RESUMO
This paper introduces a simple method for the measurement of the relative permittivity and the Pockels coefficient of electro-optic (EO) materials in a waveguide up to sub-THz frequencies. By miniaturizing the device and making use of plasmonics, the complexities of traditional methods are mitigated. This work elaborates the fabrication tolerance and simplicity of the method, and highlights its applicability to various materials, substrates and configurations. The method is showcased using drop-casted perovskite barium titanate (BaTiO3, BTO) nano-particle thin-films and it has previously been used to measure epitaxial thin film BTO. In this work we show the effective relative permittivity of drop casted BTO to be εeff â¼ 30 at 200â MHz, dropping to â¼ 18 at 67â GHz and similarly, the effective Pockels coefficient was found to be reff â¼ 16 at 350â MHz and â¼ 8 at 70â GHz. These values are a factor > 50 below the values found for thin film BTO. Yet, the fact that the method can be applied to such different samples and Pockels strengths gives testimony to its versatility and sensitivity.
RESUMO
Phototransistors are light-sensitive devices featuring a high dynamic range, low-light detection, and mechanisms to adapt to different ambient light conditions. These features are of interest for bioinspired applications such as artificial and restored vision. In this work, we report on a graphene-based phototransistor exploiting the photogating effect that features picowatt- to microwatt-level photodetection, a dynamic range covering six orders of magnitude from 7 to 107 lux, and a responsivity of up to 4.7 × 103 A/W. The proposed device offers the highest dynamic range and lowest optical power detected compared to the state of the art in interfacial photogating and further operates air stably. These results have been achieved by a combination of multiple developments. For example, by optimizing the geometry of our devices with respect to the graphene channel aspect ratio and by introducing a semitransparent top-gate electrode, we report a factor 20-30 improvement in responsivity over unoptimized reference devices. Furthermore, we use a built-in dynamic range compression based on a partial logarithmic optical power dependence in combination with control of responsivity. These features enable adaptation to changing lighting conditions and support high dynamic range operation, similar to what is known in human visual perception. The enhanced performance of our devices therefore holds potential for bioinspired applications, such as retinal implants.
RESUMO
Efficient and simple-to-fabricate light detectors in the mid infrared (MIR) spectral range are of great importance for various applications in existing and emerging technologies. Here, we demonstrate compact and efficient photodetectors operating at room temperature in a wavelength range of 2710-4250 nm with responsivities as high as 375 and 4 A/W. Key to the high performance is the combination of a sintered colloidal quantum dot (CQD) lead selenide (PbSe) and lead sulfide (PbS) heterojunction photoconductor with a metallic metasurface perfect absorber. The combination of this photoconductor stack with the metallic metasurface perfect absorber provides an overall â¼20-fold increase of the responsivity compared against reference sintered PbSe photoconductors. More precisely, the introduction of a PbSe/PbS heterojunction increases the responsivity by a factor of â¼2 and the metallic metasurface enhances the responsivity by an order of magnitude. The metasurface not only enhances the light-matter interaction but also acts as an electrode to the detector. Furthermore, fabrication of our devices relies on simple and inexpensive methods. This is in contrast to most of the currently available (state-of-the-art) MIR photodetectors that rely on rather expensive as well as nontrivial fabrication technologies that often require cooling for efficient operation.
RESUMO
Although graphene has met many of its initially predicted optoelectronic, thermal, and mechanical properties, photodetectors with large spectral bandwidths and extremely high frequency responses remain outstanding. In this work, we demonstrate a >500 gigahertz, flat-frequency response, graphene-based photodetector that operates under ambient conditions across a 200-nanometer-wide spectral band with center wavelengths adaptable from <1400 to >4200 nanometers. Our detector combines graphene with metamaterial perfect absorbers with direct illumination from a single-mode fiber, which breaks with the conventional miniaturization of photodetectors on an integrated photonic platform. This design allows for much higher optical powers while still allowing record-high bandwidths and data rates. Our results demonstrate that graphene photodetectors can outperform conventional technologies in terms of speed, bandwidth, and operation across a large spectral range.