Biaxial Strain Transfer in Supported Graphene.

Understanding the mechanism and limits of strain transfer between supported 2D systems and their substrate is a most needed step toward the development of strain engineering at the nanoscale. This includes applications in straintronics, nanoelectromechanical devices, or new nanocomposites. Here, we have studied the limits of biaxial compressive strain transfer among SiO2, diamond, and sapphire substrates and graphene. Using high pressure-which allows maximizing the adhesion between graphene and the substrate on which it is deposited-we show that the relevant parameter governing the graphene mechanical response is not the applied pressure but rather the strain that is transmitted from the substrate. Under these experimental conditions, we also show the existence of a critical biaxial stress beyond which strain transfer become partial and introduce a parameter, α, to characterize strain transfer efficiency. The critical stress and α appear to be dependent on the nature of the substrate. Under ideal biaxial strain transfer conditions, the phonon Raman G-band dependence with strain appears to be linear with a slope of -60 ± 3 cm-1/% down to biaxial strains of -0.9%. This evolution appears to be general for both biaxial compression and tension for different experimental setups, at least in the biaxial strain range -0.9% < ε < 1.8%, thus providing a criterion to validate total biaxial strain transfer hypotheses. These results invite us to cast a new look at mechanical strain experiments on deposited graphene as well as to other 2D layered materials.

Clinical significance of cross-reactivity between tobacco and latex.

BACKGROUND: Allergen cross-reactivity between tobacco and other species of Solanaceae family (tomato, potato, aubergine and egg plant) have been reported. We have recently studied IgE response to tobacco in asthmatic patients sensitised to Lolium perenne (Perennial rye grass pollen) and have found that 30% of the tobacco responsive patients also have latex sensitisation. OBJECTIVE: The aim of our study was to investigate the possibility of cross-reactivity between tobacco and latex in asthmatic patients with IgE response to latex. METHODS: A study was performed on tobacco and latex exposure in 15 patients who suffered from asthma and latex sensitisation and who were randomly chosen from our database of latex-sensitive patients. To identify tobacco and latex as possible allergens that might cause clinical specific responses, all these patients were tested with prick-tests, specific IgE to tobacco, latex and related allergens, bronchial challenge, and patch tests with tobacco, latex and nicotine. Immunological response was evaluated with immunoblotting, immunoblotting-inhibition and EAST-inhibition tests. RESULTS: Positive prick and bronchial challenge with specific IgE>0.35 kU/L to tobacco was demonstrated in 11 asthmatics who were also sensitised to rye grass. Tobacco IgE level was related with sensitisation to latex (p<0.002), but not to other vegetables belonging to the Solanaceae family. EAST-inhibition and immunoblotting-inhibition showed the existence of cross-reactivity between tobacco and latex. CONCLUSIONS: Cross-reactivity exists between latex and tobacco allergens. Smoker patients with IgE response to tobacco may be a risk population for latex sensitisation.

Adaptive geometric numerical integration for point vortex dynamics.

In this paper we describe a variable stepsize integration method for the Hamiltonian dynamics of point vortices based on the explicit symplectic Zhang and Qin scheme. The adapted method is also explicit and preserves the reversible structure of the flow. In order to check the behavior of this adaptive method a numerical study of the exchange-scattering phenomenon in the three-vortex problem is made. The symmetry of the orbit and the energy evolution are discussed for the exchange-scattering model. A long-term integration of this and other models composed also of three vortices indicates that the adaptive Zhang-Qin method has good properties of efficiency and preservation of the first integrals associated with point vortex systems.

Metabolic effects in rats of verapamil alone and in combination with captopril.

The metabolic effects of verapamil alone and in combination with captopril were investigated in rats. Animals received the maximum recommended doses for humans (per kg body weight per day) over a 2-week period. Verapamil had no significant effects on serum biochemistry, but caused a significant increase in serum potassium level and significant reductions in the rates of intestinal absorption of glucose and calcium. Verapamil/captopril had a number of significant effects on serum lipid profile (increased total cholesterol, increased HDL-cholesterol, and reduced LDL-cholesterol), and also provoked an increase in serum alanine amino-transferase activity and in serum glucose levels. The combination treatment caused a significant increase in serum chloride levels, but had no effect on intestinal absorption.

[Genotypes of hepatitis C virus: their relationship with risk factors, the severity of liver disease, and the serologic response]. / Genotipos del virus de la hepatitis C: relación con los factores de riesgo, con la gravedad de la enfermedad hepática y con la respuesta serológica.

BACKGROUND: The objective of our study was to ascertain the prevalence of different HCV genotypes between the hepatitis C patients in the health area of Monforte de Lemos, Spain, as well as the possible influence of risk factors on their distribution and their relation with hepatic disease and with the serologic response. PATIENTS AND METHODS: We have studied 128 patients with hepatitis C. Of these, 41 were intravenous drug users (IVDU), 19 had received transfusions, 7 were hemodialyzed and in 61 the risk factors were unknown. Antibodies against HCV were detected by second-generation enzyme immunoassay (EIA) and confirmed by immunoblot. RNA-HCV presence was studied by reverse transcription-PCR (RT-PCR), and a reverse hybridization test of the amplifications was used for the genotyping. RESULTS: Hepatitis C genotypes 1b (46.1 [8.6%]), 1a (23.4 [7.3%]) and 3a (13.3 [5.9%]) were the most frequently encountered genotype. Genotype 1a (48.8 [15.3%]) was the most prevalent genotypes in IVDU patients, while 1b was the most frequent in patients of unknown risk factors (62.3 [12.1%]). Alanine-aminotransferase (ALT) was elevated in 66.6 (17.7%) of patients with genotype 1a, in 87.5 (8.6%) of patients with genotype 1b (p = 0.0367) and in 94.1 (11.2%) of patients with genotype 3a (p = 0.0347). Subtype 1b was present in 6 of 7 cases of cirrhosis (85.7%) and in 7 of 12 cases of active chronic hepatitis (58.3%). No significant statistical differences were observed between the genotypes and the specific IgM response against core antigen of HCV, neither we observed differences in the serologic response against C1, C2, NS3 and NS4 peptides. CONCLUSIONS: Hepatitis C genotypes 1a and 3a were the most prevalent genotypes between IVDU patients while genotype 1b was the most frequent between non-IVDU patients. Genotype 1b was associated to severe liver disease. Percentage of positivity or the reactivity against HCV peptides was independent of the genotype encountered in the patient.

[Mediastinal tuberculosis as a cause of fever of unknown origin]. / Tuberculosis mediastínica como causa de fiebre de origen desconocido.

Tuberculosis is the most frequent cause of fever from unknown etiology. On the other hand, mediastinal tuberculous adenopathy (TBM), without associated pulmonary affection is a rare form of presentation among adults, generally evolving with sustained fever until a thoracic radiology is performed showing mediastinal enlargement. We present a case which started as fever from unknown etiology (FUE), given that, according to the thoracic radiology performed one month after the onset of fever, no mediastinal affection was observed.

High pressure study of Li-doped fullerides, Li(x)C60 (x = 4,12), by x-ray diffraction and Raman spectroscopy.

In this article we study the alkali metal-intercalated 2D polymeric Li4C60 and the monomeric Li12C60 under pressure up to 40 GPa at room temperature, using x-ray diffraction and Raman spectroscopy. Li4C60 undergoes several transitions in the studied pressure range. At pressures lower than 8 GPa, we observed changes in both diffraction patterns and Raman scattering spectra, probably due to the displacement of Li atoms. At 8 GPa another structural and electronic transition occurs. We observe an enhancement of background and a broadening of diffraction peaks. Raman modes weaken and broaden considerably. An important structural transition occurs at around 16 GPa, in which new Raman bands exhibit features similar to those of a reported 3D C60 polymeric structure. The XRD data shows a collapse in volume with the simultaneous formation of amorphous material. The cell parameters deviate from their early pressure evolution and become less compressible. The high pressure study of highly doped monomeric Li12C60 shows that its structural integrity is retained up to 13 GPa, with increasing pressure-induced structural distortion and disorder. Above 13 GPa, Li12C60 transforms to a highly disordered state.

A first-principles study of the effect of charge doping on the 1D polymerization of C(60).

We study the interplay between charge doping and intermolecular distance in the polymerization of C(60) fullerene chains by means of density functional theory-based first-principles calculations. The potential energy surface analysis shows that both the equilibrium intermolecular distance of the unpolymerized system and the polymerization energy barrier are inversely proportional to the electron doping of the system. We analyze the origin of this charge-induced polymerization effect by studying the behavior of the system's wavefunctions around the Fermi level and the structural modifications of the molecules as a function of two variables: the distance between the centers of the molecules and the number of electrons added to the system.

Enfermedad celíaca, esofagitis eosinofílica y alergia a cereales: ¿existe alguna conexión? Importancia de los estudios moleculares para su tipificación / Celiac disease, eosinophilic esophagitis and cereal allergies: Is there a connection? Importance of molecular studies for patients classification

No disponible

New phase transition of solid bromine under high pressure.

Solid bromine has been studied by x-ray absorption spectroscopy experiments up to a maximum pressure of 75 GPa. The data analysis of the extended fine structure reveals that the intramolecular distance first increases, reaching its maximum value at 25+/-5 GPa. From this value the intramolecular distance abruptly begins to decrease evidencing a nonpreviously observed phase transformation taking place at 25+/-5 GPa. A maximum variation of 0.08 A is observed at 65+/-5 GPa where again a phase transition occurs. This last transformation could correspond with the recently observed change to an incommensurate modulated phase. We discuss the possible generalization of the observed new phase transition at 25+/-5 GPa to the case of the other halogens.

[Specifications on the lecithin/sphingomyelin ratio (L/S). Updated review]. / Matizaciones sobre el cociente lecitina esfingomielina (L/E). Revisión actualizada.

We review the lecithin/sphingomyelin ratio (L/E) studying the amniotic fluid to value the fetal lung maturity. We compare him with others biological parameters. We consider the modifications arising across pregnancy and in different diseases as well as the factors influencing its results.

Exceptional ideal strength of carbon clathrates.

We study by means of ab initio calculations the ideal tensile and shear strengths of the C-46 clathrate phase. While its bulk modulus and elastic constants are smaller than in diamond, its strength is found to be in all directions larger than the critical stresses associated with the diamond [111] planes of easy slip. This can be related to the frustration by the clathrate cage structure of the diamond to graphite instability under nonhydrostatic stress conditions [corrected] The criteria for designing strong materials are discussed.

High-focusing Bragg-Crystal polychromator design for energy-dispersive X-ray absorption spectroscopy.

The design of a highly focusing profiled Si(111) Bragg crystal polychromator for dispersive EXAFS (extended X-ray absorption fine structure) experiments is described. The contour of the crystal has been optimized to give the best focus over the full 4-13 keV energy range. The profile optimization has been improved taking into account all the degrees of freedom of the geometry and the results of X-ray tracing simulations. The profile of the crystal has been calculated to take full advantage of the new possibilities given by the undulator source and the optics of beamline ID24 at the European Synchrotron Radiation Facility. Full spot sizes have been measured to be between 20 and 40 microm in the 5-12 keV energy range. These values compare well with X-ray tracing simulations and are the smallest spots ever obtained with energy-dispersive EXAFS optics, keeping, however, a wide enough energy bandpass for most X-ray absorption spectroscopy experiments.

Metabolic effects of the combination of furosemide and captopril in rat.

Diuretics typically provoke increased serum lipid levels and may provoke increased serum uric acid levels and/or glucose intolerance. Furosemide is widely used as an antihypertensive, but in patients for whom furosemide treatment alone proves insufficient to reduce hypertension, a common procedure is to co-administer the angiotensin-converting-enzyme (ACE) inhibitor captopril. The metabolic effects in rats of joint administration of furosemide (15 mg/kg/day) and captopril (2 mg/kg/day) are evaluated over a two-week period. At the end of this period, the serum levels of lipids, uric acid, bilirubin, proteins and various enzymes were determined as well as the effect of the treatment on intestinal absorption of glucose and calcium. Furosemide/captopril led to an increase in serum albumin and alkaline phosphatase levels, and a decrease in triglyceride levels. The results of this work support the view that this drug combination is suitable for hypertension treatment.

Clinical evaluation of a commercial ligase-based gene amplification method for detection of Mycobacterium tuberculosis.

The purpose of this study was to evaluate the clinical usefulness of a commercial ligase-based gene amplification method (LCx Mycobacterium tuberculosis test; Abbott Laboratories, USA) for detection of Mycobacterium tuberculosis. The tuberculosis infection rate among clinical samples was 10.6%. The sensitivity, specificity, and positive and negative predictive values were 23.5%, 100%, 100%, and 91.7%, respectively, with the fluorochrome auramine stain; 32.4%, 100%, 100%, and 92.6%, respectively, with culture; and 76.5%, 95.8%, 68.4% and 97.2%, respectively, with the gene amplification method. When only samples from patients without current or previous treatment were studied, the sensitivity was 36.4% with the auramine stain, 63.6% with culture, and 100% with the gene amplification assay. The mean treatment time for culture-negative and assay-negative samples was greater than that of culture-negative and assay-positive samples. The LCx Mycobacterium tuberculosis test is a sensitive method for detection and identification of Mycobacterium tuberculosis. It produces few false-positive results. However, as it can remain positive after the culture becomes negative, it is not recommended for evaluation of treatment efficiency.