Spatially Decoupled H2O2 Activation Pathways and Multi-Enzyme Activities in Rod-Shaped CeO2 with Implications for Facet Distribution.

CeO2, particularly in the shape of rod, has recently gained considerable attention for its ability to mimic peroxidase (POD) and haloperoxidase (HPO). However, this multi-enzyme activities unavoidably compete for H2O2 affecting its performance in relevant applications. The lack of consensus on facet distribution in rod-shaped CeO2 further complicates the establishment of structure-activity correlations, presenting challenges for progress in the field. In this study, the HPO-like activity of rod-shaped CeO2 is successfully enhanced while maintaining its POD-like activity through a facile post-calcination method. By studying the spatial distribution of these two activities and their exclusive H2O2 activation pathways on CeO2 surfaces, this study finds that the increased HPO-like activity originated from the newly exposed (111) surface at the tip of the shortened rods after calcination, while the unchanged POD-like activity is attributed to the retained (110) surface in their lateral area. These findings not only address facet distribution discrepancies commonly reported in the literature for rod-shaped CeO2 but also offer a simple approach to enhance its antibacterial performance. This work is expected to provide atomic insights into catalytic correlations and guide the design of nanozymes with improved activity and reaction specificity.

Plasmonic Cross-Linking Colorimetric PCR for Simple and Sensitive Nucleic Acid Detection.

Simple, low-cost, and accurate nucleic acid assay platforms hold great promise for point-of-care (POC) pathogen detection, disease surveillance, and control. Plasmonic photothermal polymerase chain reaction (PPT-PCR) is a powerful and efficient nucleic acid amplification technique, but it lacks a simple and convenient analysis method for POC applications. Herein, we propose a novel plasmonic cross-linking colorimetric PCR (PPT-ccPCR) assay by integrating plasmonic magnetic nanoparticle (PMN)-based PPT-PCR with gold nanoparticle (AuNP)-based cross-linking colorimetry. AuNPs form assembled structures with the PMNs in the presence of amplicons and collect in a magnetic field, resulting in color changes to the supernatant. Target DNA with concentrations as low as 5 copies/µL can be visually detected within 40 min. The achieved limit of detection was 1.8 copies/µL based on the absorption signals. This simple and sensitive strategy needs no expensive instrumentation and demonstrates high potential for POC detection while enabling further applications in clinical diagnostics.

Cu-Co Dual-Atom Catalysts Supported on Hierarchical USY Zeolites for an Efficient Cross-Dehydrogenative C(sp2)-N Coupling Reaction.

A cross-coupling reaction via the dehydrogenative route over heterogeneous solid atomic catalysts offers practical solutions toward an economical and sustainable elaboration of simple organic substrates. The current utilization of this technology is, however, hampered by limited molecular definition of many solid catalysts. Here, we report the development of Cu-M dual-atom catalysts (where M = Co, Ni, Cu, and Zn) supported on a hierarchical USY zeolite to mediate efficient dehydrogenative cross-coupling of unprotected phenols with amine partners. Over 80% isolated yields have been attained over Cu-Co-USY, which shows much superior reactivity when compared with our Cu1 and other Cu-M analogues. This amination reaction has hence involved simple and non-forceful reaction condition requirements. The superior reactivity can be attributed to (1) the specifically designed bimetallic Cu-Co active sites within the micropore for "co-adsorption-co-activation" of the reaction substrates and (2) the facile intracrystalline (meso/micropore) diffusion of the heterocyclic organic substrates. This study offers critical insights into the engineering of next-generation solid atomic catalysts with complex reaction steps.

Cluster Nanozymes with Optimized Reactivity and Utilization of Active Sites for Effective Peroxidase (and Oxidase) Mimicking.

Single-atom catalysts have attracted attention in the past decade since they maximize the utilization of active sites and facilitate the understanding of product distribution in some catalytic reactions. Recently, this idea has been extended to single-atom nanozymes (SAzymes) for the mimicking of natural enzymes such as horseradish peroxidase (HRP) often used in bioanalytical applications. Herein, it is demonstrated that those SAzymes without constructing the reaction pocket of HRP still undergo the OH radical-mediated pathway like most of the reported nanozymes. Their positively charged single-atom centers resulting from support electronegative oxygen/nitrogen hinder the reductive conversion of H2 O2 to OH radicals and hence display low activity per site. In contrast, it is found that this step can be facilitated over their metallic counterparts on cluster nanozymes with much higher site activity and atom efficiency (cf. SAzymes with 100% atom utilization). Besides the mimicking of HRP in glucose detection, cluster nanozymes are also demonstrated as a better oxidase mimetic for glutathione detection.

Surface Fingerprinting of Faceted Metal Oxides and Porous Zeolite Catalysts by Probe-Assisted Solid-State NMR Approaches.

Acid catalysis in heterogeneous systems such as metal oxides and porous zeolites has been widely involved in various catalytic processes for chemical and petrochemical industries. In acid-catalyzed reactions, the performance (e.g., activity and selectivity) is closely associated with the acidic features of the catalysts, viz., type (Lewis vs Brønsted acidity), distribution (external vs internal surface), strength (strong vs weak), concentration (amount), and spatial interactions of acidic sites. The characterization of local structure and acidic properties of these active sites has important implications for understanding the reaction mechanism and the practical catalytic applications of acidic catalysts. Among diverse acidity characterization approaches, the solid-state nuclear magnetic resonance (SSNMR) technique with suitable probe molecules has been recognized as a reliable and versatile tool. Such a probe-assisted SSNMR approach could provide qualitative (type, distribution, and spatial interactions) and quantitative (strength and concentration) information on each acidic site. This Account aims to integrate our recent important findings in determining the structures and acidic characteristics of some typical metal oxide and zeolite catalysts by using the probe-assisted SSNMR technique, as well as clarifying the continuously evolving process of each discrete acidic site under hydrothermal or chemical treatments even at the molecular level with multiscale theoretical simulations.More specifically, we will describe herein the development and applications of the probe-assisted SSNMR methods, such as trimethylphosphine (TMP) and acetonitrile-d3 (CD3CN) in conjunction with advanced two-dimensional (2D) homo- and heteronuclear correlation spectroscopy, for characterizing the structures and properties of acidic sites in varied solid catalysts. Moreover, relevant information regarding the surface fingerprinting of various facets on crystalline metal oxide nanoparticles and active centers inside porous zeolites, the mapping of relevant spatial interactions, and the verification of structure-activity correlation were investigated as well. Relevant discussions are mainly based on the recent NMR experiments of our collaborating research groups, including (i) determining the acidic characterization with probe-assisted SSNMR approaches, (ii) mapping various active centers (or crystalline facets), and (iii) revealing their influence on catalytic performance of solid acid catalyst systems. It is anticipated that this information may provide more in-depth insights toward our fundamental understanding of solid acid catalysis.

Rapid Interchangeable Hydrogen, Hydride, and Proton Species at the Interface of Transition Metal Atom on Oxide Surface.

Hydrogen spillover is the phenomenon where a hydrogen atom, generated from the dissociative chemisorption of dihydrogen on the surface of a metal species, migrates from the metal to the catalytic support. This phenomenon is regarded as a promising avenue for hydrogen storage, yet the atomic mechanism for how the hydrogen atom can be transferred to the support has remained controversial for decades. As a result, the development of catalytic support for such a purpose is only limited to typical reducible oxide materials. Herein, by using a combination of in situ spectroscopic and imaging technique, we are able to visualize and observe the atomic pathway for which hydrogen travels via a frustrated Lewis pair that has been constructed on a nonreducible metal oxide. The interchangeable status between the hydrogen, proton, and hydride is carefully characterized and demonstrated. It is envisaged that this study has opened up new design criteria for hydrogen storage material.

Electronic-State Manipulation of Surface Titanium Activates Dephosphorylation Over TiO2 Near Room Temperature.

Dephosphorylation that removes a phosphate group from substrates is an important reaction for living organisms and environmental protection. Although CeO2 has been shown to catalyze this reaction, cerium is low in natural abundance and has a narrow global distribution (>90 % of these reserves are located within six countries). It is thus imperative to find another element/material with high worldwide abundance that can also efficiently extract the phosphate out of agricultural waste for phosphorus recycle. Using para-nitrophenyl phosphate (p-NPP) as a model compound, we demonstrate that TiO2 with a F-modified (001) surface can activate p-NPP dephosphorylation at temperatures as low as 40 °C. By probe-assisted nuclear magnetic resonance (NMR), it was revealed that the strong electron-withdrawing effect of fluorine makes Ti atoms (the active sites) on the (001) surface very acidic. The bidentate adsorption of p-NPP on this surface further promotes its subsequent activation with a barrier ≈20 kJ mol-1 lower than that of the pristine (001) and (101) surfaces, allowing the activation of this reaction near room temperature (from >80 °C).

Nanoisozymes: The Origin behind Pristine CeO2 as Enzyme Mimetics.

It is known that the interplay between molecules and active sites on the topmost surface of a solid catalyst determines its activity in heterogeneous catalysis. The electron density of the active site is believed to affect both adsorption and activation of reactant molecules at the surface. Unfortunately, commercial X-ray photoelectron spectroscopy, which is often adopted for such characterization, is not sensitive enough to analyze the topmost surface of a catalyst. Most researchers fail to acknowledge this point during their catalytic correlation, leading to different interpretations in the literature in recent decades. Recent studies on pristine Cu2 O [Nat. Catal. 2019, 2, 889; Nat. Energy 2019, 4, 957] have clearly suggested that the electron density of surface Cu is facet dependent and plays a key role in CO2 reduction. Herein, it is shown that pristine CeO2 can reach 2506/1133 % increase in phosphatase-/peroxidase-like activity if the exposed surface is wisely selected. By using NMR spectroscopy with a surface probe, the electron density of the surface Ce (i.e., the active site) is found to be facet dependent and the key factor dictating their enzyme-mimicking activities. Most importantly, the surface area of the CeO2 morphologies is demonstrated to become a factor only if surface Ce can activate the adsorbed reactant molecules.

Engineered core-shell magnetic nanoparticle for MR dual-modal tracking and safe magnetic manipulation of ependymal cells in live rodents.

Tagging recognition group(s) on superparamagnetic iron oxide is known to aid localisation (imaging), stimulation and separation of biological entities using magnetic resonance imaging (MRI) and magnetic agitation/separation (MAS) techniques. Despite the wide applicability of iron oxide nanoparticles in T 2-weighted MRI and MAS, the quality of the images and safe manipulation of the exceptionally delicate neural cells in a live brain are currently the key challenges. Here, we demonstrate the engineered manganese oxide clusters-iron oxide core-shell nanoparticle as an MR dual-modal contrast agent for neural stem cells (NSCs) imaging and magnetic manipulation in live rodents. As a result, using this engineered nanoparticle and associated technologies, identification, stimulation and transportation of labelled potentially multipotent NSCs from a specific location of a live brain to another by magnetic means for self-healing therapy can therefore be made possible.

Structural Studies of Bulk to Nanosize Niobium Oxides with Correlation to Their Acidity.

Hydrated niobium oxides are used as strong solid acids with a wide variety of catalytic applications, yet the correlations between structure and acidity remain unclear. New insights into the structural features giving rise to Lewis and Brønsted acid sites are presently achieved. It appears that Lewis acid sites can arise from lower coordinate NbO5 and in some cases NbO4 sites, which are due to the formation of oxygen vacancies in thin and flexible NbO6 systems. Such structural flexibility of Nb-O systems is particularly pronounced in high surface area nanostructured materials, including few-layer to monolayer or mesoporous Nb2O5·nH2O synthesized in the presence of stabilizers. Bulk materials on the other hand only possess a few acid sites due to lower surface areas and structural rigidity: small numbers of Brønsted acid sites on HNb3O8 arise from a protonic structure due to the water content, whereas no acid sites are detected for anhydrous crystalline H-Nb2O5.

Trimethylphosphine-Assisted Surface Fingerprinting of Metal Oxide Nanoparticle by (31)P Solid-State NMR: A Zinc Oxide Case Study.

Nano metal oxides are becoming widely used in industrial, commercial and personal products (semiconductors, optics, solar cells, catalysts, paints, cosmetics, sun-cream lotions, etc.). However, the relationship of surface features (exposed planes, defects and chemical functionalities) with physiochemical properties is not well studied primarily due to lack of a simple technique for their characterization. In this study, solid state (31)P MAS NMR is used to map surfaces on various ZnO samples with the assistance of trimethylphosphine (TMP) as a chemical probe. As similar to XRD giving structural information on a crystal, it is demonstrated that this new surface-fingerprint technique not only provides qualitative (chemical shift) but also quantitative (peak intensity) information on the concentration and distribution of cations and anions, oxygen vacancies and hydroxyl groups on various facets from a single deconvoluted (31)P NMR spectrum. On the basis of this technique, a new mechanism for photocatalytic •OH radical generation from direct surface-OH oxidation is revealed, which has important implications regarding the safety of using nano oxides in personal care products.

One-step, room-temperature synthesis of glutathione-capped iron-oxide nanoparticles and their application in in vivo T1-weighted magnetic resonance imaging.

The room-temperature, aqueous-phase synthesis of iron-oxide nanoparticles (IO NPs) with glutathione (GSH) is reported. The simple, one-step reduction involves GSH as a capping agent and tetrakis(hydroxymethyl)phosphonium chloride (THPC) as the reducing agent; GSH is an anti-oxidant that is abundant in the human body while THPC is commonly used in the synthesis of noble-metal clusters. Due to their low magnetization and good water-dispersibility, the resulting GSH-IO NPs, which are 3.72 ± 0.12 nm in diameter, exhibit a low r2 relaxivity (8.28 mm(-1) s(-1)) and r2/r1 ratio (2.28)--both of which are critical for T1 contrast agents. This, together with the excellent biocompatibility, makes these NPs an ideal candidate to be a T1 contrast agent. Its capability in cellular imaging is illustrated by the high signal intensity in the T1-weighted magnetic resonance imaging (MRI) of treated HeLa cells. Surprisingly, the GSH-IO NPs escape ingestion by the hepatic reticuloendothelial system, enabling strong vascular enhancement at the internal carotid artery and superior sagittal sinus, where detection of the thrombus is critical for diagnosing a stroke. Moreover, serial T1- and T2-weighted time-dependent MR images are resolved for a rat's kidneys, unveiling detailed cortical-medullary anatomy and renal physiological functions. The newly developed GSH-IO NPs thus open a new dimension in efforts towards high-performance, long-circulating MRI contrast agents that have biotargeting potential.

Reduction of Li+ within a borate anion.

Group 1 elements exhibit the lowest electronegativity values in the Periodic Table. The chemical reduction of Group 1 metal cations M+ to M(0) is extremely challenging. Common tetraaryl borates demonstrate limited redox properties and are prone to decomposition upon oxidation. In this study, by employing simple yet versatile bipyridines as ligands, we synthesized a series of redox-active borate anions characterized by NMR and X-ray single-crystal diffraction. Notably, the borate anion can realize the reduction of Li+, generating elemental lithium metal and boron radical, thereby demonstrating its potent reducing ability. Furthermore, it can serve as a powerful two-electron-reducing reagent and be readily applied in various reductive homo-coupling reactions and Birch reduction of acridine. Additionally, this borate anion demonstrates its catalytic ability in the selective two-electron reduction of CO2 into CO.

Advances in Microfluidic Paper-Based Analytical Devices (µPADs): Design, Fabrication, and Applications.

Microfluidic Paper-based Analytical Devices (µPADs) have emerged as a new class of microfluidic systems, offering numerous advantages over traditional microfluidic chips. These advantages include simplicity, cost-effectiveness, stability, storability, disposability, and portability. As a result, various designs for different types of assays are developed and investigated. In recent years, µPADs are combined with conventional detection methods to enable rapid on-site detection, providing results comparable to expensive and sophisticated large-scale testing methods that require more time and skilled personnel. The application of µPAD techniques is extensive in environmental quality control/analysis, clinical diagnosis, and food safety testing, paving the way for on-site real-time diagnosis as a promising future development. This review focuses on the recent research advancements in the design, fabrication, material selection, and detection methods of µPADs. It provides a comprehensive understanding of their principles of operation, applications, and future development prospects.

Applying thallium isotopic compositions as novel and sensitive proxy for Tl(I)/Tl(III) transformation and source apportionment.

Thallium is a rare metal known for its highly toxic nature. Recent research has indicated that the precise determination of Tl isotopic compositions using Multi-Collector Inductively Coupled Plasma Mass Spectrometry (MC-ICP MS) provides new opportunities for understanding Tl geochemical behavior. While isotopic fractionation of Tl derived from anthropogenic activities (e.g., mining, smelting) have been reported, there is limited information regarding Tl influenced by both natural weathering processes and anthropogenic origins. Herein, we investigated, for the first time, the Tl isotopic compositions in soils across a representative Tl-rich depth profile from the Lanmuchang (LMC) quicksilver mine (southwest China) in the low-temperature metallogenesis zone. The results showed significant variations in Tl isotope signatures (ε205Tl) among different soil layers, ranging from -0.23 to 3.79, with heavier isotope-205Tl enrichment observed in the bottom layers of the profile (ε205Tl = 2.18-3.79). This enrichment of 205Tl was not solely correlated with the degree of soil weathering but was also partially associated with oxidation of Tl(I) by Fe (hydr)oxide minerals. Quantitative calculation using ε205Tl vs. 1/Tl data further indicated that the Tl enrichment across the soil depth profile was predominantly derived from anthropogenic origins. All these findings highlight that the robustness and reliability of Tl isotopes as a proxy for identifying both anthropogenic and geogenic sources, as well as tracing chemical alterations and redox-controlled mineralogical processes of Tl in soils. The nascent application of Tl isotopes herein not only offers valuable insights into the behavior of Tl in surface environments, but also establishes a framework for source apportionment in soils under similar circumstances.

Antiferromagnetic iron nanocolloids: a new generation in vivo T1 MRI contrast agent.

A novel T1 agent, antiferromagnetic α-iron oxide-hydroxide (α-FeOOH) nanocolloids with a diameter of 2-3 nm, has been successfully prepared. These nanocolloids, together with a post synthetic strategy performed in mesoporous silica, are a great improvement over the low T1-weighted contrast common in traditional magnetic silica nanocomposites. The intrinsic antiferromagnetic goethite (α-FeOOH) shows very low magnetization (M(z)) of 0.05 emu g(-1) at H = 2 T at 300 K (0.0006 emu g(-1) for FeOOH/WMSN-PEG), which is 2 orders of magnitude smaller than any current ultrasmall iron oxide NPs (>5 emu g(-1)) reported to date, hence ensuring the low r2 (∝ Mz) (7.64 mM(-1) s(-1)) and r2/r1 ratio (2.03) at 4.7 T. These biodegradable α-FeOOH nanocolloids also demonstrate excellent in vitro cellular imaging and in vivo MR vascular and urinary trace imaging capability with outstanding biocompatibility, which is exceptionally well secreted by the kidney and not the liver as with most nanoparticles, opening up a new avenue for designing powerful antiferromagnetic iron T1 contrast agents.

Removing Perfluoro Pollutants PFOA and PFOS by Two-Pronged Design of a Ni8-Pyrazolate Porous Framework.

Inspired by the practical need to remove persistent perfluoro pollutants from the environment, we leverage cutting-edge crystal engineering approaches. For this, we set our eyes on a recent porous coordination framework system based on the Ni8-oxo cluster and pyrazolate linkers as it is known for its stability to bases and other harsh environmental conditions. Our designer linker molecule here features (1) pyrazole donors masked by t-butyloxycarbonyl and (2) ethynyl side units protected by triisopropylsilyl groups. The former solvothermally demasks to assemble the Ni8-pyrazolate framework, in which the triisopropylsilyl groups can be post-synthetically cleaved by guest fluoride ions to unveil the terminal alkyne group (-CCH). The ethynyl groups of the framework solid offer versatile reactions for functionalization, as with perfluorophenyl azide (via a click reaction) to afford the two prongs of the 1,2,3-triazole base unit and the perfluoro unit. Together, these two functions make for an effective adsorbent for the topical acid pollutants of perfluorooctanoic acid and perfluorooctanesulfonic acid, with a high apparent rate constant (kobs) of 0.99 g mg-1 h-1 and large maximum uptake capacity (qmax) of 268.5 mg g-1 for perfluorooctanoic acid and kobs of 0.77 g mg-1 h-1 and qmax of 142.1 mg g-1 for perfluorooctanesulfonic acid.

Regulating the H2O2 Activation Pathway on a Well-Defined CeO2 Nanozyme Allows the Entire Steering of Its Specificity between Associated Enzymatic Reactions.

Nanozymes are promising alternatives to natural enzymes, but their use remains limited owing to poor specificity. For example, CeO2 activates H2O2 and displays peroxidase (POD)-like, catalase (CAT)-like, and haloperoxidase (HPO)-like activities. Since they unavoidably compete for H2O2, affecting its utilization in the target application, the precise manipulation of reaction specificity is thus imperative. Herein, we showed that one can simply achieve this by manipulating the H2O2 activation pathway on pristine CeO2 in well-defined shapes. This is because the coordination and electronic structures of Ce sites vary with CeO2 surfaces, wherein the (100) and (111) surfaces display nearly 100% specificity toward POD-/CAT-like and HPO-like activities, respectively. The antibacterial results suggest that the latter surface can well-utilize H2O2 to kill bacteria (cf., the former), which is promising for anti-biofouling applications. This work provides atomic insights into the synthesis of nanozymes with improved activity, reaction specificity, and H2O2 utilization.

Polynitrosoarene Radical as an Efficient Cathode Material for Lithium-Ion Batteries.

Organic radical batteries (ORBs) with radical-branched polymers as cathode materials represent a valuable alternative to meet the continuously increasing demand on energy storage. However, the low theoretical capacities of current radical-contained compounds strongly hamper their practical applications. To address this issue, a chemically robust polynitrosoarene (tris(4-nitrosophenyl)amine) with a pronounced radical property is rationally designed as an efficient cathode for ORBs. Its unique multi-nitroso structure displays remarkably reversible charge/discharge capability and a superior capacity up to 300 mA h g-1 (93% theoretical capacity) after 100 cycles at 100 mA g-1 within a broad potential window of 1.3-4.3 V (vs Li+/Li). Moreover, the ultra-long cycle life is also achieved at 1000 mA g-1 with 85% preservation of the capacity after 1000 cycles, making it the best-reported organic radical cathode material for lithium-ion batteries.

A Dye-Assisted Paper-Based Assay to Rapidly Differentiate the Stress of Chlorophenols and Heavy Metals on Enterococcus faecalis and Escherichia coli.

Biological toxicity testing plays an essential role in identifying the possible negative effects induced by substances such as organic pollutants or heavy metals. As an alternative to conventional methods of toxicity detection, paper-based analytical device (PAD) offers advantages in terms of convenience, quick results, environmental friendliness, and cost-effectiveness. However, detecting the toxicity of both organic pollutants and heavy metals is challenging for a PAD. Here, we show the evaluation of biotoxicity testing for chlorophenols (pentachlorophenol, 2,4-dichlorophenol, and 4-chlorophenol) and heavy metals (Cu2+, Zn2+, and Pb2+) by a resazurin-integrated PAD. The results were achieved by observing the colourimetric response of bacteria (Enterococcus faecalis and Escherichia coli) to resazurin reduction on the PAD. The toxicity responses of E. faecalis-PAD and E. coli-PAD to chlorophenols and heavy metals can be read within 10 min and 40 min, respectively. Compared to the traditional growth inhibition experiments for toxicity measuring which takes at least 3 h, the resazurin-integrated PAD can recognize toxicity differences between studied chlorophenols and between studied heavy metals within 40 min.