Hybrid air-bulk multi-pass cell compressor for high pulse energies with full spatio-temporal characterization.

Multi-pass cell (MPC) compressors have proven to be the method of choice for compression of high average power long-pulse Yb lasers. Yet, generating sub-30 fs pulses at high pulse energy with compact and simple components remains a challenge. This work demonstrates an efficient and cost-effective approach for nonlinear pulse compression at high pulse energy using a hybrid air-bulk MPC. By carefully balancing the relative nonlinear contributions of ambient air and fused silica, we achieve strong spectral broadening without dispersion engineering or pressure-control inside the cell at 400-µJ pulse energy. In this way, we compress pulses from 220 fs to 27 fs at 40.3 W of average power (100 kHz repetition rate), enhancing the peak power from 1.6 GW to 10.2 GW while maintaining 78% of the energy within the main pulse. Our approach combines the strengths of gas-filled and bulk compression schemes and exhibits excellent overall optical transmission (91%) and spectral uniformity. Moreover, we utilize the INSIGHT technique to investigate spatio-temporal couplings and geometrical aberrations of the compressed pulse. Our results demonstrate remarkable temporal homogeneity, with an average Strehl ratio of 0.97 consistently observed throughout the entire spectral profile. Additionally, all spectrally-integrated Zernike coefficients for geometrical aberrations maintain values below 0.02λ.

Single-cycle, 643†mW average power terahertz source based on tilted pulse front in lithium niobate.

We present the highest, to the best of our knowledge, average power from a laser-driven single-cycle THz source demonstrated so far, using optical rectification in the tilted pulse front geometry in cryogenically cooled lithium niobate, pumped by a commercially available 500 W ultrafast thin-disk ytterbium (Yb) amplifier. We study repetition rate-dependent effects in our setup at 100 and 40 kHz at this high average power, revealing different optimal fluence conditions for efficient conversion. The demonstrated sources with multi-100 mW average power at these high repetition rates combine high THz pulse energies and high repetition rate and are thus ideally suited for nonlinear THz spectroscopy experiments with significantly reduced measurement times. The presented result is a first benchmark for high average power THz time-domain spectroscopy systems for nonlinear spectroscopy, driven by very high average power ultrafast Yb lasers.

GHz repetition rate, sub-100-fs Ho:CALGO laser at 2.1†µm with watt-level average power.

We report on a GHz fundamental repetition rate Kerr-lens mode-locked Ho:CALGO laser emitting at 2.1 µm. The laser employs a ring cavity to increase the fundamental repetition rate to 1.179 GHz and can be made to oscillate in both directions stably with nearly identical performance: for the counterclockwise oscillation, it generates 93-fs pulses at 1.68 W of average power, whereas 92 fs and 1.69 W were measured for the clockwise operation. Our current results represent the highest average power from a 2-µm GHz oscillator and, to our knowledge, the first sub-100-fs pulse duration from a Ho-based oscillator.