[Application of nonaqueous capillary electrophoresis for chiral pharmaceutical and biomedical analysis ]. / Applications de l'électrophorèse capillaire en milieu non aqueux en analyse chirale pharmaceutique et biomedicale.

The potentialities of nonaqueous capillary electrophoresis for chiral analysis were demonstrated through many pharmaceutical and biomedical applications, such as the stereoselective assay of acidic and basic drugs in plasma and urine as well as in vitro metabolism studies. A fundamental aspect of the quality control of chiral drugs in single-isomer forms, i.e. the enantiomeric purity determination, was also investigated. Moreover, the mechanisms of intermolecular interactions involved in the chiral separations observed in nonaqueous systems were elucidated using nuclear magnetic resonance.

Insulin aggregation assessment by capillary gel electrophoresis without sodium dodecyl sulfate: Comparison with size-exclusion chromatography.

Size-exclusion chromatography (SEC) is a method of choice for the analysis of protein aggregates in pharmaceuticals. The United States and European Pharmacopoeias currently use a SEC method with an acidic pH mobile phase to assess the content of aggregates in insulin formulations. In this article, we analyzed aggregated human insulin samples and demonstrated that both methods under neutral conditions, namely neutral pH SEC (nSEC) and capillary gel electrophoresis (CGE), yield to similar aggregate content contrary to SEC under acidic conditions (aSEC). aSEC showed polymeric complexes that were not observed in nSEC and CGE. During method development, the effect on SEC profiles of arginine and acetonitrile were highlighted. In CGE, the effect of SDS on disruption of non-covalent insulin aggregates was confirmed and the benefit of sodium deoxycholate addition in sieving gel was discussed. The three methods were applied to the analysis of an insulin formulation and similar results to those obtained for human insulin as raw material were observed. Finally, the CGE method was used to study the stability of human insulin under different storage conditions. In view of the obtained results one may question the relevance of the current pharmacopoeia method to study insulin aggregates by emphasizing the importance of the mobile phase composition and pH in SEC. The new CGE method developed is an easy method for studying non-covalent aggregates of insulin, which could be applied to other proteins.

Validation of a nonaqueous capillary electrophoretic method for the enantiomeric purity determination of R-flurbiprofen using a single-isomer amino cyclodextrin derivative.

Nonaqueous capillary electrophoresis (NACE) was successfully applied to the enantiomeric purity determination of R-flurbiprofen using 6-monodeoxy-6-mono(2-hydroxy)propylamino-beta-cyclodextrin (IPA-beta-CD) as chiral selector. The nonaqueous BGE was made up of 20 mM IPA-beta-CD, 20 mM ammonium camphorsulfonate and 40 mM ammonium acetate in methanol. Flufenamic acid was selected as internal standard. The CE method was carefully optimized in order to prevent the adsorption of the cationic CD onto the capillary wall, and therefore, to avoid loss of peak efficiency and enantioresolution. To achieve this goal, the addition of ammonium camphorsulfonate was found to be necessary. In the selected conditions, the determination of 0.1% of S-flurbiprofen in R-flurbiprofen could be performed using the method of standard additions. The NACE method was then fully validated by applying a novel strategy using accuracy profiles.

Robustness testing of a chiral NACE method for R-timolol determination in S-timolol maleate and uncertainty assessment from quantitative data.

A robustness test of a capillary electrophoresis method for the chiral separation of timolol in nonaqueous acidified media was performed. A two-level Plackett-Burman design was applied in which one qualitative and six quantitative factors were examined. Resolution, migration times and relative migration times to pyridoxine (selected as internal standard) were examined as qualitative responses to evaluate electrophoretic performance. A quantitative response, the content of R-timolol in S-timolol maleate sample, was also considered. Even though some significant factor effects were observed on the qualitative responses, it was still possible to quantify the R-timolol in the S-timolol maleate samples properly. The quantitative response was not significantly affected by the selected factors, demonstrating the robustness of the procedure. However, the use of different HDMS-beta-CD batches seemed to affect both types of responses necessitating to introduce a warning in the procedure. Since the experiments of the Plackett-Burman design can be assimilated to laboratories in an interlaboratory study, uncertainty can be evaluated using the robustness test data. The robustness test was set-up in such a way that the required variances could be estimated.

Partial filling affinity capillary electrophoresis as a useful tool for fragment-based drug discovery: A proof of concept on thrombin.

With the emergence of more challenging targets, a relatively new approach, fragment-based drug discovery (FBDD), proved its efficacy and gained increasing importance in the pharmaceutical industry. FBDD identifies low molecular-weight (MW) ligands (fragments) that bind to biologically important macromolecules, then a structure-guided fragment growing or merging approach is performed, contributing to the quality of the lead. However, to select the appropriate fragment to be evolved, sensitive analytical screening methods must be used to measure the affinity in the µM or even mM range. In this particular context, we developed a robust and selective partial filling affinity CE (ACE) method for the direct binding screening of a small fragment library in order to identify new thrombin inhibitors. To demonstrate the accuracy of our assay, the complex dissociation constants of three known thrombin inhibitors, namely benzamidine, p-aminobenzamidine and nafamostat were determined and found to be in good concordance with the previously reported values. Finally, the screening of a small library was performed and demonstrated the high discriminatory power of our method towards weak binders compared to classical spectrophotometric activity assay, proving the interest of our method in the context of FBDD.

Enantioselective capillary electrophoresis-mass spectrometry of amino acids in cerebrospinal fluid using a chiral derivatizing agent and volatile surfactant.

The sensitivity of coupled enantioselective capillary electrophoresis-mass spectrometry (CE-MS) of amino acids (AAs) is often hampered by the chiral selectors in the background electrolyte (BGE). A new method is presented in which the use of a chiral selector is circumvented by employing (+)-1-(9-fluorenyl)ethyl chloroformate (FLEC) as chiral AA derivatizing agent and ammonium perfluorooctanoate (APFO) as a volatile pseudostationary phase for separation of the formed diastereomers. Efficient AA derivatization with FLEC was completed within 10 min. Infusion experiments showed that the APFO concentration hardly affects the MS response of FLEC-AAs and presents significantly less ion suppression than equal concentrations of ammonium acetate. The effect of the pH and APFO concentration of the BGE and the capillary temperature were studied in order to achieve optimized enantioseparation. Optimization of CE-MS parameters, such as sheath-liquid composition and flow rate, ESI and MS settings was performed in order to prevent analyte fragmentation and achieve sensitive detection. Selective detection and quantification of 14 chiral proteinogenic AAs was achieved with chiral resolution between 1.2 and 8.6, and limits of detection ranging from 130 to 630 nM injected concentration. Aspartic acid and glutamic acid were detected, but not enantioseparated. The optimized method was applied to the analysis of chiral AAs in cerebrospinal fluid (CSF). Good linearity (R(2) > 0.99) and acceptable peak area and electrophoretic mobility repeatability (RSDs below 21% and 2.4%, respectively) were achieved for the chiral proteinogenic AAs, with sensitivity and chiral resolution mostly similar to obtained for standard solutions. Next to l-AAs, endogenous levels of d-serine and d-glutamine could be measured in CSF revealing enantiomeric ratios of 4.8%-8.0% and 0.34%-0.74%, respectively, and indicating the method's potential for the analysis of low concentrations of d-AAs in presence of abundant l-AAs.

Separation, identification and quantitation of ceramides in human cancer cells by liquid chromatography-electrospray ionization tandem mass spectrometry.

Ceramides are important intracellular second messengers that play a role in the regulation of cell growth, differentiation and programmed cell death. Qualitative and quantitative analysis of these second messengers requires sensitive and specific analytical methods to detect endogenous levels of individual ceramide species and to differentiate between them. Nine synthetic ceramides were separated by liquid chromatography coupled to tandem mass spectrometry on a C18 bonded silica column. The lipids were eluted in gradient elution mode using a mixture of water, acetonitrile and 2-propanol as mobile phase. They were detected by reaction monitoring performed on positive ion electrospray generated ions. Collision-induced fragmentations conducted on ceramides produced a well characteristic product ion at m/z 264, making multiple reaction monitoring (MRM) well suited for various ceramides quantitative measurements. After optimization of the extraction step, the proposed methodology was able to identify and quantify different ceramide species issued from human cancer cells. The method could be validated for C16, C18 and C20 ceramides, quantified at the nanogram level. The validation exhibits good results with respect to linearity, accuracy and precision.

Influence of sample and mobile phase composition on peptide retention behaviour and sensitivity in reversed-phase liquid chromatography/mass spectrometry.

Because the chromatographic behaviour of peptides is totally different from that of small molecules, a good understanding of the mechanisms that occur from injection to detection in reversed-phase LC-MS is strongly recommended to successfully develop not only qualitative but also quantitative methods. In this study, design of experiments was used in order to investigate the influence of the experimental parameters, i.e. sample and mobile phase composition, on a peptide mixture covering a wide range of molecular weights, isoelectric points and hydropathies. First, a screening design was developed to identify the significant factors concerning mobile phase (ion-pairing reagent nature and concentration) and sample composition (organic modifier proportion and ion-pairing reagent nature) on retention and response intensity (sensitivity). Then, after having selected the experimental domain and the significant factors, a full factorial design was used to further investigate the role of the considered factors and their interactions. Interestingly, ion-pairing reagent nature present in the sample had a tremendous effect on retention and response intensity. Optimal conditions leading to good sensitivity and adequate peptide retention without band splitting were selected and could be used as starting point for rapid method development using classical solvents and ion-pairing reagents.

Optimization of the liquid chromatography enantioseparation of chiral acidic compounds using cellulose tris(3-chloro-4-methylphenylcarbamate) as chiral selector and polar organic mobile phases.

The LC enantioseparation of chiral acidic and zwitterionic drugs selected as model compounds was optimized using chlorine containing cellulose based chiral stationary phases and polar organic mobile phases. The main solvent of the mobile phase was acetonitrile, the temperature was settled at 25°C and a stationary phase with cellulose tris(3-chloro-4-methylphenylcarbamate) as chiral selector (3-Cl-4-Me-PC) was selected. In the screening step, the nature and concentration of both acidic and basic additives were found to have a significant effect on retention, selectivity and resolution. Acetic acid (AcA) was selected as acidic additive for the optimization step since it could lead to the enantioseparation of more acidic compounds than trifluoroacetic acid (TFA) and formic acid (FA), while among the three basic additives tested, diethylamine (DEA) most often gave better results with respect to enantioresolution and selectivity than butylamine (BuA) and triethylamine (TEA). The optimization was performed using a central composite face-centered design with two factors, namely the concentration of acetic acid (0.1-0.3%) and the concentration of DEA (0.01-0.1%) in the mobile phase. On the basis of the results obtained in the screening and optimization steps, a strategy for the rapid development of methods for the enantioseparation of acidic or neutral compounds was proposed.

Development and validation of a LC method for the enantiomeric purity determination of S-ropivacaine in a pharmaceutical formulation using a recently commercialized cellulose-based chiral stationary phase and polar non-aqueous mobile phase.

Ropivacaine is the first enantiomerically pure long-acting local anaesthetic used for surgical anaesthesia and post-operative pain relief. A liquid chromatographic (LC) method using acetonitrile as the main solvent and cellulose tris(4-chloro-3-methylphenylcarbamate) coated on silica as chiral stationary phase was successfully developed and applied for the enantiomeric purity determination of S-ropivacaine in a pharmaceutical formulation (Naropin(®)). The key role played by the acidic additive (trifluoroacetic acid or formic acid) in the enantioseparation of basic drugs in these LC systems was demonstrated by the reversal of ropivacaine enantiomers elution order observed when both acids were compared. In order to elute the enantiomeric impurity (R-ropivacaine) before S-ropivacaine, formic acid (FA) was selected. The temperature and the percentages of acidic additive and hexane in the mobile phase were found to significantly influence the retention and resolution of these enantiomers. The optimized mobile phase consisted of ACN/0.1% DEA/0.2% FA/5% hexane (v/v/v/v). The temperature was set at 35°C to avoid the interference from a peak system related to the presence of water in the sample on ropivacaine enantiomers. The LC method was then fully validated applying the strategy based on total measurement error and accuracy profiles. The accuracy profile obtained by linear regression after square root transformation was selected, the acceptance limits being settled at ±10% for the intended use of this analytical method. The relative bias was lower than 1.5%, while the RSD values for repeatability and intermediate precision were both below 1.0%. The limit of detection (LOD) and the limit of quantification (LOQ) were found to be about 0.2 and 1.0 µg/mL, respectively, corresponding to 0.02 and 0.1% of the enantiomeric impurity in S-ropivacaine.