Microfluidics in drug delivery: review of methods and applications.

Microfluidics technology has emerged as a promising methodology for the fabrication of a wide variety of advanced drug delivery systems. Owing to its ability for accurate handling and processing of small quantities of fluidics as well as immense control over physicochemical properties of fabricated micro and nanoparticles (NPs), microfluidic technology has significantly improved the pharmacokinetics and pharmacodynamics of drugs. This emerging technology has offered numerous advantages over the conventional drug delivery methods for fabricating of a variety of micro and nanocarriers for poorly soluble drugs. In addition, a microfluidic system can be designed for targeted drug delivery aiming to increase the local bioavailability of drugs. This review spots the light on the recent advances made in the area of microfluidics including various methods of fabrication of drug carriers, their characterization, and unique features. Furthermore, applications of microfluidic technology for the robust fabrication and development of drug delivery systems, the existing challenges associated with conventional fabrication methodologies as well as the proposed solutions offered by microfluidic technology have been discussed in details.HighlightsMicrofluidic technology has revolutionized fabrication of tunable micro and nanocarriers.Microfluidic platforms offer several advantages over the conventional fabrication methods.Microfluidic devices hold great promise in controlling the physicochemical features of fabricated drug carriers.Micro and nanocarriers with controllable release kinetics and site-targeting efficiency can be fabricated.Drug carriers fabricated by microfluidic technology exhibited improved pharmacokinetic and pharmacodynamic profiles.

Pharmaceutical equivalency of locally and regionally manufactured generic pharmaceutical products in UAE.

Generic drugs or generic medicines are pharmaceutical products manufactured to be equivalent to the brand/innovator drug products. They represent the majority of worldwide prescribed medicines; therefore, their quality is critical to maximize patients' therapeutic outcomes. This study aimed to evaluate the pharmaceutical equivalency of locally and regionally manufactured generic pharmaceutical products being sold in the United Arab Emirates (UAE) market to enhance public confidence, promote their utilization, and reduce treatment costs. Three drugs (tadalafil, rosuvastatin, and acetaminophen) from three different pharmacological classes were selected from the UAE market as representatives for generic drugs. At least two generic products for each locally (L) and regionally (R) manufactured generic were evaluated according to the USP criteria in comparison to the brand (B) comparator product. All comparative tests were performed before storage and 3 and 6 months after storage during the accelerated stability study performed under the conditions for climatic zone IV (40 °C ± 2 °C /75% RH ± 5% RH). Although results were statistically different from the comparators using ANOVA and Tukey's Kremer post hoc tests, all tests were within the USP acceptance limits, except one, for friability, disintegration, content uniformity, and dissolution. Significant changes were observed following their storage over 6 months during accelerated stability studies, however, without failing the USP limits. Only one locally manufactured acetaminophen generic failed the USP dissolution tests before and after its storage and failed the disintegration test following its storage under accelerated conditions for zone IV. In conclusion, the majority of the locally and regionally manufactured generic products being sold in the UAE market were of good quality and performed similarly to their comparators. However, a continuous independent quality evaluation for the marketed generic drugs is essential to enhance public confidence.

Treating organophosphates poisoning: management challenges and potential solutions.

Organophosphorus agents (OP) are widely used as pesticides due to their cost effectiveness, yet they present a significant public health risk owing to their high toxicity, especially in cases of occupational exposure in agriculture, during suicide attempts using pesticides, and as nerve agents in warfare. Their vigorous permeability through inhalation, ingestion, and dermal exposure results in a high number of reported OP poisoning cases and alarming mortality rates. Initial first-aid management involves decontamination, ventilation, and hemodialysis. Additionally, current treatment guidelines recommend prompt administration of atropine as a first-line antidote, oximes as a follow-up, benzodiazepines for seizure control, and pyridostigmine for prophylaxis. Nevertheless, current treatment options are associated with several challenges. Thus, recent research has focused on investigating novel approaches for their potential in improving current management strategies. This article intends to review recent advances in OP poisoning treatment, including agents investigated for their use as an alternative or adjunctive therapy, novel formulations such as nasal drops or sublingual tablets for emergency administration of atropine, as well as innovative strategies for enhanced oximes delivery and overall efficacy. However, two major barriers may limit these innovations, ethical issues associated with their clinical assessment in emergencies, and limited profitability in countries where most cases occur.

Essential Oil-Based Design and Development of Novel Anti-Candida Azoles Formulation.

Candida is the most common fungal class, causing both superficial and invasive diseases in humans. Although Candida albicans is the most common cause of fungal infections in humans, C. auris is a new emergent serious pathogen causing complications similar to those of C. albicans. Both C. albicans and C. auris are associated with high mortality rates, mainly because of their multidrug-resistance patterns against most available antifungal drugs. Although several compounds were designed against C. albicans, very few or none were tested on C. auris. Therefore, it is urgent to develop novel effective antifungal drugs that can accommodate not only C. albicans, but also other Candida spp., particularly newly emergent one, including C. auris. Inspired by the significant broad-spectrum antifungal activities of the essential oil cuminaldehyde and the reported wide incorporation of azoles in the antifungal drugs, a series of compounds (UoST1-11) was designed and developed. The new compounds were designed to overcome the toxicity of the aldehyde group of cuminaldehyde and benefit from the antifungal selectivity of azoles. The new developed UoST compounds showed significant anti-Candida activities against both Candida species. The best candidate compound, UoST5, was further formulated into polymeric nanoparticles (NPs). The new formula, UoST5-NPs, showed similar activities to the nanoparticles-free drug, while providing only 25% release after 24 h, maintainng prolonged activity up to 48 h and affording no toxicity. In conclusion, new azole formulations with significantly enhanced activities against C. albicans and C. auris, while maintaining prolonged action and no toxicities at lower concentrations, were developed.

Age-dependent effect between MARCO and TLR4 on PMMA particle phagocytosis by macrophages.

Progressive generation of total joint implant-derived wear particles is one of the major risk factors in development of peri-prosthetic osteolysis especially in the aging society. It is commonly accepted that macrophages predominantly drive the inflammatory response to wear debris particles. Among various surface receptors that activate the macrophages to phagocytize particles, it is believed that the Toll-like receptor 4 (TLR4) and the scavenger macrophage receptor with collagenous structure (MARCO) play key roles in recognition of wear debris particles. However, a strong body of evidence indicates an age-dependent diminished function of human TLRs. Thus, we hypothesized that the MARCO receptor may be more engaged than TLRs in the phagocytosis of wear debris particles which in turn up-regulate production of pro-inflammatory cytokines from aged macrophages. We demonstrated that peritoneal macrophages isolated from aged mice show elevated expression of MARCO receptor compared to that from young mice. In contrast the expression of TLR4 was significantly decreased on the surface of aged macrophages. Furthermore, using anti-MARCO and anti-TLR4 neutralizing mAbs, we demonstrated the age-dependent pathogenic role of MARCO, but not TLR4, receptor in promoting poly-methyl methacrylate (PMMA) bone cement particles phagocytosis by macrophages leading to the release of pro-inflammatory cytokines migration inhibitory factor and tumour necrosis factor in vitro. These data also suggest that the approach to neutralize MARCO may lead to the development of therapeutic regimen for the prevention of particle-induced osteolysis in aged patients.

Effect of the filler grade on the characteristics and the sublingual permeability of atropine sulfate fast disintegrating sublingual tablets.

Context: AS FDSTs will provide an accessible alternative for AS autoinjector (ATROPEN®), and a noninvasive first-aid antidote for the treatment of organophosphate (OP) poisoning and reduce the number of fatalities due to nerve gas attacks or OP pesticide poisoning. Objective: The effects of changing the filler grade on the characteristics of atropine sulfate (AS) fast disintegrating sublingual tablets (FDSTs) and AS sublingual permeability were investigated in order to optimize the formulation of AS FDSTs and, therefore, AS sublingual permeability. Methods: Two batches of AS FDSTs containing AS 8 mg were formulated and manufactured using two different filler grades: microcrystalline cellulose (MCC) UF-702 (formulation A) and MCC PH-301 (formulation B). Several United States Pharmacopeia (USP) and non-USP physical tests were performed to evaluate the AS FDSTs' characteristics. The AS permeability from the two AS FDST batches were evaluated using Franz cells through excised porcine sublingual membranes. Results were statistically compared at p < .05. Results: Both batches passed the content uniformity and friability tests. Formulation A tablets were significantly different from formulation A tablets and resulted in better powder flowability, higher breaking force, faster disintegration, faster dissolution rate, higher water uptake, and higher AS permeability. Conclusion: The selection of the filler grade to be used in the formulation of AS FDSTs can significantly impact their characteristics and significantly affect AS sublingual permeability, which can be used to improve the sublingual delivery of AS and the potential of using AS FDSTs as an alternative dosage form for the first-aid treatment of OP poisoning.

Effect of Fast-Disintegrating Tablets' Characteristics on the Sublingual Permeability of Atropine Sulfate for the Potential Treatment of Organophosphates Toxicity.

Atropine sulfate (AS) fast-disintegrating sublingual tablets (FDSTs) were tested for AS sublingual permeation's feasibility as a potential alternative dosage form to treat organophosphates (OP) toxicity. More than 12,000 OP pesticide toxicity cases were reported in the USA from 2011 to 2014. AS is the recommended antidote for OP toxicity; however, it is only available as an ATROPEN® auto-injector, an IM injection, for self-administration, which is associated with several drawbacks and limitations. Six AS FDST batches were formulated and characterized. Two tablet sizes, group A weighing 150 mg and group B weighing 50 mg, were formulated with three different AS doses: 2 mg (A1 and B1), 4 mg (A2 and B2), and 8 mg (A3 and B3). AS in vitro diffusion and sublingual permeation were investigated in Franz cells using a cellulose membrane and an excised porcine sublingual membrane. The effect of AS load and tablet size on sublingual permeation was also evaluated. All batches passed quality control tests. AS FDSTs' size and AS load had a significant effect on tablet disintegration time and drug dissolution, which significantly impacted AS concentration gradient across the diffusional membrane. Group B FDSTs (smaller tablets) resulted in a significantly higher initial permeation (JAUC0-15) compared to group A FDSTs. Also, the cumulative AS (JAUC0-90) and AS influx (J) increased linearly with increasing AS dose. These AS FDSTs have the potential to be explored in vivo to determine the required bioequivalent sublingual AS dose as an alternative dosage form for the treatment of OP toxicity.

In Vivo Evaluation of Taste-Masked Fast-Disintegrating Sublingual Tablets of Epinephrine Microcrystals.

In community settings, IM injection of 0.3 mg epinephrine (Epi) using an auto-injector is the drug of choice for treatment of anaphylaxis. Previously, a taste-masking (TM) formulation of fast-disintegrating sublingual tablets (FDSTs) was developed in our lab. Also, Epi was micronized (Epi-MC) successfully and reduced the previously achieved bioequivalent sublingual Epi dose to 0.3 mg IM injection by half using non-taste-masked fast-disintegrating sublingual tablets (TM-FDSTs). Our objective for this study was to evaluate the sublingual absorption of Epi-MC using TM-FDST. These sublingual Epi tablets have potential for out-of-hospital treatment of anaphylaxis and are suitable for human studies. TM-FDSTs containing Epi-MC were manufactured by direct compression. The rate and extent of Epi absorption from our developed 20 mg Epi-MC-TM-FDSTs (n = 5) were evaluated in rabbits and compared to the previous result from 20 mg Epi-MC in non-TM-FDSTs and EpiPen® auto-injector. Blood samples were collected over 1 h, and Epi concentrations were measured using HPLC with electrochemical detection. Mean ± SEM AUC0-1 h and Cmax from 20 mg Epi-MC-TM-FDSTs (733 ± 78 ng/ml/min and 30 ± 8 ng/ml) and 20 mg Epi-MC-non-TM-FDSTs (942 ± 109 ng/ml/min and 38 ± 4 ng/ml) were not significantly different (p > 0.05) from each other or from EpiPen® (592 ± 50 ng/ml/min and 28 ± 3 ng/ml) but were significantly higher (p < 0.05) than endogenous Epi after placebo FDSTs (220 ± 32 ng/ml/min and 8 ± 1 ng/ml). Mean ± SD Tmax was not significantly different (p > 0.05) among all formulations. Epi-MC-TM-FDSTs formulation improved Epi absorption twofold and reduced the required bioequivalent dose by 50%, similar to results obtained using non-TM-FDSTs. The incorporation of TM excipients did not interfere with the absorption of Epi-MC.

Formulation and Evaluation of Fast-Disintegrating Sublingual Tablets of Atropine Sulfate: the Effect of Tablet Dimensions and Drug Load on Tablet Characteristics.

In this study, we formulated and evaluated the effects of tablet dimensions and drug load on the characteristics of atropine sulfate (AS) fast-disintegrating sublingual tablets (FDSTs). We aim to develop AS FDSTs as an alternative non-invasive and portable dosage form for the emergency treatment of organophosphate (OP) toxicity. AS autoinjector, AtroPen®, is the only self-administered dosage form available as an antidote for-out-of-hospital emergency use, but it is associated with several limitations and drawbacks. Seven FDST formulations of two tablet sizes, 150 mg (A) and 50 mg (B), and of several AS loads, 0 mg (A1, B1), 2 mg (A2, B2), 4 mg (B3), and 8 mg (B4a, B4b), were formulated and manufactured by direct compression. AS FDST characteristics were evaluated using USP and non-USP tests. Results were statistically compared at p < 0.05. All FDSTs passed the USP content uniformity and friability tests, disintegrated and released AS in ≤30 and 60 s. B1 and B2 were significantly harder than A1 and A2. Water uptake of A1 was significantly the highest. However, B1 and B2 had shorter disintegration and wetting times and higher amounts of AS dissolved than did A1 and A2 (p < 0.05). Increasing AS negatively affected FDST tensile strength (p < 0.05 for B4a) and water uptake (p < 0.05 for B3, B4a and B4b), however, without affecting AS dissolution. Formulation of AS up to 16% into smaller FDSTs was successful. Smaller FDSTs were harder and disintegrated more quickly. These AS FDSTS have the potential for further in vivo testing to evaluate their OP antidote potential.

Epinephrine doses delivered from auto-injectors stored at excessively high temperatures.

CONTEXT: Prompt injection of epinephrine (adrenaline) from epinephrine auto-injectors (EAIs) is the primary treatment for anaphylaxis in out-of-hospital settings. Storage of EAIs at room temperature (25 °C) is advised; however, storage at excessively high temperatures sometimes occurs. To our knowledge, there are no previous publications on the doses of epinephrine ejected from EAIs after storage at such temperatures. OBJECTIVE: We examined the epinephrine doses delivered from activated EAIs stored constantly or cyclically at 70 °C. METHODS: Twenty-five in-date EAIs were stored constantly or cyclically at 70 °C (excessive heat) or 25 °C (controls) for 5 d or 10 d. EAIs were activated and the epinephrine doses in the ejected solutions were measured using HPLC-UV. The enantiomeric purity of epinephrine was also measured by HPLC-UV. RESULTS: Control EAIs ejected a volume of 0.300 ± 0.006 mL containing 103.7 ± 3.3% of labeled dose (LD). After 5 d or 10 d of constant storage at 70 °C and activation at 70 °C, EAIs ejected a volume of 0.367 ± 0.008 mL containing 96.8 ± 3.8% LD and 0.373 ± 0.007 mL containing 77.7 ± 3.3% LD, respectively. After 5 d of cyclic storage at 70 °C and cooling to 25 °C before activation, EAIs ejected a volume of 0.311 ± 0.008 mL containing 87.2 ± 1.9% LD. Under the experimental conditions of this study, the resultant chromatographic peaks of epinephrine solutions from all EAIs represented only the pure l-enantiomer of epinephrine. CONCLUSION: EAIs should be stored under recommended conditions of the manufacturer. EAIs stored at excessively high temperatures cannot be used to treat humans while still hot, and when cooled, cannot be relied on to deliver the labeled epinephrine dose in anaphylaxis.

Effect of lipid viscosity and high-pressure homogenization on the physical stability of "Vitamin E" enriched emulsion.

Recently there has been a growing interest in vitamin E for its potential use in cancer therapy. The objective of this work was therefore to formulate a physically stable parenteral lipid emulsion to deliver higher doses of vitamin E than commonly used in commercial products. Specifically, the objectives were to study the effects of homogenization pressure, number of homogenizing cycles, viscosity of the oil phase, and oil content on the physical stability of emulsions fortified with high doses of vitamin E (up to 20% by weight). This was done by the use of a 27-run, 4-factor, 3-level Box-Behnken statistical design. Viscosity, homogenization pressure, and number of cycles were found to have a significant effect on particle size, which ranged from 213 to 633 nm, and on the percentage of vitamin E remaining emulsified after storage, which ranged from 17 to 100%. Increasing oil content from 10 to 20% had insignificant effect on the responses. Based on the results it was concluded that stable vitamin E rich emulsions could be prepared by repeated homogenization at higher pressures and by lowering the viscosity of the oil phase, which could be adjusted by blending the viscous vitamin E with medium-chain triglycerides (MCT).

Sublingual Diffusion of Epinephrine Microcrystals from Rapidly Disintegrating Tablets for the Potential First-Aid Treatment of Anaphylaxis: In Vitro and Ex Vivo Study.

For the first-aid treatment of anaphylaxis, epinephrine (Epi) 0.3 mg intramuscular (IM) injection in the thigh is the drug of choice. Epi auto-injectors are widely recommended for anaphylaxis treatment in community settings but not necessarily carried or used as prescribed when anaphylaxis occurs. We therefore developed rapidly disintegrating sublingual tablets (RDSTs) as an alternative noninvasive dosage form. Our objective in this study was to evaluate the effect of reducing Epi particle size on its in vitro and ex vivo diffusion, with the goal of enhancing Epi sublingual absorption from Epi RDSTs. Epi particle size was reduced by top-bottom technique using a microfluidizer for one pass at 30,000 Psi. The micronized Epi crystals (Epi-MC) were characterized using Zetasizer, Fourier transform infrared (FT-IR), differential scanning calorimetry (DSC), and scanning electron microscopy (SEM). Epi RDSTs were formulated and manufactured using our previously developed method. In vitro and ex vivo diffusion of Epi 10, 20, and 40 mg RDSTs and Epi-MC 10 and 20 mg RDSTs (n = 4) were evaluated using Franz cells. Epi 10 mg solution was used as a control. Mean (±standard deviation (SD)) Epi particle size was successfully reduced from 131.8 ± 10.5 to 2.5 ± 0.4 µm. Cumulative Epi diffused and influx from 40 mg Epi RDSTs and 20 mg Epi-MC RDSTs were not significantly different from each other in vitro and ex vivo (p > 0.05). Also, Epi permeability from 20 mg Epi-MC RDSTs was significantly higher than from the rest (p < 0.05). Epi-MC RDSTs improved Epi diffusion twofold and might have the potential to reduce the Epi dose needed in RDSTs by 50%.

Assessment of enhancing curcumin's solubility versus uptake on its anti-cancer efficacy.

Curcumin (CUR) exhibits anti-inflammatory and anti-cancer activities. However, its poor solubility and bioavailability limit its therapeutic applications. Several CUR nano-formulations have been developed to enhance its solubility and uptake, thereby improving its anti-cancer activity. Despite this, studies comparing the effect of enhanced CUR solubility versus cellular uptake on its anti-cancer efficacy are lacking. Therefore, CUR nanofibers (CUR NF) were synthesized by electrospinning using a water-soluble polymer to enhance CUR solubility. While CUR nanoparticles (CUR NP) were synthesized by nanoprecipitation method using a water-insoluble polymer to enhance CUR cellular uptake. Both nano-formulations aim to improve CUR cellular concentration and anti-cancer activity against various cancer cells. CUR NF and CUR NP were successfully synthesized at drug load (DL%) of 10 %, 20 %, and 40 % w/w. Both nano-formulations were characterized, and CUR dissolution, release, cytotoxicity, IC50, and cellular uptake were assessed. A gradual increase in NF diameter and NP size was observed as the drug load% increased compared to the placebo. NF showed a rapid CUR release and increased solubility by 16-38 fold. In contrast, NP sustained CUR release and resulted in only a 2-fold increase in solubility. Both formulations significantly reduced cell viability and IC50 compared to free CUR. However, CUR NP demonstrated higher cell toxicity (70-80 %) than CUR NF (60 %) and reduced IC50 up to 4 µM compared to 11 µM for NF. Enhancing CUR solubility or uptake can significantly increase its cellular concentration and anti-cancer activity. However, enhancing CUR cellular uptake by NP demonstrated superior anti-cancer effect compared to enhancing its solubility by NF.

Nano-combination for Reviving the Activity of Fluconazole against Rhizopus delemar.

BACKGROUND: Rhizopus delemar, the main causative pathogen for the lethal mucormycosis and a severe threat during the COVID-19 pandemic, is resistant to most antifungals, including fluconazole, a known selective antifungal drug. On the other hand, antifungals are known to enhance fungal melanin synthesis. Rhizopus melanin plays an important role in fungal pathogenesis and in escaping the human defense mechanism, thus complicating the use of current antifungal drugs and fungal eradication. Because of drug resistance and the slow discovery of effective antifungals, sensitizing the activity of older ones seems a more promising strategy. METHODS: In this study, a strategy was employed to revive the use and enhance the effectiveness of fluconazole against R. delemar. UOSC-13, a compound synthesized in-house to target the Rhizopus melanin, was combined with fluconazole either as is or after encapsulation in poly (lactic-coglycolic acid) nanoparticles (PLG-NPs). Both combinations were tested for the growth of R. delemar, and the MIC50 values were calculated and compared. RESULTS: The activity of fluconazole was found to be enhanced several folds following the use of both combined treatment and nanoencapsulation. The combination of fluconazole with UOSC-13 caused a 5-fold reduction in the MIC50 value of fluconazole. Furthermore, encapsulating UOSC-13 in PLG-NPs enhanced the activity of fluconazole by an additional 10 folds while providing a wide safety profile. CONCLUSION: Consistent with previous reports, the encapsulation of fluconazole without sensitization showed no significant difference in activity. Collectively, sensitization of fluconazole represents a promising strategy to revive the use of outdated antifungal drugs back in the market.

Formulation and optimization of ivermectin nanocrystals for enhanced topical delivery.

The increasing resistance to antiparasitic drugs and limited availability of new agents highlight the need to improve the efficacy of existing treatments. Ivermectin (IVM) is commonly used for parasite treatment in humans and animals, however its efficacy is not optimal and the emergence of IVM-resistant parasites presents a challenge. In this context, the physico-chemical characteristics of IVM were modified by nanocrystallization to improve its equilibrium water-solubility and skin penetration, potentially improving its therapeutic effectiveness when applied topically. IVM-nanocrystals (IVM-NC) were prepared using microfluidization technique. The impact of several process/formulation variables on IVM-NC characteristics were studied using D-optimal statistical design. The optimized formulation was further lyophilized and evaluated using several in vitro and ex vivo tests. The optimal IVM-NC produced monodisperse particles with average diameter of 186 nm and polydispersity index of 0.4. In vitro results showed an impressive 730-fold increase in the equilibrium solubility and substantial 24-fold increase in dissolution rate. Ex vivo permeation study using pig's ear skin demonstrated 3-fold increase in dermal deposition of IVM-NC. Additionally, lyophilized IVM-NC was integrated into topical cream, and the resulting drug release profile was superior compared to that of the marketed product. Overall, IVM-NC presents a promising approach to improving the effectiveness of topically applied IVM in treating local parasitic infections.

Polymeric Nanoparticles as Tunable Nanocarriers for Targeted Delivery of Drugs to Skin Tissues for Treatment of Topical Skin Diseases.

The topical route is the most appropriate route for the targeted delivery of drugs to skin tissues for the treatment of local skin diseases; however, the stratum corneum (SC), the foremost layer of the skin, acts as a major barrier. Numerous passive and active drug delivery techniques have been exploited to overcome this barrier; however, these modalities are associated with several detrimental effects which restrict their clinical applicability. Alternatively, nanotechnology-aided interventions have been extensively investigated for the topical administration of a wide range of therapeutics. In this review, we have mainly focused on the biopharmaceutical significance of polymeric nanoparticles (PNPs) (made from natural polymers) for the treatment of various topical skin diseases such as psoriasis, atopic dermatitis (AD), skin infection, skin cancer, acute-to-chronic wounds, and acne. The encapsulation of drug(s) into the inner core or adsorption onto the shell of PNPs has shown a marked improvement in their physicochemical properties, avoiding premature degradation and controlling the release kinetics, permeation through the SC, and retention in the skin layers. Furthermore, functionalization techniques such as PEGylation, conjugation with targeting ligand, and pH/thermo-responsiveness have shown further success in optimizing the therapeutic efficacy of PNPs for the treatment of skin diseases. Despite enormous progress in the development of PNPs, their clinical translation is still lacking, which could be a potential future perspective for researchers working in this field.

Novel Anti-Acanthamoebic Activities of Irosustat and STX140 and Their Nanoformulations.

Pathogenic Acanthamoeba produce keratitis and fatal granulomatous amoebic encephalitis. Treatment remains problematic and often ineffective, suggesting the need for the discovery of novel compounds. For the first time, here we evaluated the effects of the anticancer drugs Irosustat and STX140 alone, as well as their nanoformulations, against A. castellanii via amoebicidal, excystment, cytopathogenicity, and cytotoxicity assays. Nanoformulations of the compounds were successfully synthesized with high encapsulation efficiency of 94% and 82% for Irosustat and STX140, respectively. Nanoparticles formed were spherical in shape and had a unimodal narrow particle size distribution, mean of 145 and 244 nm with a polydispersity index of 0.3, and surface charge of -14 and -15 mV, respectively. Irosustat and STX140 exhibited a biphasic release profile with almost 100% drug released after 48 h. Notably, Irosustat significantly inhibited A. castellanii viability and amoebae-mediated cytopathogenicity and inhibited the phenotypic transformation of amoebae cysts into the trophozoite form, however their nanoformulations depicted limited effects against amoebae but exhibited minimal cytotoxicity when tested against human cells using lactate dehydrogenase release assays. Accordingly, both compounds have potential for further studies, with the hope of discovering novel anti-Acanthamoeba compounds, and potentially developing targeted therapy against infections of the central nervous system.

Oromucosal delivery of macromolecules: Challenges and recent developments to improve bioavailability.

Owing to their biological diversity, high potency, good tolerability, low immunogenicity, site-specific activity, and great efficacy, macromolecular drugs (i.e., proteins and peptides, antibodies, hormones, nucleic acids, vaccines, etc.) are extensively used as diagnostics, prophylactics, and therapeutics in various diseases. To overcome drawbacks associated with parenteral (invasive) delivery of macromolecules as well as to preserve their therapeutic integrity, oromucosal route (sublingual and buccal) has been proven efficient alternate port of delivery. This review aims to summarize challenges associated with oromucosal route and overtime developments in conventional delivery systems with special emphasis on most recent delivery strategies. Over the past few decades, significant efforts have been made for improving the oromucosal absorption of macromolecules by employing chemical penetration enhancers (CPE), enzyme inhibitors, chemical modification of drug structure (i.e., lipidation, PEGylation, etc.), and mucoadhesive materials in the form of buccal tablets, films (or patches), sprays, fast disintegrating tablets, and microneedles. Adaptation of adjunct strategies (e.g., iontophoresis in conjunction with CPE) has shown significant improvement in oromucosal absorption of macromolecules; however, these approaches were also associated with many drawbacks. To overcome these shortcomings and to further improve therapeutic outcomes, specialized delivery devices called "hybrid nanosystems" have been designed in recent times. This newer intervention showed promising potential for promoting oromucosal absorption and absolute bioavailability of macromolecules along with improved thermostability (cold chain free storage), enabling self-administration, site-specific activity, improving therapeutic efficacy and patient compliance. We anticipate that tailoring of hybrid nanosystems to clinical trials as well as establishing their short- and long-term safety profile would substantiate their therapeutic value as pharmaceutical devices for oromucosal delivery of macromolecules.

Dissolving microneedles with antibacterial functionalities: A systematic review of laboratory studies.

Dissolving microneedles (MN) with enhanced physiochemical properties are generating considerable interest as antibacterial delivery devices, which minimize hazardous sharp wastes, injuries, and transmission of blood-borne pathogens. This systematic review demonstrates and analyzes the current state of dissolvable antibacterial MN to establish their efficacy, and the effect of biomaterials selection on their final properties. A systematic review was conducted according to Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines. Three electronic databases Pubmed, Google scholar, and Scopus were explored for peer-reviewed articles. A total of 551 results with 176 citations and 915 references of resulted articles were reviewed and analyzed. No publication date restrictions were imposed. Last search was placed on 9th of June, 2021. The literature search in electronic databases according to the inclusion criteria was funneled down to 20 papers that were related to antibacterial effects of dissolving microneedles. In conclusion, all included dissolving MN studies presented an enhanced or at least an equal antibacterial activity against common bacterial species when compared to conventional treatments. In addition, composition modifications can enhance their activity and performance. Other factors such as the size and geometry of the produced MN can be tailored to conform to the infected site's characteristics.

Repurposing Potential of the Antiparasitic Agent Ivermectin for the Treatment and/or Prophylaxis of COVID-19.

Due to the rapid, vast, and emerging global spread of the Coronavirus Disease 2019 (COVID-19) pandemic, many drugs were quickly repurposed in a desperate attempt to unveil a miracle drug. Ivermectin (IVM), an antiparasitic macrocyclic lactone, was tested and confirmed for its in vitro antiviral activity against severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2) in early 2020. Along with its potential antiviral activity, the affordability and availability of IVM resulted in a wide public interest. Across the world, trials have put IVM to test for both the treatment and prophylaxis of COVID-19, as well as its potential role in combination therapy. Additionally, the targeted delivery of IVM was studied in animals and COVID-19 patients. Through this conducted literature review, the potential value and effectiveness of the repurposed antiparasitic agent in the ongoing global emergency were summarized. The reviewed trials suggested a value of IVM as a treatment in mild COVID-19 cases, though the benefit was not extensive. On the other hand, IVM efficacy as a prophylactic agent was more evident and widely reported. In the most recent trials, novel nasal formulations of IVM were explored with the hope of an improved optimized effect.