Catalytic disconnection of C-O bonds in epoxy resins and composites.

Fibre-reinforced epoxy composites are well established in regard to load-bearing applications in the aerospace, automotive and wind power industries, owing to their light weight and high durability. These composites are based on thermoset resins embedding glass or carbon fibres1. In lieu of viable recycling strategies, end-of-use composite-based structures such as wind turbine blades are commonly landfilled1-4. Because of the negative environmental impact of plastic waste5,6, the need for circular economies of plastics has become more pressing7,8. However, recycling thermoset plastics is no trivial matter1-4. Here we report a transition-metal-catalysed protocol for recovery of the polymer building block bisphenol A and intact fibres from epoxy composites. A Ru-catalysed, dehydrogenation/bond, cleavage/reduction cascade disconnects the C(alkyl)-O bonds of the most common linkages of the polymer. We showcase the application of this methodology to relevant unmodified amine-cured epoxy resins as well as commercial composites, including the shell of a wind turbine blade. Our results demonstrate that chemical recycling approaches for thermoset epoxy resins and composites are achievable.

Low Pressure Carbonylation of Benzyl Carbonates and Carbamates for Applications in 13 C Isotope Labeling and Catalytic CO2 Reduction.

Herein, we report a methodology to access isotopically labeled esters and amides from carbonates and carbamates employing an oxygen deletion strategy. This methodology utilizes a decarboxylative carbonylation approach for isotope labeling with near stoichiometric, ex situ generated 12 C, or 13 C carbon monoxide. This reaction is characterized by its broad scope, functional group tolerance, and high yields, which is showcased with the synthesis of structurally complex molecules. A complementary method that operates by the catalytic in situ generation of CO via the reduction of CO2 liberated during decarboxylation has also been developed as a proof-of-concept approach that CO2 -derived compounds can be converted to CO-containing frameworks. Mechanistic studies provide insight into the catalytic steps which highlight the impact of ligand choice to overcome challenges associated with low-pressure carbonylation methodologies, along with rational for the development of future methodologies.

Selective N-Terminal Acylation of Peptides and Proteins with Tunable Phenol Esters.

Selective modification of peptides and proteins is of foremost importance for the development of biopharmaceuticals and exploring biochemical pathways, as well as other applications. Here, we present a study on the development of a general and easily applicable selective method for N-terminal acylation of biomolecules, applying a new type of phenol esters. Key to the success was the development of highly tunable phenol activators bearing in the ortho-position, sulfonic acid or sulfonamide, acting as a steric shield for hydrolysis, and electron-withdrawing groups in the other ortho- and para-position for controlling the reactivity of the activated phenol esters. A library of heptapeptides, testing all 20 natural amino acids positioned at the N-terminal, were acylated in a selective manner at the N-terminus. The majority showed high conversion and excellent Nα-selectivity. Several biologically relevant biomolecules, including DesB30 insulin and human growth hormone, could also be modified at the N-terminal in a highly selective way, exemplified by either a fluorophore or a fatty acid sidechain. Finally, taking advantage of the possibility to accurately adjust the reactivity of the phenol esters, we present a potential strategy for the construction of dual active biopharmaceuticals through the employment of a bifunctional acylation linker and demonstrate its use in the creation of a GLP-1 insulin analogue, coupled through the lysine residue of GLP-1 and the N-terminal PheB1 amine of DesB30 insulin.

New Phenol Esters for Efficient pH-Controlled Amine Acylation of Peptides, Proteins, and Sepharose Beads in Aqueous Media.

This paper describes the discovery, synthesis, and use of novel water-soluble acylation reagents for efficient and selective modification, cross-linking, and labeling of proteins and peptides, as well as for their use in the effective modification of sepharose beads under pH control in aqueous media. The reagents are based on a 2,4-dichloro-6-sulfonic acid phenol ester core combined with a variety of linker structures. The combination of these motifs leads to an ideal balance between hydrolytic stability and reactivity. At high pH, good to excellent conversions (up to 95%) and regioselectivity (up to 99:1 Nε/Nα amine ratio) in the acylation were realized, exemplified by the chemical modification of incretin peptides and insulin. At neutral pH, an unusually high preference toward the N-terminal phenylalanine in an insulin derivative was observed (>99:1 Nα/Nε), which is up until now unprecedented in the literature for more elaborate reagents. In addition, the unusually high hydrolytic stability of these reagents and their ability to efficiently react at low concentrations (28 µM or 0.1 mg/mL) are exemplified with a hydroxy linker-based reagent and are a unique feature of this work.

Pd-Catalyzed Difluoromethylations of Aryl Boronic Acids, Halides, and Pseudohalides with ICF2 H Generated ex Situ.

An expedient ex-situ generation of difluoroiodomethane (DFIM) and its immediate use in a Pd-catalyzed difluoromethylation of aryl boronic acids and ester derivatives in a two-chamber reactor is reported. Heating a solution of bromodifluoroacetic acid with sodium iodide in sulfolane proved to be effective for the generation of near stoichiometric amounts of DFIM for the ensuing catalytic coupling step. A two-step difluoromethylation of aryl (pseudo)halides with tetrahydroxydiboron as a low-cost reducing agent, both promoted by Pd catalysis, proved effective to install this fluorine-containing C1 group onto several pharmaceutically relevant molecules. Finally, the method proved adaptable to deuterium incorporation by simply adding D2 O to the DFIM-generating chamber.

Regioselective Hydroalkylation of Vinylarenes by Cooperative Cu and Ni Catalysis.

Disclosed here is a dual copper and nickel catalytic system with a silyl hydride source for promoting the linear selective hydroalkylation of vinylarenes. This carbon-carbon bond-forming protocol is applied to couple a variety of functionalized vinylarenes with alkyl halides applying a nickel(II) NNN pincer complex in the presence of an NHC-ligated copper catalyst. This combination allows for a 1 mol % loading of the nickel catalyst leading to turnover numbers of up to 72. Over 40 examples are presented, including applications for pharmaceutical diversification. Labeling experiments demonstrated the regioselectivity of the reaction and revealed that the copper catalyst plays a crucial role in enhancing the rate for formation of the reactive linear alkyl nickel complex. Overall, the presented work provides a complimentary approach for hydroalkylation reactions, whilst providing a preliminary mechanistic understanding of the cooperativity between the copper and nickel complexes.

Nickel-Mediated Alkoxycarbonylation for Complete Carbon Isotope Replacement.

Many commercial drugs, as well as upcoming pharmaceutically active compounds in the pipeline, display aliphatic carboxylic acids or derivatives thereof as key structural entities. Synthetic methods for rapidly accessing isotopologues of such compounds are highly relevant for undertaking critical pharmacological studies. In this paper, we disclose a direct synthetic route allowing for full carbon isotope replacement via a nickel-mediated alkoxycarbonylation. Employing a nickelII pincer complex ([(N2N)Ni-Cl]) in combination with carbon-13 labeled CO, alkyl iodide, sodium methoxide, photocatalyst, and blue LED light, it was possible to generate the corresponding isotopically labeled aliphatic carboxylates in good yields. Furthermore, the developed methodology was applied to the carbon isotope substitution of several pharmaceutically active compounds, whereby complete carbon-13 labeling was successfully accomplished. It was initially proposed that the carboxylation step would proceed via the in situ formation of a nickellacarboxylate, generated by CO insertion into the Ni-alkoxide bond. However, preliminary mechanistic investigations suggest an alternative pathway involving attack of an open shell species generated from the alkyl halide to a metal ligated CO to generate an acyl NiIII species. Subsequent reductive elimination involving the alkoxide eventually leads to carboxylate formation. An excess of the alkoxide was essential for obtaining a high yield of the product. In general, the presented methodology provides a simple and convenient setup for the synthesis and carbon isotope labeling of aliphatic carboxylates, while providing new insights about the reactivity of the N2N nickel pincer complex applied.

Promoting Selective Generation of Formic Acid from CO2 Using Mn(bpy)(CO)3Br as Electrocatalyst and Triethylamine/Isopropanol as Additives.

Urgent solutions are needed to efficiently convert the greenhouse gas CO2 into higher-value products. In this work, fac-Mn(bpy)(CO)3Br (bpy = 2,2'-bipyridine) is employed as electrocatalyst in reductive CO2 conversion. It is shown that product selectivity can be shifted from CO toward HCOOH using appropriate additives, i.e., Et3N along with iPrOH. A crucial aspect of the strategy is to outrun the dimer-generating parent-child reaction involving fac-Mn(bpy)(CO)3Br and [Mn(bpy)(CO)3]- and instead produce the Mn hydride intermediate. Preferentially, this is done at the first reduction wave to enable formation of HCOOH at an overpotential as low as 260 mV and with faradaic efficiency of 59 ± 1%. The latter may be increased to 71 ± 3% at an overpotential of 560 mV, using 2 M concentrations of both Et3N and iPrOH. The nature of the amine additive is crucial for product selectivity, as the faradaic efficiency for HCOOH formation decreases to 13 ± 4% if Et3N is replaced with Et2NH. The origin of this difference lies in the ability of Et3N/iPrOH to establish an equilibrium solution of isopropyl carbonate and CO2, while with Et2NH/iPrOH, formation of the diethylcarbamic acid is favored. According to density-functional theory calculations, CO2 in the former case can take part favorably in the catalytic cycle, while this is less opportune in the latter case because of the CO2-to-carbamic acid conversion. This work presents a straightforward procedure for electrochemical reduction of CO2 to HCOOH by combining an easily synthesized manganese catalyst with commercially available additives.

A Nickel(II)-Mediated Thiocarbonylation Strategy for Carbon Isotope Labeling of Aliphatic Carboxamides.

A series of pharmaceutically relevant small molecules and biopharmaceuticals bearing aliphatic carboxamides have been successfully labeled with carbon-13. Key to the success of this novel carbon isotope labeling technique is the observation that 13 C-labeled NiII -acyl complexes, formed from a 13 CO insertion step with NiII -alkyl intermediates, rapidly react in less than one minute with 2,2'-dipyridyl disulfide to quantitatively form the corresponding 2-pyridyl thioesters. Either the use of 13 C-SilaCOgen or 13 C-COgen allows for the stoichiometric addition of isotopically labeled carbon monoxide. Subsequent one-pot acylation of a series of structurally diverse amines provides the desired 13 C-labeled carboxamides in good yields. A single electron transfer pathway is proposed between the NiII -acyl complexes and the disulfide providing a reactive NiIII -acyl sulfide intermediate, which rapidly undergoes reductive elimination to the desired thioester. By further optimization of the reaction parameters, reaction times down to only 11 min were identified, opening up the possibility of exploring this chemistry for carbon-11 isotope labeling. Finally, this isotope labeling strategy could be adapted to the synthesis of 13 C-labeled liraglutide and insulin degludec, representing two antidiabetic drugs.

Design and Applications of a SO2 Surrogate in Palladium-Catalyzed Direct Aminosulfonylation between Aryl Iodides and Amines.

A new SO2 surrogate is reported that is cheap, bench-stable, and can be accessed in just two steps from bulk chemicals. Essentially complete SO2 release is achieved in 5 minutes. Eight established sulfonylation reactions proceeded smoothly by ex situ formation of SO2 by utilizing a two-chamber system in combination with the SO2 surrogate. Furthermore, we report the first direct aminosulfonylation between aryl iodides and amines. Broad functional group tolerance is demonstrated, and the method is applicable to pharmaceutically relevant substrates, including heterocyclic substrates.

Are Amines the Holy Grail for Facilitating CO2 Reduction?

The selective and efficient reduction of carbon dioxide represents a key solution to producing non-fossil-fuel-based feedstocks for the chemical industry, while alleviating the increasing atmospheric concentration of this greenhouse gas. A variety of catalytic methods for the CO2 reduction reaction (CO2 RR) have been developed, including hydrogenations and electrochemical or photochemical reductions. For many of the most significant breakthroughs reported in the last decade, we realized that amines or closely related functional groups play a critical role for such transformations, and in several cases, are directly associated with the catalyst as a pendant group. Amines play multiple roles, such as CO2 trapping agents, proton shuttles, electron donors, or facilitators of CO2 reductions through formamide derivatives. In this Viewpoint, we compile some of these recent findings, and discuss their significance in a broader context in an attempt to provide guidelines for the design of new catalysts with enhanced activity and selectivity.

Low-Valence Znδ+ (0<δ<2) Single-Atom Material as Highly Efficient Electrocatalyst for CO2 Reduction.

A nitrogen-stabilized single-atom catalyst containing low-valence zinc atoms (Znδ+ -NC) is reported. It contains saturated four-coordinate (Zn-N4 ) and unsaturated three-coordinate (Zn-N3 ) sites. The latter makes Zn a low-valence state, as deduced from X-ray photoelectron spectroscopy, X-ray absorption spectroscopy, electron paramagnetic resonance, and density functional theory. Znδ+ -NC catalyzes electrochemical reduction of CO2 to CO with near-unity selectivity in water at an overpotential as low as 310 mV. A current density up to 1 A cm-2 can be achieved together with high CO selectivity of >95 % using Znδ+ -NC in a flow cell. Calculations suggest that the unsaturated Zn-N3 could dramatically reduce the energy barrier by stabilizing the COOH* intermediate owing to the electron-rich environment of Zn. This work sheds light on the relationship among coordination number, valence state, and catalytic performance and achieves high current densities relevant for industrial applications.

Ligand-Controlled Product Selectivity in Electrochemical Carbon Dioxide Reduction Using Manganese Bipyridine Catalysts.

Electrocatalysis is a promising tool for utilizing carbon dioxide as a feedstock in the chemical industry. However, controlling the selectivity for different CO2 reduction products remains a major challenge. We report a series of manganese carbonyl complexes with elaborated bipyridine or phenanthroline ligands that can reduce CO2 to either formic acid, if the ligand structure contains strategically positioned tertiary amines, or CO, if the amine groups are absent in the ligand or are placed far from the metal center. The amine-modified complexes are benchmarked to be among the most active catalysts for reducing CO2 to formic acid, with a maximum turnover frequency of up to 5500 s-1 at an overpotential of 630 mV. The conversion even works at overpotentials as low as 300 mV, although through an alternative mechanism. Mechanistically, the formation of a Mn-hydride species aided by in situ protonated amine groups was determined to be a key intermediate by cyclic voltammetry, 1H NMR, DFT calculations, and infrared spectroelectrochemistry.

Carbonylative Suzuki-Miyaura couplings of sterically hindered aryl halides: synthesis of 2-aroylbenzoate derivatives.

We have developed a carbonylative approach to the synthesis of diversely substituted 2-aroylbenzoate esters featuring a new protocol for the carbonylative coupling of aryl bromides with boronic acids and a new strategy to favour carbonylative over non-carbonylative reactions. Two different synthetic pathways - (i) the alkoxycarbonylation of 2-bromo benzophenones and (ii) the carbonylative Suzuki-Miyaura coupling of 2-bromobenzoate esters - were evaluated. The latter approach provided a broader substrate tolerance, and thus was the preferred pathway. We observed that 2-substituted aryl bromides were challenging substrates for carbonylative chemistry favouring the non-carbonylative pathway. However, we found that carbonylative Suzuki-Miyaura couplings can be improved by slow addition of the boronic acid, suppressing the unwanted direct Suzuki coupling and, thus increasing the yield of the carbonylative reaction.

Direct Access to Isotopically Labeled Aliphatic Ketones Mediated by Nickel(I) Activation.

An extensive range of functionalized aliphatic ketones with good functional-group tolerance has been prepared by a NiI -promoted coupling of either primary or secondary alkyl iodides with NN2 pincer NiII -acyl complexes. The latter were easily accessed from the corresponding NiII -alkyl complexes with stoichiometric CO. This Ni-mediated carbonylative coupling is adaptable to late-stage carbon isotope labeling, as illustrated by the preparation of isotopically labelled pharmaceuticals. Preliminary investigations suggest the intermediacy of carbon-centered radicals.

Carbon Isotope Labeling Strategy for ß-Amino Acid Derivatives via Carbonylation of Azanickellacycles.

A series of 4-membered azametallacycles have been prepared by the oxidative addition of Ni(0) with aziridines. Stoichiometric 13C-labeled carbon monoxide could be efficiently incorporated via Ni-C bond insertion to generate air stable and isolable cyclic Ni-acyl complexes. Upon subjection to a range of C-, N-, O-, and S-nucleophiles, 13C-labeled ß-amino acids and derivatives thereof, as well as ß-aminoketones, could be rapidly accessed. The methodology proved highly adaptable for the synthesis of the antidiabetic drug, sitagliptin, with a single carbon isotope label.

Access to ß-Ketonitriles through Nickel-Catalyzed Carbonylative Coupling of α-Bromonitriles with Alkylzinc Reagents.

Herein, we report a nickel-catalyzed carbonylative coupling of α-bromonitriles and alkylzinc reagents with near stoichiometric carbon monoxide to give ß-ketonitriles in good yields. The reaction is catalyzed by a readily available and stable nickel(II) pincer complex. The developed protocol tolerates substrates bearing a variety of functional groups, which would be problematic or incompatible with previous synthetic methods. Additionally, we demonstrate the suitability of the method for carbon isotope labeling by the synthesis of 13 C-labeled ß-ketonitriles and their transformation into isotopically labeled heterocycles.

Liquid Marbles: A Promising and Versatile Platform for Miniaturized Chemical Reactions.

Lab in a droplet: Rapid condensation reactions between aldehydes and indoles can be performed efficiently with a high-viscosity solvent in liquid marbles since the mixing of the reagents is induced by an external electric field. This strategy complements other stimuli, such as magnetic field and acoustic waves, and thereby opens a new avenue for dual- and multi-component miniaturized chemical reactions.

Synthesis of Aliphatic Carboxamides Mediated by Nickel NN2 -Pincer Complexes and Adaptation to Carbon-Isotope Labeling.

The development of a nickel-mediated aminocarbonylation utilizing NN2 -pincer Ni-complexes, alkylzinc reagents, stoichiometric carbon monoxide and amines is described for the first time, which can be adapted to late-stage carbon-isotope labeling. This work expands the scope of the highly established palladium-promoted version of the reaction, by allowing carbon-sp3 fragments to take part in the three-component reaction. Finally, the results obtained show a remarkable effect of the pincer ligand for the reductive elimination step with the amine, which is followed by 13 C NMR spectroscopy studies.

Recent developments in carbonylation chemistry using [13 C]CO, [11 C]CO, and [14 C]CO.

Carbon monoxide represents the most important C1-building block for the chemical industry, both for the production of bulk and fine chemicals, but also for synthetic fuels. Yet its toxicity and subsequently its cautious handling have limited its applications in medicinal chemistry research and in particular for the synthesis of pharmaceutically relevant molecules. Recent years have nevertheless witnessed a considerable headway on the development of carbon monoxide surrogates and reactor systems, which provide an ideal setting for performing carbonylation chemistry with stoichiometric and substoichiometric carbon monoxide. Such setups are particularly ideal for the introduction of isotope labels such as carbon-11, carbon-13, and carbon-14 into bioactive compounds. This review summarizes this growing field and examines the large number of carbonylation reactions that can be exploited for the introduction of a carbon isotope.