Does the degree of substitution on the cyclodextrin hosts impact their affinity towards guest binding?

Although cyclodextrins have been extensively utilized in various branches of supramolecular chemistry due to their numerous attractive attributes, however, to achieve even advanced applications, they often need structural modification through substitutions of suitable functional groups at their rims. A systematic investigation on how the degree of substitution on the cyclodextrin rims affects the binding affinity for a given guest molecule has however rarely been reported, especially from the perspective of photophysical studies. Herein, we report the non-covalent interaction of a styryl based dye, LDS-798, with three different sulfobutylether beta cyclodextrin (SBEnßCD) derivatives bearing varying degrees of substitution (n), using ground state absorption, steady-state emission, excited-state lifetime and time-resolved fluorescence anisotropy measurements. The dye-host binding constant values indicate that the strength of the interaction between LDS-798 and SBEnßCD derivatives follows an increasing trend with an increasing number of tethered sulfobutylether substituents on the cyclodextrin rims, which is attributed to the gradual increase of the electrostatic interaction between the negatively charged sulfobutylether groups and the positively charged LDS-798. Excited state lifetime measurements and ionic strength dependent studies on the dye-SBEnßCD complexes further support the increased affinity between the dye and the host in the supramolecular complexes, with an increasing number of sulfobutylether substituents on the ßCD rims. The obtained results suggest that the molecular recognition of LDS-798 with SBEnßCD derivatives can be tuned very effectively by varying the number of sulfobutylether substituents on the cyclodextrin rims. Considering that SBE7ßCD is one of the FDA approved agents for drug formulations, the obtained results with other SBEnßCD hosts may be useful in designing selective drug delivery applications, drug formulations, and effective fluorescence on-off switches.

A styryl based fluorogenic probe with high affinity for a cyclodextrin derivative.

Supramolecular host-guest pairs, with a very high association constant, represent excellent molecular recognition motifs, and serve as useful building blocks for numerous exciting supramolecular functional materials. Cyclodextrins, an important class of glucopyranose-based hosts, generally, suffer from low affinity for most guest molecules (102-104 M-1). Herein, we report a styryl-based fluorogenic probe which registers a very high association constant of 7.84 × 105 M-1 with sulfobutylether substituted ß-cyclodextrin in contrast to a low association constant of 1.89 × 102 M-1 with unmodified ß-cyclodextrin (ß-CD). This exceptionally high binding affinity of the fluorogenic probe with the sulfobutylether substituted ß-CD has been attributed to the strong electrostatic interactions between the cationic guest and the polyanionic host along with improved hydrophobic interactions due to the extended butylether groups present on the rims of the cyclodextrin cavity. The significant modulations in the photophysical properties of guest molecule, upon interaction with host molecule, have been investigated, in detail, using ground-state absorption, steady-state fluorescence and time-resolved emission measurements. The effect of temperature and ionic strength of the medium have been employed to investigate the nature of the underlying interactions in the present host-guest system. The possibility of indicator displacement assay involving the present host-guest system has also been demonstrated using a competitive binder.

Modulation of the Photophysical Properties of ß-substituted BODIPY Dyes.

Photophysical properties of BODIPY dyes containing acetyl acetone and benzoyl acetone BF2 unit as an electron accepting substituent at beta position linked via double bond have been investigated using a wide range of solvents of different polarities. The substitution effect at beta position of the BODIPY dyes on their absorption, emission and quantum yield of fluorescence have been the aim of present study. For the synthesized BODIPY dyes fluorescence quantum yields and lifetimes show very sharp decrease with an increase in the solvent polarity, suggesting the involvement of highly polar ICT state de-excitation mechanism along with the local excitation process. The polarity dependent changes in average fluorescence life time and quantum yield values rationalize the formation of ICT states.

Enhanced fluorescence of aqueous BODIPY by interaction with cavitand cucurbit[7]uril.

One cationic BODIPY chromophore was synthesized and its complexation behaviour with the macrocyclic host cucurbit[7]uril (CB[7]) was studied using different spectroscopy techniques such as UV-vis absorption, steady-state and time-resolved fluorescence, 1H NMR as well as DFT based quantum calculations. The dye showed formation of a 1 : 1 dye-CB[7] complex with improvement in the fluorescence intensity. These new results of the formation of moderate association of aqueous BODIPYs with the nontoxic host CB[7] may lead to promising applications of the dye molecule as a sensitive and efficient off-on mode fluorescent probe in chemical and biological studies.

Proton Induced Modulation of ICT and PET Processes in an Imidazo-phenanthroline Based BODIPY Fluorophores.

BODIPY fluorophores linked with an imidazo-phenanthroline donor at α and ß positions have been synthesized. Intriguing intramolecular charge transfer phenomenon is observed in both the dyes which has been extensively investigated using UV-vis absorption, steady-state and time-resolved fluorescence measurements. H-bonding and intrinsic polarity of the solvents has modulated the absorption and emission bands of these fluorophores strongly causing significant increase in the Stokes shifts. In spite of having difference only in terms of the position of donor subunit, the photophysics of these dyes are not only significantly different from each other, but contradictory too. Interestingly, acidochromic studies revealed the shuttling mechanism between ICT and PET processes for BDP 2. Quantum chemical calculations have been employed further to support experimental findings. DFT and TD-DFT method of analysis have been used to optimize ground and excited state geometries of the synthesized dyes.

Solvent-Driven Conformational Exchange for Amide-Linked Bichromophoric BODIPY Derivatives.

The fluorescence lifetime and quantum yield are seen to depend in an unexpected manner on the nature of the solvent for a pair of tripartite molecules composed of two identical boron dipyrromethene (BODIPY) residues attached to a 1,10-phenanthroline core. A key feature of these molecular architectures concerns the presence of an amide linkage that connects the BODIPY dye to the heterocyclic platform. The secondary amide derivative is more sensitive to environmental change than is the corresponding tertiary amide. In general, increasing solvent polarity, as measured by the static dielectric constant, above a critical threshold tends to reduce fluorescence but certain hydrogen bond accepting solvents exhibit anomolous behaviour. Fluorescence quenching is believed to arise from light-induced charge transfer between the two BODIPY dyes, but thermodynamic arguments alone do not explain the experimental findings. Molecular modelling is used to argue that the conformation changes in strongly polar media in such a way as to facilitate improved rates of light-induced charge transfer. These solvent-induced changes, however, differ remarkably for the two types of amide.

Congeners of Pyrromethene-567 Dye: Perspectives from Synthesis, Photophysics, Photostability, Laser, and TD-DFT Theory.

In an attempt to develop photostable and efficient BODIPY (PM) dyes for use in liquid dye lasers, three new congeners of widely used laser dye, PM567, were synthesized and their photophysical properties in various organic solvents, laser performances, and photostabilities in a selected solvent, 1,4-dioxane, have been investigated using a frequency doubled Q-switched (10 Hz) Nd:YAG laser at 532 nm. The results of photostability study in nonpolar 1,4-dioxane revealed the remarkable enhancement in stability of the novel dyes compared to that of PM567 as well as improved laser performances. Cyclic voltammetry study strongly supports the observed enhancement in photostability of the novel dyes compared to that of PM567. The observed properties of the novel dyes in relation to those of PM567 have been rationalized by extensive use of DFT and TD-DFT using the B3LYP/6-31G(d) method of theory.

Novel pyrromethene dyes with N-ethyl carbazole at the meso position: a comprehensive photophysical, lasing, photostability and TD-DFT study.

Two novel BODIPY (pyrromethene, PM) dyes containing N-ethyl carbazole at the meso position are synthesized and their photophysical properties in different solvents and the photochemical stabilities and laser performances in n-heptane are investigated. The n-heptane solution of the dyes was used as a gain medium in a constructed narrow band dye laser, pumped by a Q-switched (10 Hz) frequency-doubled (532 nm) Nd:YAG laser and the results gave enhanced photo stabilities and similar peak efficiencies of the synthesized dyes as compared to parent dye PM567. When substituted at the meso position with N-alkyl carbazole, photostability is found to be increased in comparison to PM567, and also when substituted at 2- and 6-positions with a benzyl group instead of an ethyl group along with N-ethyl carbazole at the meso position, the photo stability is further increased in n-heptane. A comprehensive study on structural, photophysical and electronic properties of dyes by means of DFT and TD-DFT in the solvents of various polarities has revealed remarkable characteristics of the BODIPY chromophore.

High laser efficiency and photostability of pyrromethene dyes mediated by nonpolar solvent.

Many pyrromethene (PM) dyes have been shown to outperform established rhodamine dyes in terms of laser efficiency in the green-yellow spectral region, but their rapid photochemical degradation in commonly used ethanol or methanol solvents continues to limit its use in high average power liquid dye lasers. A comparative study on narrowband laser efficiency and photostability of commercially available PM567 and PM597 dyes, using nonpolar n-heptane and 1,4-dioxane and polar ethanol solvents, was carried out by a constructed pulsed dye laser, pumped by the second harmonic (532 nm) radiation of a Q-switched Nd:YAG laser. Interestingly, both nonpolar solvents showed a significantly higher laser photostability (∼100 times) as well as peak efficiency (∼5%) of these PM dyes in comparison to ethanol. The different photostability of the PM dyes was rationalized by determining their triplet-state spectra and capability to generate reactive singlet oxygen (O21) by energy transfer to dissolved oxygen in these solvents using pulse radiolysis. Heptane is identified as a promising solvent for these PM dyes for use in high average power dye lasers, pumped by copper vapor lasers or diode-pumped solid-state green lasers.

Masking and demasking strategies for the BF2-BODIPYs as a tool for BODIPY fluorophores.

An efficient and chemoselective route for transforming BF2-BODIPYs to Et2B-BODIPYs (masking) was developed using Et2AlCl. The Et groups can be easily replaced with F atoms using BF3·Et2O in moist CH2Cl2 to regenerate the BF2-BODIPYs (demasking). The masking-demasking strategy is very useful for synthesizing functionalized BODIPYs via nucleophilic and reductive reactions. The masking strategy was used to synthesize a BODIPY dimer by McMurry coupling of a formyl Et2B-BODIPY, while a new BODIPY with an asymmetrically substituted B-center was synthesized using the demasking strategy.

Rational design of boradiazaindacene (BODIPY)-based functional molecules.

Three boradiazaindacene (BODIPY) dyes with different-coloured (greenish-yellow, orange and red) fluorescence and good Stokes shifts were synthesised starting from the greenish-yellow BODIPY dye PM546. The high Stokes shifts of the dyes are due to the release of the steric strain in their excited states relative to that in the highly twisted ground states. One of these compounds might be a useful water-soluble fluorophore, whereas the other two are promising H(+) sensors.

Change of boron substitution improves the lasing performance of Bodipy dyes: a mechanistic rationalisation.

Bodipy laser dyes are highly efficient but degrade rapidly in solution by reacting with in situ generated singlet oxygen ((1)O(2)). To increase the lasing lifetimes of these dyes, we have designed and synthesised two different congeners of the widely studied Pyrromethene 567 (PM567) by substitution at the boron centre and/or at both the boron centre and the meso position. The two new dyes showed high lasing efficiencies with increased photostability. The results of theoretical and pulse radiolysis studies revealed that the substitution at the boron centre reduced the (1)O(2) generation capacity of these dyes as well as their rate of reaction with (1)O(2), thereby enhancing their lifetimes even under lasing conditions.

Waste derived approach towards wealthy fluorescent N-doped graphene quantum dots for cell imaging and H2O2 sensing applications.

Herein, we report the synthesis of a highly fluorescent nitrogen doped graphene quantum dots (N-GQDs) from waste precursors such as melamine sponge and arjuna bark via a microwave treatment and its functional and morphological characterization using various spectroscopy techniques such as optical, FTIR, XPS and TEM. The as-prepared aqueous N-GQD (dia. 2-3 nm) was used for the bio-imaging application using breast carcinoma cell line (MDA-MB-231) as a model, and the locations of all cells in the cytoplasm as well as nuclei were observed to stain brightly in blue fluorescent color successfully. In addition to that, the aqueous N-GQD showed fluorescence quenching behavior in the presence of hydrogen peroxide, which was exploited to sense H2O2, a probable toxin generated in the diseased cells. Importantly, the cell cytotoxicity was measured and found to be non-toxic (70% survival) to the MDA-MB-231 cells even at very high concentration (∼1.8 mg/ml) of the synthesized N-GQD. This study revealing excellent biocompatibility and imaging of the model cancer cells, and sensing of H2O2 by fluorescent quenching, indicates potential in-vivo cell culture applications of the prepared fluorescent N-GQD.

Stimuli Responsive Confinement of a Molecular Rotor Based BODIPY Dye inside a Cucurbit[7]uril Nanocavity.

Present study reports the interaction of a molecular rotor based BODIPY dye, 8-anilino-BODIPY (ABP), with a versatile macrocyclic molecule, cucurbit[7]uril (CB7), investigated through various techniques such as ground-state absorption, steady-state fluorescence, time-resolve emission, proton NMR, and quantum chemical studies. Although BODIPY dyes have widespread applications due to their intriguing photochemical properties, studies on their noncovalent interactions with different macrocyclic hosts, especially regarding their supramolecularly induced modulations in photophysical properties are very limited. The investigated BODIPY dye, especially its protonated ABPH+ form (pH ∼ 1), shows a large fluorescence enhancement on its interaction with the CB7 host, due to large reduction in the structural flexibility for the bound dye, causing a suppression in its nonradiative de-excitation process in the excited state. Unlike ABPH+, the neutral ABP form (pH ∼ 7) shows considerably weaker interaction with CB7. For ABPH+-CB7 system, observed photophysical results indicate formation of both 1:1 and 1:2 dye-to-host complexes. Plausible geometries of these complexes are obtained from quantum chemical studies which are substantiated nicely from 1H NMR results. The response of the ABPH+-CB7 system toward changing temperature of the solution have also been investigated elaborately to understand the potential of the system in different stimuli-responsive sensor applications.

Molecular encapsulation of fluorescent dyes affords efficient narrow-band dye laser operation in water.

A water-based narrow-band high-efficiency dye laser was designed by means of a supramolecular host-guest chemical approach. The lasing characteristics of rhodamine B and sulforhodamine B (Kiton Red S) dyes in aqueous solution with the macrocyclic host cucurbit[7]uril (CB7) as additive were investigated in a narrow-band dye laser setup. Significant improvements in both photostability and thermo-optical properties of the aqueous CB7-complexed dye systems were observed as compared to the uncomplexed dyes in ethanol solution. The tuning curves for the new dye-CB7-water systems were constructed by measuring the laser output at different wavelengths, which showed similar peak efficiencies and red-shifted gains compared to the ethanolic solutions of the dyes, while dye laser operation revealed comparable pump threshold energies and slope efficiencies. The combined results render the dye-CB7-water system an attractive active medium for high-repetition rate dye laser operation.

Novel approach towards the synthesis of highly efficient flame retardant electrode and oil/organic solvent absorber.

We have developed a facile one pot process to synthesize an ultra-light functionalized spongy graphene (FSG). This is the first approach to use carbon based flame retardant spongy material as an electrode to build completely flame retardant supercapacitor (FRS) also as an oil/organic solvent absorber. The fully FRS concept has created by the compilation of as-prepared FSG with flame retardant separator and electrolyte. As-prepared FSG contained high amount of phosphorus and nitrogen functional groups, which makes it potent flame retardant electrochemical material, to use it as an efficient FR electrode. Flame test of FSG revealed that it doesn't catch fire for ∼1500 s. Also, FSG was able to sustain flame retardancy at a temperature as high as 1500 °C for continuous exposure of ∼300 s. FSG used as an electrode for symmetric capacitor possessing maximum specific capacitance of 494.3 F g-1 at a current density 1 A g-1. Corresponding high energy density and power density values are 55.6 Wh kg-1 and 1799 W kg-1. It shows cycling stability of 86.1% after 5000 cycles at current density of 10 A g-1. The electrochemical property of FSG was also confirmed using three electrode system. Flame retardant FSG material was also used for the absorption and recovery of oil and organic solvents. FSG has high oil and organic solvent sorption capacity in the range of 40-70 g/g, also can be reused for minimum 10 cycles. Such approach has great significance for multifunctional graphene based nanocomposites will open the new window for large-scale applications.

A highly fluorescent turn-on probe in the near-infrared region for albumin quantification in serum matrix.

Developing sensitive and selective near-infrared fluorescent bio-probes for serum albumin detection is an ambitious and highly rewarding task. Herein, we report a styryl based fluorophore for serum albumin detection, which displays an exceptional turn-on emission enhancement of ∼500 fold, the highest reported so far in the near-infrared region, and more importantly enables quantification of albumin in the complex serum matrix.

Supramolecularly Assisted Modulation of Optical Properties of BODIPY-Benzimidazole Conjugates.

Supramolecular host-guest interaction of neutral and cationic (protonated) forms of two boron-dipyromethane (BODIPY)-benzimidazole (mono- and di-benzimidazole) conjugate dyes with the macrocyclic host cucurbit[7]uril (CB7) has been investigated using photophysical and density functional theory studies. Expectedly, cationic forms of the dyes show exceptionally stronger binding than that of the neutral forms with CB7, which can be ascribed to the strong ion-dipole interaction between the positive charge of the dye and the highly polarizable carbonyl portals of the host. The formation of dye-host inclusion complexes is supported by the significant changes in the photophysical properties and longer rotational relaxation times of the dye in the presence of CB7. Job's plot studies indicate the formation of a 1:1 inclusion complex for the mono and a 1:2 inclusion complex for the dibenzimidazole BODIPY dyes. Quantum chemical calculations are in good agreement with the inferences outlined from photophysical measurements. Findings from the studied dye-CB7 systems are of direct relevance to applications such as drug delivery, aqueous dye lasers, sensors, and so on.

Supramolecular interaction of coumarin 1 dye with cucurbit[7]uril as host: combined experimental and theoretical study.

Molecules of the coumarin family have fluorescence characteristics that are highly sensitive to their environment, and thus, they have been used as fluorescent sensors in chemical and biological systems. However, the very poor fluorescence yield of most coumarin dyes in aqueous media limits their applications. We have adopted a supramolecular strategy to improve the fluorescence intensity of coumarin dye through its interaction with the relatively new host cucurbit[7]uril (CB[7]). The virtually nonfluorescent coumarin 1 (Φ(f) = 0.04) was converted into a highly fluorescent (Φ(f) = 0.52) entity in water upon addition of the nonfluorescent host CB[7]. Various spectroscopy techniques, namely, UV-vis absorption and steady-state and time-resolved fluorescence spectroscopies, established the formation of a strong 1:1 dye-CB[7] inclusion complex with a high binding constant of (1.2 ± 0.1) × 10(5) M(-1) for the dye. The stable inclusion complex of the neutral molecule was supported by density-functional-theory- (DFT-) based quantum chemical calculations. Energy decomposition analysis of various interaction factors in the host-guest complex revealed that key components providing stability to the complex were electrostatic, polarization, and charge-transfer energies. These new results on the formation of a strong inclusion complex of the versatile fluorophore coumarin 1 with the nontoxic host CB[7] could lead to the design of efficient molecular-scale biological probes, sensors, and photostable aqueous UV dye lasers.

Design and development of a new pyrromethene dye with improved photostability and lasing efficiency: theoretical rationalization of photophysical and photochemical properties.

In an attempt to develop a photostable and efficient pyrromethene compound for use in liquid dye lasers, three congeners of the commercially available pyrromethene 567 (PM567) laser dye were synthesized and their photophysical properties, lasing efficiencies, and photochemical stabilities were studied. In general the presence of an aryl group at C-8 of the pyrromethene chromophore increased the photostability. One of the congeners possessing a C-8 trimethoxyphenyl moiety showed significantly improved lasing parameters than PM567. Compared to PM567, the photochemical stability of the new dye was 2-fold, while it showed an equivalent lasing efficiency to that of PM567 at a significantly lower concentration. The increased photostability of these new dye molecules could be explained by theoretical calculation on their capacity to generate singlet oxygen ((1)O(2)) and probability of reaction with (1)O(2). Our calculations were in agreement with the experimental results and indicated that a systematic design of new derivatives of pyrromethene chromophore might lead to improved laser dye molecules.