RESUMO
Quantum cascade detectors (QCDs) are devices operating at zero external bias with a low dark-current. They show linear detection and high saturation intensities, making them suitable candidates for heterodyne detection in long-wave infrared (LWIR) free space optical communication systems. We present an approach to mitigate the performance limitation at long wavelengths, by a comparison of similar single and multi-period QCDs for optimizing their responsivity and noise behaviour. Our InGaAs/InAlAs/InP ridge QCDs are designed for operation at λ = 9.124 µm. Optical waveguide simulations support the accurate optical characterization. A detailed device analysis reveals room-temperature responsivities of 111 mA/W for the 15-period and 411 mA/W for the single-period device.
RESUMO
Interband cascade infrared photodetectors (ICIPs) combine interband optical transitions with fast intraband transport to achieve high-frequency and broad-wavelength operation at room temperature. Here we study the bias-dependent electronic impulse response of ICIPs with a mid-infrared synchronously pumped optical parametric oscillator (OPO). Since the OPO produces ultrashort 104-fs pulses, it is possible to probe the impulse response of the ICIP. From this impulse response, we identify two characteristic decay times, indicating the contribution of electron as well as hole carriers. A reverse bias voltage applied to the ICIP reduces both time scales and leads to an increased electrical cut-off frequency. The OPO emits up to 500 mW average power, of which up to 10 mW is directed to the ICIP in order to test its saturation characteristics under short-pulse illumination. The peak of the impulse response profile as well as the average photocurrent experience a gradual saturation behavior, and we determine the corresponding saturation powers by measuring the photo-response as a function of average power directed to the ICIP. We demonstrate that an increasing reverse bias increases the saturation power as well as the responsivity of the ICIP.
RESUMO
We present the design simulation and characterization of a quantum cascade detector operating at 4.3µm wavelength. Array integration and packaging processes were investigated. The device operates in the 4.3µm CO2 absorption region and consists of 64 pixels. The detector is designed fully compatible to standard processing and material growth methods for scalability to large pixel counts. The detector design is optimized for a high device resistance at elevated temperatures. A QCD simulation model was enhanced for resistance and responsivity optimization. The substrate illuminated pixels utilize a two dimensional Au diffraction grating to couple the light to the active region. A single pixel responsivity of 16mA/W at room temperature with a specific detectivity D* of 5â 107 cmHz/W was measured.
RESUMO
A diagonal optically active transition in a quantum cascade detector is introduced as optimization parameter to obtain quality factor matching between a photodetector and a cavity. A more diagonal transition yields both higher extraction efficiency and lower noise, while the reduction of the absorption strength is compensated by the resonant cavity. The theoretical limits of such a scheme are obtained, and the impact of losses and cavity processing variations are evaluated. By optimizing the quantum design for a high quality cavity, a specific detectivity of 10(9) Jones can be calculated for λ = 8µm and T = 300K.
RESUMO
We measure the Hall conductivity of a two-dimensional electron gas formed at a GaAs/AlGaAs heterojunction in the terahertz regime close to the cyclotron resonance frequency using highly sensitive Faraday rotation measurements. The sample is electrically gated, allowing the electron density to be changed continuously by more than a factor of 3. We observe clear plateaulike and steplike features in the Faraday rotation angle vs electron density and magnetic field (Landau-level filling factor) even at fields or frequencies very close to cyclotron resonance absorption. These features are the high frequency manifestation of quantum Hall plateaus-a signature of topologically protected edge states. We observe both odd and even filling factor plateaus and explore the temperature dependence of these plateaus. Although dynamical scaling theory begins to break down in the frequency region of our measurements, we find good agreement with theory.
RESUMO
We report on gallium droplet nucleation on silicon (100) substrates with and without the presence of the native oxide. The gallium deposition is carried out under ultra-high vacuum conditions at temperatures between 580 and 630 °C. The total droplet volume, obtained from a fit to the diameter-density relation, is used for sample analysis on clean silicon surfaces. Through a variation of the 2D equivalent Ga thickness, the droplet diameter was found to be between 250-1000 nm. Longer annealing times resulted in a decrease of the total droplet volume. Substrate temperatures of 630 °C and above led to Ga etching into the Si substrates and caused Si precipitation around the droplets. In contrast, we obtained an almost constant diameter distribution around 75 nm over a density range of more than two orders of magnitude in the presence of a native oxide layer. Furthermore, the droplet nucleation was found to correlate with the density of surface features on the 'epi-ready' wafer.
RESUMO
We report on the design, fabrication and optical characterization of GaN/AlN quantum-dot-based waveguides for all-optical switching via intraband absorption saturation at 1.55 µm. The transmittance of the TM-polarized light increases with the incident optical power due to the saturation of the s-p(z) intraband absorption in the QDs. Single-mode waveguides with a ridge width of 2 µm and a length of 1.5 mm display 10 dB absorption saturation of the TM-polarized light for an input pulse energy of 8 pJ and 150 fs.
RESUMO
In this Letter we present the electrical and electro-optical characterization of single crystalline germanium nanowires (NWs) under tensile strain conditions. The measurements were performed on vapor-liquid-solid (VLS) grown germanium (Ge) NWs, monolithically integrated into a micromechanical 3-point strain module. Uniaxial stress is applied along the ⟨111⟩ growth direction of individual, 100 nm thick Ge NWs while at the same time performing electrical and optical characterization at room temperature. Compared to bulk germanium, an anomalously high and negative-signed piezoresistive coefficient has been found. Spectrally resolved photocurrent characterization on strained NWs gives experimental evidence on the strain-induced modifications of the band structure. Particularly we are revealing a rapid decrease in resistivity and a red-shift in photocurrent spectra under high strain conditions. For a tensile strain of 1.8%, resistivity decreased by a factor of 30, and the photocurrent spectra shifted by 88 meV. Individual stressed NWs are recognized as an ideal platform for the exploration of strain-related electronic and optical effects and may contribute significantly to the realization of novel optoelectronic devices, strain-enhanced field-effect transistors (FETs), or highly sensitive strain gauges.
RESUMO
We demonstrate terahertz quantum-cascade lasers with a 30 µm thick double-metal waveguide, which are fabricated by stacking two 15 µm thick active regions using a wafer bonding process. By increasing the active region thickness more optical power is generated inside the cavity, the waveguide losses are decreased and the far-field is improved due to a larger facet aperture. In this way the output power is increased by significantly more than a factor of 2 without reducing the maximum operating temperature and without increasing the threshold current.
Assuntos
Lasers , Teoria Quântica , Refratometria/instrumentação , Radiação Terahertz , Desenho de Equipamento , Análise de Falha de EquipamentoRESUMO
We characterize the performance of a quantum well infrared photodetector (QWIP), which is fabricated as a photonic crystal slab (PCS) resonator. The strongest resonance of the PCS is designed to coincide with the absorption peak frequency at 7.6 µm of the QWIP. To accurately characterize the detector performance, it is illuminated by using single mode mid-infrared lasers. The strong resonant absorption enhancement yields a detectivity increase of up to 20 times. This enhancement is a combined effect of increased responsivity and noise current reduction. With increasing temperature, we observe a red shift of the PCS-QWIP resonance peak of -0.055 cm(-1)/K. We attribute this effect to a refractive index change and present a model based on the revised plane wave method.
Assuntos
Lasers , Fotometria/instrumentação , Transdutores , Desenho de Equipamento , Análise de Falha de Equipamento , Raios Infravermelhos , Teoria Quântica , Razão Sinal-RuídoRESUMO
We present a method of coupling free-space terahertz radiation to intersubband transitions in semiconductor quantum wells using an array of meta-atoms. Owing to the resonant nature of the interaction between metamaterial and incident light and the field enhancement in the vicinity of the metal structure, the coupling efficiency of this method is very high and the energy conversion ratio from in-plane to z field reaches values on the order of 50%. To identify the role of different aspects of this coupling, we have used a custom-made finite-difference time-domain code. The simulation results are supplemented by transmission measurements on modulation-doped GaAs/AlGaAs parabolic quantum wells which demonstrate efficient strong light-matter coupling between meta-atoms and intersubband transitions for normal incident electromagnetic waves.
Assuntos
Modelos Teóricos , Radiação Terahertz , Simulação por Computador , Teoria Quântica , Espalhamento de RadiaçãoRESUMO
We present an experimental and theoretical study of the optical properties of metal-dielectric-metal structures with patterned top metallic surfaces, in the THz frequency range. When the thickness of the dielectric slab is very small with respect to the wavelength, these structures are able to support strongly localized electromagnetic modes, concentrated in the subwavelength metal-metal regions. We provide a detailed analysis of the physical mechanisms which give rise to these photonic modes. Furthermore, our model quantitatively predicts the resonance positions and their coupling to free space photons. We demonstrate that these structures provide an efficient and controllable way to convert the energy of far field propagating waves into near field energy.
Assuntos
Raios Infravermelhos , Óptica e Fotônica/instrumentação , Semicondutores , Ressonância de Plasmônio de Superfície/instrumentação , Impedância Elétrica , Campos Eletromagnéticos , Elétrons , Metais , Modelos TeóricosRESUMO
The regime of ultrastrong light-matter interaction has been investigated theoretically and experimentally, using zero-dimensional electromagnetic resonators coupled with an electronic transition between two confined states of a semiconductor quantum well. We have measured a splitting between the coupled modes that amounts to 48% of the energy transition, the highest ratio ever observed in a light-matter coupled system. Our analysis, based on a microscopic quantum theory, shows that the nonlinear polariton splitting, a signature of this regime, is a dynamical effect arising from the self-interaction of the collective electronic polarization with its own emitted field.
RESUMO
Spectral fingerprints of molecules are mostly accessible in the terahertz (THz) and mid-infrared ranges, such that efficient molecular-detection technologies rely on broadband coherent light sources at such frequencies. If THz Quantum Cascade Lasers can achieve octave-spanning bandwidth, their tunability and wavelength selectivity are often constrained by the geometry of their cavity. Here we introduce an adaptive control scheme for the generation of THz light in Quantum Cascade Random Lasers, whose emission spectra are reshaped by applying an optical field that restructures the permittivity of the active medium. Using a spatial light modulator combined with an optimization procedure, a beam in the near infrared (NIR) is spatially patterned to transform an initially multi-mode THz random laser into a tunable single-mode source. Moreover, we show that local NIR illumination can be used to spatially sense complex near-field interactions amongst modes. Our approach provides access to new degrees of freedom that can be harnessed to create broadly-tunable sources with interesting potential for applications like self-referenced spectroscopy.
RESUMO
Strange metal behavior is ubiquitous in correlated materials, ranging from cuprate superconductors to bilayer graphene, and may arise from physics beyond the quantum fluctuations of a Landau order parameter. In quantum-critical heavy-fermion antiferromagnets, such physics may be realized as critical Kondo entanglement of spin and charge and probed with optical conductivity. We present terahertz time-domain transmission spectroscopy on molecular beam epitaxy-grown thin films of YbRh2Si2, a model strange-metal compound. We observed frequency over temperature scaling of the optical conductivity as a hallmark of beyond-Landau quantum criticality. Our discovery suggests that critical charge fluctuations play a central role in the strange metal behavior, elucidating one of the long-standing mysteries of correlated quantum matter.
RESUMO
We present the design and the realization of active photonic crystal (PhC) semiconductor lasers. The PhC consists of semiconductor nanostructure pillars which provide gain at a quantized transition energy. The vertical layer sequence is that of a terahertz quantum cascade laser. Thereby, the artificial crystal itself provides the optical gain and the lateral confinement. The cavities do not rely on a central defect, the lasing is observed in flat-band regions at high symmetry points. The experimental results are in excellent agreement with the finite-difference time-domain simulations. For the vertical confinement a double-metal waveguide is used. The lasers are showing a stable single-mode emission under all driving conditions. Varying the period of the PhC allows to tune the frequency by 400 GHz.
RESUMO
We have studied the coherent intercavity coupling of the evanescent fields of two microdisk terahertz quantum-cascade lasers. The electrically controllable optical coupling of the single-mode operating lasers has been observed for cavity spacings up to 30 mum. The strongest coupled photonic molecule with 2 mum intercavity spacing allows to conditionally switch the optical emission by the electrical modulation of only one microdisk. The lasing threshold characteristics demonstrate the linear dependence of the gain of a quantum-cascade laser on the applied electric field.
Assuntos
Eletrônica/instrumentação , Lasers , Refratometria/instrumentação , Transdutores , Desenho Assistido por Computador , Desenho de Equipamento , Análise de Falha de Equipamento , Miniaturização , Fótons , Reprodutibilidade dos Testes , Sensibilidade e EspecificidadeRESUMO
We present the design and the fabrication of photonic crystals with a complete bandgap for TM-modes used as a resonator for terahertz quantum-cascade lasers (QCL), which are lasing around 2.7 THz. The emission of the devices with and without a photonic crystal shows a shift in the emission from the gain maximum to the bandgap of the crystal. The devices are built up by a core, which provides the optical gain, and by a surrounding photonic crystal, which acts as a frequency selective mirror. The whole device is processed into a double-metal waveguide.
RESUMO
In this work, we introduce a two color, low intensity photocurrent feedback method for photocurrent spectroscopy utilizing an atomic force microscope (AFM). In most applications, measurements with weak optical excitations are not feasible with an AFM because the powerful AFM feedback laser severely disturbs the measurements. Therefore, we have developed a feedback system based on the pressure dependent Schottky barrier height at the tip-sample interface. The versatility of the new feedback system is demonstrated by recording high resolution photocurrent spectra on GaAsInAs heterostructures.