m. In this work, a modulated differential scanning calorimetry (DSC) method is introduced that can directly determine m with minimal variability. Although calorimetric fragility is easy to measure due to availability and ease of use of DSC, there is no correlation between calorimetric and dielectric fragility (calculated spectroscopically from relaxation times). In addition, there is also no correlation between calorimetric fragility and the so-called "thermodynamic fragility" that can be calculated using only thermodynamic parameters. No relationship can be found between the crystallization propensity in the supercooled liquid state and D. However, the crystallization propensity shows a reasonable correlation with the Kohlrausch distribution parameter ßk, which defines the breadth of the relaxation time distribution.
Assuntos
Varredura Diferencial de Calorimetria/métodos , Química Farmacêutica/métodos , Espectroscopia Dielétrica/métodos , Preparações Farmacêuticas/química , Cristalização , Temperatura , Termodinâmica , ViscosidadeRESUMO
11ß-Hydroxyprogesterone is a well-known nonselective inhibitor of 11ß-hydroxysteroid dehydrogenase (11ßHSD) types 1 and 2. It also activates the mineralocorticoid receptor (MR). Modulation of corticosteroid action by inhibition of 11ßHSDs or blocking MR is currently under consideration for treatment of electrolyte disturbances, metabolic diseases and chronic inflammatory disorders. We established conditions to synthesize sterically demanding 11ß-aminoprogesterone, which following subsequent nucleophilic or reductive amination, allowed extension of the amino group to prepare amino acid derivatives. Biological testing revealed that some of the 11ß-aminoprogesterone derivatives selectively inhibit 11ßHSD2. Moreover, two compounds that did not significantly inhibit 11ßHSDs had antagonist properties on MR. The 11ß-aminoprogesterone derivatives form a basis for the further development of improved modulators of corticosteroid action.
Assuntos
11-beta-Hidroxiesteroide Desidrogenases/antagonistas & inibidores , Inibidores Enzimáticos/síntese química , Antagonistas de Receptores de Mineralocorticoides/síntese química , Receptores de Mineralocorticoides/química , 11-beta-Hidroxiesteroide Desidrogenases/metabolismo , Aminação , Aminoácidos/química , Animais , Células COS , Chlorocebus aethiops , Inibidores Enzimáticos/química , Inibidores Enzimáticos/metabolismo , Células HEK293 , Humanos , Antagonistas de Receptores de Mineralocorticoides/química , Antagonistas de Receptores de Mineralocorticoides/metabolismo , Oxirredução , Progesterona/análogos & derivados , Progesterona/síntese química , Progesterona/metabolismo , Ligação Proteica , Receptores de Mineralocorticoides/genética , Receptores de Mineralocorticoides/metabolismoRESUMO
Cysteine-containing dipeptides 3a-l, (3b+3b') (compound numbers in parentheses are used to indicate racemic mixtures; thus (3b+3b') is the racemate of 3b and 3b'), and tripeptide 13 were synthesized in 68-96% yields by acylation of cysteine with N-(Pg-α-aminoacyl)- and N-(Pg-α-dipeptidoyl)benzotriazoles (where Pg stands for protecting group in the nomenclature for peptides throughout the paper) in the presence of Et(3)N. Cysteine-containing peptides 3a-l and 13 were S-acylated to give S-(Pg-α-aminoacyl)dipeptides 5a-l and S-(Pg-α-aminoacyl)tripeptide 14 without racemization in 47-90% yields using N-(Pg-α-aminoacyl)benzotriazoles 2 in CH(3)CN-H(2)O (7:3) in the presence of KHCO(3). (In our peptide nomenclature, the prefixes di-, tri-, etc. refer to the number of amino acid residues in the main peptide chain; amino acid residues attached to sulfur are designated as S-acyl peptides. Thus we avoid use of the prefix "iso".) Selective S-acylations of serine peptide 3k and threonine peptide 3l containing free OH groups were thus achieved in 58% and 72% yield, respectively. S-(Pg-α-aminoacyl)cysteines 4a,b underwent native chemical ligations to form native dipeptides 3f,i via 5-membered cyclic transition states. Microwave irradiation of S-(Pg-α-aminoacyl)tripeptide 15 and S-(Pg-α-aminoacyl)tetrapeptide 17 in the presence of NaH(2)PO(4)/Na(2)HPO(4) buffer solution at pH 7.8 achieved chemical ligations, involving intramolecular migrations of acyl groups, via 11- and 14-membered cyclic transition states from the S-atom of a cysteine residue to a peptide terminal amino group to form native peptides 19 and 20 in isolated yields of 26% and 23%, respectively.
Assuntos
Cisteína/química , Peptídeos Cíclicos/química , Peptídeos/química , Triazóis/química , Acilação , Hidróxidos/química , Espectroscopia de Ressonância Magnética , Micro-Ondas , Estrutura Molecular , Especificidade por Substrato , Enxofre/químicaRESUMO
Usage of the amorphous phase of compounds has become the method of choice to overcome oral bioavailability problems related to poor solubility. Due to the unstable nature of glasses, it is clear that the method of preparation of the amorphous glass will have an impact on physical/chemical stability and in turn in vivo performance. The method of preparation can also have a profound impact on the mechanical properties of the amorphous phase. We have explored the impact of preparation method on the mechanical properties of an amorphous solid dispersion using a development compound, GDC-0810. Three methods were used to generate amorphous solid dispersions (ASDs) of 50% GDC-0810 with hydroxypropyl methylcellulose acetate succinate: (1) spray drying, (2) coprecipitation using overhead mixing, and (3) coprecipitation using resonant acoustic mixing. All 3 methods were found to generate ASDs with good phase mixing and similar glass transition temperatures. Coprecipitated ASD powders (overhead mixing and resonant acoustic mixing) demonstrated superior tabletability and flow properties when compared to the spray drying powder. Careful choice of manufacturing process can be used to tune material properties of ASDs to make them more amenable for downstream operations like tableting. Acoustic mixing has been demonstrated as a scalable new method to make ASDs through coprecipitation.
Assuntos
Cinamatos/química , Composição de Medicamentos/métodos , Excipientes/química , Indazóis/química , Metilcelulose/análogos & derivados , Cristalização , Composição de Medicamentos/instrumentação , Desenho de Equipamento , Metilcelulose/química , Transição de Fase , Solubilidade , Temperatura de TransiçãoRESUMO
We previously identified two small molecules targeting the HIV-1 gp41, N-(4-carboxy-3-hydroxy)phenyl-2,5-dimethylpyrrole 12 (NB-2) and N-(3-carboxy-4-chloro)phenylpyrrole 13 (NB-64), that inhibit HIV-1 infection at low micromolar levels. On the basis of molecular docking analysis, we designed a series of 2-aryl 5-(4-oxo-3-phenethyl-2-thioxothiazolidinylidenemethyl)furans. Compared with 12 and 13, these compounds have bigger molecular size (437-515 Da) and could occupy more space in the deep hydrophobic pocket on the gp41 NHR trimer. Fifteen 2-aryl 5-(4-oxo-3-phenethyl-2-thioxothiazolidinylidenemethyl)furans (11a-o) were synthesized by Suzuki-Miyaura cross-coupling followed by a Knoevenagel condensation and tested for their anti-HIV-1 activity and cytotoxicity on MT-2 cells. We found that all 15 compounds had improved anti-HIV-1 activity and 3 of them (11a, 11b, and 11d) exhibited inhibitory activity against replication of HIV-1(IIIB) and 94UG103 at <100 nM range, more than 20-fold more potent than 12 and 13, suggesting that these compounds can serve as leads for development of novel small molecule HIV fusion inhibitors.
Assuntos
Fármacos Anti-HIV/química , Fármacos Anti-HIV/farmacologia , Furanos/química , Furanos/farmacologia , HIV-1/efeitos dos fármacos , HIV-1/fisiologia , Internalização do Vírus/efeitos dos fármacos , Fármacos Anti-HIV/síntese química , Fármacos Anti-HIV/metabolismo , Linhagem Celular , Desenho de Fármacos , Furanos/síntese química , Furanos/metabolismo , Proteína gp41 do Envelope de HIV/química , Proteína gp41 do Envelope de HIV/metabolismo , Modelos Moleculares , Peso Molecular , Conformação Proteica , Relação Estrutura-AtividadeRESUMO
Simple, chiral, pyrrolidine-based diamine and triamine derivatives that incorporate the secondary-secondary diamine motif are efficient catalysts for the highly diastereoselective and enantioselective Michael addition of cyclic ketones to 2-nitrovinyl arenes. The highest selectivities are obtained when these catalysts are used in conjunction with protonic acids. Steric factors in the substrate and the size of the acid additive play an important role in stereoselection.