Reducing blood flow pulsation artifacts in 3D time-of-flight angiography by locally scrambling the order of the acquisition at 3 T and 7 T.

PURPOSE: Non-contrast-enhanced time of flight (TOF) is a standard method for magnetic resonance angiography used to depict vessel morphology. TOF is commonly performed with a 3D steady-state acquisition, employing a short repetition time to support high resolution imaging. At 7 T, TOF exhibits substantial increase in SNR and contrast, improving its clinical value. However, one of the remaining challenges, exacerbated at 7 T, is the presence of artifacts due to pulsatile blood flow, especially near major blood vessels. In this study we examine a method to significantly reduce these artifacts. METHODS: We recently introduced a new "local-scrambling" approach that semi-randomizes the acquisition order of the phase encodes, to achieve a controllable cutoff frequency above which the artifacts are drastically reduced. With this approach, artifacts resulting from fast local fluctuations such as cardiac pulsation are significantly reduced. In this study, we explore the ability of this local-scrambling approach to reduce pulsatile blood flow artifacts in a 3D TOF acquisition. Cartesian line-by-line and center-out ordering, with and without local-scrambling, were compared in simulations and in human brain imaging at 3 and 7 T scanners. RESULTS: In the simulations the artifact intensity showed a 10-fold reduction using local-scrambling compared to line-by-line and 4-fold compared to center-out ordering. In vivo results show that artifacts are much more pronounced at 7 T compared to 3 T, and in both cases they are effectively reduced by local-scrambling. CONCLUSION: Local-scrambling improves image quality for both line-by-line and center-out ordering. This approach can easily be implemented in the scanner without any changes to the reconstruction.

A Metamaterial-like Structure Design Using Non-uniformly Distributed Dielectric and Conducting Strips to Boost the RF Field Distribution in 7 T MRI.

Metamaterial-based designs in ultra-high field (≥7 T) MRI have the promise of increasing the local magnetic resonance imaging (MRI) signal and potentially even the global efficiency of both the radiofrequency (RF) transmit and receive resonators. A recently proposed metamaterial-like structure-comprised of a high-permittivity dielectric material and a set of evenly distributed copper strips-indeed resulted in a local increase in RF transmission. Here, we demonstrate that non-uniform designs of this metamaterial-like structure can be used to boost the ultimate RF field distribution. A non-uniform dielectric distribution can yield longer electric dipoles, thus extending the RF transmit field coverage. A non-uniform distribution of conducting strips enables the tailoring of the local electric field hot spots, where a concave distribution resulted in lower power deposition. Simulations of the brain and calf regions using our new metamaterial-like design, which combines non-uniform distributions of both the dielectric and conducting strips, revealed a 1.4-fold increase in the RF field coverage compared to the uniform distribution, and a 1.5-2-fold increase in the transmit efficiency compared to the standard surface-coil.

Messing up to clean up: Semi-randomized frequency selective space-filling curves to suppress physiological signal fluctuations in MRI.

PURPOSE: Rapid 3D steady-state sequences are widely used but are also known to be sensitive to semi-periodic physiological signal fluctuations due to, for example, cardiac pulsation, breathing, and eye/eyelids movement. This semi-periodicity results in repeating artifacts in the image whose intensity depends on the scan parameters. The purpose of this study is to design a reordering of the 2D phase encodes (within the 3D acquisition) that reduces these artifacts. METHODS: A randomized order of the phase encodes can suppress repeating artifact but may also introduce its own apparent noise, for example, in cases of slow subject movement or gradual changes in eddy currents. In a new design a semi-randomized space-filling curve is generated by scrambling the local order of the phase encodes to achieve a controlled frequency selective effect, that is, eliminating artifacts above a chosen (fluctuation) frequency threshold while leaving lower frequencies untouched, thus overcoming the limitations of a randomized order. The method was characterized in simulations and substantiated by human brain imaging at 7 T using two steady-state gradient echo variants that suffer from pulsation, either near blood vessels or near the ventricles. RESULTS: The simulations with a point source show that the maximum artifact intensity can be reduced by factors of 10-50 depending on the scan parameters. In human scanning, the new approach drastically reduced physiologically induced artifacts and was superior in this regard to both full randomization and a generalized Hilbert curve, another semi-randomized approach. CONCLUSION: The phase-encodes reordering presented here effectively removes artifacts arising from local fluctuations.

Artifact suppression in readout-segmented consistent K-t space EPSI (RS-COKE) for fast 1 H spectroscopic imaging at 7 T.

PURPOSE: Fast proton (1 H) MRSI is an important diagnostic tool for clinical investigations, providing metabolic and spatial information. MRSI at 7 T benefits from increased SNR and improved separation of peaks but requires larger spectral widths. RS-COKE (Readout-Segmented Consistent K-t space Epsi) is an echo planar spectroscopic imaging (Epsi) variant capable to support the spectral width required for human brain metabolites spectra at 7 T. However, mismatches between readout segments lead to artifacts, particularly when subcutaneous lipid signals are not suppressed. In this study, these mismatches and their effects are analyzed and reduced. METHODS: The following corrections to the data were performed: i) frequency-dependent phase corrections; ii) k-space trajectory corrections, derived from short reference scans; and iii) smoothing of data at segment transitions to mitigate the effect of residual mismatches. The improvement was evaluated by performing single-slice RS-COKE on a head-shaped phantom with a "lipid" layer and healthy subjects, using varying resolutions and durations ranging from 4.1 × 4.7 × 15 mm3 in 5:46 min to 3.1 × 3.3 × 15 mm3 in 13:07 min. RESULTS: Artifacts arising from the readout-segmented acquisition were substantially reduced, thus providing high-quality spectroscopic imaging in phantom and human scans. LCModel fitting of the human data resulted in a relative Cramer-Rao lower bounds within 6% for NAA, Cr, and Cho images in the majority of the voxels. CONCLUSION: Using the new reference scans and reconstruction steps, RS-COKE was able to deliver fast 1 H MRSI at 7 T, overcoming the spectral width limitation of standard EPSI at this field strength.

Novel materials in magnetic resonance imaging: high permittivity ceramics, metamaterials, metasurfaces and artificial dielectrics.

This article reviews recent developments in designing and testing new types of materials which can be: (i) placed around the body for in vivo imaging, (ii) be integrated into a conventional RF coil, or (iii) form the resonator itself. These materials can improve the quality of MRI scans for both in vivo and magnetic resonance microscopy applications. The methodological section covers the basic operation and design of two different types of materials, namely high permittivity materials constructed from ceramics and artificial dielectrics/metasurfaces formed by coupled conductive subunits, either in air or surrounded by dielectric material. Applications of high permittivity materials and metasurfaces placed next to the body to neuroimaging and extremity imaging at 7 T, body and neuroimaging at 3 T, and extremity imaging at 1.5 T are shown. Results using ceramic resonators for both high field in vivo imaging and magnetic resonance microscopy are also shown. The development of new materials to improve MR image quality remains an active area of research, but has not yet found significant use in clinical applications. This is mainly due to practical issues such as specific absorption rate modelling, accurate and reproducible placement, and acceptable size/weight of such materials. The most successful area has been simple "dielectric pads" for neuroimaging at 7 T which were initially developed somewhat as a stop-gap while parallel transmit technology was being developed, but have continued to be used at many sites. Some of these issues can potentially be overcome using much lighter metasurfaces and artificial dielectrics, which are just beginning to be assessed.

Realistic head-shaped phantom with brain-mimicking metabolites for 7 T spectroscopy and spectroscopic imaging.

PURPOSE: Moving to ultra-high fields (≥7 T), the inhomogeneity of both RF (B1 ) and static (B0 ) magnetic fields increases, which further motivates us to design a realistic head-shaped phantom, especially for spectroscopic imaging. Such phantoms provide images similar to the human brain and serve as a reliable tool for developing and examining methods in MRI. This study aims to develop and characterize a realistic head-shaped phantom filled with brain-mimicking metabolites for MRS and magnetic resonance spectroscopic imaging in a 7 T MRI scanner. METHODS: A 3D head-shaped container with three sections-mimicking brain, muscle and precranial lipid-was constructed. The phantom was designed to provide robustness to heating, mechanical damage and leakage, with easy refilling. The head's shape and the agarose mixture were optimized to provide B0 and B1 distributions and T1 /T2 relaxation values similar to those of human brain. Eight brain-tissue-mimicking metabolites were included for spectroscopy. The phantom was evaluated for localized spectroscopy, fast spectroscopic imaging and fat suppression. RESULTS: The B0 and B1 maps showed distribution similar to that of human brain, with increased B0 inhomogeneity near the nasal and ear areas and reduced B1 in the temporal lobe and brain stem regions, as expected in vivo. The metabolites' concentrations were verified by single-voxel spectroscopy, showing an average deviation of 11%. Fast spectroscopic imaging and imaging with fat suppression were demonstrated. CONCLUSION: A 3D head-shaped phantom for human brain imaging and spectroscopic imaging in 7 T MRI was demonstrated, making it a realistic phantom for methodology development at 7 T.

Combining multiband slice selection with consistent k-t-space EPSI for accelerated spectral imaging.

PURPOSE: To design and implement a multislice MRSI method for fast spectroscopic imaging, using a modified version of echo planar spectroscopic imaging (EPSI) that offers higher spectral width and/or shorter scan time. METHODS: Echo planar spectroscopic imaging suffers from inconsistencies between readout lines acquired with gradients of opposite signs, which has typically been addressed by reconstructing the "positive" and "negative" data sets separately and averaging the two. Nevertheless, consistency between the readout lines of each phase encode can be achieved by interposing the EPSI readouts with alternating "blipped" phase-encode gradients. This method exchanges inconsistencies along the temporal dimension with inconsistencies along the phase-encode dimension, which are straightforward to correct, as is conventionally done in various EPI reconstruction schemes. Such consistent k-t-space EPSI doubles the spectral width in comparison to EPSI, or, in an alternative realization, yields the same spectral width as EPSI, but at half the acquisition time. In this work, multiband CAIPIRINHA (controlled aliasing in parallel imaging results in higher acceleration) slice selection was integrated with consistent k-t-space EPSI to further accelerate the measurement 2-fold. RESULTS: The feasibility of a consistent k-t-space EPSI was demonstrated in both phantoms and in vivo brain imaging at 3 T, and four pulse scheme variants were evaluated. It was demonstrated to be useful in optimizing the spectral width and scan acceleration, both of which are limiting factors in vivo. Dual-band implementation was shown to shorten the duration of the scan 4-fold. CONCLUSION: The consistent k-t-space EPSI can be used to accelerate MRSI or, alternatively, double its spectral width. Adding dual-band CAIPIRINHA further accelerates the acquisition by a factor of 2.

Quadrature operation of segmented dielectric resonators facilitated with metallic connectors.

PURPOSE: To design and characterize dual-segment dielectric resonators (DR) and assess their performance for in vivo imaging and localized proton spectroscopy at 7 Tesla. METHODS: Annular DRs operating in the HEM11 mode at ultrahigh field have advantage of a simple design with an intrinsically circularly polarized homogeneous mode. However, practical realization for extremity imaging requires a splittable design for patient comfort and positioning. Splitting the annulus segments breaks the resonator symmetry and the circularly polarized distribution is lost. Here, we show that one can restore the electromagnetic modes by incorporating copper connectors between the segments. By designing the connectors such that two modes become frequency degenerate, one can also generate circularly polarized modes in a half-annular resonator. Electromagnetic simulations were performed and phantom and in vivo experiments conducted using custom-built DRs. RESULTS: Electromagnetic simulations showed that using copper interconnectors, the resonant modes could be restored. This was confirmed in phantom experiments, as well as in vivo images of the human knee using a dual-segment splittable annular DR and images and localized spectra of the human calf muscle acquired using a dual-segment half-annular resonator. CONCLUSION: A new approach incorporating copper connectors into the DR structure allows efficient operation of splittable DRs. Magn Reson Med 77:2431-2437, 2017. © 2016 International Society for Magnetic Resonance in Medicine.

Interleaved multishot imaging by spatiotemporal encoding: A fast, self-referenced method for high-definition diffusion and functional MRI.

PURPOSE: Single-shot imaging by spatiotemporal encoding (SPEN) can provide higher immunity to artifacts than its echo planar imaging-based counterparts. Further improvements in resolution and signal-to-noise ratio could be made by rescinding the sequence's single-scan nature. To explore this option, an interleaved SPEN version was developed that was capable of delivering optimized images due to its use of a referenceless correction algorithm. METHODS: A characteristic element of SPEN encoding is the absence of aliasing when its signals are undersampled along the low-bandwidth dimension. This feature was exploited in this study to segment a SPEN experiment into a number of interleaved shots whose inaccuracies were automatically compared and corrected as part of a navigator-free image reconstruction analysis. This could account for normal phase noises, as well as for object motions during the signal collection. RESULTS: The ensuing interleaved SPEN method was applied to phantoms and human volunteers and delivered high-quality images even in inhomogeneous or mobile environments. Submillimeter functional MRI activation maps confined to gray matter regions as well as submillimeter diffusion coefficient maps of human brains were obtained. CONCLUSION: We have developed an interleaved SPEN approach for the acquisition of high-definition images that promises a wider range of functional and diffusion MRI applications even in challenging environments.

Removing silicone artifacts in diffusion-weighted breast MRI by means of shift-resolved spatiotemporally encoding.

PURPOSE: Evaluate the usefulness of diffusion-weighted spatiotemporally encoded (SPEN) methods to obtain apparent diffusion coefficient (ADC) maps of fibroglandular human breast tissue, in the presence of silicone implants. METHODS: Seven healthy volunteers with breast augmentation were scanned at 3 Tesla (T) using customized SPEN sequences yielding separate silicone and water (1) H images in one scan, together with their corresponding diffusion-weightings. RESULTS: SPEN's ability to deliver multiple spectrally resolved images in a single scan, coupled to the method's substantial robustness to magnetic field heterogeneities, served to acquire ADC maps that could be freed from contributions that did not belong to fibroglandular tissue. CONCLUSION: SPEN-based sequences incorporating spectral discrimination and diffusion-weighting enable the acquisition of reliable ADC maps despite the presence of dominant signals from silicone implants, thereby opening new screening possibilities for the identification of malignancies in breast augmented patients.

New spatiotemporal approaches for fully refocused, multislice ultrafast 2D MRI.

PURPOSE: Single-scan multislice acquisition schemes play key roles in magnetic resonance imaging. Central among these "ultrafast" experiments stands echo-planar imaging, a technique that although of optimal sampling is challenged by T2* artifacts. Recent studies described alternatives based on spatiotemporal encoding (SPEN), which are particularly robust if implemented in a "full-refocusing" mode. This work extends this modality from the single-slice acquisitions in which it has hitherto been implemented, by introducing a variety of multislice schemes scanning 3D volumes. METHODS: Multislice SPEN employing either inversion or stimulated echo pulses and timed to fulfill the demands of full refocusing, are demonstrated. The performance of the ensuing methods was examined in "Hybrid" modalities encoding data in k- and direct-space, in low-specific absorption rate stimulated-echo approaches, and in direct-space SPEN approaches. RESULTS: When applied in phantoms and in in vivo systems, the ensuing single-shot sequences evidenced similar robustness, sensitivity, and resolution qualities as previously discussed 2D single-slice schemes, while enabling a rapid sampling of the third dimension via multislicing. CONCLUSION: The unique benefits deriving from fully refocused, multislice, single-scan SPEN sequences were corroborated by phantom tests, as well as by in vivo scans at 3 and 7 T. Low specific absorption rate multislice SPEN variants compatible with human studies were demonstrated.

Simultaneous spatial and spectral selectivity by spatiotemporal encoding.

PURPOSE: To introduce a method that provides simultaneous spatial and spectral selectivity, whose implementation is less demanding than-and quality comparable to-conventional 2D spectral-spatial counterparts. THEORY: Spatiotemporal encoding concepts lead to a spatially selective, chemical-shift-dependent echo, with simultaneous dephasing of all other off-resonant species. The approach only requires applying a pair of suitable radiofrequency-swept pulses, and allows arbitrary shaping of the spatial profiles. METHODS: Based on arguments derived for chirp pulses operating in the sequential-sweep approximation, quadratic-phase SLR excitation and refocusing waveforms were designed and used to collect 2D slice- and shift-selective images on a 7 T microimaging system (phantoms). The same strategy was used to obtain multi-slice echo-planar and spin-echo images of breast on human volunteers in a 3 T scanner. RESULTS: The method managed to deliver excellent shift-selective multi-slice images in phantoms and human volunteers. Simultaneous water and fat images were also collected in a single, interleaved acquisition mode on both platforms, using straightforward sequence and reconstruction modifications of the basic scheme. CONCLUSION: A new way to achieve chemical shift selectivity with high quality spatial profiling is achieved, without the usual requirements for playing out fast oscillating gradients in conjunction with carefully timed radiofrequency pulses.

Referenceless reconstruction of spatiotemporally encoded imaging data: principles and applications to real-time MRI.

PURPOSE: Ultrafast sequences based on "Hybrid" spatiotemporal encoding (SPEN) replace echo-planar imaging's phase encoding "blips," while retaining a k-space readout acquisition. Hardware imperfections during acquisition may lead to ghosts and striped artifacts along the SPEN dimension; akin to echo-planar imaging's Nyquist ghosts, but weaker. A referenceless method to eliminate these artifacts in Hybrid SPEN is demonstrated. THEORY AND METHODS: Owing to its encoding in direct space, rather than reciprocal space, undersampling in SPEN does not generate an echo-planar-imaging-like aliasing, but instead lowers the spatial resolution. Hybrid SPEN data can be split into two undersampled signals: a reference one comprised of the odd-echos, and an even-echo set that has to be "corrected" for consistency with the former. A simple way of implementing such a correction that enables a joint high-resolution reconstruction is proposed. RESULTS: The referenceless algorithm is demonstrated with various examples, including oblique scans, large in vivo datasets from real-time dynamic contrast-enhanced perfusion experiments, and human brain imaging. CONCLUSIONS: The referenceless correction enables robust single-scan imaging under changing conditions-such as patient motion and changes in shimming over time-without the need of ancillary navigators. This opens new options for real-time MRI and interactive scanning.

Shaping the RF Transmit Field in 7T MRI Using a Nonuniform Metasurface Constructed of Short Conducting Strips.

The ability of metamaterial structures to offer unique properties and new solutions has opened new avenues in a wide range of applications, including super-resolution in optics and efficient antennas in radiofrequency (RF) engineering. In magnetic resonance imaging (MRI), metamaterials hold the promise of increasing the RF magnetic field intensity while minimizing power deposition. Here, we propose a metasurface based on a two-dimensional (2D) array of short conducting strips combined with a high dielectric substrate, which was tuned to operate at ultrahigh field 7T human MRI. While studied in optics and electromagnetics in the GHz-to-THz range, this study is the first to design such a metasurface for proton imaging at 7T MRI. We performed electromagnetic (EM) simulation of the brain MRI setup with the new metasurface placed in the proximity to the temporal lobe, which showed 2.2-fold local increase in the RF transmit efficiency, with superior performance than an array of electric dipoles. In this study, we also investigate the effect of the spatial distribution of the subunits to control the target RF field's distribution. While the common design is based on a uniform distribution of the subunits, nonuniform distribution, such as a denser center (convex) or more condensed edges (concave), provides an extra dimension to tailor both the magnetic and electric fields. The concave distribution achieved 1.5-1.8-fold reduction in the power deposition compared to the uniform distribution in the brain MRI setups examined.

Magnetic Mesoporous Silica for Targeted Drug Delivery of Chloroquine: Synthesis, Characterization, and In Vitro Evaluation.

Malaria is a dangerous tropical disease, with high morbidity in developing countries. The responsible parasite has developed resistance to the existing drugs; therefore, new drug delivery systems are being studied to increase efficacy by targeting hemozoin, a parasite paramagnetic metabolite. Herein, magnetic mesoporous silica (magMCM) was synthesized using iron oxide particles dispersed in the silica structure for magnetically driven behavior. The X-ray diffractogram (XRD) and Mössbauer spectra show patterns corresponding to magnetite and maghemite. Furthermore, Mössbauer spectroscopy revealed superparamagnetic behavior, attributed to single magnetic domains in particles smaller than 10 nm. Even in the presence of iron oxide particles, the hexagonal structure of MCM is clearly identified in XRD (low-angle region) and the channels are visible in TEM images. The drug chloroquine (CQ) was encapsulated by incipient wetness impregnation (magMCM-CQ). The N2 adsorption-desorption isotherms show that CQ molecules were encapsulated in the pores, without completely filling the mesopores. BET surface area values were 630 m2 g-1 (magMCM) and 467 m2 g-1 (magMCM-CQ). Encapsulated CQ exhibited rapid delivery (99% in 3 h) in buffer medium and improved solubility compared to the non-encapsulated drug, attributed to CQ encapsulation in amorphous form. The biocompatibility assessment of magMCM, magMCM-CQ, and CQ against MRC5 non-tumoral lung fibroblasts using the MTT assay after 24 h revealed no toxicity associated with magMCM. On the other hand, the non-encapsulated CQ and magMCM-CQ exhibited comparable dose-response activity, indicating a similar cytotoxic effect.

In vivo 3D spatial/1D spectral imaging by spatiotemporal encoding: a new single-shot experimental and processing approach.

A novel method for acquiring and processing quality multislice spectroscopically resolved 2D images in a single shot is introduced and illustrated. By contrast to the majority of single-scan spectroscopic imaging sequences developed so far, the method here discussed is not based on the acquisition of echo planar data in the k/t-space, but rather on the use of recently proposed spatiotemporal encoding methods. These techniques provide a robust alternative to classical techniques, as they can scan two spatial plus one spectral dimension by oscillating a single imaging gradient. This work demonstrates that the use of extended spectral/spatial super-resolution algorithms coupled to new experimental spatiotemporal encoding formulations based on swept inversions rather than on chirped excitations can lead to novel spatiotemporal encoding-based tools for resolving complex multisliced 2D images according to the chemical shifts in subsecond experiments. A number of phantom-based models were explored to clarify the relative merits of this technique and estimate its sensitivity performance. In vivo results of fat and water separation on abdominal imaging of mice at 7 T and on human breast imaging at 3 T are presented.

Alleviating artifacts in 1H MRI thermometry by single scan spatiotemporal encoding.

OBJECTIVE: Recent years have seen an increased interest in combining MRI thermometry with devices capable of destroying malignancies by heat ablation. Expected from the MR protocols are accurate and fast thermal characterizations, providing real time feedback on restricted tissue volumes and/or rapidly moving organs like liver. This article explores the potential advantages of relying on spatiotemporally encoded (SPEN) sequences for retrieving real-time thermometric images based on the water's proton resonance frequency (PRF) shifts. MATERIALS AND METHODS: Hybrid spatiotemporal/k-space encoding single-scan MRI experiments were implemented on animal and human scanners, and their abilities to deliver single- and multi-slice real-time thermometric measurements based on PRF-derived phase maps in phantoms and in vivo, were compared against echo planar imaging (EPI) and gradient-echo counterparts. RESULTS: Under comparable acquisition conditions, SPEN exhibited advantages vis-à-vis EPI in terms of dealing with inhomogeneous magnetic field distortions, with shifts arising due to changes in the central frequency offsets, with PRF distributions, and for zooming into restricted fields-of-view without special pulse sequence provisions. CONCLUSION: This work confirms the ability of SPEN sequences, particularly when implemented under fully-refocused conditions, to exploit their built-in robustness to shift- and field-derived inhomogeneities for monitoring thermal changes in real-time under in vitro and in vivo conditions.

Phase-based fast 3D high-resolution quantitative T2 MRI in 7 T human brain imaging.

Magnetic resonance imaging (MRI) is a powerful and versatile technique that offers a range of physiological, diagnostic, structural, and functional measurements. One of the most widely used basic contrasts in MRI diagnostics is transverse relaxation time (T2)-weighted imaging, but it provides only qualitative information. Realizing quantitative high-resolution T2 mapping is imperative for the development of personalized medicine, as it can enable the characterization of diseases progression. While ultra-high-field (≥ 7 T) MRI offers the means to gain new insights by increasing the spatial resolution, implementing fast quantitative T2 mapping cannot be achieved without overcoming the increased power deposition and radio frequency (RF) field inhomogeneity at ultra-high-fields. A recent study has demonstrated a new phase-based T2 mapping approach based on fast steady-state acquisitions. We extend this new approach to ultra-high field MRI, achieving quantitative high-resolution 3D T2 mapping at 7 T while addressing RF field inhomogeneity and utilizing low flip angle pulses; overcoming two main ultra-high field challenges. The method is based on controlling the coherent transverse magnetization in a steady-state gradient echo acquisition; achieved by utilizing low flip angles, a specific phase increment for the RF pulses, and short repetition times. This approach simultaneously extracts both T2 and RF field maps from the phase of the signal. Prior to in vivo experiments, the method was assessed using a 3D head-shaped phantom that was designed to model the RF field distribution in the brain. Our approach delivers fast 3D whole brain images with submillimeter resolution without requiring special hardware, such as multi-channel transmit coil, thus promoting high usability of the ultra-high field MRI in clinical practice.