Animals evoking fear in the Cradle of Humankind: snakes, scorpions, and large carnivores.

Theories explain the presence of fears and specific phobias elicited by animals in contemporary WEIRD (Western, educated, industrialized, rich, and democratic) populations by their evolutionary past in Africa. Nevertheless, empirical data about fears of animals in the Cradle of Humankind are still fragmentary. To fill this gap, we examined which local animals are perceived as the most frightening by Somali people, who inhabit a markedly similar environment and the region where humans have evolved. We asked 236 raters to rank 42 stimuli according to their elicited fear. The stimuli were standardized pictures of species representing the local fauna. The results showed that the most frightening animals were snakes, scorpions, the centipede, and large carnivores (cheetahs and hyenas). These were followed up by lizards and spiders. Unlike in Europe, spiders represent less salient stimuli than scorpions for Somali respondents in this study. This conforms to the hypothesis suggesting that fear of spiders was extended or redirected from other chelicerates.

Factors influencing carrion communities are only partially consistent with those of deadwood necromass.

Research on decomposer communities has traditionally focused on plant litter or deadwood. Even though carrion forms highly nutrient-rich necromass that enhance ecosystem heterogeneity, the factors influencing saprophytic communities remain largely unknown. For deadwood, experiments have shown that different drivers determine beetles (i.e., decay stage, microclimate, and space), fungi (i.e., decay stage and tree species) and bacteria (decay stage only) assemblages. To test the hypothesis that similar factors also structure carrion communities, we sampled 29 carcasses exposed for 30 days that included Cervus elaphus (N = 6), Capreolus capreolus (N = 18), and Vulpes vulpes (N = 5) in a mountain forest throughout decomposition. Beetles were collected with pitfall traps, while microbial communities were characterized using amplicon sequencing. Assemblages were determined with a focus from rare to dominant species using Hill numbers. With increasing focus on dominant species, the relative importance of carcass identity on beetles and space on bacteria increased, while only succession and microclimate remained relevant for fungi. For beetle and bacteria with focus on dominant species, host identity was more important than microclimate, which is in marked contrast to deadwood. We conclude that factors influencing carrion saprophytic assemblages show some consistency, but also differences from those of deadwood assemblages, suggesting that short-lived carrion and long-lasting deadwood both provide a resource pulse with different adaptions in insects and microbes. As with deadwood, a high diversity of carcass species under multiple decay stages and different microclimates support a diverse decomposer community.

Characterization and Reduction of In-Use CH4 Emissions from a Dual Fuel Marine Engine Using Wavelength Modulation Spectroscopy.

In-use exhaust stream CH4 emissions from two dual fuel marine engines were characterized and strategies for CH4 reduction were identified and evaluated. For this, a low-cost, portable, wavelength modulation spectroscopy (WMS) system was developed. The performance of the developed WMS sensor was assessed using gas standards and demonstrated on a heavy-duty, diesel pilot ignited, direct-injection natural gas research engine through comparison to a flame ionization detector. The WMS sensor was subsequently used to measure the exhaust-stream CH4 concentration from two diesel pilot-ignited, port-injected natural gas engines on a coastal vessel while under normal operation. Using cylinder deactivation to reduce the excess air ratio, λ, and vessel operation changes to minimize operation at lower loads, the total CH4 emission were reduced by up to 33%. The measured, load specific CH4 emissions were subsequently used to identify an improved vessel operation strategy, with an estimated 56-60% reduction in CH4 emissions. These results demonstrate the importance of considering the real-world engine operation profile for accurate estimates of the global warming potential, as well as the utility of a WMS sensor for characterizing and mitigating in-use CH4 emissions.

Estimation of inferior-superior vocal fold kinematics from high-speed stereo endoscopic data in vivo.

Despite being an indispensable tool for both researchers and clinicians, traditional endoscopic imaging of the human vocal folds is limited in that it cannot capture their inferior-superior motion. A three-dimensional reconstruction technique using high-speed video imaging of the vocal folds in stereo is explored in an effort to estimate the inferior-superior motion of the medial-most edge of the vocal folds under normal muscle activation in vivo. Traditional stereo-matching algorithms from the field of computer vision are considered and modified to suit the specific challenges of the in vivo application. Inferior-superior motion of the medial vocal fold surface of three healthy speakers is reconstructed over one glottal cycle. The inferior-superior amplitude of the mucosal wave is found to be approximately 13 mm for normal modal voice, reducing to approximately 3 mm for strained falsetto voice, with uncertainty estimated at σ ≈ 2 mm and σ ≈ 1 mm, respectively. Sources of error, and their relative effects on the estimation of the inferior-superior motion, are considered and recommendations are made to improve the technique.

Optimization of Mechanical Properties and Evaluation of Fatigue Behavior of Selective Laser Sintered Polyamide-12 Components.

In this paper, a comprehensive study of the mechanical properties of selective laser sintered polyamide components is presented, for various different process parameters as well as environmental testing conditions. For the optimization of the static and dynamic mechanical load behavior, different process parameters, e.g., laser power, scan speed, and build temperature, were varied, defining an optimal parameter combination. First, the influence of the different process parameters was tested, leading to a constant energy density for different combinations. Due to similarities in mechanical load behavior, the energy density was identified as a decisive factor, mostly independent of the input parameters. Thus, secondly, the energy density was varied by the different parameters, exhibiting large differences for all levels of fatigue behavior. An optimal parameter combination of 18 W for the laser power and a scan speed of 2666 mm/s was determined, as a higher energy density led to the best results in static and dynamic testing. According to this, the variation in build temperature was investigated, leading to improvements in tensile strength and fatigue strength at higher build temperatures. Furthermore, different ambient temperatures during testing were evaluated, as the temperature-dependent behavior of polymers is of high importance for industrial applications. An increased ambient temperature as well as active cooling during testing was examined, having a significant impact on the high cycle fatigue regime and on the endurance limit.

Intraparenchymal cyst development after deep brain stimulator placement.

Following deep brain stimulation (DBS) surgery, a variety of potential mechanical or functional complications ranging from perioperative events to hardware malfunction may occur. We present 2 patients who developed a unique complication of cyst formation at the tip of the DBS electrode in the absence of infection. One patient had a unilateral ventral intermediate lead placement for essential tremor, and the other had bilateral subthalamic nucleus (STN) placement for Parkinson's disease. After a period of symptom control, at 3 and 8 months after surgery, respectively, both patients developed new neurological deficits and were found to have a cyst at the left DBS lead tip. The right lead in the patient with the bilateral STN implant was without issue. Both affected leads were removed and the problematic symptoms regressed quickly over several days, though the lesion effect on the patients' initial tremor symptoms lasted for months. Bacteriological cultures of the removed electrodes and wounds were negative. We report a rare complication of DBS and show that simply removing the involved lead results in cyst resolution.

The impact of glottal area discontinuities on block-type vocal fold models with asymmetric tissue properties.

Block-type lumped-element models of the vocal folds are widely used for speech investigations due in part to the rich dynamics exhibited over a range of input parameters, particularly for asymmetric tissue properties. While self-consistent in derivation and application, block-type models of the vocal fold masses are inherently susceptible to non-physical aerodynamic loading conditions when vocal fold motion is highly asymmetric. A standard block-type model is compared against two modified models that disallow the non-physiological loading condition. These minor modifications toward a more physiologically relevant aerodynamic model alter the specific vibration regimes and prevalence of chaos, though bifurcations still exist.

Static and Dynamic Mechanical Behaviour of Hybrid-PBF-LB/M-Built and Hot Isostatic Pressed Lattice Structures.

We report on a comprehensive study of the mechanical properties of maraging steel body-centred cubic lattice structures fabricated by a hybrid additive manufacturing technology that combines laser powder bed fusion with in situ high-speed milling. As the mechanical properties of additive manufactured components are inferior to, e.g., cast components, surface modifications can improve the mechanical behaviour. Different hybrid additive manufacturing technologies have been designed using additive and subtractive processes, improving process quality. Following this, mechanical testing is performed with respect to static tensile properties and dynamic stress, hardness, and porosity, comparing specimens manufactured by laser powder bed fusion only to those manufactured by the hybrid approach. In addition, the influence of different heat-treatment techniques on the mechanical behaviour of the lattice structures is investigated, namely solution and aging treatment as well as hot isostatic pressing. Thus, the influence of the superior surface quality due to the hybrid approach is evaluated, leading to, e.g., an offset of about 14-16% for the static testing of HIP lattice structures. Furthermore, the dynamic load behaviour can be improved with a finished surface, heading to a shift of the different zones of fatigue behaviour in the testing of hybrid-built specimens.

Resurrection of Oxythyrea abigailoides Miksic, 1978 (Coleoptera: Scarabaeidae: Cetoniinae) based on new morphological, morphometrical and molecular data.

Oxythyrea abigailoides Miksic, 1978, resurrected species, is removed from synonymy with Oxythyrea dulcis Reitter, 1899 and regarded as a separate species. The differential diagnosis of both species is presented on the basis of clearly different morphological, morphometric and molecular characters. Complete chresonomy to both species is given and known geographical distribution to date is summarized and mapped.

Entyposisfrici (Coleoptera, Scarabaeidae, Melolonthinae), a new species from Somaliland.

Entyposisfrici Bezdek & Sehnal, sp. nov., from Somaliland is described and relevant diagnostic characters are illustrated. The new species is compared with the morphologically closely similar Entyposis Kolbe, 1894 species. An updated checklist and an identification key to northeastern African Entyposis species are provided.

The bigger the threat, the longer the gaze? A cross-cultural study of Somalis and Czechs.

High fear reaction, preferential attention, or fast detection are only a few of the specific responses which snakes evoke in humans. Previous research has shown that these responses are shared amongst several distinct cultures suggesting the evolutionary origin of the response. However, populations from sub-Saharan Africa have been largely missing in experimental research focused on this issue. In this paper, we focus on the effect of snake threat display on human spontaneous attention. We performed an eye-tracking experiment with participants from Somaliland and the Czechia and investigated whether human attention is swayed towards snakes in a threatening posture. Seventy-one Somalis and 71 Czechs were tested; the samples were matched for gender and comparable in age structure and education level. We also investigated the effect of snake morphotype as snakes differ in their threat display. We found that snakes in a threatening posture were indeed gazed upon more than snakes in a relaxed (non-threatening) posture. Further, we found a large effect of snake morphotype as this was especially prominent in cobras, less in vipers, and mostly non-significant in other morphotypes. Finally, despite highly different cultural and environmental backgrounds, the overall pattern of reaction towards snakes was similar in Somalis and Czechs supporting the evolutionary origin of the phenomenon. We concluded that human attention is preferentially directed towards snakes, especially cobras and vipers, in threatening postures.

Are vipers prototypic fear-evoking snakes? A cross-cultural comparison of Somalis and Czechs.

Snakes are known as highly fear-evoking animals, eliciting preferential attention and fast detection in humans. We examined the human fear response to snakes in the context of both current and evolutionary experiences, conducting our research in the cradle of humankind, the Horn of Africa. This region is characterized by the frequent occurrence of various snake species, including deadly venomous viperids (adders) and elapids (cobras and mambas). We conducted experiments in Somaliland and compared the results with data from Czech respondents to address the still unresolved questions: To which extent is human fear of snakes affected by evolutionary or current experience and local culture? Can people of both nationalities recognize venomous snakes as a category, or are they only afraid of certain species that are most dangerous in a given area? Are respondents of both nationalities equally afraid of deadly snakes from both families (Viperidae, Elapidae)? We employed a well-established picture-sorting approach, consisting of 48 snake species belonging to four distinct groups. Our results revealed significant agreement among Somali as well as Czech respondents. We found a highly significant effect of the stimulus on perceived fear in both populations. Vipers appeared to be the most salient stimuli in both populations, as they occupied the highest positions according to the reported level of subjectively perceived fear. The position of vipers strongly contrasts with the fear ranking of deadly venomous elapids, which were in lower positions. Fear scores of vipers were significantly higher in both populations, and their best predictor was the body width of the snake. The evolutionary, cultural, and cognitive aspects of this phenomenon are discussed.

Corrected contact dynamics for the Steinecke and Herzel asymmetric two-mass model of the vocal folds.

The simplified two-mass model of human vocal folds, proposed by Steinecke and Herzel [J. Acoust. Soc. Am. 97(3), 1874-1884 (1995)], has seen widespread use throughout the speech community. Herein, an error is corrected in the contact loadings on colliding vocal folds with asymmetric tissue properties, as arises clinically in cases of unilateral paralysis. A revised contact model is proposed that remediates the erroneous asymmetric contact forces. The vibration regime map presented in Steinecke and Herzel illustrating the dynamical behavior of the system is revised using the corrected collision model.

Bolbaffroides dhofarensis (Coleoptera: Bolboceratidae), a new species from Oman.

Bolbaffroides dhofarensis Krl, Hillert, Mencl Sommer, new species, from Dhofar Governorate in south-western Oman is described. Relevant diagnostic characters (e.g., head and pronotum shape) of the new species and type material of two morphologically similar species, B. rollii (J. Mller, 1941) and B. validus (Klug, 1843) are photographically documented.

Tool Wear and Milling Characteristics for Hybrid Additive Manufacturing Combining Laser Powder Bed Fusion and In Situ High-Speed Milling.

We report on milling and tool wear characteristics of hybrid additive manufacturing comprising laser powder bed fusion and in situ high-speed milling, a particular process in which the cutter mills inside the powder bed without any cooling lubricant being applicable. Flank wear is found to be the dominant wear characteristic with its temporal evolution over utilization period revealing the typical s-shaped dependence. The flank wear land width is measured by microscopy and correlated to the achievable surface roughness of milled 3D-printed parts, showing that for flank wear levels up to 100 µm a superior surface roughness below 3 µm is accessible for hybrid additive manufacturing. Further, based on this correlation recommended tool, life scenarios can be deduced. In addition, by optimizing the finishing tool start position and the number of afore-built layers, the milling process is improved with respect to the maximum millable angle for undercut surfaces of 3D-printed parts to 30° for the roughing process and to 40° for the entire machining process including finishing.

A Case-Control Study of Distinguishing Between Stroke Mimics and True Strokes.

This study was conducted with the primary aim to distinguish patients with a true stroke versus a stroke mimic based on clinical features and imaging. We conducted a retrospective case-control study on 116 adult patients who received alteplase (tPA) to treat acute stroke at our hospital. We further analyzed 79 patients with a normal computed tomography angiography (CTA). Based on their magnetic resonance imaging (MRI) of the brain, they were divided into cases (stroke mimics) and controls (true strokes). Data were collected retrospectively by reviewing individual medical charts on the electronic medical record (EMR), including age, gender, history of stroke, seizure, hypertension, diabetes, atrial fibrillation, hyperlipidemia, presenting NIH Stroke Scale/Score, hemorrhagic conversion, history of migraine, history of depression, sidedness of symptoms and aphasia. Data were categorized to separate those who were later diagnosed to be stroke mimics by being-postictal, encephalopathic, in acute migraine, suffered post-stroke recrudescence (PSR) due to metabolic insult, or had conversion disorder when symptoms could not be attributed to any medical condition or mental illness. Of the 79 study subjects, 48 (60%) were stroke mimics. The mean age of the cohort was 68.67 years, and 46.8% of the study subjects were females. Based on the multivariate logistic regression analysis, factors associated with being a stroke mimic were older age, history of migraine, and a history of prior stroke. In conclusion, increased attention to history and clinical examination as the first step can aid in the proper diagnosis of strokes versus stroke mimics. Identifying stroke mimics early could help expedite hospital workup and prevent inadvertent investigations, reducing hospital occupancy during the ongoing COVID-19 pandemic. We could potentially avoid the administration of tPA to such patients, reducing both the cost and adverse effects of it. Every stroke can cause neurological deficits, but every deficit need not be a stroke.

Do Spiders Ride on the Fear of Scorpions? A Cross-Cultural Eye Tracking Study.

Deep fear of spiders is common in many countries, yet its origin remains unexplained. In this study, we tested a hypothesis based on recent studies suggesting that fear of spiders might stem from a generalized fear of chelicerates or fear of scorpions. To this end, we conducted an eye tracking experiment using a spontaneous gaze preference paradigm, with spiders and scorpions (previously neglected but crucial stimuli) as threatening stimuli and grasshoppers as control stimuli. In total, 67 participants from Somaliland and 67 participants from the Czech Republic were recruited and presented with a sequence of paired images. Both Somali and Czech people looked longer (total duration of the gaze) and more often (number of fixations) on the threatening stimuli (spiders and scorpions) when presented with a control (grasshopper). When both threatening stimuli were presented together, Somali participants focused significantly more on the scorpion, whereas in Czech participants, the effect was less pronounced, and in Czech women it was not significant. This supports the hypothesis that fear of spiders originated as a generalized fear of scorpions. Moreover, the importance of spiders as fear-eliciting stimuli may be enhanced in the absence of scorpions in the environment.

Dung-visiting beetle diversity is mainly affected by land use, while community specialization is driven by climate.

Dung beetles are important actors in the self-regulation of ecosystems by driving nutrient cycling, bioturbation, and pest suppression. Urbanization and the sprawl of agricultural areas, however, destroy natural habitats and may threaten dung beetle diversity. In addition, climate change may cause shifts in geographical distribution and community composition. We used a space-for-time approach to test the effects of land use and climate on α-diversity, local community specialization (H 2') on dung resources, and γ-diversity of dung-visiting beetles. For this, we used pitfall traps baited with four different dung types at 115 study sites, distributed over a spatial extent of 300 km × 300 km and 1000 m in elevation. Study sites were established in four local land-use types: forests, grasslands, arable sites, and settlements, embedded in near-natural, agricultural, or urban landscapes. Our results show that abundance and species density of dung-visiting beetles were negatively affected by agricultural land use at both spatial scales, whereas γ-diversity at the local scale was negatively affected by settlements and on a landscape scale equally by agricultural and urban land use. Increasing precipitation diminished dung-visiting beetle abundance, and higher temperatures reduced community specialization on dung types and γ-diversity. These results indicate that intensive land use and high temperatures may cause a loss in dung-visiting beetle diversity and alter community networks. A decrease in dung-visiting beetle diversity may disturb decomposition processes at both local and landscape scales and alter ecosystem functioning, which may lead to drastic ecological and economic damage.

Bolbelasmus (Bolbelasmus) zagrosensis (Coleoptera: Scarabaeoidea: Bolboceratidae), a new species from Iran, along with an updated key to the western Palaearctic species of the subgenus.

Bolbelasmus (Bolbelasmus) zagrosensis Sommer, Hillert, Hruzová Král, new species, from Iran is described, illustrated and compared with its congeners known from the western Palaearctic region. An updated key to the western Palaearctic species of the nominotypical subgenus is provided. New country record of B. (B.) nireus (Reitter, 1895) from Greece (island of Rhodes) is reported. Distribution of B. (B.) makrisi Miessen, 2011, B. (B.) nireus and the new species is summarized and mapped.

emOiceoptoma/em emtangi/em (Coleoptera: Silphidae: Silphinae), a new species of carrion beetle from eastern China.

A new species, Oiceoptoma tangi Sommer, Ruzicka, Nishikawa Schneider, new species, from Zhejiang Province, China, is described and illustrated. The new species is closely related to O. subrufum (Lewis, 1888), distributed in Central and North-eastern China, the Korean Peninsula, Far East of Russia and Japan, and to O. nigropunctatum (Lewis, 1888), endemic to Japan. All three species are keyed, and distribution maps of all three species are presented.