RESUMO
BACKGROUND: Gasdermin D (GSDMD)-mediated pyroptotic cell death is implicated in the pathogenesis of cognitive deficits in sepsis-associated encephalopathy (SAE), yet the underlying mechanisms remain largely unclear. Dynamin-related protein 1 (Drp1) facilitates mitochondrial fission and ensures quality control to maintain cellular homeostasis during infection. This study aimed to investigate the potential role of the GSDMD/Drp1 signaling pathway in cognitive impairments in a mouse model of SAE. METHODS: C57BL/6 male mice were subjected to cecal ligation and puncture (CLP) to establish an animal model of SAE. In the interventional study, mice were treated with the GSDMD inhibitor necrosulfonamide (NSA) or the Drp1 inhibitor mitochondrial division inhibitor-1 (Mdivi-1). Surviving mice underwent behavioral tests, and hippocampal tissues were harvested for histological analysis and biochemical assays at corresponding time points. Haematoxylin-eosin staining and TUNEL assays were used to evaluate neuronal damage. Golgi staining was used to detect synaptic dendritic spine density. Additionally, transmission electron microscopy was performed to assess mitochondrial and synaptic morphology in the hippocampus. Local field potential recordings were conducted to detect network oscillations in the hippocampus. RESULTS: CLP induced the activation of GSDMD, an upregulation of Drp1, leading to associated mitochondrial impairment, neuroinflammation, as well as neuronal and synaptic damage. Consequently, these effects resulted in a reduction in neural oscillations in the hippocampus and significant learning and memory deficits in the mice. Notably, treatment with NSA or Mdivi-1 effectively prevented these GSDMD-mediated abnormalities. CONCLUSIONS: Our data indicate that the GSDMD/Drp1 signaling pathway is involved in cognitive deficits in a mouse model of SAE. Inhibiting GSDMD or Drp1 emerges as a potential therapeutic strategy to alleviate the observed synaptic damages and network oscillations abnormalities in the hippocampus of SAE mice.
Assuntos
Disfunção Cognitiva , Encefalopatia Associada a Sepse , Sepse , Animais , Masculino , Camundongos , Disfunção Cognitiva/metabolismo , Dinaminas/metabolismo , Hipocampo/metabolismo , Camundongos Endogâmicos C57BL , Sepse/patologia , Encefalopatia Associada a Sepse/metabolismo , Transdução de SinaisRESUMO
In this study, targeted sequencing to screen 50 multidrug refractory multiple myeloma (rMM) patients was performed by using the Multiple Myeloma Mutation Panel. Patients were pretreated with both immunomodulatory drugs (IMiDs) and proteasome inhibitors (PIs), and 88%, 78%, and 68% were refractory to an IMiD, a PI, or both, respectively. The majority of patients had progressive (82%) or refractory (78%) disease immediately before sampling, with 43% being IMiD refractory and 46% being PI refractory in the most recent line of therapy. Compared with newly diagnosed MM, an increased prevalence of mutations in the Ras pathway genes KRAS, NRAS, and/or BRAF (72%), as well as TP53 (26%), CRBN (12%), and CRBN pathway genes (10%) was observed. Longitudinal analyses performed in 3 patients with CRBN mutations at time of IMiD resistance confirmed that these mutations were undetectable at earlier, IMiD-sensitive time points. Furthermore, the functional introduction of these mutations in MM cells conferred lenalidomide resistance in vitro. These data indicate a differential genetic landscape in rMM associated with drug response.
Assuntos
GTP Fosfo-Hidrolases/genética , Proteínas de Membrana/genética , Mieloma Múltiplo/genética , Mutação , Peptídeo Hidrolases/genética , Proteínas Proto-Oncogênicas B-raf/genética , Proteínas Proto-Oncogênicas p21(ras)/genética , Transdução de Sinais/genética , Proteínas Adaptadoras de Transdução de Sinal , Adulto , Idoso , Idoso de 80 Anos ou mais , Resistencia a Medicamentos Antineoplásicos/efeitos dos fármacos , Resistencia a Medicamentos Antineoplásicos/genética , Feminino , Sequenciamento de Nucleotídeos em Larga Escala , Humanos , Masculino , Pessoa de Meia-Idade , Mieloma Múltiplo/tratamento farmacológico , Transdução de Sinais/efeitos dos fármacos , Proteína Supressora de Tumor p53 , Ubiquitina-Proteína LigasesRESUMO
BACKGROUND: Spinal N-methyl D-aspartate receptors play an important role in the pathogenesis of neuropathic pain, and administration of N-methyl D-aspartate receptor antagonists can attenuate this hyperpathia. Ifenprodil is an antagonist selective for N-methyl D-aspartate receptor 2B (NR2B) subunits. Several researches have reported effective analgesia of ifenprodil in animal models of neuropathic pain. We extended this work to include chronic compression of the dorsal root ganglia (CCD). METHODS: The paw withdrawal mechanical threshold and paw withdrawal thermal latency tests were used to assess mechanical allodynia and thermal hyperalgesia after a CCD operation and intrathecal injection of ifenprodil. We used immunohistochemistry and immunoblotting to investigate the effect of ifenprodil on NR2B subunits expression in CCD rats. RESULTS: The data revealed increased expression of NR2B subunits in the superficial dorsal horn in CCD rats. We found that, in addition to a marked suppression of thermal hyperalgesia and mechanical allodynia, intrathecal injection ifenprodil treatment causes a decreased expression of NR2B in the spinal cord. CONCLUSIONS: These data suggest that ifenprodil induced antinociception in CCD rats and provided further evidence for the important role of NR2B subunits in the development of neuropathic pain.
Assuntos
Analgésicos , Antagonistas de Aminoácidos Excitatórios/farmacologia , Gânglios Espinais/metabolismo , Síndromes de Compressão Nervosa/metabolismo , Piperidinas/farmacologia , Células do Corno Posterior/metabolismo , Receptores de N-Metil-D-Aspartato/biossíntese , Animais , Comportamento Animal/efeitos dos fármacos , Western Blotting , Eletroforese em Gel de Poliacrilamida , Antagonistas de Aminoácidos Excitatórios/administração & dosagem , Gânglios Espinais/citologia , Gânglios Espinais/efeitos dos fármacos , Imuno-Histoquímica , Injeções Espinhais , Masculino , Síndromes de Compressão Nervosa/patologia , Medição da Dor/efeitos dos fármacos , Piperidinas/administração & dosagem , Células do Corno Posterior/efeitos dos fármacos , Ratos , Ratos Sprague-DawleyRESUMO
OBJECTIVE: The purpose of this study was to evaluate the clinical result of 546 tetracycline-stained teeth restored with a porcelain laminate veneer system (Cerinate, Den-Mat, USA) for aesthetic reasons. METHODS: Tetracycline-stained teeth (546) were restored with a porcelain veneer system, and bonded with Ultra Bond resin cement. The restorations were recalled after 0.5, 1.5 and 2.5 years, respectively. Modified Ryge criteria were used to evaluate the veneers marginal adaptation, interfacial staining, secondary caries, postoperative sensitivity and the patients' satisfaction of the colour of the restorations. RESULTS: This study found that 99% veneers had excellent marginal adaptations; and less than 1% veneers required rebonding in the first 6 months; the colour of the veneers was stable and no evident staining was found. Almost all patients were satisfied with the colour match of their restorations 1 year after placement. CONCLUSIONS: The research indicated that the porcelain veneer restoration system under investigation provided a reliable and highly satisfactory choice for the aesthetic restoration of tetracycline-stained teeth.
Assuntos
Antibacterianos/efeitos adversos , Porcelana Dentária , Facetas Dentárias , Tetraciclina/efeitos adversos , Descoloração de Dente/terapia , Cerâmica , Cor , Resinas Compostas , Adaptação Marginal Dentária , Feminino , Humanos , Masculino , Satisfação do Paciente , Cimentos de Resina , Descoloração de Dente/induzido quimicamente , Preparo do DenteRESUMO
To study the microstructural influence of dry or wet dentin bonding surface on the dentin bonding interface, five wet bonding systems were used to bond Chrisma B20 resin with dry or moist dentin surface with scanning electron microscope. All these systems were found to be well able to infiltrate into the dentin bonding interface on wet dentin surface, and significant changes occurred in the bonding interface when acetone-based adhesives were applied on dry dentin surfaces, demonstrating thinner hybrid layer and the formation of partially hybrid region, while alcohol- and water-based adhesives showed no changes. The necessity of moist dentin surface is therefore suggested when wet bonding systems are used.
Assuntos
Colagem Dentária , Dentina/diagnóstico por imagem , Humanos , Microscopia Eletrônica de Varredura , UltrassonografiaRESUMO
PURPOSE: To study the influences on microstructure characteristic and bonding strength of acetone-based wet bonding systems when bonding on dry or wet dentin surface. METHODS: Three acetone-based wet bonding systems, Gluma One-Bond, Bond-1 and One-Step, were used to bond Chrisma composite resin to dry or moist dentin surface, and the bonding interface was observed with HITACHI S-2700 scanning electron microscope. Microtensile strengths of different groups were measured with Instro 1195. RESULTS: All three bonding systems can infiltrate well into dentin bonding interface in the wet groups. A hybrid layer of about 5microm could be observed with resin tags traversing from the resin layer above into the undemineralized dentin below and the lateral branch of dentinal tubule. In the dry groups, three zones, a surface and a basal hybrid layer sandwiching a middle hybridoid region, could be observed. The hybrid layer was very thinner. Microtensile strength had significantly decreased while bonding on dry dentin surface with acetone-based wet bonding systems, with the maximum decrease of 39% in Bond-1. CONCLUSION: Incompletely infiltrated adhesive on dentin bonding interface could be observed and microtensile strength had significantly decreased while bonding on dry dentin surface with acetone-based wet bonding systems. Moist dentin surface, which can maintain collagen-rich fibrous network of demineralized dentin, is necessary when bonding with acetone-based wet bonding systems. Microtensile strength approaches to the real dentin bonding strength.
Assuntos
Colagem Dentária , Acetona , Adesivos , Dentina/ultraestrutura , Adesivos Dentinários , Metacrilatos , Microscopia Eletrônica de Varredura , Cimentos de Resina , Resistência à TraçãoRESUMO
OBJECTIVE: The purpose of this study was to evaluate the clinical result of 546 tetracycline-stained teeth corrected with Cerinate porcelain laminate veneer system for esthetic purpose. METHODS: 546 tetracycline-stained teeth were corrected with Cerinate porcelain veneer system, and bonded with Ultra Bond resin cement. The restorations were recalled after 0.5 year, 1.5 years and 2.5 years, respectively. modified Ryge criteria were used to evaluate the veneers marginal adaptation, interfacial staining, secondary caries, postoperative sensitivity and the patients' satisfaction with the shade of the restorations. RESULTS: this study found that 99% veneers had excellent marginal adaptations; and less than 1% veneers were rebonded after debond in the first half year application; the color of the veneers was stable and no evident staining was found. Almost all patients were satisfied with their restoration color after 1 year's application. CONCLUSION: The research indicated that Cerinate porcelain veneer restoration system is a reliable and ideal choice for the correction of tetracycline-stained teeth.
Assuntos
Antibacterianos/efeitos adversos , Porcelana Dentária , Facetas Dentárias , Tetraciclina/efeitos adversos , Descoloração de Dente/terapia , Cor , Resinas Compostas , Adaptação Marginal Dentária , Humanos , Descoloração de Dente/induzido quimicamente , Resultado do TratamentoRESUMO
OBJECTIVE: This study compared the infinity optical thickness of composite resins with the same color marks. METHODS: In this test nine composite resins (shade A2) were used. A plastic mold (10mm in diameter, 4mm in height) was used to prepare 27 disk specimens. Color was measured by CIE L*a*b* relative to CIE source against a white and a black background, using a colorimeter. Color difference (DeltaE*) was calculated as DeltaE=[(DeltaL*(2)+(Deltaa*)(2)+(Deltab*)(2)](1/2). The heights of composite resins were recorded as DeltaE is approximately 1.5. The infinity optical thickness of composite resins when DeltaE = 1.5 was calculated by regression formulation. RESULTS: The results indicated that composite resins with hybrid filler and opaque pigments were superior infinity optical thickness. Composite resins contain micro-filler were inferior infinity optical thickness. CONCLUSION: Although composite resins with the same color mark had the similar fillers, they had different color and infinity optical thickness.
RESUMO
OBJECTIVE: This study compared the opaque characteristics of light-cured composite resins and attached shade guides. METHODS: Three kinds of light-cured composite resins and attached shads guides were used. A plastic mold (10mm in diameter and 4mm in height) was used to prepare disk specimens. Color was measured by CIE L*a*b* relative to CIE source against a white and a black background, using a colorimeter. Color change (DeltaE)was calculated as DeltaE=[(DeltaL*)(2)+(Deltaa*)(2)+(Deltab*)(2)](1/2). The heights of composite resins were recorded as DeltaE is approximately 1.5. The infinity optical thickness of composite resins when delta E*=1.5 was calculated by regression formulation. RESULTS: There was significant difference in color difference and the infinity optical thickness among materials and shades. The infinity optical thickness gradual decreased in the same shade mark from 1 to 4, and from A to D the results was not simple. CONCLUSION: There was significant difference in the infinity optical thickness between the attached shade guides and the resins materials. Composite resins contain micro-filler were inferior in infinity optical thickness.
RESUMO
OBJECTIVE: To compare the fracture resistances of pulpless teeth restored with FRC (Fiber Reinforced Composite) posts and three kinds of resin core material. METHODS: A total of 42 recently extracted upper incisors were randomly divided into 3 groups. Group A was restored with prefabricated glass-fiber posts and Artglass polymer core; group B with prefabricated glass-fiber posts and Charisma composite resin core; and group C with prefabricated glass-fiber posts and AB composite resin core. In every group, the core material was processed by hot-press and non hot-press respectively. The posts size and shape were identical in the 3 groups. All teeth were fully covered with polycarbonate resin crowns. Fracture resistance was measured by applying point force at 130 degrees to the long axis of the teeth on an universal testing machine. RESULTS: Mean fracture threshold was 505.4 N +/- 42.0 N and 564.1 N +/- 41.7 N in group A, 411.3 N +/- 23.3 N and 315.3 N +/- 19.1 N in group B and 358.4 N +/- 36.1 N and 423.4 N +/- 47.5 N in group C. In all groups, there was no posts fracture and polycarbonate resin crowns fragmentation. CONCLUSION: The composite restoration of FRC posts combined with resin core and resin crown can improve the fracture resistance of the pulpless roots. The strength of resin core material can be increased by hot-press methods.