RESUMO
Robust ferroelectricity in nanoscale fluorite oxide-based thin films enables promising applications in silicon-compatible non-volatile memories and logic devices. However, the polar orthorhombic (O) phase of fluorite oxides is a metastable phase that is prone to transforming into the ground-state non-polar monoclinic (M) phase, leading to macroscopic ferroelectric degradation. Here we investigate the reversibility of the O-M phase transition in ZrO2 nanocrystals via in situ visualization of the martensitic transformation at the atomic scale. We reveal that the reversible shear deformation pathway from the O phase to the monoclinic-like (M') state, a compressive-strained M phase, is protected by 90° ferroelectric-ferroelastic switching. Nevertheless, as the M' state gradually accumulates localized strain, a critical tensile strain can pin the ferroelastic domain, resulting in an irreversible M'-M strain relaxation and the loss of ferroelectricity. These findings demonstrate the key role of ferroelastic switching in the reversibility of phase transition and also provide a tensile-strain threshold for stabilizing the metastable ferroelectric phase in fluorite oxide thin films.
RESUMO
Alloying-type anode materials provide high capacity for lithium-ion batteries; however, they suffer pulverization problems resulting from the volume change during cycling. Realizing the cycling reversibility of these anodes is therefore critical for sustaining their electrochemical performance. Here, we investigate the structural reversibility of Sn NPs during cycling at atomic-level resolution utilizing in situ high-resolution TEM. We observed a surprisingly near-perfect structural reversibility after a complete cycle. A three-step phase transition happens during lithiation, accompanied by the generation of a significant number of defects, grain boundaries, and up to 202% volume expansion. In subsequent delithiation, the volume, morphology, and crystallinity of the Sn NPs were restored to their initial state. Theoretical calculations show that compressive stress drives the removal of vacancies generated within the NPs during delithiation, therefore maintaining their intact morphology. This work demonstrates that removing vacancies during cycling can efficiently improve the structural reversibility of high-capacity anode materials.
RESUMO
The redox transition between iron and its oxides is of the utmost importance in heterogeneous catalysis, biological metabolism, and geological evolution. The structural characteristics of this reaction may vary based on surrounding environmental conditions, giving rise to diverse physical scenarios. In this study, we explore the atomic-scale transformation of nanosized Fe3O4 under ambient-pressure H2 gas using in-situ environmental transmission electron microscopy. Our results reveal that the internal solid-state reactions dominated by iron diffusion are coupled with the surface reactions involving gaseous O or H species. During reduction, we observe two competitive reduction pathways, namely Fe3O4 â FeO â Fe and Fe3O4 â Fe. An intermediate phase with vacancy ordering is observed during the disproportionation reaction of Fe2+ â Fe0 + Fe3+, which potentially alleviates stress and facilitates ion migration. As the temperature decreases, an oxidation process occurs in the presence of environmental H2O and trace amounts of O2. A direct oxidation of Fe to Fe3O4 occurs in the absence of the FeO phase, likely corresponding to a change in the water vapor content in the atmosphere. This work elucidates a full dynamical scenario of iron redox under realistic conditions, which is critical for unraveling the intricate mechanisms governing the solid-solid and solid-gas reactions.
RESUMO
Surface polarization under harsh electrochemical environments usually puts catalysts in a thermodynamically unstable state, which strictly hampers the thermodynamic stability of Pt-based catalysts in high-performance fuel cells. Here, we report a strategy by introducing electron buffers (variable-valence metals, M = Ti, V, Cr, and Nb) into intermetallic Pt alloy nanoparticle catalysts to suppress the surface polarization of Pt shells using the structurally ordered L10-M-PtFe as a proof of concept. Operando X-ray absorption spectra analysis suggests that with the potential increase, electron buffers, especially Cr, could facilitate an electron flow to form a electron-enriched Pt shell and thus weaken the surface polarization and tensile Pt strain. The best-performing L10-Cr-PtFe/C catalyst delivers superb oxygen reduction reaction (ORR) activity (mass activity = 1.41/1.02 A mgPt-1 at 0.9 V, rated power density = 14.0/9.2 W mgPt-1 in H2-air under a total Pt loading of 0.075/0.125 mgPt cm-2, respectively) and stability (20 mV voltage loss at 0.8 A cm-2 after 60,000 cycles of accelerated durability test) in a fuel cell cathode, representing one of the best reported ORR catalysts. Density functional theory calculations reveal that the optimized surface strain by introducing Cr on L10-PtFe/C accounts for the enhanced ORR activity, and the durability enhancement stems from the charge transfer contribution of Cr to the Pt shells and the increased kinetic energy barrier for Pt dissolution/Fe diffusion.
RESUMO
The interfacial species-built local environments on Cu surfaces impact the CO2 electroreduction process significantly in producing value-added multicarbon (C2+) products. However, intricate interfacial dynamics leads to a challenge in understanding how these species affect the process. Herein, with ab initio molecular dynamics (AIMD) and finite element method (FEM) simulations, we reveal that the highly concentrated interfacial species, including the *CO, hydroxide, and K+, could synergistically promote the C-C coupling on the one-dimensional (1D) porous hollow structure regulated interfacial environment. The Cu-Ag tandem catalyst was then synthesized with the as-designed structure, exhibiting a high C2+ Faradaic efficiency of 76.0% with a partial current density of 380.0 mA cm-2 in near-neutral electrolytes. Furthermore, in situ Raman spectra validate that the 1D porous structure regulates the concentration of interfacial CO intermediates and ions to increase *CO coverage, local pH value, and ionic field, promoting the CO2-to-C2+ activity. These results provide insights into the design of practical ECR electrocatalysts by regulating interfacial species-induced local environments.
RESUMO
The doping strategy effectively enhances the capacity and cycling stability of cobalt-free nickel-rich cathodes. Understanding the intrinsic contributions of dopants is of great importance to optimize the performances of cathodes. This study investigates the correlation between the structure modification and their performances of Mo-doped LiNi0.8Mn0.2O2 (NM82) cathode. The role of doped Mo's valence state has been proved functional in both lattice structural modification and electronic state adjustment. Although the high-valence of Mo at the cathode surface inevitably reduces Ni valence for electronic neutrality and thus causes ion mixing, the original Mo valence will influence its diffusion depth. Structural analyses reveal Mo doping leads to a mixed layer on the surface, where high-valence Mo forms a slender cation mixing layer, enhancing structural stability and Li-ion transport. In addition, it is found that the high-valence dopant of Mo6+ ions partially occupies the unfilled 4d orbitals, which may strengthen the MoâO bond through increased covalency and therefore reduce the oxygen mobility. This results in an impressive capacity retention (90.0% after 200 cycles) for Mo-NM82 cathodes with a high Mo valence state. These findings underscore the valence effect of doping on layered oxide cathode performance, offering guidance for next-generation cathode development.
RESUMO
BACKGROUND: Traditional sun-drying aquatic products are popular and recognized by customers, owing to their unique flavor and long-term preservation. However, the product quality and production efficiency cannot be guaranteed. Cololabis saira is rich in unsaturated fatty acids, which are susceptible to hyperoxidation during the drying process. This study aimed to make clear the role of ultraviolet (UV) radiation in flavor formation during drying processes of Cololabis saira to develop a modern drying technology. RESULTS: Lipid oxidation analysis revealed that moderate hydrolytic oxidation occurred in the UV-assisted cold-air drying group due to the combined influence of UV and cold-air circulation, resulting in the thiobarbituric acid reactive substances value being higher than that of cold-air drying group but lower than the natural drying group. Hexanal, heptanal, cis-4-heptenal, octanal, nonanal, (trans,trans)-2,4-heptadienal, (trans,trans)-2,6-nonanedial, 1-octen-3-ol, heptanol, 2,3-pentanedione, 3,5-octadien-2-one and trimethylamine were identified as the characteristic flavor odor-active compounds present in all Cololabis saira samples. Yet, during the natural drying process, sunlight promoted the lipid oxidation, resulting in the highest degree of lipid oxidation among three drying methods. Light and heat promoted lipid oxidation in Cololabis saira prepared through natural drying process, leading to a large accumulation of volatile compounds, such as 3-methylbutyraldehyde, 2,3-pentanedione, 1-propanol, and 3-pentanone. Cold air circulation inhibited lipid oxidation to some extent, resulting in a blander flavor profile. More cis-4-heptenal, cis-2-heptenal, octanal and 2-ethylfuran accumulated during the UV-assisted cold-air drying process, enriching its greasy flavor and burnt flavor. CONCLUSION: UV-assisted cold-air drying could promote moderate lipid oxidation, which is beneficial for improving product flavor. To sum up, UV radiation played a crucial role in the flavor formation during the drying process of Cololabis saira. © 2024 Society of Chemical Industry.
RESUMO
To address the lack of theoretical guidance for sponge city construction (SCC) in China, this study introduces a method to evaluate the available water volume (AWV) in urban watersheds. This evaluation is based on the water balance relationship, water volume, and ecological water demand (EWD). The Xi'an urban area was selected as a case study due to its water shortage and flooding issues. Results show monthly surface and subsurface AWV ranging between 53.06 and 53.98 million m3 and between 8,701.89 and 8,898.14 million m3, respectively. By maximizing the potential for surface AWV, an annual water supply of 527.75 million m3 could be provided, surpassing the annual artificial water consumption of 394.20 million m3, effectively addressing water scarcity. During the rainy season, implementing measures such as employing permeable paving materials, establishing wetlands and rainwater gardens, and constructing lakes and reservoirs can mitigate flooding caused by rainfall exceeding 32.8 mm. While the subsurface space in Xi'an holds significant potential for subsurface AWV utilization, revitalizing the ecological environment of subsurface water is crucial. Overall, the AWV theoretical framework offers a comprehensive solution to water shortage and flooding issues in the Xi'an urban area, serving as a vital theory for SCC.
Assuntos
Inundações , Lagos , China , Chuva , ÁguaRESUMO
Halide solid electrolytes, known for their high ionic conductivity at room temperature and good oxidative stability, face notable challenges in all-solid-state Li-ion batteries (ASSBs), especially with unstable cathode/solid electrolyte (SE) interface and increasing interfacial resistance during cycling. In this work, we have developed an Al3+-doped, cation-disordered epitaxial nanolayer on the LiCoO2 surface by reacting it with an artificially constructed AlPO4 nanoshell; this lithium-deficient layer featuring a rock-salt-like phase effectively suppresses oxidative decomposition of Li3InCl6 electrolyte and stabilizes the cathode/SE interface at 4.5â V. The ASSBs with the halide electrolyte Li3InCl6 and a high-loading LiCoO2 cathode demonstrated high discharge capacity and long cycling life from 3 to 4.5â V. Our findings emphasize the importance of specialized cathode surface modification in preventing SE degradation and achieving stable cycling of halide-based ASSBs at high voltages.
RESUMO
Developing non-platinum group metal catalysts for the sluggish hydrogen oxidation reaction (HOR) is critical for alkaline fuel cells. To date, Ni-based materials are the most promising candidates but still suffer from insufficient performance. Herein, we report an unconventional hcp/fcc Ni (u-hcp/fcc Ni) heteronanocrystal with multiple epitaxial hcp/fcc heterointerfaces and coherent twin boundaries, generating rugged surfaces with plenty of asymmetric convex sites. Systematic analyses discover that such convex sites enable the adsorption of *H in unusual bridge positions with weakened binding energy, circumventing the over-strong *H adsorption on traditional hollow positions, and simultaneously stabilizing interfacial *H2O. It thus synergistically optimizes the HOR thermodynamic process as well as reduces the kinetic barrier of the rate-determining Volmer step. Consequently, the developed u-hcp/fcc Ni exhibits the top-rank alkaline HOR activity with a mass activity of 40.6 mA mgNi-1 (6.3 times higher than fcc Ni control) together with superior stability and high CO-tolerance. These results provide a paradigm for designing high-performance catalysts by shifting the adsorption state of intermediates through configuring surface sites.
RESUMO
OBJECTIVE: To detect the expression of plasma exosomal microRNA (miRNA) in systemic sclerosis (SSc), and to investigate its clinical significance. METHODS: A total of 20 patients who were initially diagnosed with SSc and did not receive medication in Department of Rheumatology and Immunology of Meizhou People' s Hospital from January 2020 to January 2022 were recruited, as well as 15 healthy individuals whose gender and age matched with those of the SSc patients. Plasma exosomes were isolated using ultracentrifugation method. The expression levels of exosomal miR-34-5p, miR-92-3p and miR-142-3p were detected by quantative real-time polymerase chain reaction (qRT-PCR). Correlations between the expression levels of exosomal miRNAs and clinical characteristic were analyzed by Spearman's rank correlation coefficient test. RESULTS: The mean age of 20 patients with SSc was (52.6±12.6) years, including 7 males and 13 females. Among the 20 SSc patients, 13 cases were diagnosed as limited cutaneous systemic sclerosis (lcSSc) and 7 cases were diagnosed as diffuse cutaneous systemic sclerosis (dcSSc) according to the extent of skin involvement. According to the findings of high resolution chest CT, 7 of 20 SSc patients were diagnosed with interstitial lung disease (ILD) and 13 SSc patients were diagnosed with non-ILD. The expression levels of exosomal miR-34-5p, miR-92-3p and miR-142-3p were significantly elevated in the SSc patients compared with those in the healthy controls group (P=0.003, P=0.000 1, and P=0.016, respectively). Compared with the SSc patients without ILD, the expression levels of miR-34-5p and miR-142-3p were significantly lower in the SSc patients with ILD (P=0.037 and P=0.015, respectively). The expression levels of exosomal miR-34-5p and miR-142-3p showed negative correlation with ILD (r=-0.48, P=0.031 and r=-0.55, P=0.011, respectively), and arthritis (r=-0.46, P=0.040 and r=-0.48, P=0.032, respectively). The expression levels of exosomal miR-142-3p showed a negative correlation with erythrocyte sedimentation rate (ESR) (r=-0.55, P=0.012). CONCLUSION: Plasma exosomal miR-34-5p, miR-92-3p and miR-142-3p were dysregulated in SSc. The dyregulation of exosomal miR-34-5p and miR-142-3p showed correlation with SSc associated ILD (SSc-ILD).
Assuntos
Doenças Pulmonares Intersticiais , MicroRNAs , Escleroderma Sistêmico , Masculino , Feminino , Humanos , Adulto Jovem , Adulto , Relevância Clínica , MicroRNAs/genética , Escleroderma Sistêmico/genéticaRESUMO
In situ Transmission Electron Microscopy (TEM) stands as an invaluable instrument for the real-time examination of the structural changes in materials. It features ultrahigh spatial resolution and powerful analytical capability, making it significantly versatile across diverse fields. Particularly in the realm of Lithium-Ion Batteries (LIBs), in situ TEM is extensively utilized for real-time analysis of phase transitions, degradation mechanisms, and the lithiation process during charging and discharging. This review aims to provide an overview of the latest advancements in in situ TEM applications for LIBs. Additionally, it compares the suitability and effectiveness of two techniques: the open cell technique and the liquid cell technique. The technical aspects of both the open cell and liquid cell techniques are introduced, followed by a comparison of their applications in cathodes, anodes, solid electrolyte interphase (SEI) formation, and lithium dendrite growth in LIBs. Lastly, the review concludes by stimulating discussions on possible future research trajectories that hold potential to expedite the progression of battery technology.
RESUMO
The development of sufficiently high-efficiency systems and effective catalysts for electrocatalytic hydrogen production is of great significance but challenging. Here, high-entropy alloy nanoclusters (HEANCs) with full-active sites and super-active sites are innovatively constructed for hydrazine oxidation-assisted electrolytic hydrogen production. The HEANCs show an average size of only seven atomic layers (1.48 nm). As the catalysts for both hydrogen evolution reaction (HER) and hydrazine oxidation reaction, the HEANC/C exhibits the best-level performance among reported electrocatalysts. Especially, the HEANC/C achieves an ultrahigh mass activity of 12.85 A mg-1 noble metals at -0.07 V and overpotential of only 9.5 mV for 10 mA cm-2 for alkaline HER. Further, with HEANC/C as both anode and cathode catalysts, an overall hydrazine oxidation-assisted splitting (OHzS) electrolyzer shows a record mass activity of 250.2 mA mg-1 catalysts at 0.1 V and only requires working voltages of 0.025 and 0.181 V to reach 10 and 100 mA cm-2, respectively, outperforming those of overall water-splitting system and other reported chemicals-assisted hydrogen production systems. Active site libraries including 72 sites on HEANC surface are originally constructed by theoretical calculations, revealing that all sites on HEANC surface are effective active sites for OHzS; especially some are super-active sites, endowing the best-level performance of HEANC/C.
RESUMO
Selected area electron diffraction (SAED) is a widely used technique for characterizing the structure and measuring lattice parameters of materials. An autonomous analytic method has become an urgent demand for the large-scale SAED data produced from in-situ experiments. In this work, we realize the automatic processing for center identification with a proposed deep segmentation model named the multi-scale Transformer (MS-Trans) network. This algorithm enables robust segmentation of the central spots by combining a novel gated axial-attention module and multi-scale feature fusion. The proposed MS-Trans model shows high precision and robustness, enabling autonomous processing of SAED patterns without any prior knowledge. The application on in-situ SAED data of the oxidation process of FeNi alloy demonstrates its capability of implementing autonomous quantitative processing. © 2017 Elsevier Inc. All rights reserved.
RESUMO
Dried blood spot (DBS) technology is a simple and convenient method for collecting, transporting, and storing blood samples on filter paper, and has numerous applications in the clinical, research, and public health settings. This technique is gaining popularity in the field of forensic science because it facilitates the rapid analysis of prohibited drugs in blood samples and offers significant advantages in toxicology scenarios such as drinking-driving screening, drug abuse detection, and doping detection. However, the lack of a standardized system and the fact that its stability and reliability have not been thoroughly researched and demonstrated limit its application in judicial practice in China. DBS samples can be prepared, stored, and analyzed in various ways, all of which may significantly affect the results. In this study, we developed a method based on ultra-high performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS) that focuses on the preparation, pretreatment, analysis, and storage of DBS samples. A thorough investigation was conducted to examine the optimal preparation conditions, including the blood spot matrix, drying technique, and preprocessing parameters, such as the solvent and extraction method. Moreover, the analytical conditions, such as the mobile phase system and elution gradient, were established to facilitate the quantitative detection of methamphetamine, lidocaine, ketamine, fentanyl, and diazepam in both DBS and whole-blood samples. The impact of storage conditions, such as the temperature, humidity, and sealing, on the analytical results of the DBS and whole-blood samples was also examined. The results showed a strong linear relationship for lidocaine and fentanyl within the range of 0.5-100 ng/mL. Similarly, methamphetamine, ketamine, and diazepam exhibited good linearity within the range of 2-100 ng/mL. The coefficients of determination (r2) ranged from 0.9983 to 0.9997, and the limits of detection ranged from 0.2 to 0.5 ng/mL, indicating a high degree of correlation and sensitivity. Stability tests demonstrated that the five target substances remained stable in the DBS for 60 days, with the measured contents deviating from the nominal values by 15%. Moreover, the measurement results of the DBS samples were highly similar to those of the whole-blood samples, with mean percentage differences of 4.44%, 3.50%, 7.66%, 5.10%, and 5.25% for fentanyl, diazepam, ketamine, lidocaine, and methamphetamine, respectively. Throughout the 60-day storage period, the maintenance of temperatures of -20 and 4 â, as well as sealing and dry storage, was not necessary. Room temperature was the most practical storage environment for the DBS samples. The results for each target showed very small concentration differences between the whole-blood and DBS samples, indicating that the DBS samples were suitable for drug and poison analysis in blood. Furthermore, the DBSs exhibited high quantitative consistency with the whole-blood samples, rendering them suitable matrices for preserving blood samples. Because DBS samples are easy to handle and store, they can realize the lightweight preservation of blood samples and provide a novel solution for the analysis and preservation of blood samples in public security practice. We recommend conducting comprehensive validations before utilizing DBS for analysis, particularly in terms of quantification, to ensure the judicial reliability of the results.
Assuntos
Ketamina , Metanfetamina , Venenos , Espectrometria de Massas em Tandem/métodos , Toxicologia Forense , Reprodutibilidade dos Testes , Teste em Amostras de Sangue Seco/métodos , Fentanila , Diazepam , LidocaínaRESUMO
In present study, bilayer emulsions with different interfacial structures stabilized by casein/butyrylated dextrin nanoparticles (CDNP), chitosan (CS) and chitosan nanoparticles (CSNP) were prepared to overcome the limitations of conventional emulsions. The effects of chitosan morphology and incorporation sequences on the bilayer emulsions were examined. Bilayer emulsions prepared with CDNP as the inner layer and CS/CSNP as the outer layer were observed to have smaller droplet sizes (1.39 ± 86.74 um and 1.45 ± 7.87 um). Bilayer emulsions prepared with CDNP as the inner layer and CS as the outer layer exhibited the lowest creaming index (2.38 %) after 14 days of storage, indicating excellent stability. Furthermore, bilayer emulsion prepared with CDNP as the inner layer and CS as the outer layer also exhibited a uniform water distribution, excellent protein oxidative stability, and uniformly distributed droplets by the measurement of Low-field NMR, intrinsic tryptophan fluorescence and laser confocal laser scanning microscopy. These results indicated that the study provided a theoretical basis for the development and design of bilayer emulsions with different interfacial structures. This study also provides a new material for the preparation of delivery systems that protect biologically active compounds. Bilayer emulsions are promising for applications in traditional and manufactured food products.
Assuntos
Caseínas , Quitosana , Dextrinas , Emulsões , Nanopartículas , Quitosana/química , Caseínas/química , Emulsões/química , Nanopartículas/química , Dextrinas/química , Tamanho da PartículaRESUMO
The industrial catalysts utilized for propane dehydrogenation (PDH) to propylene, an important alternative to petroleum-based cracking processes, either use expensive metals or metal oxides that are environmentally unbenign. We report that a typically less-active oxide, titanium oxide (TiO2), can be combined with earth-abundant metallic nickel (Ni) to form an unconventional Ni@TiOx catalyst for efficient PDH. The catalyst demonstrates a 94% propylene selectivity at 40% propane conversion and superior stability under industrially relevant conditions. Complete encapsulation of Ni nanoparticles was allowed at elevated temperatures (>550°C). A mechanistic study suggested that the defective TiOx overlayer consisting of tetracoordinated Ti sites with oxygen vacancies is catalytically active. Subsurface metallic Ni acts as an electronic promoter to accelerate carbon-hydrogen bond activation and hydrogen (H2) desorption on the TiOx overlayer.
RESUMO
Municipal solid waste incineration fly ash (MSWIFA) can be reused as a positive additive to strengthen soft soil. In this study, MSWIFA was initially used as a supplementary solidification material in combination with ordinary Portland cement to prepare fly ash cement-stabilized soil (FACS) with silty sand and silty clay, respectively. The ratio of MWSIFA to total mass was 5%, 10%, and 15%, and the cement content was set as 10% and 15%. The mechanical properties of FACS were evaluated by unconfined compressive strength test. The heavy metal-leaching test was conducted to estimate the environmental risk of FACS. The scanning electron microscope was used to test the micro-structure of FACS. The X-ray diffraction was performed to analyze material composition of FACS. The result indicates that the collaborative solidification of soft soil with MSWIFA and cement is feasible. Regarding the silty clay, the FA had positive effects on the silty clay in the service age (between 50 and 100% with 15% MSWIFA), as the MSWIFA reformulated the initial silty clay structure, resulting in interconnection and pore fill between particles. It can be founded that C-S-H and ettringite are the main products of MSWIFA and cement hydration, which are formed by the hydration of C3S and C2S. Regarding the silty sand, the MSWIFA decreased the peak strength (between 35 and 48% with 15% MSWIFA) but increased the ductility of the stabilized cement. Under the same mix proportions, the leaching toxicities of Zn and Pb in FACS of silty clay were obviously lower than were those of silty sand. Generally, the leaching concentrations of tested metals under all the mix proportions were well below the limit value set by GB 18598-2019 for hazardous waste landfill. Thus, the reuse of MSWIFA in cement-stabilized soil would be one of the effective methods in soft soil treatment and solid waste reduction.
Assuntos
Metais Pesados , Eliminação de Resíduos , Cinza de Carvão , Resíduos Sólidos/análise , Argila , Solo , Areia , Incineração , Metais Pesados/análise , Eliminação de Resíduos/métodos , Carbono/química , Material ParticuladoRESUMO
Excipient selection is crucial to address the oxidation and solubility challenges of bioactive substances, impacting their safety and efficacy. AKPL, a novel ω-3 polyunsaturated fatty acids (PUFAs) esterified phospholipid derived from Antarctic krill, demonstrates unique antioxidant capabilities and synergistic effects. It exhibits pronounced surface activity and electronegativity at physiological pH, as evidenced by a critical micelle concentration (CMC) of 0.15 g/L and ζ-potential of -49.9 mV. In aqueous environments, AKPL self-assembles into liposomal structures, offering high biocompatibility and promoting cell proliferation. Its polyunsaturated bond-rich structure provides additional oxidation sites, imparting antioxidant properties superior to other phospholipids like DSPC and DOPC. Additionally, AKPL augments the efficacy of lipophilic antioxidants, such as alpha-tocopherol and curcumin, in aqueous media through both intermolecular and intramolecular interactions. In sum, AKPL emerges as an innovative unsaturated phospholipid, offering new strategies for encapsulating and delivering oxygen-sensitive agents.
Assuntos
Antioxidantes , Euphausiacea , Fosfolipídeos , Euphausiacea/química , Animais , Fosfolipídeos/química , Antioxidantes/química , Antioxidantes/farmacologia , Coloides/química , Humanos , Materiais Biocompatíveis/química , Materiais Biocompatíveis/farmacologia , Regiões Antárticas , Ácidos Graxos Ômega-3/química , Ácidos Graxos Ômega-3/farmacologiaRESUMO
Combination products (CPs) combine two or more product types such as drugs, devices, and/or biological products for increased safety and clinical effectiveness. The emergence of innovative CPs poses new challenges for regulatory agencies in assigning jurisdiction for premarket review and oversight. In US, the 1990 Safe Medical Devices Act defines and provides classification criteria for CPs, and the US government has developed a regulatory process through multiple acts, including the 21st Century Cures Act of 2016. Meanwhile, regulators in the European Union (EU) and the Republic of Korea have recently recognized the importance of premarket pathways for CPs. The European Medicines Agency (EMA) has issued guidelines and explanations on compliance issues related to drug-device CPs under MDR. EMA doesn't have the definitions of CPs, but uses the term drug-device combination products (drug-device CPs). CPs are categorized as drugs or medical devices, which follow their relevant regulatory framework. The Ministry of Food and Drug Safety (MFDS) in Korea has legal definitions of CPs under the Notice of the MFDS. CPs are designated as drugs or medical devices according to their primary mode of actions (PMOA) and follow regulatory processes through the framework of drugs or medical devices. This study aims to comprehensively summarize the regulatory oversight of CPs by analyzing the regulatory policies and legal frameworks in the US, the EU, and Korea. The regulatory challenges encountered when developing CPs are also discussed. With specific emphasis on the combination of drugs and devices, this study provides in-depth insights into the regulatory landscape, shedding light on the unique challenges associated with the development of CPs for this particular intersection of drugs and devices.