The magnetic properties of MAl4(OH)12SO4·3H2O with M = Co2+, Ni2+, and Cu2+ determined by a combined experimental and computational approach.

The magnetic properties of the nickelalumite-type layered double hydroxides (LDH), MAl4(OH)12(SO4)·3H2O (MAl4-LDH) with M = Co2+ (S = 3/2), Ni2+ (S = 1), or Cu2+ (S = 1/2) were determined by a combined experimental and computational approach. They represent three new inorganic, low-dimensional magnetic systems with a defect-free, structurally ordered magnetic lattice. They exhibit no sign of magnetic ordering down to 2 K in contrast to conventional hydrotalcite LDH. Detailed insight into the complex interplay between the choice of magnetic ion (M2+) and magnetic properties was obtained by a combination of magnetic susceptibility, heat capacity, neutron scattering, solid-state NMR spectroscopy, and first-principles calculations. The NiAl4- and especially CoAl4-LDH have pronounced zero-field splitting (ZFS, easy-axis and easy-plane, respectively) and weak ferromagnetic nearest-neighbour interactions. Thus, they are rare examples of predominantly zero-dimensional spin systems in dense, inorganic matrices. In contrast, CuAl4-LDH (S = 1/2) consists of weakly ferromagnetic S = 1/2 spin chains. For all three MAl4-LDH, good agreement is found between the experimental magnetic parameters (J, D, g) and first-principles quantum chemical calculations, which also predict that the interchain couplings are extremely weak (< 0.1 cm-1). Thus, our approach will be valuable for evaluation and prediction of magnetic properties in other inorganic materials.

HoHO: A Paramagnetic Air-Resistant Ionic Hydride with Ordered Anions.

The substitution of hydrogen for oxygen atoms in metal oxides provides opportunities for influencing the solid-state properties. Such hydride oxides (or oxyhydrides) are potential functional materials and scarce. Here, we present the synthesis and characterization of holmium hydride oxide with the stoichiometric composition HoHO. It was prepared by the reaction of Ho2O3 with either HoH3 or CaH2 as a powder of light-yellow color in sunlight and pink color in artificial light (Alexandrite effect), which is commonly observed for ionic Ho(III) compounds. HoHO crystallizes with an ordered fluorite superstructure (F4̅3m, a = 5.27550(13) Å, half-Heusler LiAlSi type), as evidenced by powder X-ray and neutron powder diffraction on both hydride and deuteride and supported by quantum-mechanical calculations. HoHO is the first representative with considerable ionic bonding for this structure type. The thermal stability and inertness toward air are remarkably high for a hydride because it reacts only above 540 K to form Ho2O3. At 294(1) K and 25(3)% relative humidity, HoHO is stable for at least 3 months. HoHO is paramagnetic with µeff(Ho3+) = 10.41(2) µB without any sign of magnetic ordering down to 2 K.

Correlation between Oxygen Vacancies and Oxygen Evolution Reaction Activity for a Model Electrode: PrBaCo2 O5+δ.

The role of the perovskite lattice oxygen in the oxygen evolution reaction (OER) is systematically studied in the PrBaCo2 O5+δ family. The reduced number of physical/chemical variables combined with in-depth characterizations such as neutron dif-fraction, O K-edge X-ray absorption spectroscopy (XAS), electron energy loss spectroscopy (EELS), magnetization and scanning transmission electron microscopy (STEM) studies, helps investigating the complex correlation between OER activity and a single perovskite property, such as the oxygen content. Larger amount of oxygen vacancies appears to facilitate the OER, possibly contributing to the mechanism involving the oxidation of lattice oxygen, i.e., the lattice oxygen evolution reaction (LOER). Furthermore, not only the number of vacancies but also their local arrangement in the perovskite lattice influences the OER activity, with a clear drop for the more stable, ordered stoichiometry.

On the elusive nature of oxygen binding at coordinatively unsaturated 3d transition metal centers in metal-organic frameworks.

Using gas sorption measurements at ambient temperatures and in situ neutron powder diffraction methods, we have studied the interaction strengths and coordination geometries of O2 and N2 near the non-occupied coordination site (open metal site) in the isostructural MOF structures of the CPO-27-M/M-MOF-74 series (with M = Co, Ni, Mn and Cu). Our experimental observations are compared to periodic quantum chemical model calculations. Contrary to recent computational studies, our results, both experimental and theoretical, unequivocally suggest rather weak interactions between the M(ii) coordinatively unsaturated centers and the adsorbate molecules, being mainly dispersive and electrostatic in nature. As a consequence, they exclude significant orbital charge transfer effects that could lead to superoxide/peroxide formation. Calculated binding energies appear in good agreement with the measured isosteric heats of adsorption in the range of 10-20 kJ mol-1. These, relatively weak host-guest interactions, lead to a tilted end-on geometry in all of the investigated M(ii)-guest molecule adducts.

Low-Temperature Cationic Rearrangement in a Bulk Metal Oxide.

Cationic rearrangement is a compelling strategy for producing desirable physical properties by atomic-scale manipulation. However, activating ionic diffusion typically requires high temperature, and in some cases also high pressure in bulk oxide materials. Herein, we present the cationic rearrangement in bulk Mn2 FeMoO6 at unparalleled low temperatures of 150-300 (o) C. The irreversible ionic motion at ambient pressure, as evidenced by real-time powder synchrotron X-ray and neutron diffraction, and second harmonic generation, leads to a transition from a Ni3 TeO6 -type to an ordered-ilmenite structure, and dramatic changes of the electrical and magnetic properties. This work demonstrates a remarkable cationic rearrangement, with corresponding large changes in the physical properties in a bulk oxide at unprecedented low temperatures.

Localization and impact of Pb-non-bonded electronic pair on the crystal and electronic structure of Pb2YSbO6.

The synthesis and crystal structure evolution of the double perovskite Pb2YSbO6 is reported for the first time. The structure has been analyzed in the temperature range between 100 and 500 K by using a combination of synchrotron and neutron powder diffraction. This compound shows two consecutive first order phase transformations as previously observed for a subgroup of Pb2RSbO6 perovkites (R = rare earths). The thermodynamic parameters associated with the phase transitions were calculated using differential scanning calorimetry (DSC), and the role of the diverse cations of the structure was studied from DFT calculations for the room temperature polymorph. The crystal structure evolves from a C2/c monoclinic structure (a(-)b(-)b(-) tilting system in Glazer's notation) to another monoclinic P2(1)/n (a(-)a(-)b(+)) phase with an incommensurate modulation and finally to a cubic Fm3m perovskite (a(0)a(0)a(0)). The highly distorted nature of the room temperature crystal structure seems to be driven by the polarization of the Pb lone pair which shows a marked local effect in the atomic spatial arrangements. Moreover, the lone pairs have been localized from DFT calculations and show an antiferroelectric ordering along the b monoclinic axis.

Anion-π and halide-halide nonbonding interactions in a new ionic liquid based on imidazolium cation with three-dimensional magnetic ordering in the solid state.

We present the first magnetic phase of an ionic liquid with anion-π interactions, which displays a three-dimensional (3D) magnetic ordering below the Néel temperature, TN = 7.7 K. In this material, called Dimim[FeBr4], an exhaustive and systematic study involving structural and physical characterization (synchrotron X-ray, neutron powder diffraction, direct current and alternating current magnetic susceptibility, magnetization, heat capacity, Raman and Mössbauer measurements) as well as first-principles analysis (density functional theory (DFT) simulation) was performed. The crystal structure, solved by Patterson-function direct methods, reveals a monoclinic phase (P21 symmetry) at room temperature with a = 6.745(3) Å, b = 14.364(3) Å, c = 6.759(3) Å, and ß = 90.80(2)°. Its framework, projected along the b direction, is characterized by layers of cations [Dimim](+) and anions [FeBr4](-) that change the orientation from layer to layer, with Fe···Fe distances larger than 6.7 Å. Magnetization measurements show the presence of 3D antiferromagnetic ordering below TN with the existence of a noticeable magneto-crystalline anisotropy. From low-temperature neutron diffraction data, it can be observed that the existence of antiferromagnetic order is originated by the antiparallel ordering of ferromagnetic layers of [FeBr4](-) metal complex along the b direction. The magnetic unit cell is the same as the chemical one, and the magnetic moments are aligned along the c direction. The DFT calculations reflect the fact that the spin density of the iron ions spreads over the bromine atoms. In addition, the projected density of states (PDOS) of the imidazolium with the bromines of a [FeBr4](-) metal complex confirms the existence of the anion-π interaction. Magneto-structural correlations give no evidence for direct iron-iron interactions, corroborating that the 3D magnetic ordering takes place via superexchange coupling, the Fe-Br···Br-Fe interplane interaction being defined as the main exchange pathway.

Cobalt-free layered perovskites RBaCuFeO5+δ (R = 4f lanthanide) as electrocatalysts for the oxygen evolution reaction.

Co-based perovskite oxides are intensively studied as promising catalysts for electrochemical water splitting in an alkaline environment. However, the increasing Co demand by the battery industry is pushing the search for Co-free alternatives. Here we report a systematic study of the Co-free layered perovskite family RBaCuFeO5+δ (R = 4f lanthanide), where we uncover the existence of clear correlations between electrochemical properties and several physicochemical descriptors. Using a combination of advanced neutron and X-ray synchrotron techniques with ab initio DFT calculations we demonstrate and rationalize the positive impact of a large R ionic radius in their oxygen evolution reaction (OER) activity. We also reveal that, in these materials, Fe3+ is the transition metal cation the most prone to donate electrons. We also show that similar R3+/Ba2+ ionic radii favor the incorporation and mobility of oxygen in the layered perovskite structure and increase the number of available O diffusion paths, which have an additional, positive impact on both, the electric conductivity and the OER process. An unexpected result is the observation of a clear surface reconstruction exclusively in oxygen-rich samples (δ > 0), a fact that could be related to their superior OER activity. The encouraging intrinsic OER values obtained for the most active electrocatalyst (LaBaCuFeO5.49), together with the possibility of industrially producing this material in nanocrystalline form should inspire the design of other Co-free oxide catalysts with optimal properties for electrochemical water splitting.

In Situ Neutron Diffraction of Zn-MOF-74 Reveals Nanoconfinement-Induced Effects on Adsorbed Propene.

Even though confinement was identified as a common element of selective catalysis and simulations predicted enhanced properties of adsorbates within microporous materials, experimental results on the characterization of the adsorbed phase are still rare. In this study, we provide experimental evidence of the increase of propene density in the channels of Zn-MOF-74 by 16(2)% compared to the liquid phase. The ordered propene molecules adsorbed within the pores of the MOF have been localized by in situ neutron powder diffraction, and the results are supported by adsorption studies. The formation of a second adsorbate layer, paired with nanoconfinement-induced short intermolecular distances, causes the efficient packing of the propene molecules and results in an increase of olefin density.

Highly Reversible Ti/Sn Oxide Nanocomposite Electrodes for Lithium Ion Batteries Obtained by Oxidation of Ti3 Al(1-x) Snx C2 Phases.

Among the materials for the negative electrodes in Li-ion batteries, oxides capable of reacting with Li+ via intercalation/conversion/alloying are extremely interesting due to their high specific capacities but suffer from poor mechanical stability. A new way to design nanocomposites based on the (Ti/Sn)O2 system is the partial oxidation of the tin-containing MAX phase of Ti3 Al(1-x) Snx O2 composition. Exploiting this strategy, this work develops composite electrodes of (Ti/Sn)O2 and MAX phase capable of withstanding over 600 cycles in half cells with charge efficiencies higher than 99.5% and specific capacities comparable to those of graphite and higher than lithium titanate (Li4 Ti5 O12 ) or MXenes electrodes. These unprecedented electrochemical performances are also demonstrated at full cell level in the presence of a low cobalt content layered oxide and explained through an accurate chemical, morphological, and structural investigation which reveals the intimate contact between the MAX phase and the oxide particles. During the oxidation process, electroactive nanoparticles of TiO2 and Ti(1-y) Sny O2 nucleate on the surface of the unreacted MAX phase which therefore acts both as a conductive agent and as a buffer to preserve the mechanical integrity of the oxide during the lithiation and delithiation cycles.

High-Entropy Oxides in the Mullite-Type Structure.

High-entropy materials (HEMs) represent a new class of solid solutions containing at least five different elements. Their compositional diversity makes them promising as platforms for the development of functional materials. We synthesized new HEMs in a mullite-type structure and present five compounds, i.e., Bi2(Al0.25Ga0.25Fe0.25Mn0.25)4O9 and A2Mn4O10 with variations of A = Nd, Sm, Y, Er, Eu, Ce, and Bi, demonstrating the vast accessible composition space. By combining scattering, microscopy, and spectroscopy techniques, we show that our materials are mixed solid solutions. Remarkably, when following their crystallization in situ using X-ray diffraction and X-ray absorption spectroscopy, we find that the HEMs form through a metastable amorphous phase without the formation of any crystalline intermediates. We expect that our synthesis is excellently suited to synthesizing diverse HEMs and therefore will have a significant impact on their future exploration.

Structural Evolution of Air-Exposed Layered Oxide Cathodes for Sodium-Ion Batteries: An Example of Ni-doped NaxMnO2.

Sodium-ion batteries have recently aroused the interest of industries as possible replacements for lithium-ion batteries in some areas. With their high theoretical capacities and competitive prices, P2-type layered oxides (NaxTMO2) are among the obvious choices in terms of cathode materials. On the other hand, many of these materials are unstable in air due to their reactivity toward water and carbon dioxide. Here, Na0.67Mn0.9Ni0.1O2 (NMNO), one of such materials, has been synthesized by a classic sol-gel method and then exposed to air for several weeks as a way to allow a simple and reproducible transition toward a Na-rich birnessite phase. The transition between the anhydrous P2 to the hydrated birnessite structure has been followed via periodic XRD analyses, as well as neutron diffraction ones. Extensive electrochemical characterizations of both pristine NMNO and the air-exposed one vs sodium in organic medium showed comparable performances, with capacities fading from 140 to 60 mAh g-1 in around 100 cycles. Structural evolution of the air-exposed NMNO has been investigated both with ex situ synchrotron XRD and Raman. Finally, DFT analyses showed similar charge compensation mechanisms between P2 and birnessite phases, providing a reason for the similarities between the electrochemical properties of both materials.

Incommensurate magnetic structure of CrAs at low temperatures and high pressures.

The magnetic structure of chromium arsenide CrAs is studied with neutron powder diffraction at ambient pressure in the temperature range 1.5-300 K as well as with neutron single-crystal diffraction at 2 K and 0.12 GPa. The material undergoes an anti-isostructural phase transition at TN = 267 K and atmospheric conditions, in which both orthorhombic phases have the same space-group symmetry (Pnma, Z = 4) but different distortions of the parent hexagonal structure of the NiAs type (P63/mmc, Z = 2). The magnetic structure below TN is incommensurate with the propagation vector k = (0, 0, kc). At ambient pressure, the component kc decreases from kc = 0.3807 (7) at 260 K to kc = 0.3531 (6) at 50 K. Below this temperature, it is basically constant. With increasing pressure at 2 K, kc is also constant within standard uncertainties [kc = 0.353 (2)]. For the analysis of the magnetic structure, a group-theoretical approach based on the space group of the nuclear structure and its subgroups is used. To avoid falling into false minima in the refinements, a random search for magnetic moments in the models is implemented. In the literature, the magnetic structure has been determined on the basis of powder diffraction data as a double helix propagating along the c axis. Although this double-helical model leads to satisfactory agreement factors for our powder data, it does not reproduce the intensities of the magnetic satellite reflections measured on single-crystal data in a satisfactory way and can therefore be discarded. Instead, several other models are found that lead to better agreement. Each of them is spiral-like with directional components in all three directions and with no spin-density wave character that would cause a non-constant magnetic moment. In all these models, the ordering of the spins is neither a pure helix nor a pure cycloid. Instead, the unit vectors of the spin rotation planes make an angle α, 0° < α < 90°, with respect to the c* direction. The model in superspace group P21.1'(α0γ)0s yields the best agreement factors in the refinements of the neutron single-crystal and powder diffraction data. This model is unique as it is the only one in which all the magnetic moments rotate with the same chirality.

Aliovalent anion substitution as a design concept for heteroanionic Ruddlesden-Popper hydrides.

Substituting 2 O2- ⇒ N3- + H- in LiLa2HO3 yields dark-brown heteroanionic hydrides, which were synthesized by solid-state reactions from Li3N, LaH3 (and La2O3). They crystallize in the K2NiF4 type structure with mixed H/N sites in LiLa2N1.5H2.5 and with mixed N/O sites in LiLa2N0.84(6)H1.56(3)O1.16(6). The latter is a semiconductor with small band gap and partly covalent Li-H interaction.

High-temperature behavior and polymorphism in novel members of the perovskite family Pb2LnSbO6 (Ln=Ho, Er, Yb, Lu).

The synthesis, crystal structure, and dielectric properties of four novel members of the family of double perovskites Pb(2)LnSbO(6) are described. The room-temperature crystal structures were refined from neutron powder diffraction (NPD) data in the monoclinic C2/c (No. 15) space group. They contain a completely ordered array of alternating LnO(6) and SbO(6) octahedra sharing corners, tilted in antiphase along the three pseudocubic axes, with a a(-)b(-)b(-) tilting scheme, which is very unusual in the crystallochemistry of perovskites. The lead atoms occupy highly asymmetric voids with 8-fold coordination due to the stereoactivity of the Pb(2+) electron lone-pair. Several trends are observed for the entire family of compounds upon heating. The Ln = Lu, Yb, and Er oxides display three successive phase transitions in a narrow temperature range, as shown by differential scanning calorimetry (DSC) data, while the Ln = Ho shows only two transitions. Different crystal structure evolutions have been found from temperature-dependent NPD and DSC, following the space-group sequence C2/c → P2(1)/n → R ̅3 → Fm ̅3m for Ln = Lu and Yb, the sequence C2/c → unknown → P2(1)/n → Fm ̅3m for Ln = Er, and C2/c → P2(1)/n → Fm ̅3m for Ln = Ho. The Ln/Sb long-range ordering is preserved across the consecutive phase transitions. Dielectric permittivity measurements indicate the presence of a paraelectric/antiferroelectric transition (associated with the last structural transition), as suggested by the negative Curie temperature from the Curie-Weiss fit of the reciprocal permittivity.

Crystal and Magnetic Structure Transitions in BiMnO3+δ Ceramics Driven by Cation Vacancies and Temperature.

The crystal structure of BiMnO3+δ ceramics has been studied as a function of nominal oxygen excess and temperature using synchrotron and neutron powder diffraction, magnetometry and differential scanning calorimetry. Increase in oxygen excess leads to the structural transformations from the monoclinic structure (C2/c) to another monoclinic (P21/c), and then to the orthorhombic (Pnma) structure through the two-phase regions. The sequence of the structural transformations is accompanied by a modification of the orbital ordering followed by its disruption. Modification of the orbital order leads to a rearrangement of the magnetic structure of the compounds from the long-range ferromagnetic to a mixed magnetic state with antiferromagnetic clusters coexistent in a ferromagnetic matrix followed by a frustration of the long-range magnetic order. Temperature increase causes the structural transition to the nonpolar orthorhombic phase regardless of the structural state at room temperature; the orbital order is destroyed in compounds BiMnO3+δ (δ ≤ 0.14) at temperatures above 470 °C.

Observation of novel charge ordering and spin reorientation in perovskite oxide PbFeO3.

PbMO3 (M = 3d transition metals) family shows systematic variations in charge distribution and intriguing physical properties due to its delicate energy balance between Pb 6s and transition metal 3d orbitals. However, the detailed structure and physical properties of PbFeO3 remain unclear. Herein, we reveal that PbFeO3 crystallizes into an unusual 2ap × 6ap × 2ap orthorhombic perovskite super unit cell with space group Cmcm. The distinctive crystal construction and valence distribution of Pb2+0.5Pb4+0.5FeO3 lead to a long range charge ordering of the -A-B-B- type of the layers with two different oxidation states of Pb (Pb2+ and Pb4+) in them. A weak ferromagnetic transition with canted antiferromagnetic spins along the a-axis is found to occur at 600 K. In addition, decreasing the temperature causes a spin reorientation transition towards a collinear antiferromagnetic structure with spin moments along the b-axis near 418 K. Our theoretical investigations reveal that the peculiar charge ordering of Pb generates two Fe3+ magnetic sublattices with competing anisotropic energies, giving rise to the spin reorientation at such a high critical temperature.

An original polymorph sequence in the high-temperature evolution of the perovskite Pb2TmSbO6.

The synthesis, crystal structure, and dielectric properties of the novel double perovskite Pb(2)TmSbO(6) are described. The room-temperature crystal structure was determined by ab initio procedures from neutron powder diffraction (NPD) and synchrotron X-ray powder diffraction (SXRPD) data in the monoclinic C2/c (No. 15) space group. This double perovskite contains a completely ordered array of alternating TmO(6) and SbO(6) octahedra sharing corners, tilted in antiphase along the three pseudocubic axes, with an a(-)b(-)b(-) tilting scheme, which is very unusual in the crystallochemistry of perovskites. The lead atoms occupy a highly asymmetric void with 8-fold coordination due to the stereoactivity of the Pb(2+) lone electron pair. This compound presents three successive phase transitions in a narrow temperature range (at T1 = 385 K, T2 = 444 K, and T3 = 460 K in the heating run) as shown by differential scanning calorimetry (DSC) data. The crystal structure and temperature-dependent NPD follow the space-group sequence C2/c → P2(1)/n → R3 → Fm3m. This is a novel polymorph succession in the high-temperature evolution of perovskite-type oxides. The Tm/Sb long-range ordering is preserved across the consecutive phase transitions. Dielectric permittivity measurements indicate the presence of a paraelectric/antiferroelectric transition (associated with the last structural transition), as suggested by the negative Curie temperature obtained from the Curie-Weiss fit of the reciprocal permittivity.

Slicing the perovskite structure with crystallographic shear planes: the A(n)B(n)O(3n-2) homologous series.

A new A(n)B(n)O(3n-2) homologous series of anion-deficient perovskites has been evidenced by preparation of the members with n = 5 (Pb(2.9)Ba(2.1)Fe(4)TiO(13)) and n = 6 (Pb(3.8)Bi(0.2)Ba(2)Fe(4.2)Ti(1.8)O(16)) in a single phase form. The crystal structures of these compounds were determined using a combination of transmission electron microscopy and X-ray and neutron powder diffraction (S.G. Ammm, a = 5.74313(7), b = 3.98402(4), c = 26.8378(4) Å, R(I) = 0.035, R(P) = 0.042 for Pb(2.9)Ba(2.1)Fe(4)TiO(13) and S.G. Imma, a = 5.7199(1), b = 3.97066(7), c = 32.5245(8) Å, R(I) = 0.032, R(P) = 0.037 for Pb(3.8)Bi(0.2)Ba(2)Fe(4.2)Ti(1.8)O(16)). The crystal structures of the A(n)B(n)O(3n-2) homologues are formed by slicing the perovskite structure with (101)(p) crystallographic shear (CS) planes. The shear planes remove a layer of oxygen atoms and displace the perovskite blocks with respect to each other by the 1/2[110](p) vector. The CS planes introduce edge-sharing connections of the transition metal-oxygen polyhedra at the interface between the perovskite blocks. This results in intrinsically frustrated magnetic couplings between the perovskite blocks due to a competition of the exchange interactions between the edge- and the corner-sharing metal-oxygen polyhedra. Despite the magnetic frustration, neutron powder diffraction and Mössbauer spectroscopy reveal that Pb(2.9)Ba(2.1)Fe(4)TiO(13) and Pb(3.8)Bi(0.2)Ba(2)Fe(4.2)Ti(1.8)O(16) are antiferromagnetically ordered below T(N) = 407 and 343 K, respectively. The Pb(2.9)Ba(2.1)Fe(4)TiO(13) and Pb(3.8)Bi(0.2)Ba(2)Fe(4.2)Ti(1.8)O(16) compounds are in a paraelectric state in the 5-300 K temperature range.

Reversible photoswitching between nitrito-N and nitrito-O isomers in trans-[Ru(py)(4)(NO(2))(2)].

Nitro-nitrito photoisomerisation is investigated in solid samples and solutions of trans-[Ru(py)(4)(NO(2))(2)]. Using light of wavelength 325 nm 50% of the N-bound Ru-NO(2) ligands can be switched to the O-bound Ru-ONO configuration (nitrito-N to nitrito-O isomerisation) at temperatures below T = 250 K in solids. The population of the isomeric configurations is determined with infrared spectroscopy from the decrease of the area of the nu(NO) stretching and delta(NO) deformation modes. In a frozen methanol-ethanol solution nearly 100% can be converted to the nitrito-O configuration. Upon heating above T = 250 K the Ru-NO(2) configuration is restored. The nitrito-O Ru-ONO configuration can be partially transferred back to the nitrito-N configuration by irradiation with light in the spectral range 405-442 nm. Using absorption spectroscopy on a frozen methanol-ethanol solution, two new bands at 447 and 380 nm are observed in the nitrito-O configuration compared to one at 334 nm of the nitrito-N ground state configuration. The photoconversion is initiated by the metal-to ligand charge transfer transition Ru(d) -->pi*(NO(2),py) as shown by the calculated partial density of states using Density Functional Theory. The calculations yield also the structure of the nitrito-N and nitrito-O isomer as well as the corresponding vibrational densities. The experimental structure of the ground state is determined using powder diffraction.