Characterization of sciatic nerve myelin sheath during development in C57BL/6 mice.

Myelin sheath plays important roles in information conduction and nerve injury repair in the peripheral nerve system (PNS). Enhancing comprehension of the structure and components of the myelin sheath in the PNS during development would contribute to a more comprehensive understanding of the developmental and regenerative processes. In this research, the structure of sciatic nerve myelin sheath in C57BL/6 mice from embryonic day 14 (E14) to postnatal 12 months (12M) was observed with transmission electron microscopy. Myelin structure appeared in the sciatic nerve as early as E14, and the number and thickness of myelin lamellar gradually increased with the development until 12M. Transcriptome analysis was performed to show the expressions of myelin-associated genes and transcriptional factors involved in myelin formation. The genes encoding myelin proteins (Mag, Pmp22, Mpz, Mbp, Cnp and Prx) showed the same expression pattern, peaking at postnatal day 7 (P7) and P28 after birth, whereas the negative regulators of myelination (c-Jun, Tgfb1, Tnc, Cyr61, Ngf, Egr1, Hgf and Bcl11a) showed an opposite expression pattern. In addition, the expression of myelin-associated proteins and transcriptional factors was measured by Western blot and immunofluorescence staining. The protein expressions of MAG, PMP22, MPZ, CNPase and PRX increased from E20 to P14. The key transcriptional factor c-Jun co-localized with the Schwann cells Marker S100ß and decreased after birth, whereas Krox20/Egr2 increased during development. Our data characterized the structure and components of myelin sheath during the early developmental stages, providing insights for further understanding of PNS development.

Effects of Semaphorin3A on the growth of sensory and motor neurons.

After peripheral nerve injury, motor and sensory axons can regenerate, but the inaccurate reinnervation of the target leads to poor functional recovery. Schwann cells (SCs) express sensory and motor phenotypes associated with selective regeneration. Semaphorin 3A (Sema3A) is an axonal chemorepellent that plays an essential role in axon growth. SCs can secret Sema3A, and Sema3A presents a different expression pattern at the proximal and distal ends of injured sensory and motor nerves. Hence, in our study, the protein expression and secretion of Sema3A in sensory and motor SCs and the expression of its receptor Neuropilin-1 (Nrp1) in dorsal root ganglia (DRG) sensory neurons (SNs) and spinal cord motor neurons (MNs) were detected by Western blot and ELISA. The effect of Sema3A at different concentrations on neurite growth of sensory and motor neurons was observed by immunostaining. Also, by blocking the Nrp1 receptor on neurons, the effect of Sema3A on neurite growth was observed. Finally, we observed the neurite growth of sensory and motor neurons cocultured with Sema3A siRNA transfected SCs by immunostaining. The results suggested that the expression and secretion of Sema3A in sensory SCs are more significant than that in motor SCs, and the expression of its receptor Nrp1 in SNs is higher than in MNs. Sema3A could inhibit the neurite growth of sensory and motor neurons via Nrp1, and Sema3A has a more substantial effect on the neurite growth of SNs. These data provide evidence that SC-secreted Sema3A might play a role in selective regeneration by a preferential effect on SNs.

Counting d-Orbital Vacancies of Transition-Metal Catalysts for the Sulfur Reduction Reaction.

The electrocatalytic sulfur reduction reaction (SRR) would allow the production of renewable high-capacity rechargeable lithium-sulfur (Li-S) batteries using sustainable and nontoxic elemental sulfur as a cathode material, but its slow reaction rate causes a serious shuttle effect and dramatically reduces the capacity. We found that a catalyst composed of Pd nanoparticles supported by ordered mesoporous carbon (Pd/OMC) had a high reaction rate in the SRR, and a Li-S battery assembled with this catalyst had a low shuttle constant of 0.031 h-1 and a high-rate performance with a specific capacity of 1527 mAh g-1 at 0.1 C which is close to the theoretical value. The high activity of Pd/OMC with a d-orbital vacancy of 0.87 e was predicted from a volcano relationship between the d charge for the metal and the adsorption activation entropy and reaction rate for the SRR by examining Pd, Au, Pt, Rh, and Ru transition-metal nanocatalysts. The strategy of using a single electronic structure descriptor to design high-efficiency SRR catalysts has suggested a way to produce practical Li-S batteries.

The acetylome of adult mouse sciatic nerve.

Lysine acetylation is a reversible post-translational modification (PTM) involved in multiple physiological functions. Recent studies have demonstrated the involvement of protein acetylation in modulating the biology of Schwann cells (SCs) and regeneration of the peripheral nervous system (PNS). However, the mechanisms underlying these processes remain partially understood. Here, we characterized the acetylome of the mouse sciatic nerve (SN) and investigated the cellular distribution of acetylated proteins. We identified 483 acetylated proteins containing 1442 acetylation modification sites in the SN of adult C57BL/6 mice. Bioinformatics suggested that these acetylated SN proteins were mainly located in the myelin sheath, mitochondrial inner membrane, and cytoskeleton, and highlighted the significant differences between the mouse SN and brain acetylome. Manual annotation further indicated that most acetylated proteins (> 45%) were associated with mitochondria, energy metabolism, and cytoskeleton and cell adhesion. We verified three newly discovered acetylation-modified proteins, including neurofilament light polypeptide (NEFL), neurofilament medium/high polypeptide (NFM/H), and periaxin (PRX). Immunofluorescence illustrated that the acetylated proteins, including acetylated alpha-tubulin, were mainly co-localized with S100-positive SCs. Herein, we provided a comprehensive acetylome for the mouse SN and demonstrated that acetylated proteins in the SN were predominantly located in SCs. These results will extend our understanding and promote further study of the role and mechanism of protein acetylation in SC development and PNS regeneration.

A Review of Compact Carbon Design for Supercapacitors with High Volumetric Performance.

Volumetric performance is of great importance in today's energy storage devices, and is used to evaluate their competitiveness in the markets of miniaturized electronic devices and space-constrained electric vehicles. Supercapacitors suffer from a low volumetric energy density in spite of their high power and long cycle life because of their use of porous but low-density carbons. This review considers compact carbon design strategies for high volumetric performance supercapacitors based on four key electrode parameters: density, thickness, gravimetric capacitance, and nonactive components. A guide is provided for constructing a conductive additive-/binder-free self-supported ultrathick, dense electrode to maximize the volumetric energy density. The research status of emerging micro-supercapacitors and hybrid supercapacitors is then briefly discussed, emphasizing the importance of their volumetric performance and the opportunities as well as challenges they face in the trendy Internet of things applications or larger device systems.

Astragaloside IV Improves Muscle Atrophy by Modulating the Activity of UPS and ALP via Suppressing Oxidative Stress and Inflammation in Denervated Mice.

Peripheral nerve injury is common clinically and can lead to neuronal degeneration and atrophy and fibrosis of the target muscle. The molecular mechanisms of muscle atrophy induced by denervation are complex and not fully understood. Inflammation and oxidative stress play an important triggering role in denervated muscle atrophy. Astragaloside IV (ASIV), a monomeric compound purified from astragalus membranaceus, has antioxidant and anti-inflammatory properties. The aim of this study was to investigate the effect of ASIV on denervated muscle atrophy and its molecular mechanism, so as to provide a new potential therapeutic target for the prevention and treatment of denervated muscle atrophy. In this study, an ICR mouse model of muscle atrophy was generated through sciatic nerve dissection. We found that ASIV significantly inhibited the reduction of tibialis anterior muscle mass and muscle fiber cross-sectional area in denervated mice, reducing ROS and oxidative stress-related protein levels. Furthermore, ASIV inhibits the increase in inflammation-associated proteins and infiltration of inflammatory cells, protecting the denervated microvessels in skeletal muscle. We also found that ASIV reduced the expression levels of MAFbx, MuRF1 and FoxO3a, while decreasing the expression levels of autophagy-related proteins, it inhibited the activation of ubiquitin-proteasome and autophagy-lysosome hydrolysis systems and the slow-to-fast myofiber shift. Our results show that ASIV inhibits oxidative stress and inflammatory responses in skeletal muscle due to denervation, inhibits mitophagy and proteolysis, improves microvascular circulation and reverses the transition of muscle fiber types; Therefore, the process of skeletal muscle atrophy caused by denervation can be effectively delayed.

Hydroiodic-Acid-Initiated Dense yet Porous Ti3 C2 Tx MXene Monoliths toward Superhigh Areal Energy Storage.

The assembly of 3D structured materials from 2D units paves a royal road for building thick and dense electrodes, which are long sought after for practical energy-storage devices. 2D transitional metal carbides (MXene) are promising for this due to their capabilities of solution-based assembly and intrinsic high density, yet face huge challenges in yielding high areal capacitance electrodes owing to the absence of porous ion-transport paths. Here, a gelation-densification process initiated by hydroiodide acids (HI) is proposed, where the protons break the electrostatic balance of MXene nanosheets to trigger gelation, while HI serves as a spacer to prevent nanosheets from restacking during capillary shrinkage. More promising, the controlled evaporation of reductive HI leaves superiorly shrinking yet porous network for ion transport, and the produced monoliths exhibit a high density of 2.74 g cm-3 and an unprecedented areal capacitance of 18.6 F cm-2 .

Recent advances and perspectives of CeO2-based catalysts: Electronic properties and applications for energy storage and conversion.

Cerium dioxide (CeO2, ceria) has long been regarded as one of the key materials in modern catalysis, both as a support and as a catalyst itself. Apart from its well-established use (three-way catalysts and diesel engines), CeO2 has been widely used as a cocatalyst/catalyst in energy conversion and storage applications. The importance stems from the oxygen storage capacity of ceria, which allows it to release oxygen under reducing conditions and to store oxygen by filling oxygen vacancies under oxidizing conditions. However, the nature of the Ce active site remains not well understood because the degree of participation of f electrons in catalytic reactions is not clear in the case of the heavy dependence of catalysis theory on localized d orbitals at the Fermi energy E F . This review focuses on the catalytic applications in energy conversion and storage of CeO2-based nanostructures and discusses the mechanisms for several typical catalytic reactions from the perspectives of electronic properties of CeO2-based nanostructures. Defect engineering is also summarized to better understand the relationship between catalytic performance and electronic properties. Finally, the challenges and prospects of designing high efficiency CeO2-based catalysts in energy storage and conversion have been emphasized.

Roles of Metal Ions in MXene Synthesis, Processing and Applications: A Perspective.

With a decade of effort, significant progress has been achieved in the synthesis, processing, and applications of MXenes. Metal ions play many crucial roles, such as in MXene delamination, structure regulation, surface modification, MXene composite construction, and even some unique applications. The different roles of metal ions are attributed to their many interactions with MXenes and the unique nature of MXenes, including their layered structure, surface chemistry, and the existence of multi-valent transition metals. Interactions with metal ions are crucial for the energy storage of MXene electrodes, especially in metal ion batteries and supercapacitors with neutral electrolytes. This review aims to provide a good understanding of the interactions between metal ions and MXenes, including the classification and fundamental chemistry of their interactions, in order to achieve their more effective utilization and rational design. It also provides new perspectives on MXene evolution and exfoliation, which may suggest optimized synthesis strategies. In this respect, the different effects of metal ions on MXene synthesis and processing are clarified, and the corresponding mechanisms are elaborated. Research progress on the roles metal ions have in MXene applications is also introduced.

The Assembly of MXenes from 2D to 3D.

Since their discovery in 2011, transition metal carbides or nitrides (MXenes) have attracted a wide range of attention due to their unique properties and promise for use in a variety of applications. However, the low accessible surface area and poor processability of MXene nanosheets caused by their restacking have severely hindered their practical use, and this is expected to be solved by integrating them into macroscopic assemblies. Here, recent progress in the construction of MXene assemblies from 2D to 3D at the macro and/or microlevel is summarized. The mechanisms of their assembly are also discussed to better understand the relationship between performance and assembled structure. The possible uses of MXene assemblies in energy conversion and storage, electromagnetic interference shielding and absorption, and other applications are summarized.

Packing Activated Carbons into Dense Graphene Network by Capillarity for High Volumetric Performance Supercapacitors.

Supercapacitors are increasingly in demand among energy storage devices. Due to their abundant porosity and low cost, activated carbons are the most promising electrode materials and have been commercialized in supercapacitors for many years. However, their low packing density leads to an unsatisfactory volumetric performance, which is a big obstacle for their practical use where a high volumetric energy density is necessary. Inspired by the dense structure of irregular pomegranate grains, a simple yet effective approach to pack activated carbons into a compact graphene network with graphene as the "peels" is reported here. The capillary shrinkage of the graphene network sharply reduces the voids between the activated carbon particles through the microcosmic rearrangement while retaining their inner porosity. As a result, the electrode density increases from 0.41 to 0.76 g cm-3. When used as additive-free electrodes for supercapacitors in an ionic liquid electrolyte, this porous yet dense electrode delivers a volumetric capacitance of up to 138 F cm-3, achieving high gravimetric and volumetric energy densities of 101 Wh kg-1 and 77 Wh L-1, respectively. Such a graphene-assisted densification strategy can be extended to the densification of other carbon or noncarbon particles for energy devices requiring a high volumetric performance.

Fast Gelation of Ti3 C2 Tx MXene Initiated by Metal Ions.

Gelation is an effective way to realize the self-assembly of nanomaterials into different macrostructures, and in a typical use, the gelation of graphene oxide (GO) produces various graphene-based carbon materials with different applications. However, the gelation of MXenes, another important type of 2D materials that have different surface chemistry from GO, is difficult to achieve. Here, the first gelation of MXenes in an aqueous dispersion that is initiated by divalent metal ions is reported, where the strong interaction between these ions and OH groups on the MXene surface plays a key role. Typically, Fe2+ ions are introduced in the MXene dispersion which destroys the electrostatic repulsion force between the MXene nanosheets in the dispersion and acts as linkers to bond the nanosheets together, forming a 3D MXene network. The obtained hydrogel effectively avoids the restacking of the MXene nanosheets and greatly improves their surface utilization, resulting in a high rate performance when used as a supercapacitor electrode (≈226 F g-1 at 1 V s-1 ). It is believed that the gelation of MXenes indicates a new way to build various tunable MXene-based structures and develop different applications.