A plasmid toolbox for controlled gene expression across the Proteobacteria.

Controlled gene expression is fundamental for the study of gene function and our ability to engineer bacteria. However, there is currently no easy-to-use genetics toolbox that enables controlled gene expression in a wide range of diverse species. To facilitate the development of genetics systems in a fast, easy, and standardized manner, we constructed and tested a plasmid assembly toolbox that will enable the identification of well-regulated promoters in many Proteobacteria and potentially beyond. Each plasmid is composed of four categories of genetic parts (i) the origin of replication, (ii) resistance marker, (iii) promoter-regulator and (iv) reporter. The plasmids can be efficiently assembled using ligation-independent cloning, and any gene of interest can be easily inserted in place of the reporter. We tested this toolbox in nine different Proteobacteria and identified regulated promoters with over fifty-fold induction range in eight of these bacteria. We also constructed variant libraries that enabled the identification of promoter-regulators with varied expression levels and increased inducible fold change relative to the original promoter. A selection of over 50 plasmids, which contain all of the toolbox's genetic parts, are available for community use and will enable easy construction and testing of genetics systems in both model and non-model bacteria.

Plasmids for Controlled and Tunable High-Level Expression in E. coli.

Controlled gene expression is crucial for engineering bacteria for basic and applied research. Inducible systems enable tight regulation of expression, wherein a small-molecule inducer causes the transcription factor to activate or repress transcriptional initiation. The T7 expression system is one of the most widely used inducible systems, particularly for high overexpression of proteins. However, it is well known that the highly active T7 RNA polymerase (RNAP) has several drawbacks, including toxicity to the host and substantial leaky expression in the absence of an inducer. Much work has been done to address these issues; current solutions require special strains or additional plasmids, making the system more complicated and less accessible. Here, we challenge the assumption that the T7 expression system is the best choice for obtaining high protein titers. We hypothesized that expression from strong inducible promoters expressed from high-copy plasmids could compete with expression levels obtained from T7 RNAP but that such promoters would possess improved control of transcription. Employing inducible systems from a toolbox we developed previously, we demonstrate that our plasmids consistently give higher outputs and greater fold changes over basal expression than the T7 system across rich and minimal media. In addition, we show that they outperformed the T7 system when we used an engineered metabolic pathway to produce lycopene. IMPORTANCE Genetic systems for protein overexpression are required tools in microbiological and biochemical research. Ideally, these systems include standardized genetic parts with predictable behavior, enabling the construction of stable expression systems in the host organism. Modularity of a genetic system is advantageous, so that the expression system can be easily moved into a host that best suits the needs of a given experiment. The T7 expression system lacks both predictability and stability and requires special host strains to function. Despite these limitations, it remains one of the most popular systems for protein overproduction. This study directly compared the T7 system to four inducible systems from our broad-host-range plasmid toolbox and demonstrated these alternative expression systems have distinct advantages over the T7. The systems are entirely plasmid-based and not constrained to a specific bacterial host, expanding the options for high-level protein expression across strains.

A Robust CRISPR Interference Gene Repression System in Pseudomonas.

Pseudomonas spp. are widely used model organisms in different areas of research. Despite the relevance of Pseudomonas in many applications, the use of protein depletion tools in this host remains limited. Here, we developed the CRISPR interference system for gene repression in Pseudomonas spp. using a nuclease-null Streptococcus pasteurianus Cas9 variant (dead Cas9, or dCas9). We demonstrate a robust and titratable gene depletion system with up to 100-fold repression in ß-galactosidase activity in P. aeruginosa and 300-fold repression in pyoverdine production in Pseudomonas putida This inducible system enables the study of essential genes, as shown by ftsZ depletions in P. aeruginosa, P. putida, and Pseudomonas fluorescens that led to phenotypic changes consistent with depletion of the targeted gene. Additionally, we performed the first in vivo characterization of protospacer adjacent motif (PAM) site preferences of S. pasteurianus dCas9 and identified NNGCGA as a functional PAM site that resulted in repression efficiencies comparable to the consensus NNGTGA sequence. This discovery significantly expands the potential genomic targets of S. pasteurianus dCas9, especially in GC-rich organisms.IMPORTANCEPseudomonas spp. are prevalent in a variety of environments, such as the soil, on the surface of plants, and in the human body. Although Pseudomonas spp. are widely used as model organisms in different areas of research, existing tools to deplete a protein of interest in these organisms remain limited. We have developed a robust and inducible gene repression tool in P. aeruginosa, P. putida, and P. fluorescens using the Streptococcus pasteurianus dCas9. This method of protein depletion is superior to existing methods, such as promoter replacements and addition of degradation tags, because it does not involve genomic modifications of the target protein, is titratable, and is capable of repressing multiple genes simultaneously. This gene repression system now enables easy depletion of specific proteins in Pseudomonas, accelerating the study and engineering of this widely used model organism.

CRISPR-Associated Transposase for Targeted Mutagenesis in Diverse Proteobacteria.

Genome editing tools, through the disruption of an organism's native genetic material or the introduction of non-native DNA, facilitate functional investigations to link genotypes to phenotypes. Transposons have been instrumental genetic tools in microbiology, enabling genome-wide, randomized disruption of genes and insertions of new genetic elements. Due to this randomness, identifying and isolating particular transposon mutants (i.e., those with modifications at a genetic locus of interest) can be laborious, often requiring one to sift through hundreds or thousands of mutants. Programmable, site-specific targeting of transposons became possible with recently described CRISPR-associated transposase (CASTs) systems, allowing the streamlined recovery of desired mutants in a single step. Like other CRISPR-derived systems, CASTs can be programmed by guide-RNA that is transcribed from short DNA sequence(s). Here, we describe a CAST system and demonstrate its function in bacteria from three classes of Proteobacteria. A dual plasmid strategy is demonstrated: (i) CAST genes are expressed from a broad-host-range replicative plasmid and (ii) guide-RNA and transposon are encoded on a high-copy, suicidal pUC plasmid. Using our CAST system, single-gene disruptions were performed with on-target efficiencies approaching 100% in Beta- and Gammaproteobacteria (Burkholderia thailandensis and Pseudomonas putida, respectively). We also report a peak efficiency of 45% in the Alphaproteobacterium Agrobacterium fabrum. In B. thailandensis, we performed simultaneous co-integration of transposons at two different target sites, demonstrating CAST's utility in multilocus strategies. The CAST system is also capable of high-efficiency large transposon insertion totaling over 11 kbp in all three bacteria tested. Lastly, the dual plasmid system allowed for iterative transposon mutagenesis in all three bacteria without loss of efficiency. Given these iterative capabilities and large payload capacity, this system will be helpful for genome engineering experiments across several fields of research.

Functional annotation and importance of marine bacterial transporters of plankton exometabolites.

Metabolite exchange within marine microbial communities transfers carbon and other major elements through global cycles and forms the basis of microbial interactions. Yet lack of gene annotations and concern about the quality of existing ones remain major impediments to revealing currencies of carbon flux. We employed an arrayed mutant library of the marine bacterium Ruegeria pomeroyi DSS-3 to experimentally annotate substrates of organic compound transporter systems, using mutant growth and compound drawdown analyses to link transporters to their cognate substrates. Mutant experiments verified substrates for thirteen R. pomeroyi transporters. Four were previously hypothesized based on gene expression data (taurine, glucose/xylose, isethionate, and cadaverine/putrescine/spermidine); five were previously hypothesized based on homology to experimentally annotated transporters in other bacteria (citrate, glycerol, N-acetylglucosamine, fumarate/malate/succinate, and dimethylsulfoniopropionate); and four had no previous annotations (thymidine, carnitine, cysteate, and 3-hydroxybutyrate). These bring the total number of experimentally-verified organic carbon influx transporters to 18 of 126 in the R. pomeroyi genome. In a longitudinal study of a coastal phytoplankton bloom, expression patterns of the experimentally annotated transporters linked them to different stages of the bloom, and also led to the hypothesis that citrate and 3-hydroxybutyrate were among the most highly available bacterial substrates. Improved functional annotation of the gatekeepers of organic carbon uptake is critical for deciphering carbon flux and fate in microbial ecosystems.

Efficient and iterative retron-mediated in vivo recombineering in Escherichia coli.

Recombineering is an important tool in gene editing, enabling fast, precise and highly specific in vivo modification of microbial genomes. Oligonucleotide-mediated recombineering via the in vivo production of single-stranded DNA can overcome the limitations of traditional recombineering methods that rely on the exogenous delivery of editing templates. By modifying a previously reported plasmid-based system for fully in vivo single-stranded DNA recombineering, we demonstrate iterative editing of independent loci by utilizing a temperature-sensitive origin of replication for easy curing of the editing plasmid from recombinant cells. Optimization of the promoters driving the expression of the system's functional components, combined with targeted counterselection against unedited cells with Cas9 nuclease, enabled editing efficiencies of 90-100%. The addition of a dominant-negative mutL allele to the system allowed single-nucleotide edits that were otherwise unachievable due to mismatch repair. Finally, we tested alternative recombinases and found that efficiency significantly increased for some targets. Requiring only a single cloning step for retargeting, our system provides an easy-to-use method for rapid, efficient construction of desired mutants. Graphical Abstract.

Generating Single Nucleotide Point Mutations in E. coli with the No-SCAR System.

Genetic manipulation of microbial genomes is highly relevant for studying biological systems and the development of biotechnologies. In E. coli, λ-Red recombineering is one of the most widely used gene-editing methods, enabling site-specific insertions, deletions, and point mutations of any genomic locus. The no-SCAR system combines λ-Red recombineering with CRISPR/Cas9 for programmable selection of recombinant cells. Recombineering results in the transient production of heteroduplex DNA, as only one strand of DNA is initially altered, leaving the mismatched bases susceptible to repair by the host methyl-directed mismatch repair (MMR) system and reduces the efficiency of generating single nucleotide point mutations. Here we describe a method, where expression of cas9 and the MMR-inhibiting mutLE32K variant are independently controlled by anhydrotetracycline- and cumate-inducible promoters from the pCas9CyMutL plasmid. Thus, MMR is selectively inhibited until recombinant cells have undergone replication and the desired mutation is permanently incorporated. By transiently inhibiting MMR, the accumulation of off-target mutations typically associated with MMR-deficient cell types is minimized. Methods for designing the editing template and sgRNA, cloning of the sgRNA, induction of λ-Red and MutLE32K, the transformation of editing oligo, and induction of Cas9 for mutant selection are detailed within.

GuideMaker: Software to design CRISPR-Cas guide RNA pools in non-model genomes.

BACKGROUND: CRISPR-Cas systems have expanded the possibilities for gene editing in bacteria and eukaryotes. There are many excellent tools for designing CRISPR-Cas guide RNAs (gRNAs) for model organisms with standard Cas enzymes. GuideMaker is intended as a fast and easy-to-use design tool for challenging projects with (i) non-standard Cas enzymes, (ii) non-model organisms, or (iii) projects that need to design a panel of gRNA for genome-wide screens. FINDINGS: GuideMaker can rapidly design gRNAs for gene targets across the genome using a degenerate protospacer-adjacent motif (PAM) and a genome. The tool applies hierarchical navigable small world graphs to speed up the comparison of guide RNAs and optionally provides on-target and off-target scoring. This allows the user to design effective gRNAs targeting all genes in a typical bacterial genome in ∼1-2 minutes. CONCLUSIONS: GuideMaker enables the rapid design of genome-wide gRNA for any CRISPR-Cas enzyme in non-model organisms. While GuideMaker is designed with prokaryotic genomes in mind, it can efficiently process eukaryotic genomes as well. GuideMaker is available as command-line software, a stand-alone web application, and a tool in the CyCverse Discovery Environment. All versions are available under a Creative Commons CC0 1.0 Universal Public Domain Dedication.

Changes in dimethylsulfoniopropionate demethylase gene assemblages in response to an induced phytoplankton bloom.

Over half of the bacterioplankton cells in ocean surface waters are capable of carrying out a demethylation of the phytoplankton metabolite dimethylsulfoniopropionate (DMSP) that routes the sulfur moiety away from the climatically active gas dimethylsulfide (DMS). In this study, we tracked changes in dmdA, the gene responsible for DMSP demethylation, over the course of an induced phytoplankton bloom in Gulf of Mexico seawater microcosms. Analysis of >91,000 amplicon sequences indicated 578 different dmdA sequence clusters at a conservative clustering criterion of ≥90% nucleotide sequence identity over the 6-day study. The representation of the major clades of dmdA, several of which are linked to specific taxa through genomes of cultured marine bacterioplankton, remained fairly constant. However, the representation of clusters within these major clades shifted significantly in response to the bloom, including two Roseobacter-like clusters and a SAR11-like cluster, and the best correlate with shifts of the dominant dmdA clades was chlorophyll a concentration. Concurrent 16S rRNA amplification and sequencing indicated the presence of Roseobacter, SAR11, OM60, and marine Rhodospirillales populations, all of which are known to harbor dmdA genes, although the largest taxonomic change was an increase in Flavobacteriaceae, a group not yet demonstrated to have DMSP-demethylating capabilities. Sequence heterogeneity in dmdA and other functional gene populations is becoming increasingly evident with the advent of high-throughput sequencing technologies, and understanding the ecological implications of this heterogeneity is a major challenge for marine microbial ecology.

Draft Genome Sequences of Actinobacterial and Betaproteobacterial Strains Isolated from the Stratosphere.

Here, we report the genome sequences of three bacterial isolates that were cultured from aerosol samples collected at altitudes of 18 to 29 km above sea level. The isolates tolerate desiccation and shortwave UV radiation and are members of the actinobacterial genera Curtobacterium and Modestobacter and the betaproteobacterial genus Noviherbaspirillum.

A CRISPR Interference System for Efficient and Rapid Gene Knockdown in Caulobacter crescentus.

CRISPR interference (CRISPRi) is a powerful new tool used in different organisms that provides a fast, specific, and reliable way to knock down gene expression. Caulobacter crescentus is a well-studied model bacterium, and although a variety of genetic tools have been developed, it currently takes several weeks to delete or deplete individual genes, which significantly limits genetic studies. Here, we optimized a CRISPRi approach to specifically downregulate the expression of genes in C. crescentus Although the Streptococcus pyogenes CRISPRi system commonly used in other organisms does not work efficiently in Caulobacter, we demonstrate that a catalytically dead version of Cas9 (dCas9) derived from the type II CRISPR3 module of Streptococcus thermophilus or from Streptococcus pasteurianus can each be effectively used in Caulobacter We show that these CRISPRi systems can be used to rapidly and inducibly deplete ctrA or gcrA, two essential well-studied genes in Caulobacter, in either asynchronous or synchronized populations of cells. Additionally, we demonstrate the ability to multiplex CRISPRi-based gene knockdowns, opening new possibilities for systematic genetic interaction studies in CaulobacterIMPORTANCECaulobacter crescentus is a major model organism for understanding cell cycle regulation and cellular asymmetry. The current genetic tools for deleting or silencing the expression of individual genes, particularly those essential for viability, are time-consuming and labor-intensive, which limits global genetic studies. Here, we optimized CRISPR interference (CRISPRi) for use in Caulobacter Using Streptococcus thermophilus CRISPR3 or Streptococcus pasteurianus CRISPR systems, we show that the coexpression of a catalytically dead form of Cas9 (dCas9) with a single guide RNA (sgRNA) containing a seed region that targets the promoter region of a gene of interest efficiently downregulates the expression of the targeted gene. We also demonstrate that multiple sgRNAs can be produced in parallel to enable the facile silencing of multiple genes, opening the door to systematic genetic interaction studies. In sum, our work now provides a rapid, specific, and powerful new tool for silencing gene expression in C. crescentus and possibly other alphaproteobacteria.

Potential for Applying Continuous Directed Evolution to Plant Enzymes: An Exploratory Study.

Plant evolution has produced enzymes that may not be optimal for maximizing yield and quality in today's agricultural environments and plant biotechnology applications. By improving enzyme performance, it should be possible to alleviate constraints on yield and quality currently imposed by kinetic properties or enzyme instability. Enzymes can be optimized more quickly than naturally possible by applying directed evolution, which entails mutating a target gene in vitro and screening or selecting the mutated gene products for the desired characteristics. Continuous directed evolution is a more efficient and scalable version that accomplishes the mutagenesis and selection steps simultaneously in vivo via error-prone replication of the target gene and coupling of the host cell's growth rate to the target gene's function. However, published continuous systems require custom plasmid assembly, and convenient multipurpose platforms are not available. We discuss two systems suitable for continuous directed evolution of enzymes, OrthoRep in Saccharomyces cerevisiae and EvolvR in Escherichia coli, and our pilot efforts to adapt each system for high-throughput plant enzyme engineering. To test our modified systems, we used the thiamin synthesis enzyme THI4, previously identified as a prime candidate for improvement. Our adapted OrthoRep system shows promise for efficient plant enzyme engineering.

Assay and Analysis of Dimethylsulfoniopropionate Demethylase.

Dimethylsulfoniopropionate (DMSP) demethylase is a tetrahydrofolate-dependent enzyme that initiates the DMSP demethylation pathway in marine bacteria. This enzyme is important for understanding of organic sulfur flux from the oceans because it directs the sulfur from DMSP away from dimethylsulfide. This enzyme has been purified and characterized from two marine bacteria from different ecological niches. Both enzymes were confirmed to catalyze the tetrahydrofolate-dependent demethylation of DMSP and possessed similar properties. In this chapter a description of the steps for performing enzyme assays and measuring enzyme activity is provided.

Scarless Cas9 Assisted Recombineering (no-SCAR) in Escherichia coli, an Easy-to-Use System for Genome Editing.

The discovery and development of genome editing systems that leverage the site-specific DNA endonuclease system CRISPR/Cas9 has fundamentally changed the ease and speed of genome editing in many organisms. In eukaryotes, the CRISPR/Cas9 system utilizes a "guide" RNA to enable the Cas9 nuclease to make a double-strand break at a particular genome locus, which is repaired by non-homologous end joining (NHEJ) repair enzymes, often generating random mutations in the process. A specific alteration of the target genome can also be generated by supplying a DNA template in vivo with a desired mutation, which is incorporated by homology-directed repair. However, E. coli lacks robust systems for double-strand break repair. Thus, in contrast to eukaryotes, targeting E. coli chromosomal DNA with Cas9 causes cell death. However, Cas9-mediated killing of bacteria can be exploited to select against cells with a specified genotype within a mixed population. In combination with the well described λ-Red system for recombination in E. coli, we created a highly efficient system for marker-free and scarless genome editing. © 2017 by John Wiley & Sons, Inc.

Dynamic regulation of metabolic flux in engineered bacteria using a pathway-independent quorum-sensing circuit.

Metabolic engineering of microorganisms to produce desirable products on an industrial scale can result in unbalanced cellular metabolic networks that reduce productivity and yield. Metabolic fluxes can be rebalanced using dynamic pathway regulation, but few broadly applicable tools are available to achieve this. We present a pathway-independent genetic control module that can be used to dynamically regulate the expression of target genes. We apply our module to identify the optimal point to redirect glycolytic flux into heterologous engineered pathways in Escherichia coli, resulting in titers of myo-inositol increased 5.5-fold and titers of glucaric acid increased from unmeasurable to >0.8 g/L, compared to the parent strains lacking dynamic flux control. Scaled-up production of these strains in benchtop bioreactors resulted in almost ten- and fivefold increases in specific titers of myo-inositol and glucaric acid, respectively. We also used our module to control flux into aromatic amino acid biosynthesis to increase titers of shikimate in E. coli from unmeasurable to >100 mg/L.

A platform pathway for production of 3-hydroxyacids provides a biosynthetic route to 3-hydroxy-γ-butyrolactone.

The replacement of petroleum feedstocks with biomass to produce platform chemicals requires the development of appropriate conversion technologies. 3-Hydroxy-γ-butyrolactone has been identified as one such chemical; however, there are no naturally occurring biosynthetic pathways for this molecule or its hydrolyzed form, 3,4-dihydroxybutyric acid. Here we design a novel pathway to produce various chiral 3-hydroxyacids, including 3,4-dihydroxybutyric acid, consisting of enzymes that condense two acyl-CoAs, stereospecifically reduce the resulting ß-ketone and hydrolyze the CoA thioester to release the free acid. Acetyl-CoA serves as one substrate for the condensation reaction, whereas the second is produced intracellularly by a pathway enzyme that converts exogenously supplied organic acids. Feeding of butyrate, isobutyrate and glycolate results in the production of 3-hydroxyhexanoate, 3-hydroxy-4-methylvalerate and 3,4-dihydroxybutyric acid+3-hydroxy-γ-butyrolactone, respectively, molecules with potential uses in applications from materials to medicines. We also unexpectedly observe the condensation reaction resulting in the production of the 2,3-dihydroxybutyric acid isomer, a potential value-added monomer.