Monitoring Wheat Growth Using a Portable Three-Band Instrument for Crop Growth Monitoring and Diagnosis.

An instrument developed to monitor and diagnose crop growth can quickly and non-destructively obtain crop growth information, which is helpful for crop field production and management. Focusing on the problems with existing two-band instruments used for crop growth monitoring and diagnosis, such as insufficient information available on crop growth and low accuracy of some growth indices retrieval, our research team developed a portable three-band instrument for crop-growth monitoring and diagnosis (CGMD) that obtains a larger amount of information. Based on CGMD, this paper carried out studies on monitoring wheat growth indices. According to the acquired three-band reflectance spectra, the combined indices were constructed by combining different bands, two-band vegetation indices (NDVI, RVI, and DVI), and three-band vegetation indices (TVI-1 and TVI-2). The fitting results of the vegetation indices obtained by CGMD and the commercial instrument FieldSpec HandHeld2 was high and the new instrument could be used for monitoring the canopy vegetation indices. By fitting each vegetation index to the growth index, the results showed that the optimal vegetation indices corresponding to leaf area index (LAI), leaf dry weight (LDW), leaf nitrogen content (LNC), and leaf nitrogen accumulation (LNA) were TVI-2, TVI-1, NDVI (R730, R815), and NDVI (R730, R815), respectively. R2 values corresponding to LAI, LDW, LNC and LNA were 0.64, 0.84, 0.60, and 0.82, respectively, and their relative root mean square error (RRMSE) values were 0.29, 0.26, 0.17, and 0.30, respectively. The addition of the red spectral band to CGMD effectively improved the monitoring results of wheat LAI and LDW. Focusing the problem of vegetation index saturation, this paper proposed a method to construct the wheat-growth-index spectral monitoring models that were defined according to the growth periods. It improved the prediction accuracy of LAI, LDW, and LNA, with R2 values of 0.79, 0.85, and 0.85, respectively, and the RRMSE values of these growth indices were 0.22, 0.23, and 0.28, respectively. The method proposed here could be used for the guidance of wheat field cultivation.

Development of an Apparatus for Crop-Growth Monitoring and Diagnosis.

To non-destructively acquire leaf nitrogen content (LNC), leaf nitrogen accumulation (LNA), leaf area index (LAI), and leaf dry weight (LDW) data at high speed and low cost, a portable apparatus for crop-growth monitoring and diagnosis (CGMD) was developed according to the spectral monitoring mechanisms of crop growth. According to the canopy characteristics of crops and actual requirements of field operation environments, splitting light beams by using an optical filter and proper structural parameters were determined for the sensors. Meanwhile, an integral-type weak optoelectronic signal processing circuit was designed, which changed the gain of the system and guaranteed the high resolution of the apparatus by automatically adjusting the integration period based on the irradiance received from ambient light. In addition, a coupling processor system for a sensor information and growth model based on the microcontroller chip was developed. Field experiments showed that normalised vegetation index (NDVI) measured separately through the CGMD apparatus and the ASD spectrometer showed a good linear correlation. For measurements of canopy reflectance spectra of rice and wheat, their linear determination coefficients (R²) were 0.95 and 0.92, respectively while the root mean square errors (RMSEs) were 0.02 and 0.03, respectively. NDVI value measured by using the CGMD apparatus and growth indices of rice and wheat exhibited a linear relationship. For the monitoring models for LNC, LNA, LAI, and LDW of rice based on linear fitting of NDVI, R² were 0.64, 0.67, 0.63 and 0.70, and RMSEs were 0.31, 2.29, 1.15 and 0.05, respectively. In addition, R² of the models for monitoring LNC, LNA, LAI, and LDW of wheat on the basis of linear fitting of NDVI were 0.82, 0.71, 0.72 and 0.70, and RMSEs were 0.26, 2.30, 1.43, and 0.05, respectively.

Wireless Channel Propagation Characteristics and Modeling Research in Rice Field Sensor Networks.

Wireless channel propagation characteristics and models are important to ensure the communication quality of wireless sensor networks in agriculture. Wireless channel attenuation experiments were carried out at different node antenna heights (0.8 m, 1.2 m, 1.6 m, and 2.0 m) in the tillering, jointing, and grain filling stages of rice fields. We studied the path loss variation trends at different transmission distances and analyzed the differences between estimated values and measured values of path loss in a free space model and a two-ray model. Regression analysis of measured path loss values was used to establish a one-slope log-distance model and propose a modified two-slope log-distance model. The attenuation speed in wireless channel propagation in rice fields intensified with rice developmental stage and the transmission range had monotone increases with changes in antenna height. The relative error (RE) of estimation in the free space model and the two-ray model under four heights ranged from 6.48⁻15.49% and 2.09⁻13.51%, respectively, and these two models were inadequate for estimating wireless channel path loss in rice fields. The ranges of estimated RE for the one-slope and modified two-slope log-distance models during the three rice developmental stages were 2.40⁻2.25% and 1.89⁻1.31%, respectively. The one-slope and modified two-slope log-distance model had better applicability for modeling of wireless channels in rice fields. The estimated RE values for the modified two-slope log-distance model were all less than 2%, which improved the performance of the one-slope log-distance model. This validates that the modified two-slope log-distance model had better applicability in a rice field environment than the other models. These data provide a basis for modeling of sensor network channels and construction of wireless sensor networks in rice fields. Our results will aid in the design of effective rice field WSNs and increase the transmission quality in rice field sensor networks.

Node Deployment with k-Connectivity in Sensor Networks for Crop Information Full Coverage Monitoring.

Wireless sensor networks (WSNs) are suitable for the continuous monitoring of crop information in large-scale farmland. The information obtained is great for regulation of crop growth and achieving high yields in precision agriculture (PA). In order to realize full coverage and k-connectivity WSN deployment for monitoring crop growth information of farmland on a large scale and to ensure the accuracy of the monitored data, a new WSN deployment method using a genetic algorithm (GA) is here proposed. The fitness function of GA was constructed based on the following WSN deployment criteria: (1) nodes must be located in the corresponding plots; (2) WSN must have k-connectivity; (3) WSN must have no communication silos; (4) the minimum distance between node and plot boundary must be greater than a specific value to prevent each node from being affected by the farmland edge effect. The deployment experiments were performed on natural farmland and on irregular farmland divided based on spatial differences of soil nutrients. Results showed that both WSNs gave full coverage, there were no communication silos, and the minimum connectivity of nodes was equal to k. The deployment was tested for different values of k and transmission distance (d) to the node. The results showed that, when d was set to 200 m, as k increased from 2 to 4 the minimum connectivity of nodes increases and is equal to k. When k was set to 2, the average connectivity of all nodes increased in a linear manner with the increase of d from 140 m to 250 m, and the minimum connectivity does not change.

The Node Deployment of Intelligent Sensor Networks Based on the Spatial Difference of Farmland Soil.

Considering that agricultural production is characterized by vast areas, scattered fields and long crop growth cycles, intelligent wireless sensor networks (WSNs) are suitable for monitoring crop growth information. Cost and coverage are the most key indexes for WSN applications. The differences in crop conditions are influenced by the spatial distribution of soil nutrients. If the nutrients are distributed evenly, the crop conditions are expected to be approximately uniform with little difference; on the contrary, there will be great differences in crop conditions. In accordance with the differences in the spatial distribution of soil information in farmland, fuzzy c-means clustering was applied to divide the farmland into several areas, where the soil fertility of each area is nearly uniform. Then the crop growth information in the area could be monitored with complete coverage by deploying a sensor node there, which could greatly decrease the deployed sensor nodes. Moreover, in order to accurately judge the optimal cluster number of fuzzy c-means clustering, a discriminant function for Normalized Intra-Cluster Coefficient of Variation (NICCV) was established. The sensitivity analysis indicates that NICCV is insensitive to the fuzzy weighting exponent, but it shows a strong sensitivity to the number of clusters.