Investigating the interactive effects of habitat type and light intensity on rocky shores.

Light availability and habitat complexity are two key drivers of community assembly. Urbanisation has been shown to affect both, with important consequences to ecological communities. On the intertidal, for instance, studies have shown that light intensity is greater on natural rocky shores than on less complex artificial habitats (seawalls), though different habitats can also experience similar light intensities, for example when shaded by urban structures. Understanding therefore how these factors individually, and combined, affect communities is important to understand the mechanisms driving changes in community structure, and consequently provide solutions to tackle the increasing homogenisation of habitats and lightscapes in urbanised spaces through smart infrastructure designs. Here, we assessed how different light levels affect the recruitment of communities in rock pools and on emergent rock on an intertidal rocky shore. We cleared 30 patches of emergent rock and 30 rock pools and manipulated light using shades with different light transmissions (full light, procedural control, 75%, 35%, and 15% light transmission, full shade) and assessed mobile and sessile communities monthly for 6 months. Effects of reducing light levels were generally stronger on rock than in pools. Fully shaded plots supported double the amount of mobile organisms than plots in full sunlight, in both habitats. Algal cover was higher in pools compared to rock, and at intermediate light levels, but effects varied with site. This study highlights the importance of variable light conditions and different habitats for rocky shore communities, which should be considered in future coastal developments to retain natural biodiversity.

Variable effects of substrate colour and microtexture on sessile marine taxa in Australian estuaries.

Concrete infrastructure in coastal waters is increasing. While adding complex habitat and manipulating concrete mixtures to enhance biodiversity have been studied, field investigations of sub-millimetre-scale complexity and substrate colour are lacking. Here, the interacting effects of 'colour' (white, grey, black) and 'microtexture' (smooth, 0.5 mm texture) on colonisation were assessed at three sites in Australia. In Townsville, no effects of colour or microtexture were observed. In Sydney, spirorbid polychaetes occupied more space on smooth than textured tiles, but there was no effect of microtexture on serpulid polychaetes, bryozoans and algae. In Melbourne, barnacles were more abundant on black than white tiles, while serpulid polychaetes showed opposite patterns and ascidians did not vary with treatments. These results suggest that microtexture and colour can facilitate colonisation of some taxa. The context-dependency of the results shows that inclusion of these factors into marine infrastructure designs needs to be carefully considered.

Facilitation of non-indigenous ascidian by marine eco-engineering interventions at an urban site.

Marine artificial structures often support lower native species diversity and more non-indigenous species (NIS), but adding complex habitat and using bioreceptive materials have the potential to mitigate these impacts. Here, the interacting effects of structural complexity (flat, complex with pits) and concrete mixture (standard, or with oyster shell or vermiculite aggregate) on recruitment were assessed at two intertidal levels at an urban site. Complex tiles had less green algal cover, oyster shell mixtures had less brown (Ralfsia sp.) algal cover. At a low tidal elevation, the non-indigenous ascidian Styela plicata dominated complex tiles. Additionally, mixtures with oyster shell supported higher total cover of sessile species, and a higher cover of S. plicata. There were no effects of complexity or mixture on biofilm communities and native and NIS richness. Overall, these results suggest that habitat complexity and some bioreceptive materials may facilitate colonisation by a dominant invertebrate invader on artificial structures.

Material type influences the abundance but not richness of colonising organisms on marine structures.

Urbanisation of coastal areas and growth in the blue economy drive the proliferation of artificial structures in marine environments. These structures support distinct ecological communities compared to natural hard substrates, potentially reflecting differences in the materials from which they are constructed. We undertook a meta-analysis of 46 studies to compare the effects of different material types (natural or eco-friendly vs. artificial) on the colonising biota on built structures. Neither the abundance nor richness of colonists displayed consistent patterns of difference between artificial and natural substrates or between eco-friendly and standard concrete. Instead, there were differences in the abundance of organisms (but not richness) between artificial and natural materials, that varied according to material type and by functional group. When compared to biogenic materials and rock, polymer and metal supported significantly lower abundances of total benthic species (in studies assessing sessile and mobile species together), sessile invertebrates and corals (in studies assessing these groups individually). In contrast, non-indigenous species were significantly more abundant on wood than metal. Concrete supported greater abundances of the general community, including habitat-forming species, compared to wood. Our results suggest that the ecological requirements of the biological community, alongside economic, logistic and engineering factors should be considered in material selection for multifunctional marine structures that deliver both engineering and ecological (enhanced abundance and diversity) benefits.

Predicting the impact of sea-level rise on intertidal rocky shores with remote sensing.

Sea-level rise is an inevitable consequence of climate change and threatens coastal ecosystems, particularly intertidal habitats that are constrained by landward development. Intertidal habitats support significant biodiversity, but also provide natural buffers from climate-threats such as increased storm events. Predicting the effects of climate scenarios on coastal ecosystems is important for understanding both the degree of habitat loss for associated ecological communities and the risk of the loss of coastal buffer zones. We take a novel approach by combining remote sensing with the IUCN Red List of Ecosystem criteria to assess this impact. We quantified the extent of horizontal intertidal rocky shores along ~200 km of coastline in Eastern Australia using GIS and remote-sensing (LiDAR) and used this information to predict changes in extent under four different climate change driven sea-level rise scenarios. We then applied the IUCN Red List of Ecosystems Criterion C2 (habitat degradation over the next 50 years based on change in an abiotic variable) to estimate the status of this ecosystem using the Hawkesbury Shelf Marine Bioregion as a test coastline. We also used four individual rocky shores as case studies to investigate the role of local topography in determining the severity of sea-level rise impacts. We found that, if the habitat loss within the study area is representative of the entire bioregion, the IUCN status of this ecosystem is 'near threatened', assuming that an assessment of the other criteria would return lower categories of risk. There was, however, high spatial variability in this effect. Rocky shores with gentle slopes had the highest projected losses of area whereas rocky shores expanding above the current intertidal range were less affected. Among the sites surveyed in detail, the ecosystem status ranged from 'least concern' to 'vulnerable', but reached 'endangered' under upper estimates of the most severe scenario. Our results have important implications for conservation management, highlighting a new link between remote sensing and the IUCN Red List of Ecosystem criteria that can be applied worldwide to assess ecosystem risk to sea-level rise.

Influence of habitat features on the colonisation of native and non-indigenous species.

Marine artificial structures provide substrates on which organisms can settle and grow. These structures facilitate establishment and spread of non-indigenous species, in part due to their distinct physical features (substrate material, movement, orientation) compared to natural habitat analogues such as rocky shores, and because following construction, they have abundant resources (space) for species to colonise. Despite the perceived importance of these habitat features, few studies have directly compared distributions of native and non-indigenous species or considered how functional identity and associated environmental preferences drive associations. We undertook a meta-analysis to investigate whether colonisation of native and non-indigenous species varies between artificial structures with features most closely resembling natural habitats (natural substrates, fixed structures, surfaces oriented upwards) and those least resembling natural habitats (artificial materials, floating structures, downfacing or vertical surfaces), or whether functional identity is the primary driver of differences. Analyses were done at global and more local (SE Australia) scales to investigate if patterns held regardless of scale. Our results suggest that functional group (i.e., algae, ascidians. barnacles, bryozoans, polychaetes) rather than species classification (i.e., native or non-indigenous) are the main drivers of differences in communities between different types of artificial structures. Specifically, there were differences in the abundance of ascidians, barnacles, and polychaetes between (1) upfacing and downfacing/vertical surfaces, and (2) floating and fixed substrates. When differences were detected, taxa were most abundant on features least resembling natural habitats. Results varied between global and SE Australian analyses, potentially due to reduced variability across studies in the SE Australian dataset. Thus, the functional group and associated preferences of the highest threat NIS in the area should be considered in design strategies (e.g., ecological engineering) to limit their establishment on newly built infrastructure.

Modifiable Individual Risks of Perioperative Blood Transfusions and Acute Postoperative Complications in Total Hip and Knee Arthroplasty.

BACKGROUND: The primary aim of this study was to identify modifiable patient-related predictors of blood transfusions and perioperative complications in total hip and knee arthroplasty. Individual predictor-adjusted risks can be used to define preoperative treatment thresholds. METHODS: We performed this retrospective monocentric study in orthopaedic patients who underwent primary total knee or hip arthroplasty. Multivariate logistic regression models were used to assess the predictive value of patient-related characteristics. Predictor-adjusted individual risks of blood transfusions and the occurrence of any perioperative adverse event were calculated for potentially modifiable risk factors. RESULTS: 3754 patients were included in this study. The overall blood transfusion and complication rates were 4.8% and 6.4%, respectively. Haemoglobin concentration (Hb, p < 0.001), low body mass index (BMI, p < 0.001) and estimated glomerular filtration rate (eGFR, p = 0.004) were the strongest potentially modifiable predictors of a blood transfusion. EGFR (p = 0.001) was the strongest potentially modifiable predictor of a complication. Predictor-adjusted risks of blood transfusions and acute postoperative complications were calculated for Hb and eGFR. Hb = 12.5 g/dL, BMI = 17.6 kg/m2, and eGFR = 54 min/mL were associated, respectively, with a 10% risk of a blood transfusion, eGFR = 59 mL/min was associated with a 10% risk of a complication. CONCLUSION: The individual risks for blood transfusions and acute postoperative complications are strongly increased in patients with a low preoperative Hb, low BMI or low eGFR. We recommend aiming at a preoperative Hb ≥ 13g/dL, an eGFR ≥ 60 mL/min and to avoid a low BMI. Future studies must show if a preoperative increase of eGFR and BMI is feasible and truly beneficial.

Long-Term Neurodevelopmental and Functional Outcomes of Infants Born Very Preterm and/or with a Very Low Birth Weight.

BACKGROUND: Birth weight (BW) is often used as a proxy for gestational age (GA) in studies on preterm birth. Recent findings indicate that, in addition to perinatal outcomes, subjects born very preterm (VP; GA < 32 weeks) differ from those with a very low birth weight (VLBW; BW < 1,500 g) in postnatal growth up to their final height. OBJECTIVE: To study whether neurodevelopmental and functional outcomes at the age of 19 years differ in VP and/or VLBW subjects. METHODS: 705 19-year-old subjects from the Project on Preterm and Small-for-Gestational-Age Infants (POPS) cohort were classified as (1) VP+/VLBW+ (n = 354), (2) VP+/VLBW- (n = 144), or (3) VP-/VLBW+ (n = 207), and compared with regard to IQ as assessed with the Multicultural Capacity Test-intermediate level; neuromotor function using Touwen's examination of mild neurologic dysfunction; hearing loss; self- and parent-reported behavioral and emotional functioning; educational achievement and occupation; and self-assessed health using the Health Utilities Index and the London Handicap Scale. RESULTS: VP+/VLBW- infants, on average, had 3.8-point higher IQ scores (95% confidence interval [CI] 0.5-7.1), a trend towards higher educational achievement, 3.3-dB better hearing (95% CI 1.2-5.4), and less anxious behavior, attention problems, and internalizing behavior than to VP+/VLBW+ subjects. VP-/VLBW+ infants reported 1.8 increased odds (95% CI 1.2-2.6) of poor health compared to VP+/VLBW+ subjects. CONCLUSIONS: At the age of 19 years, subjects born VP+/VLBW+, VP+/VLBW-, and VP-/VLBW+ have different neurodevelopmental and functional outcomes, although effect sizes are small. Hence, the terms VP and VLBW are not interchangeable. We recommend, at least for industrialized countries, to base inclusion in future studies on preterm populations on GA instead of on BW.