Fibroblast growth factor 9 (FGF9)-mediated neurodegeneration: Implications for progressive multiple sclerosis?

AIMS: Fibroblast growth factor (FGF) signalling is dysregulated in multiple sclerosis (MS) and other neurological and psychiatric conditions, but there is little or no consensus as to how individual FGF family members contribute to disease pathogenesis. Lesion development in MS is associated with increased expression of FGF1, FGF2 and FGF9, all of which modulate remyelination in a variety of experimental settings. However, FGF9 is also selectively upregulated in major depressive disorder (MDD), prompting us to speculate it may also have a direct effect on neuronal function and survival. METHODS: Transcriptional profiling of myelinating cultures treated with FGF1, FGF2 or FGF9 was performed, and the effects of FGF9 on cortical neurons investigated using a combination of transcriptional, electrophysiological and immunofluorescence microscopic techniques. The in vivo effects of FGF9 were explored by stereotactic injection of adeno-associated viral (AAV) vectors encoding either FGF9 or EGFP into the rat motor cortex. RESULTS: Transcriptional profiling of myelinating cultures after FGF9 treatment revealed a distinct neuronal response with a pronounced downregulation of gene networks associated with axonal transport and synaptic function. In cortical neuronal cultures, FGF9 also rapidly downregulated expression of genes associated with synaptic function. This was associated with a complete block in the development of photo-inducible spiking activity, as demonstrated using multi-electrode recordings of channel rhodopsin-transfected rat cortical neurons in vitro and, ultimately, neuronal cell death. Overexpression of FGF9 in vivo resulted in rapid loss of neurons and subsequent development of chronic grey matter lesions with neuroaxonal reduction and ensuing myelin loss. CONCLUSIONS: These observations identify overexpression of FGF9 as a mechanism by which neuroaxonal pathology could develop independently of immune-mediated demyelination in MS. We suggest targeting neuronal FGF9-dependent pathways may provide a novel strategy to slow if not halt neuroaxonal atrophy and loss in MS, MDD and potentially other neurodegenerative diseases.

Changes in microtubule overlap length regulate kinesin-14-driven microtubule sliding.

Microtubule-crosslinking motor proteins, which slide antiparallel microtubules, are required for the remodeling of microtubule networks. Hitherto, all microtubule-crosslinking motors have been shown to slide microtubules at a constant velocity until no overlap remains between them, leading to the breakdown of the initial microtubule geometry. Here, we show in vitro that the sliding velocity of microtubules, driven by human kinesin-14 HSET, decreases when microtubules start to slide apart, resulting in the maintenance of finite-length microtubule overlaps. We quantitatively explain this feedback using the local interaction kinetics of HSET with overlapping microtubules that cause retention of HSET in shortening overlaps. Consequently, the increased HSET density in the overlaps leads to a density-dependent decrease in sliding velocity and the generation of an entropic force that antagonizes the force exerted by the motors. Our results demonstrate that a spatial arrangement of microtubules can regulate the collective action of molecular motors through the local alteration of their individual interaction kinetics.

The dynamics of the monomeric restriction endonuclease BcnI during its interaction with DNA.

Endonucleases that generate DNA double strand breaks often employ two independent subunits such that the active site from each subunit cuts either DNA strand. Restriction enzyme BcnI is a remarkable exception. It binds to the 5΄-CC/SGG-3΄ (where S = C or G, '/' designates the cleavage position) target as a monomer forming an asymmetric complex, where a single catalytic center approaches the scissile phosphodiester bond in one of DNA strands. Bulk kinetic measurements have previously shown that the same BcnI molecule cuts both DNA strands at the target site without dissociation from the DNA. Here, we analyse the BcnI DNA binding and target recognition steps at the single molecule level. We find, using FRET, that BcnI adopts either 'open' or 'closed' conformation in solution. Next, we directly demonstrate that BcnI slides over long distances on DNA using 1D diffusion and show that sliding is accompanied by occasional jumping events, where the enzyme leaves the DNA and rebinds immediately at a distant site. Furthermore, we quantify the dynamics of the BcnI interactions with cognate and non-cognate DNA, and determine the preferred binding orientation of BcnI to the target site. These results provide new insights into the intricate dynamics of BcnI-DNA interactions.

Transport efficiency of membrane-anchored kinesin-1 motors depends on motor density and diffusivity.

In eukaryotic cells, membranous vesicles and organelles are transported by ensembles of motor proteins. These motors, such as kinesin-1, have been well characterized in vitro as single molecules or as ensembles rigidly attached to nonbiological substrates. However, the collective transport by membrane-anchored motors, that is, motors attached to a fluid lipid bilayer, is poorly understood. Here, we investigate the influence of motors' anchorage to a lipid bilayer on the collective transport characteristics. We reconstituted "membrane-anchored" gliding motility assays using truncated kinesin-1 motors with a streptavidin-binding peptide tag that can attach to streptavidin-loaded, supported lipid bilayers. We found that the diffusing kinesin-1 motors propelled the microtubules in the presence of ATP. Notably, we found the gliding velocity of the microtubules to be strongly dependent on the number of motors and their diffusivity in the lipid bilayer. The microtubule gliding velocity increased with increasing motor density and membrane viscosity, reaching up to the stepping velocity of single motors. This finding is in contrast to conventional gliding motility assays where the density of surface-immobilized kinesin-1 motors does not influence the microtubule velocity over a wide range. We reason that the transport efficiency of membrane-anchored motors is reduced because of their slippage in the lipid bilayer, an effect that we directly observed using single-molecule fluorescence microscopy. Our results illustrate the importance of motor-cargo coupling, which potentially provides cells with an additional means of regulating the efficiency of cargo transport.

Simultaneous Single-Molecule Force and Fluorescence Sampling of DNA Nanostructure Conformations Using Magnetic Tweezers.

We present a hybrid single-molecule technique combining magnetic tweezers and Förster resonance energy transfer (FRET) measurements. Through applying external forces to a paramagnetic sphere, we induce conformational changes in DNA nanostructures, which are detected in two output channels simultaneously. First, by tracking a magnetic bead with high spatial and temporal resolution, we observe overall DNA length changes along the force axis. Second, the measured FRET efficiency between two fluorescent probes monitors local conformational changes. The synchronized orthogonal readout in different observation channels will facilitate deciphering the complex mechanisms of biomolecular machines.

Outcomes of pirtobrutinib for relapsed/refractory mantle cell lymphoma in compassionate use program in Europe.

BACKGROUND: Mantle cell lymphoma (MCL) is a type of B-cell lymphoma that is currently incurable. Pirtobrutinib shows promising response rates in heavily pretreated MCL patients according to the approval study, but the real-world data are scarce. METHODS: In this study, we retrospectively analyzed the efficacy and safety profile of pirtobrutinib in 10 relapsed/refractory MCL patients from compassionate use program (CUP). RESULTS: On average, the patients underwent three lines of systemic therapy prior to pirtobrutinib and were predominantly BTKi exposed (9/10). The best overall response rate (BORR) was 67%. In a median follow-up of 8.6 months, the mean duration of response (DOR), progression-free survival (PFS), and overall survival (OS) were not reached. No new safety signals were documented. CONCLUSIONS: In summary, pirtobrutinib represented a safe and effective treatment option in a small real-world population.

DNA cleavage site selection by Type III restriction enzymes provides evidence for head-on protein collisions following 1D bidirectional motion.

DNA cleavage by the Type III Restriction-Modification enzymes requires communication in 1D between two distant indirectly-repeated recognitions sites, yet results in non-specific dsDNA cleavage close to only one of the two sites. To test a recently proposed ATP-triggered DNA sliding model, we addressed why one site is selected over another during cleavage. We examined the relative cleavage of a pair of identical sites on DNA substrates with different distances to a free or protein blocked end, and on a DNA substrate using different relative concentrations of protein. Under these conditions a bias can be induced in the cleavage of one site over the other. Monte-Carlo simulations based on the sliding model reproduce the experimentally observed behaviour. This suggests that cleavage site selection simply reflects the dynamics of the preceding stochastic enzyme events that are consistent with bidirectional motion in 1D and DNA cleavage following head-on protein collision.

Efficient preparation of internally modified single-molecule constructs using nicking enzymes.

Investigations of enzymes involved in DNA metabolism have strongly benefited from the establishment of single molecule techniques. These experiments frequently require elaborate DNA substrates, which carry chemical labels or nucleic acid tertiary structures. Preparing such constructs often represents a technical challenge: long modified DNA molecules are usually produced via multi-step processes, involving low efficiency intermolecular ligations of several fragments. Here, we show how long stretches of DNA (>50 bp) can be modified using nicking enzymes to produce complex DNA constructs. Multiple different chemical and structural modifications can be placed internally along DNA, in a specific and precise manner. Furthermore, the nicks created can be resealed efficiently yielding intact molecules, whose mechanical properties are preserved. Additionally, the same strategy is applied to obtain long single-strand overhangs subsequently used for efficient ligation of ss- to dsDNA molecules. This technique offers promise for a wide range of applications, in particular single-molecule experiments, where frequently multiple internal DNA modifications are required.

Type III restriction enzymes cleave DNA by long-range interaction between sites in both head-to-head and tail-to-tail inverted repeat.

Cleavage of viral DNA by the bacterial Type III Restriction-Modification enzymes requires the ATP-dependent long-range communication between a distant pair of DNA recognition sequences. The classical view is that Type III endonuclease activity is only activated by a pair of asymmetric sites in a specific head-to-head inverted repeat. Based on this assumption and due to the presence of helicase domains in Type III enzymes, various motor-driven DNA translocation models for communication have been suggested. Using both single-molecule and ensemble assays we demonstrate that Type III enzymes can also cleave DNA with sites in tail-to-tail repeat with high efficiency. The ability to distinguish both inverted repeat substrates from direct repeat substrates in a manner independent of DNA topology or accessory proteins can only be reconciled with an alternative sliding mode of communication.

Scanning evanescent fields using a pointlike light source and a nanomechanical DNA gear.

The characterization of three-dimensional inhomogeneous illumination fields is a challenge in modern microscopy. Here we use a four-arm DNA junction as a nanomechanical translation stage to move a single fluorescent quantum dot through an exponentially decaying evanescent field. Recording the emission of the quantum dot within the evanescent field as well as under homogeneous illumination allows one to directly obtain the intensity distribution of the excitation field without additional deconvolution. Our method will allow the characterization of a broad range of illumination fields and to study near-field effects between small optical probes.

X-ray and NMR crystallography in an enzyme active site: the indoline quinonoid intermediate in tryptophan synthase.

Chemical-level details such as protonation and hybridization state are critical for understanding enzyme mechanism and function. Even at high resolution, these details are difficult to determine by X-ray crystallography alone. The chemical shift in NMR spectroscopy, however, is an extremely sensitive probe of the chemical environment, making solid-state NMR spectroscopy and X-ray crystallography a powerful combination for defining chemically detailed three-dimensional structures. Here we adopted this combined approach to determine the chemically rich crystal structure of the indoline quinonoid intermediate in the pyridoxal-5'-phosphate-dependent enzyme tryptophan synthase under conditions of active catalysis. Models of the active site were developed using a synergistic approach in which the structure of this reactive substrate analogue was optimized using ab initio computational chemistry in the presence of side-chain residues fixed at their crystallographically determined coordinates. Various models of charge and protonation state for the substrate and nearby catalytic residues could be uniquely distinguished by their calculated effects on the chemical shifts measured at specifically (13)C- and (15)N-labeled positions on the substrate. Our model suggests the importance of an equilibrium between tautomeric forms of the substrate, with the protonation state of the major isomer directing the next catalytic step.

Parallel mapping of optical near-field interactions by molecular motor-driven quantum dots.

In the vicinity of metallic nanostructures, absorption and emission rates of optical emitters can be modulated by several orders of magnitude1,2. Control of such near-field light-matter interaction is essential for applications in biosensing3, light harvesting4 and quantum communication5,6 and requires precise mapping of optical near-field interactions, for which single-emitter probes are promising candidates7-11. However, currently available techniques are limited in terms of throughput, resolution and/or non-invasiveness. Here, we present an approach for the parallel mapping of optical near-field interactions with a resolution of <5 nm using surface-bound motor proteins to transport microtubules carrying single emitters (quantum dots). The deterministic motion of the quantum dots allows for the interpolation of their tracked positions, resulting in an increased spatial resolution and a suppression of localization artefacts. We apply this method to map the near-field distribution of nanoslits engraved into gold layers and find an excellent agreement with finite-difference time-domain simulations. Our technique can be readily applied to a variety of surfaces for scalable, nanometre-resolved and artefact-free near-field mapping using conventional wide-field microscopes.

Toward Self-Assembled Plasmonic Devices: High-Yield Arrangement of Gold Nanoparticles on DNA Origami Templates.

Plasmonic structures allow the manipulation of light with materials that are smaller than the optical wavelength. Such structures can consist of plasmonically active metal nanoparticles and can be fabricated through scalable bottom-up self-assembly on DNA origami templates. To produce functional devices, the precise and high-yield arrangement of each of the nanoparticles on a structure is of vital importance as the absence of a single particle can destroy the functionality of the entire device. Nevertheless, the parameters influencing the yield of the multistep assembly process are still poorly understood. To overcome this deficiency, we employed a test system consisting of a tubular six-helix bundle DNA origami with binding sites for eight oligonucleotide-functionalized gold nanoparticles. We systematically studied the assembly yield as a function of a wide range of parameters such as ionic strength, stoichiometric ratio, oligonucleotide linker chemistry, and assembly kinetics by an automated high-throughput analysis of electron micrographs of the formed heterocomplexes. Our optimized protocols enable particle placement yields up to 98.7% and promise the reliable production of sophisticated DNA-based multiparticle plasmonic devices for applications in photonics, optoelectronics, and nanomedicine.

The helicase-like domains of type III restriction enzymes trigger long-range diffusion along DNA.

Helicases are ubiquitous adenosine triphosphatases (ATPases) with widespread roles in genome metabolism. Here, we report a previously undescribed functionality for ATPases with helicase-like domains; namely, that ATP hydrolysis can trigger ATP-independent long-range protein diffusion on DNA in one dimension (1D). Specifically, using single-molecule fluorescence microscopy we show that the Type III restriction enzyme EcoP15I uses its ATPase to switch into a distinct structural state that diffuses on DNA over long distances and long times. The switching occurs only upon binding to the target site and requires hydrolysis of ~30 ATPs. We define the mechanism for these enzymes and show how ATPase activity is involved in DNA target site verification and 1D signaling, roles that are common in DNA metabolism: for example, in nucleotide excision and mismatch repair.