Thermal Properties and Segmental Dynamics of Polymer Melt Chains Adsorbed on Solid Surfaces.

The glass transition of supported polystyrene (PS) and poly(2-vinylpyridine) (P2VP) thin films in the vicinity of the substrate interface was studied by using a nanoplasmonic sensing (NPS) method. This "nanocalorimetric" approach utilizes localized surface plasmon resonance from two-dimensional arrangements of sensor nanoparticles deposited on SiO2-coated glass substrates. The NPS results demonstrated the existence of a high glass transition temperature ( Tg,high) along with the bulk glass transition temperature ( Tg,bulk ≈ 100 °C for PS and P2VP) within the thin films: Tg,high ≈ 160 °C for PS and Tg,high ≈ 200 °C for P2VP. To understand the origin of the Tg,high, we also studied the thermal transitions of lone polymer chains strongly adsorbed onto the substrate surface using solvent rinsing. Interestingly, the NPS data indicated that the Tg,high is attributed to the adsorbed polymer chains. To provide a better understanding of the mechanism of the Tg,high, molecular dynamics simulations were performed on a PS film adsorbed on hydrophobic and hydrophilic substrates. The simulation results illuminated the presence of a higher density region closest to the substrate surface regardless of the magnitude of the polymer-solid interactions. We postulate that the highly packed chain conformation reduces the free volume at the substrate interface, resulting in the Tg,high. Moreover, the simulation results revealed that the deviation of the Tg,high from the bulk Tg,bulk becomes larger as the polymer-substrate interaction increases, which is in line with the experimental findings.

Structure-induced switching of interpolymer adhesion at a solid-polymer melt interface.

Here we report a link between the interfacial structure and adhesive property of homopolymer chains physically adsorbed (i.e., via physisorption) onto solids. Polyethylene oxide (PEO) was used as a model and two different chain conformations of the adsorbed polymer were created on silicon substrates via the well-established Guiselin's approach: "flattened chains" which lie flat on the solid and are densely packed, and "loosely adsorbed polymer chains" which form bridges jointing up nearby empty sites on the solid surface and cover the flattened chains. We investigated the adhesion properties of the two different adsorbed chains using a custom-built adhesion testing device. Bilayers of a thick PEO overlayer on top of the flattened chains or loosely adsorbed chains were subjected to the adhesion test. The results revealed that the flattened chains do not show any adhesion even with the chemically identical free polymer on top, while the loosely adsorbed chains exhibit adhesion. Neutron reflectivity experiments corroborated that the difference in the interfacial adhesion is not attributed to the interfacial brodening at the free polymer-adsorbed polymer interface. Instead, coarse-grained molecular dynamics simulation results suggest that the tail parts of the loosely adsorbed chains act as "connector molecules", bridging the free chains and substrate surface and improving the interfacial adhesion. These findings not only shed light on the structure-property relationship at the interface, but also provide a novel approach for developing sticking/anti-sticking technologies through precise control of the interfacial polymer nanostructures.

Novel Effects of Compressed CO2 Molecules on Structural Ordering and Charge Transport in Conjugated Poly(3-hexylthiophene) Thin Films.

We report the effects of compressed CO2 molecules as a novel plasticization agent for poly(3-hexylthiophene) (P3HT)-conjugated polymer thin films. In situ neutron reflectivity experiments demonstrated the excess sorption of CO2 molecules in the P3HT thin films (about 40 nm in thickness) at low pressure (P = 8.2 MPa) under the isothermal condition of T = 36 °C, which is far below the polymer bulk melting point. The results proved that these CO2 molecules accelerated the crystallization process of the polymer on the basis of ex situ grazing incidence X-ray diffraction measurements after drying the films via rapid depressurization to atmospheric pressure: both the out-of-plane lamellar ordering of the backbone chains and the intraplane π-π stacking of the side chains were significantly improved, when compared with those in the control P3HT films subjected to conventional thermal annealing (at T = 170 °C). Electrical measurements elucidated that the CO2-annealed P3HT thin films exhibited enhanced charge carrier mobility along with decreased background charge carrier concentration and trap density compared with those in the thermally annealed counterpart. This is attributed to the CO2-induced increase in polymer chain mobility that can drive the detrapping of molecular oxygen and healing of conformational defects in the polymer thin film. Given the universality of the excess sorption of CO2 regardless of the type of polymers, the present findings suggest that CO2 annealing near the critical point can be useful as a robust processing strategy for improving the structural and electrical characteristics of other semiconducting conjugated polymers and related systems such as polymer:fullerene bulk heterojunction films.

Tuning membrane thickness fluctuations in model lipid bilayers.

Membrane thickness fluctuations have been associated with a variety of critical membrane phenomena, such as cellular exchange, pore formation, and protein binding, which are intimately related to cell functionality and effective pharmaceuticals. Therefore, understanding how these fluctuations are controlled can remarkably impact medical applications involving selective macromolecule binding and efficient cellular drug intake. Interestingly, previous reports on single-component bilayers show almost identical thickness fluctuation patterns for all investigated lipid tail-lengths, with similar temperature-independent membrane thickness fluctuation amplitude in the fluid phase and a rapid suppression of fluctuations upon transition to the gel phase. Presumably, in vivo functions require a tunability of these parameters, suggesting that more complex model systems are necessary. In this study, we explore lipid tail-length mismatch as a regulator for membrane fluctuations. Unilamellar vesicles of an equimolar mixture of dimyristoylphosphatidylcholine and distearoylphosphatidylcholine molecules, with different tail-lengths and melting transition temperatures, are used as a model system for this next level of complexity. Indeed, this binary system exhibits a significant response of membrane dynamics to thermal variations. The system also suggests a decoupling of the amplitude and the relaxation time of the membrane thickness fluctuations, implying a potential for independent control of these two key parameters.

Protein Resistance Driven by Polymer Nanoarchitecture.

We report that the nanometer-scale architecture of polymer chains plays a crucial role in its protein resistant property over surface chemistry. Protein-repellent (noncharged), few nanometer thick polymer layers were designed with homopolymer chains physisorbed on solids. We evaluated the antifouling property of the hydrophilic or hydrophobic adsorbed homopolymer chains against bovine serum albumin in water. Molecular dynamics simulations along with sum frequency generation spectroscopy data revealed the self-organized nanoarchitecture of the adsorbed chains composed of inner nematic-like ordered segments and outer brush-like segments across homopolymer systems with different interactions among a polymer, substrate, and interfacial water. We propose that this structure acts as a dual barrier against protein adsorption.

Flattening Process of Polymer Chains Irreversibly Adsorbed on a Solid.

We report the structural relaxation process of irreversibly adsorbed polymer chains via thermal annealing that lie flat on a solid ("flattened chains"). Amorphous polystyrene and quartz, which together constitute a weakly attractive system, was used as a model where the local chain conformations of the flattened chains were investigated by sum frequency generation spectroscopy (SFG). Two different film preparation processes (i.e., spin coating and dip coating methods) were utilized to create different initial chain conformations. The spin-coated and dip-coated PS thin films were annealed at a temperature far above the bulk glass transition temperature to reach the "quasiequilibrium" state and subsequently rinsed with chloroform to uncover the buried flattened chains. The SFG results revealed that the backbone chains (constituted of CH and CH2 groups) of the flattened PS chains preferentially orient to the weakly interactive substrate surface via thermal annealing regardless of the initial chain conformations, while the orientation of the phenyl rings becomes randomized. We postulate that increasing the number of surface-segmental contacts (i.e., enthalpic gain) is the driving force for the flattening process of the polymer chains, even onto a weakly interactive solid to overcome the conformational entropy loss in the total free energy.