Buried interface molecular hybrid for inverted perovskite solar cells.

Perovskite solar cells (PSCs) with an "inverted" architecture are a key pathway for commercializing this emerging photovoltaic technology due to the better power conversion efficiency (PCE) and operational stability as compared to the "normal" device structure. Specifically, PCEs of the inverted PSCs have exceeded 25% owing to the development of improved self-assembled molecules (SAMs)1-5 and passivation strategies6-8. Nevertheless, poor wettability and agglomerations of SAMs9-12 will cause interfacial losses, impeding further improvement in PCE and stability. Herein, we report on molecular hybrid at the buried interface in inverted PSCs by co-assembling a multiple carboxylic acid functionalized aromatic compound of 4,4',4''-nitrilotribenzoicacid (NA) with a popular SAM of [4-(3,6-dime-thyl-9H-carbazol-9-yl)butyl]phosphonic acid (Me-4PACz) to improve the heterojunction interface. The molecular hybrid of Me-4PACz with NA could substantially improve the interfacial characteristics. The resulting inverted PSCs demonstrated a record-certified steady-state efficiency of 26.54%. Crucially, this strategy aligns seamlessly with large-scale manufacturing, achieving the highest certified PCE for inverted mini-modules at 22.74% (aperture area: 11.1 cm2). Our device also maintained 96.1% of its initial PCE after more than 2,400 hours of 1-sun operation in ambient air.

Lead immobilization for environmentally sustainable perovskite solar cells.

Lead halide perovskites are promising semiconducting materials for solar energy harvesting. However, the presence of heavy-metal lead ions is problematic when considering potential harmful leakage into the environment from broken cells and also from a public acceptance point of view. Moreover, strict legislation on the use of lead around the world has driven innovation in the development of strategies for recycling end-of-life products by means of environmentally friendly and cost-effective routes. Lead immobilization is a strategy to transform water-soluble lead ions into insoluble, nonbioavailable and nontransportable forms over large pH and temperature ranges and to suppress lead leakage if the devices are damaged. An ideal methodology should ensure sufficient lead-chelating capability without substantially influencing the device performance, production cost and recycling. Here we analyse chemical approaches to immobilize Pb2+ from perovskite solar cells, such as grain isolation, lead complexation, structure integration and adsorption of leaked lead, based on their feasibility to suppress lead leakage to a minimal level. We highlight the need for a standard lead-leakage test and related mathematical model to be established for the reliable evaluation of the potential environmental risk of perovskite optoelectronics.

Homogenizing out-of-plane cation composition in perovskite solar cells.

Perovskite solar cells with the formula FA1-xCsxPbI3, where FA is formamidinium, provide an attractive option for integrating high efficiency, durable stability and compatibility with scaled-up fabrication. Despite the incorporation of Cs cations, which could potentially enable a perfect perovskite lattice1,2, the compositional inhomogeneity caused by A-site cation segregation is likely to be detrimental to the photovoltaic performance of the solar cells3,4. Here we visualized the out-of-plane compositional inhomogeneity along the vertical direction across perovskite films and identified the underlying reasons for the inhomogeneity and its potential impact for devices. We devised a strategy using 1-(phenylsulfonyl)pyrrole to homogenize the distribution of cation composition in perovskite films. The resultant p-i-n devices yielded a certified steady-state photon-to-electron conversion efficiency of 25.2% and durable stability.

Stability-limiting heterointerfaces of perovskite photovoltaics.

Optoelectronic devices consist of heterointerfaces formed between dissimilar semiconducting materials. The relative energy-level alignment between contacting semiconductors determinately affects the heterointerface charge injection and extraction dynamics. For perovskite solar cells (PSCs), the heterointerface between the top perovskite surface and a charge-transporting material is often treated for defect passivation1-4 to improve the PSC stability and performance. However, such surface treatments can also affect the heterointerface energetics1. Here we show that surface treatments may induce a negative work function shift (that is, more n-type), which activates halide migration to aggravate PSC instability. Therefore, despite the beneficial effects of surface passivation, this detrimental side effect limits the maximum stability improvement attainable for PSCs treated in this way. This trade-off between the beneficial and detrimental effects should guide further work on improving PSC stability via surface treatments.

Artificial Synapse Based on a δ-FAPbI3/Atomic-Layer-Deposited SnO2 Bilayer Memristor.

Halide perovskite-based resistive switching memory (memristor) has potential in an artificial synapse. However, an abrupt switch behavior observed for a formamidinium lead triiodide (FAPbI3)-based memristor is undesirable for an artificial synapse. Here, we report on the δ-FAPbI3/atomic-layer-deposited (ALD)-SnO2 bilayer memristor for gradual analogue resistive switching. In comparison to a single-layer δ-FAPbI3 memristor, the heterojunction δ-FAPbI3/ALD-SnO2 bilayer effectively reduces the current level in the high-resistance state. The analog resistive switching characteristics of δ-FAPbI3/ALD-SnO2 demonstrate exceptional linearity and potentiation/depression performance, resembling an artificial synapse for neuromorphic computing. The nonlinearity of long-term potentiation and long-term depression is notably decreased from 12.26 to 0.60 and from -8.79 to -3.47, respectively. Moreover, the δ-FAPbI3/ALD-SnO2 bilayer achieves a recognition rate of ≤94.04% based on the modified National Institute of Standards and Technology database (MNIST), establishing its potential in an efficient artificial synapse.

Facet-Dependent Passivation for Efficient Perovskite Solar Cells.

Understanding the interplay between the surface structure and the passivation materials and their effects associated with surface structure modification is of fundamental importance; however, it remains an unsolved problem in the perovskite passivation field. Here, we report a surface passivation principle for efficient perovskite solar cells via a facet-dependent passivation phenomenon. The passivation process selectively occurs on facets, which is observed with various post-treatment materials with different functionality, and the atomic arrangements of the facets determine the alignments of the passivation layers. The profound understanding of facet-dependent passivation leads to the finding of 2-amidinopyridine hydroiodide as the material for a uniform and effective passivation on both (100) and (111) facets. Consequently, we achieved perovskite solar cells with an efficiency of 25.10% and enhanced stability. The concept of facet-dependent passivation can provide an important clue on unidentified passivation principles for perovskite materials and a novel means to enhance the performance and stability of perovskite-based devices.

Suppressing ion migration in metal halide perovskite via interstitial doping with a trace amount of multivalent cations.

Cations with suitable sizes to occupy an interstitial site of perovskite crystals have been widely used to inhibit ion migration and promote the performance and stability of perovskite optoelectronics. However, such interstitial doping inevitably leads to lattice microstrain that impairs the long-range ordering and stability of the crystals, causing a sacrificial trade-off. Here, we unravel the evident influence of the valence states of the interstitial cations on their efficacy to suppress the ion migration. Incorporation of a trivalent neodymium cation (Nd3+) effectively mitigates the ion migration in the perovskite lattice with a reduced dosage (0.08%) compared to a widely used monovalent cation dopant (Na+, 0.45%). The photovoltaic performances and operational stability of the prototypical perovskite solar cells are enhanced with a trace amount of Nd3+ doping while minimizing the sacrificial trade-off.

Printable organometallic perovskite enables large-area, low-dose X-ray imaging.

Medical X-ray imaging procedures require digital flat detectors operating at low doses to reduce radiation health risks. Solution-processed organic-inorganic hybrid perovskites have characteristics that make them good candidates for the photoconductive layer of such sensitive detectors. However, such detectors have not yet been built on thin-film transistor arrays because it has been difficult to prepare thick perovskite films (more than a few hundred micrometres) over large areas (a detector is typically 50 centimetres by 50 centimetres). We report here an all-solution-based (in contrast to conventional vacuum processing) synthetic route to producing printable polycrystalline perovskites with sharply faceted large grains having morphologies and optoelectronic properties comparable to those of single crystals. High sensitivities of up to 11 microcoulombs per air KERMA of milligray per square centimetre (µC mGyair-1 cm-2) are achieved under irradiation with a 100-kilovolt bremsstrahlung source, which are at least one order of magnitude higher than the sensitivities achieved with currently used amorphous selenium or thallium-doped cesium iodide detectors. We demonstrate X-ray imaging in a conventional thin-film transistor substrate by embedding an 830-micrometre-thick perovskite film and an additional two interlayers of polymer/perovskite composites to provide conformal interfaces between perovskite films and electrodes that control dark currents and temporal charge carrier transportation. Such an all-solution-based perovskite detector could enable low-dose X-ray imaging, and could also be used in photoconductive devices for radiation imaging, sensing and energy harvesting.

High-Efficiency Perovskite Solar Cells.

With rapid progress in a power conversion efficiency (PCE) to reach 25%, metal halide perovskite-based solar cells became a game-changer in a photovoltaic performance race. Triggered by the development of the solid-state perovskite solar cell in 2012, intense follow-up research works on structure design, materials chemistry, process engineering, and device physics have contributed to the revolutionary evolution of the solid-state perovskite solar cell to be a strong candidate for a next-generation solar energy harvester. The high efficiency in combination with the low cost of materials and processes are the selling points of this cell over commercial silicon or other organic and inorganic solar cells. The characteristic features of perovskite materials may enable further advancement of the PCE beyond those afforded by the silicon solar cells, toward the Shockley-Queisser limit. This review summarizes the fundamentals behind the optoelectronic properties of perovskite materials, as well as the important approaches to fabricating high-efficiency perovskite solar cells. Furthermore, possible next-generation strategies for enhancing the PCE over the Shockley-Queisser limit are discussed.

Characterization of a C-Type Lectin Domain-Containing Protein with Antibacterial Activity from Pacific Abalone (Haliotis discus hannai).

Genes that influence the growth of Pacific abalone (Haliotis discus hannai) may improve the productivity of the aquaculture industry. Previous research demonstrated that the differential expression of a gene encoding a C-type lectin domain-containing protein (CTLD) was associated with a faster growth in Pacific abalone. We analyzed this gene and identified an open reading frame that consisted of 145 amino acids. The sequence showed a significant homology to other genes that encode CTLDs in the genus Haliotis. Expression profiling analysis at different developmental stages and from various tissues showed that the gene was first expressed at approximately 50 days after fertilization (shell length of 2.47 ± 0.13 mm). In adult Pacific abalone, the gene was strongly expressed in the epipodium, gill, and mantle. Recombinant Pacific abalone CTLD purified from Escherichia coli exhibited antimicrobial activity against several Gram-positive bacteria (Bacillus subtilis, Streptococcus iniae, and Lactococcus garvieae) and Gram-negative bacteria (Vibrio alginolyticus and Vibrio harveyi). We also performed bacterial agglutination assays in the presence of Ca2+, as well as bacterial binding assays in the presence of the detergent dodecyl maltoside. Incubation with E. coli and B. subtilis cells suggested that the CTLD stimulated Ca2+-dependent bacterial agglutination. Our results suggest that this novel Pacific abalone CTLD is important for the pathogen recognition in the gastropod host defense mechanism.

Strain Control to Stabilize Perovskite Solar Cells.

Perovskite solar cells (PSCs) are rivaling most commercial photovoltaics in the aspect of efficiency and cost, while their intrinsic instability remains a major concern for their practical deployment. The presence of undesirable strain in PSCs during device fabrication and operation refers to the extension/narrowing of chemical bonds and expansion/shrinkage of lattice volume, which largely affects device stability due to promoted phase transition, chemical decomposition, and mechanical fragility. Pioneering investigations and remarkable achievements have revealed that strain control is indispensable in the design of stable PSCs. Herein, the evolution of strain in perovskite thin films and its effect on device performance is elucidated, and state-of-the-art strategies of strain modulation are systematically reviewed. A thorough understanding and cautious control of the strain-related phenomenon pave the pathway to derive perovskite materials with desired properties.

Identification and characterization of SaRpAMP, a 60S ribosomal protein L27-derived antimicrobial peptide from amur catfish, Silurus asotus.

Aquatic freshwater fish like catfish, Silurus asotus, lives in microbe-rich environments, which enable this fish to develop necessary defense mechanisms. Antimicrobial peptides, along with other innate immune factors, are regarded as an important group in this defense. An antimicrobial peptide, which was isolated from the skin of S. asotus, was identified as a C-terminal fragment of 60S ribosomal protein L27 from S. asotus. The peptide was, then, designated Silurus asotus 60S ribosomal protein L27-derived antimicrobial peptide, SaRpAMP. Primary structure analyses and cDNA cloning revealed that SaRpAMP was 4185.36 Da and composed of 33 amino acids (AAs). Its precursor had a total of 136 AAs containing a pro-sequence of 103 AAs encoded by the nucleotide sequence of 512 bp that comprises a 5' untranslated region (UTR) of 32 bp, an open reading frame (ORF) of 411 bp, and a 3' UTR of 69 bp. Secondary structure analyses showed that SaRpAMP had two α-helices with turns and coils and an amphiphilic structure, a finding consistent with the 3D model of the peptide. SaRpAMP exhibited potent antibacterial activity comparable to piscidin 1, a powerful positive control. Its antimicrobial activity against fungus C. albicans was relatively weak. The antimicrobial activity of SaRpAMP was not diminished by heat treatment and changes in pH but was abolished by proteolytic enzyme digestion. Membrane permeability assays suggested that SaRpAMP interacts with both the outer and inner bacterial membranes. This was consistent with the results of lipid titration and quenching of Trp fluorescence that demonstrated SaRpAMP's interaction with acidic liposomes. Collectively, these findings suggest that the identified peptide, SaRpAMP, was the first antimicrobial peptide reported to be derived from the C-terminal region of 60S ribosomal protein L27. The findings also suggest that the action mechanism of SaRpAMP involved the interaction of the peptide with the bacterial membranes.

Roadmap on halide perovskite and related devices.

Since the first report on solid-state perovskite solar cells (PSCs) with ∼10% power conversion efficiency (PCE) and 500 h-stability in 2012, tremendous effort has been being devoted to develop PSCs with higher PCE, longer stability and recycling hazardous lead waste. As a result, PCE over 23% was recorded in 2018 and stability over 10 000 h was reported. Beyond photovoltaics, lead halide perovskite materials demonstrated superb properties when they were applied to flat-panel x-ray detectors and non-volatile resistive switching memory. In this review, the progress of the lead halide perovskite in photovoltaics, x-ray imaging and memristors is investigated. Pb-based PSCs and non-Pb-based PSCs are compared, where technologies of non-Pb-based PSCs are not matured for commercialization. Pb-based PSCs were found to be highly suitable for both terrestrial and space photovoltaics. Higher sensitivity under low dose rate observed from the lead halide perovskite suggests a bright future for perovskite x-ray imaging systems. Moreover, high on/off ratio and low energy consumption observed in resistive switching enables perovskite to be a promising candidate for high density memristors.

Elongated Lifetime and Enhanced Flux of Hot Electrons on a Perovskite Plasmonic Nanodiode.

A fundamental understanding of hot electron transport is critical for developing efficient hot-carrier-based solar cells. There have been significant efforts to enhance hot electron flux, and it has been found that a key factor affecting the hot electron flux is the lifetime of the hot electrons. Here, we report a combined study of hot electron flux and the lifetime of hot carriers using a perovskite-modified plasmonic nanodiode. We found that perovskite deposition on a plasmonic nanodiode can considerably improve hot electron generation induced by photon absorption. The perovskite plasmonic nanodiode consists of MAPbI3 layers covering a plasmonic-Au/TiO2 Schottky junction that is composed of randomly connected Au nanoislands deposited on a TiO2 layer. The measured incident photon-to-electron conversion efficiency and the short-circuit photocurrent show a significantly improved solar-to-electrical conversion performance of this nanodiode. Such an improvement is ascribed to the improved hot electron flux in MAPbI3 caused by effective light absorption from near-field enhancement of plasmonic Au and the efficient capture of hot electrons from Au nanoislands via the formation of a three-dimensional Schottky interface. The relation between the lifetime and flux of hot electrons was confirmed by femtosecond transient absorption spectroscopy that showed considerably longer hot electron lifetimes in MAPbI3 combined with the plasmonic Au structure. These findings can provide a fundamental understanding of hot electron generation and transport in perovskite, which can provide helpful guidance to designing efficient hot carrier photovoltaics.

Biochemical and molecular identification of a novel hepcidin type 2-like antimicrobial peptide in the skin mucus of the pufferfish Takifugu pardalis.

Fish skin mucus is considered to act as the first line of defense against waterborne pathogens and to be potential source of novel antimicrobial components. Here we report the purification and characterization of a novel hepcidin type 2-like antimicrobial peptide (TpHAMP2) from the skin mucus of the pufferfish Takifugu pardalis. The purified TpHAMP2 comprised of 23 amino acids (AAs) with eight Cys residues that form four intramolecular disulfide bonds. The TpHAMP2 gene shared overall structural characteristics with all known hepcidins, which have a tripartite exon-intron gene organization and three structural signatures in the precursor protein. Phylogenetically, TpHAMP2 was classified as HAMP2 class in acanthopterygian fish. Interestingly, the AA sequence of TpHAMP2 did not contain a proprotein cleavage site (RXXR motif) that conserved in most hepcidins and showed a highly positive charged (RKR-) short N-terminus and Val18 and Gly22 residues, which are distinctive structures compared to other known active hepcidins. Recombinant TpHAMP2 identical to the native form exhibited a broad spectrum and potent antimicrobial activity against tested gram-positive and -negative bacteria. Expression of TpHAMP2 mRNA was predominant in the liver and was upregulated in the liver, the spleen, the intestine, and the skin of T. pardalis post immune challenge. Thus, our findings suggests that TpHAMP2 might be of importance in the framework of discovering the fish hepcidins, especially type 2s, and provide noteworthy insight into its gene structure and expression and in the innate immunity as well as the mucosal immunity in regard to hepcidins' evolutionary history in fish species.

Anti-Inflammatory Activity of ß-thymosin Peptide Derived from Pacific Oyster (Crassostrea gigas) on NO and PGE2 Production by Down-Regulating NF-κB in LPS-Induced RAW264.7 Macrophage Cells.

ß-thymosin is known for having 43 amino acids, being water-soluble, having a light molecular weight and ubiquitous polypeptide. The biological activities of ß-thymosin are diverse and include the promotion of wound healing, reduction of inflammation, differentiation of T cells and inhibition of apoptosis. Our previous studies showed that oyster ß-thymosin originated from the mantle of the Pacific oyster, Crassostrea gigas and had antimicrobial activity. In this study, we investigated the anti-inflammatory effects of oyster ß-thymosin in lipopolysaccharide (LPS)-induced RAW264.7 macrophage cells using human ß-thymosin as a control. Oyster ß-thymosin inhibited the nitric oxide (NO) production as much as human ß-thymosin in LPS-induced RAW264.7 cells. It also showed that oyster ß-thymosin suppressed the expression of prostaglandin E2 (PGE2), inducible nitric oxide synthase (iNOS) and cyclooxygenase-2 (COX-2). Moreover, oyster ß-thymosin reduced inflammatory cytokines such as tumor necrosis factor-α (TNF-α), interleukin-1ß (IL-1ß) and interleukin-6 (IL-6). Oyster ß-thymosin also suppressed the nuclear translocation of phosphorylated nuclear factor-κB (NF-κB) and degradation of inhibitory κB (IκB) in LPS-induced RAW264.7 cells. These results suggest that oyster ß-thymosin, which is derived from the mantle of the Pacific oyster, has as much anti-inflammatory effects as human ß-thymosin. Additionally, oyster ß-thymosin suppressed NO production, PGE2 production and inflammatory cytokines expression via NF-κB in LPS-induced RAW264.7 cells.

Universal Approach toward Hysteresis-Free Perovskite Solar Cell via Defect Engineering.

Organic-inorganic halide perovskite is believed to be a potential candidate for high efficiency solar cells because power conversion efficiency (PCE) was certified to be more than 22%. Nevertheless, mismatch of PCE due to current density (J)-voltage (V) hysteresis in perovskite solar cells is an obstacle to overcome. There has been much lively debate on the origin of J-V hysteresis; however, effective methodology to solve the hysteric problem has not been developed. Here we report a universal approach for hysteresis-free perovskite solar cells via defect engineering. A severe hysteresis observed from the normal mesoscopic structure employing TiO2 and spiro-MeOTAD is almost removed or does not exist upon doping the pure perovskites, CH3NH3PbI3 and HC(NH2)2PbI3, and the mixed cation/anion perovskites, FA0.85MA0.15PbI2.55Br0.45 and FA0.85MA0.1Cs0.05PbI2.7Br0.3, with potassium iodide. Substantial reductions in low-frequency capacitance and bulk trap density are measured from the KI-doped perovskite, which is indicative of trap-hysteresis correlation. A series of experiments with alkali metal iodides of LiI, NaI, KI, RbI and CsI reveals that potassium ion is the right element for hysteresis-free perovskite. Theoretical studies suggest that the atomistic origin of the hysteresis of perovskite solar cells is not the migration of iodide vacancy but results from the formation of iodide Frenkel defect. Potassium ion is able to prevent the formation of Frenkel defect since K+ energetically prefers the interstitial site. A complete removal of hysteresis is more pronounced at mixed perovskite system as compared to pure perovskites, which is explained by lower formation energy of K interstitial (-0.65 V for CH3NH3PbI3 vs -1.17 V for mixed perovskite). The developed KI doping methodology is universally adapted for hysteresis-free perovskite regardless of perovskite composition and device structure.

Methodologies toward Highly Efficient Perovskite Solar Cells.

A perovskite solar cell (PSC) employing an organic-inorganic lead halide perovskite light harvester, seeded in 2009 with power conversion efficiency (PCE) of 3.8% and grown in 2011 with PCE of 6.5% in dye-sensitized solar cell structure, has received great attention since the breakthrough reports ≈10% efficient solid-state PCSs demonstrating 500 h stability. Developments of device layout and high-quality perovskite film eventually lead to a PCE over 22%. As of October 31, 2017, the highest PCE of 22.7% is listed in an efficiency chart provided by NREL. In this Review, the methodologies to obtain highly efficient PSCs are described in detail. In order to achieve a PCE of over 20% reproducibly, key technologies are disclosed from the viewpoint of precursor solution chemistry, processing for defect-free perovskite films, and passivation of grain boundaries. Understanding chemical species in precursor solution, crystal growth kinetics, light-matter interaction, and controlling defects is expected to give important insights into not only reproducible production of high PCE over 20% but also further enhancement of the PCE of PCSs.

Isolation of an invertebrate-type lysozyme from the nephridia of the echiura, Urechis unicinctus, and its recombinant production and activities.

Invertebrates, unlike vertebrates which have adaptive immune system, rely heavily on the innate immune system for the defense against pathogenic bacteria. Lysozymes, along with other immune effectors, are regarded as an important group in this defense. An invertebrate-type (i-type) lysozyme, designated Urechis unicinctus invertebrate-type lysozyme, Uu-ilys, has been isolated from nephridia of Urechis unicinctus using a series of high performance liquid chromatography (HPLC), and ultrasensitive radial diffusion assay (URDA) as a bioassay system. Analyses of the primary structure and cDNA cloning revealed that Uu-ilys was approximately 14 kDa and composed of 122 amino acids (AAs) of which the precursor had a total of 160 AAs containing a signal peptide of 18 AAs and a pro-sequence of 20 AAs encoded by the nucleotide sequence of 714 bp that comprises a 5' untranslated region (UTR) of 42 bp, an open reading frame (ORF) of 483 bp, and a 3' UTR of 189 bp. Multiple sequence alignment showed Uu-ilys has high homology to i-type lysozymes from several annelids. Relatively high transcriptional expression levels of Uu-ilys was detected in nephridia, anal vesicle, and intestine. The native Uu-ilys exhibited comparable lysozyme enzymatic and antibacterial activities to hen egg white lysozyme. Collectively, these data suggest that Uu-ilys, the isolated antibacterial protein, plays a role in the immune defense mechanism of U. unicinctus. Recombinant Uu-ilys (rUu-ilys) produced in a bacterial expression system showed significantly decreased lysozyme lytic activity from that of the native while its potency on radial diffusion assay detecting antibacterial activity was retained, which may indicate the non-enzymatic antibacterial capacity of Uu-ilys.

The Interplay between Trap Density and Hysteresis in Planar Heterojunction Perovskite Solar Cells.

Anomalous current-voltage (J-V) hysteresis in perovskite (PSK) solar cell is open to dispute, where hysteresis is argued to be due to electrode polarization, dipolar polarization, and/or native defects. However, a correlation between those factors and J-V hysteresis is hard to be directly evaluated because they usually coexist and are significantly varied depending on morphology and crystallinity of the PSK layer, selective contacts, and device architecture. In this study, without changing morphology and crystallinity of PSK layer in a planar heterojunction structure employing FA0.9Cs0.1PbI3, a correlation between J-V hysteresis and trap density is directly evaluated by means of thermally induced PbI2 regulating trap density. Increase in thermal annealing time at a given temperature of 150 °C induces growth of PbI2 on the PSK grain surface, which results in significant reduction of nonradiative recombination. Hysteresis index is reduced from 0.384 to 0.146 as the annealing time is increased from 5 to 100 min due to decrease in the amplitude of trap-mediated recombination. Reduction of hysteresis by minimizing trap density via controlling thermal annealing time leads to the stabilized PCE of 18.84% from the normal planar structured FA0.9Cs0.1PbI3 PSK solar cell.