Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 9 de 9
Filtrar
Mais filtros

Base de dados
Tipo de documento
Intervalo de ano de publicação
1.
Phys Rev Lett ; 108(12): 122002, 2012 Mar 23.
Artigo em Inglês | MEDLINE | ID: mdl-22540573

RESUMO

The parity-violating (PV) asymmetry of inclusive π- production in electron scattering from a liquid deuterium target was measured at backward angles. The measurement was conducted as a part of the G0 experiment, at a beam energy of 360 MeV. The physics process dominating pion production for these kinematics is quasifree photoproduction off the neutron via the Δ0 resonance. In the context of heavy-baryon chiral perturbation theory, this asymmetry is related to a low-energy constant d(Δ)- that characterizes the parity-violating γNΔ coupling. Zhu et al. calculated d(Δ)- in a model benchmarked by the large asymmetries seen in hyperon weak radiative decays, and predicted potentially large asymmetries for this process, ranging from A(γ)-=-5.2 to +5.2 ppm. The measurement performed in this work leads to A(γ)-=-0.36±1.06±0.37±0.03 ppm (where sources of statistical, systematic and theoretical uncertainties are included), which would disfavor enchancements considered by Zhu et al. proportional to V(ud)/V(us). The measurement is part of a program of inelastic scattering measurements that were conducted by the G0 experiment, seeking to determine the N-Δ axial transition form factors using PV electron scattering.

2.
Rev Sci Instrum ; 93(7): 073303, 2022 Jul 01.
Artigo em Inglês | MEDLINE | ID: mdl-35922315

RESUMO

The 300 kV DC high voltage photogun at Jefferson Lab was redesigned to deliver electron beams with a much higher bunch charge and improved beam properties. The original design provided only a modest longitudinal electric field (Ez) at the photocathode, which limited the achievable extracted bunch charge. To reach the bunch charge goal of approximately few nC with 75 ps full-width at half-maximum Gaussian laser pulse width, the existing DC high voltage photogun electrodes and anode-cathode gap were modified to increase Ez at the photocathode. In addition, the anode aperture was spatially shifted with respect to the beamline longitudinal axis to minimize the beam deflection introduced by the non-symmetric nature of the inverted insulator photogun design. We present the electrostatic design of the original photogun and the modified photogun and beam dynamics simulations that predict vastly improved performance. We also quantify the impact of the photocathode recess on beam quality, where recess describes the actual location of the photocathode inside the photogun cathode electrode relative to the intended location. A photocathode unintentionally recessed/misplaced by sub-millimeter distance can significantly impact the downstream beam size.

3.
Phys Rev Lett ; 107(2): 022501, 2011 Jul 08.
Artigo em Inglês | MEDLINE | ID: mdl-21797598

RESUMO

We have measured the beam-normal single-spin asymmetries in elastic scattering of transversely polarized electrons from the proton, and performed the first measurement in quasielastic scattering on the deuteron, at backward angles (lab scattering angle of 108°) for Q² = 0.22 GeV²/c² and 0.63 GeV²/c² at beam energies of 362 and 687 MeV, respectively. The asymmetry arises due to the imaginary part of the interference of the two-photon exchange amplitude with that of single-photon exchange. Results for the proton are consistent with a model calculation which includes inelastic intermediate hadronic (πN) states. An estimate of the beam-normal single-spin asymmetry for the scattering from the neutron is made using a quasistatic deuterium approximation, and is also in agreement with theory.

4.
Phys Rev Lett ; 104(1): 012001, 2010 Jan 08.
Artigo em Inglês | MEDLINE | ID: mdl-20366359

RESUMO

We have measured parity-violating asymmetries in elastic electron-proton and quasielastic electron-deuteron scattering at Q2=0.22 and 0.63 GeV2. They are sensitive to strange quark contributions to currents in the nucleon and the nucleon axial-vector current. The results indicate strange quark contributions of approximately < 10% of the charge and magnetic nucleon form factors at these four-momentum transfers. We also present the first measurement of anapole moment effects in the axial-vector current at these four-momentum transfers.

5.
Rev Sci Instrum ; 89(10): 104703, 2018 Oct.
Artigo em Inglês | MEDLINE | ID: mdl-30399652

RESUMO

Nuclear physics experiments performed at the Continuous Electron Beam Accelerator Facility (CEBAF) at the Jefferson Lab require a DC high voltage photogun to generate polarized electron beams from GaAs photocathodes. The photogun uses a tapered ceramic insulator that extends into the vacuum chamber and mechanically holds the cathode electrode. Increasing the operating voltage from nominal -130 kV to -200 kV will provide lower beam emittance, better transmission through injector apertures, and improved photocathode lifetime. This desire to increase the photogun operating voltage led to the design of a triple-point-junction shield electrode which minimizes the electric field at the delicate insulator-metal-vacuum interface and linearizes the potential across the insulator, thus reducing the risk of arcing along the ceramic insulator. This work describes the results obtained using COMSOL® electrostatic-field simulation software and presents the high voltage conditioning results of the upgraded -200 kV CEBAF photogun.

6.
Rev Sci Instrum ; 88(9): 093303, 2017 Sep.
Artigo em Inglês | MEDLINE | ID: mdl-28964191

RESUMO

The design and fabrication of electrodes for direct current (dc) high voltage photoemission electron guns can significantly influence their performance, most notably in terms of maximum achievable bias voltage. Proper electrostatic design of the triple-point junction shield electrode minimizes the risk of electrical breakdown (arcing) along the insulator-cable plug interface, while the electrode shape is designed to maintain <10 MV/m at the desired operating voltage aiming at little or no field emission once conditioned. Typical electrode surface preparation involves diamond-paste polishing by skilled personnel, requiring several weeks of effort per electrode. In this work, we describe a centrifugal barrel-polishing technique commonly used for polishing the interior surface of superconducting radio frequency cavities but implemented here for the first time to polish electrodes for dc high voltage photoguns. The technique reduced polishing time from weeks to hours while providing surface roughness comparable to that obtained with diamond-paste polishing and with unprecedented consistency between different electrode samples. We present electrode design considerations and high voltage conditioning results to 360 kV (∼11 MV/m), comparing barrel-polished electrode performance to that of diamond-paste polished electrodes. Tests were performed using a dc high voltage photogun with an inverted-geometry ceramic insulator design.

7.
Opt Lett ; 17(6): 399-401, 1992 Mar 15.
Artigo em Inglês | MEDLINE | ID: mdl-19784340

RESUMO

Using a sodium Raman laser that is pumped by a single-frequency cw dye laser, we have measured the narrow-band Raman gain that exists in the vicinity of the sodium D(1) line. Large gains (>10 cm(-1)) are measured at moderate pump intensities and sodium densities. The high gain allows us to detect directly a 1.772-GHz beat on the pump beam after it makes only a single pass through the sodium cell. By scanning the frequency of the sodium Raman laser while keeping the pump intensity and frequency constant, we are able to map out the Raman gain profile. The narrowness of the Raman gain is consistent with the narrow beat signal between the Raman-laser beam and the pump beam that was reported earlier [Opt. Lett. 16, 1853 (1991)].

8.
Opt Lett ; 16(23): 1853-5, 1991 Dec 01.
Artigo em Inglês | MEDLINE | ID: mdl-19784160

RESUMO

We demonstrate how the frequency of a single-mode cw dye laser can be translated by 1.772 GHz using stimulated Raman scattering in sodium vapor. The output of a sodium Raman laser, the frequency-translated beam, is shown to be highly correlated in frequency with the dye-laser pump beam. The bandwidth of the 1.772-GHz heterodyne beat signal between the two beams is found to be as narrow as 440 Hz, much narrower than the root-mean-square frequency jitter (~1 MHz) of the dye-laser pump beam. The Raman laser method can be used with materials other than sodium, such as cesium or magnesium, to obtain frequency translations of a magnitude that may not be easily attainable with acousto-optic or electro-optic techniques.

SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA