RESUMO
A soluble, green-blue fluorescent, π-extended azatrioxa[8]circulene was synthesized by oxidative condensation of a 3,6-dihydroxycarbazole and 1,4-anthraquinone by using benzofuran scaffolding. This is the first circulene to incorporate anthracene within its carbon framework. Solvent-dependent fluorescence and bright green electroluminescence accompanied by excimer emission are the key optical properties of this material. The presence of sliding π-stacked columns in the single crystal of dianthracenylazatrioxa[8]circulene is found to cause a very high electron-hopping rate, thus making this material a promising n-type organic semiconductor with an electron mobility predicted to be around 2.26â cm2 V-1 s-1 . The best organic light-emitting diode (OLED) device based on the dianthracenylazatrioxa[8]circulene fluorescent emitter has a brightness of around 16 000â Cd m-2 and an external quantum efficiency of 3.3 %. Quantum dot-based OLEDs were fabricated by using dianthracenylazatrioxa[8]circulene as a host matrix material.
RESUMO
The synthesis of four 4-(carbazolyl-R-benzoyl)-5-CF3-1H-1,2,3-triazoles with extra groups ((3-methyl)-phenyl-, 4-fluorophenyl-, quinolinyl-, or (3-trifluoromethyl)-phenyl-) in the acceptor fragment has been reported. The effects of substituents with different electron-withdrawing strengths on the thermal, electrochemical, photophysical, and electroluminescence properties of the synthesized compounds are discussed. The results of X-ray analyses and density functional theory (DFT) calculations support unusual molecular packing and electronic properties. The compounds are capable of glass formation with glass transition temperatures ranging from 54-84 °C. Ionization potentials of the compounds are in the range of 5.98-6.22 eV and electron affinities range from 3.09 to 3.35 eV. Under ultraviolet excitation, the neat films of the compounds exhibit blue emission with photoluminescence quantum yields ranging from 18 to 27%. The films of selected compounds are used for the preparation of host-free light-emitting layers of organic light-emitting diodes with very simple device structures and an external quantum efficiency of 4.6%.
RESUMO
Development of emissive materials for utilization in organic light-emitting diodes (OLEDs) remains a highly relevant research field. One of the most important aspects in the development of efficient emitters for OLEDs is the efficiency of triplet-to-singlet exciton conversion. There are many concepts proposed for the transformation of triplet excitons to singlet excitons, among which thermally activated delayed fluorescence (TADF) is the most efficient and widespread. One of the variations of the TADF concept is the hot exciton approach according to which the process of exciton relaxation into the lowest energy electronic state (internal conversion as usual) is slower than intersystem crossing between high-lying singlets and triplets. In this paper, we present the donor-acceptor materials based on 2-pyridone acceptor coupled to the different donor moieties through the phenyl linker demonstrating good performance as components of sky-blue, green-yellow, and white OLEDs. Despite relatively low photoluminescence quantum yields, the compound containing 9,9-dimethyl-9,10-dihydroacridine donor demonstrated very good efficiency in sky-blue OLED with the single emissive layer, which showed an external quantum efficiency (EQE) of 3.7%. It also forms a green-yellow-emitting exciplex with 4,4',4â³-tris[phenyl(m-tolyl)amino]triphenylamine. The corresponding OLED showed an EQE of 6.9%. The white OLED combining both exciplex and single emitter layers demonstrated an EQE of 9.8% together with excellent current and power efficiencies of 16.1 cd A-1 and 6.9 lm W-1, respectively. Quantum-chemical calculations together with the analysis of photoluminescence decay curves confirm the ability of all of the studied compounds to exhibit TADF through the hot exciton pathway, but the limiting factor reducing the efficiency of OLEDs is the low photoluminescence quantum yields caused mainly by nonradiative intersystem crossing dominating over the radiative fluorescence pathway.
RESUMO
Elaboration of the appropriate host materials proved to be not less important for the fabrication of a highly efficient OLED than the design of emitters. In the present work, we show how by simple variation of molecular structure both blue emitters exhibiting delayed fluorescence and ambipolar high triplet energy hosts can be obtained. The compounds with a para-junction revealed higher thermal stability (TID up to 480 °C), lower ionization potentials (5.51-5.60 eV), exclusively hole transport, and higher photoluminescence quantum efficiencies (0.90-0.97). Meta-linkage leads to ambipolar charge transport and higher triplet energies (2.82 eV). Introduction of the accepting nitrile groups in the para-position induces intensive delayed fluorescence via a triplet-triplet annihilation up-conversion mechanism. By utilization of the para-substituted derivative as an emitter and the meta-substituted isomer as the host, a deep-blue OLED with the external quantum efficiency of 14.1% was fabricated.
RESUMO
A new interface engineering method is demonstrated for the preparation of an efficient white organic light-emitting diode (WOLED) by embedding an ultrathin layer of the novel ambipolar red emissive compound 4,4-difluoro-2,6-di(4-hexylthiopen-2-yl)-1,3,5,7,8-pentamethyl-4-bora-3a,4a-diaza-s-indacene (bThBODIPY) in the exciplex formation region. The compound shows a hole and electron mobility of 3.3 × 10-4 and 2 × 10-4 cm2 V-1 s-1, respectively, at electric fields higher than 5.3 × 105 V cm-1. The resulting WOLED exhibited a maximum luminance of 6579 cd m-2 with CIE 1931 color coordinates (0.39; 0.35). The bThBODIPY dye is also demonstrated to be an effective laser dye for a cholesteric liquid crystal (ChLC) laser. New construction of the ChLC laser, by which a flat capillary with an optically isotropic dye solution is sandwiched between two dye-free ChLC cells, provides photonic lasing at a wavelength well matched with that of a dye-doped planar ChLC cell.
RESUMO
We fabricated a yellow organic light-emitting diode (OLED) based on the star-shaped donor compound tri(9-hexylcarbazol-3-yl)amine, which provides formation of the interface exciplexes with the iridium(III) bis[4,6-difluorophenyl]-pyridinato-N,C2']picolinate (FIrpic). The exciplex emission is characterized by a broad band and provides a condition to realize the highly effective white OLED. It consists of a combination of the blue phosphorescent emission from the FIrpic complex and a broad efficient delayed fluorescence induced by thermal activation with additional direct phosphorescence from the triplet exciplex formed at the interface. The fabricated exciplex-type device exhibits a high brightness of 38â¯000 cd/m(2) and a high external quantum efficiency.