Crystal structure of the trigonal form of isotactic polypropylene as an example of density-driven polymer structure.

Propene-hexene copolymers crystallize in a new polymorphic form of isotactic polypropylene when the concentration of hexene is higher than nearly 10-15 mol %. The hexene units are included in the crystals, inducing an increase of density that allows crystallization of 3-fold helical chains in a trigonal unit cell according to the space group R3c or Rc, where the helical symmetry of the chains is maintained in the crystal lattice. The structure of this new form is similar to those of isotactic polybutene and polystyrene and does not crystallize in polypropylene homopolymer because it would have too low density. The crystal structure of isotactic polypropylene is therefore no longer an exception to the principles of polymer crystallography, but the new structure represents the fulfillment of these principles and indicates that the packing of polymer molecules is mainly driven by density.

Synthesis and reactivity of N-heterocycle-B(C6F5)3 complexes. 4. Competition between pyridine- and pyrrole-type substrates toward B(C6F5)3: structure and dynamics of 7-B(C6F5)3-7-azaindole and [7-Azaindolium]+[HOB(C6F5)3]-.

Reaction between 7-azaindole and B(C6F5)3 quantitatively yields 7-(C6F5)3B-7-azaindole (4), in which B(C6F5)3 coordinates to the pyridine nitrogen of 7-azaindole, leaving the pyrrole ring unreacted even in the presence of a second equivalent of B(C6F5)3. Reaction of 7-azaindole with H2O-B(C6F5)3 initially produces [7-azaindolium]+[HOB(C6F5)3]- (5) which slowly converts to 4 releasing a H2O molecule. Pyridine removes the borane from the known complexes (C6F5)3B-pyrrole (1) and (C6F5)3B-indole (2), with formation of free pyrrole or indole, giving the more stable adduct (C6F5)3B-pyridine (3). The competition between pyridine and 7-azaindole for the coordination with B(C6F5)3 again yields 3. The molecular structures of compounds 4 and 5 have been determined both in the solid state and in solution and compared to the structures of other (C6F5)3B-N-heterocycle complexes. Two dynamic processes have been found in compound 4. Their activation parameters (DeltaH = 66 (3) kJ/mol, DeltaS = -18 (10) J/mol K and DeltaH = 76 (5) kJ/mol, DeltaS = -5 (18) J/mol K) are comparable with those of other (C6F5)3B-based adducts. The nature of the intramolecular interactions that result in such energetic barriers is discussed.

Oxygen-bridged borate anions from tris(pentafluorophenyl)borane: synthesis, NMR characterization, and reactivity.

The previously known anion [(C6F5)3B(mu-OH)B(C6F5)3]- (2) has been prepared by a two-step procedure, involving deprotonation of (C6F5)3BOH2 to give [B(C6F5)3OH]- (1), followed by addition of B(C6F5)3. The solution structure and the dynamics of 2 have been investigated by 1H and 19F NMR spectroscopy. The reaction of [NHEt3]2 with NEt3 resulted in the formation of [NHEt3]+ [(C6F5)3BOH]-, [NHEt3]+ [(C6F5)3BH]-, and (C6F5)3B- (CH2CH=N+ Et2). This indicates that in the presence of a nucleophile anion 2 can dissociate to B(C6F5)3 and 1. The reaction of [HDMAN]2 with 1,8-bis(dimethylamino)naphthalene (DMAN) confirmed this trend. In the presence of water, 2 transformed into the adduct [(C6F5)3BO(H)H...O(H)B(C6F5)3]- (3), containing the borate 1 hydrogen-bonded to a water molecule coordinated to B(C6F5)3. The same compound is formed by treating (C6F5)3BOH2 with 0.5 equiv of a base. A competition study established that for 1 the Lewis acid-base interaction with B(C6F5)3 is about 5 times preferred over H-bonding to (C6F5)3BOH2. The X-ray single-crystal analysis of [2-methyl-3H-indolium]3 provided the first experimental observation of an asymmetric H-bond in the [H3O2]- moiety, the measured O-H and H...O bond distances being significantly different [1.14(2) vs 1.26(2) A]. The reaction of NEt3 with an equimolar mixture of B(C6F5)3 and bis(pentafluorophenyl)borinic acid, (C6F5)2BOH, afforded the novel borinatoborate salt [NHEt3]+ [(C6F5)3BOB(C6F5)2]- ([NHEt3]4). X-ray diffraction showed that the B-O bond distances are significantly shorter than in [(C6F5)3B(mu-OH)B(C6F5)3]-. Variable-temperature 19F NMR revealed high mobility of the five aryl rings, at variance with the more crowded anion 2. 2D NMR correlation experiments showed that in CD2Cl2 the two anions [(C6F5)3BOH]- and [(C6F5)3BH]- form tight ion pairs with [NHEt3]+, in which the NH proton establishes a conventional (BO...HN) or an unconventional (BH...HN), respectively, hydrogen bond with the anion. The diborate anions 2-4, on the contrary, gave loose ion pairs with the ammonium cation, due both to the delocalized anionic charge and to the more sterically encumbered position of the oxygen atoms that should act as H-bond acceptors.

Synthesis and characterization of high-molecular-weight syndiotactic amorphous polypropylene.

Heterocycle-fused titanium indenyl silylamido dimethyl complexes produce very high molecular weight polypropylene having a prevailingly syndiotactic microstructure with syndiotactic pentad contents rrrr up to 40-55% (sam-PP). The samples are basically amorphous and may slowly develop a low level of crystallinity (16-20%) at room temperature. A structural characterization has shown that sam-PP samples crystallize in disordered modifications of the helical form I of syndiotactic polypropylene (s-PP). The stretching of compression-molded films of sam-PP samples produce oriented crystalline fibers in the trans-planar mesomorphic form of s-PP. The low stereoregularity prevents the formation of the ordered trans-planar form III of s-PP, which instead is obtained in stretched fibers of the highly stereoregular and crystalline s-PP. The trans-planar mesomorphic form, obtained in stretched fibers, in turn transforms into the helical form I upon releasing the tension. The analysis of the mechanical properties has shown that sam-PP samples show good elastic behavior in a large range of deformation with remarkable strength, due to the presence of crystallinity. A comparison with the mechanical properties of less syndiotactic and fully amorphous samples is reported. These fully amorphous samples present lower strength and experience rapid viscous flow of the chains at high deformations and/or by application of stresses for long times. The higher strength in the semicrystalline sam-PP samples makes these materials interesting thermoplastic elastomers showing high toughness and ductility.

Structure-property correlations in polypropylene from metallocene catalysts: stereodefective, regioregular isotactic polypropylene.

A series of MAO-activated C(1)-symmetric indenyl-ansa-dithienocyclopentadienyl-based zirconocenes have been used to produce isotactic polypropylenes of medium to high molecular weights, of different degrees of stereoregularity, and free from regioerrors. The effect of the presence of rr defects on the polymorphic behavior and mechanical properties of polypropylene is analyzed. The presence of rr defects induces crystallization of gamma form and of disordered modifications intermediate between alpha and gamma forms. A linear relationship between the amount of gamma form and the average length of isotactic sequences has been found. Samples with low concentration of rr defects, up to 3-4%, present high melting temperatures, in the range 160-130 degrees C, and behave as stiff-plastic materials; sample with higher rr content, in the range 4-6% and melting temperatures around 115-120 degrees C are highly flexible thermoplastic materials, and, finally, samples with concentration of rr defects in the range 7-11% and melting temperatures in the range 80-110 degrees C are thermoplastic elastomers with high strength. The fine-tuning of the chain microstructure, achieved by a tailored design of new metallocene catalysts, has allowed production of new polypropylenes having desired properties, intermediate between those of stiff plastic and elastomeric materials.

Synthesis and reactivity of (C6F5)3B-N-heterocycle complexes. 1. Generation of highly acidic sp3 carbons in pyrroles and indoles.

The reaction of pyrroles and indoles with B(C(6)F(5))(3) and BCl(3) produces 1:1 B-N complexes containing highly acidic sp(3) carbons, for example, N-[tris(pentafluorophenyl)borane]-5H-pyrrole (1) and N-[tris(pentafluorophenyl)borane]-3H-indole (2), that are formed by a new formal N-to-C hydrogen shift, the mechanism of which is discussed. With some derivatives, restricted rotation around the B-N bond and/or the B-C bonds was observed by NMR techniques, and some rotational barriers were calculated from experimental data. The acidity of the sp(3) carbons in these complexes is shown by their ability to protonate NEt(3), with formation of pyrrolyl- and indolyl-borate ammonium salts. The driving force for this reaction is given by the restoration of the aromaticity of the heterocycle.