Insights into the Mechanism of Nitrobenzene Reduction to Aniline by Phosphomolybdic Acid Supported TM1 Single-Atom Catalysts.

Catalytic hydrogenation of nitrobenzene (Ph-NO2) to aniline (Ph-NH2) is a model reaction in the field of catalysis, in which the development of efficient catalysts remains a great challenge due to the lack of strategies to solve activity and selectivity problems. In this work, the mechanism of Ph-NO2 hydrogenation over Pt1 supported on phosphomolybdic acid (α-PMA) was proposed by density functional theory (DFT) calculations. The results show that the dissociation of the first and second N-O bonds is triggered by single H-induced and double H-induced mechanisms, respectively. The limiting potential of the reaction process is -0.19 V, which is the smallest potential in the field of Ph-NO2 reduction reaction to date. In the whole reaction process, the catalytic active site is the Pt atom, and polyoxometalate plays the role of an electronic sponge in the reaction. Additionally, based on experimentally confirmed Pt1/Na3PMA, the reduction capacity of Pd1/Na3PMA toward Ph-NO2 was predicted by DFT calculation. The distinctive adsorption patterns of Ph-NO2 on Pt1/Na3PMA and Pd1/Na3PMA were elucidated using the DOS diagram and fragment molecular orbital analysis. We anticipate that our theoretical calculations can provide novel perspectives for experimental researchers.

Insight into the Mechanism of CO2 Chemical Fixation into Epoxides by Windmill-Shaped Polyoxovanadate and n-Bu4NX (X = Br, I).

Carbon dioxide (CO2) coupled with epoxide to generate cyclic carbonate stands out in carbon neutrality due to its 100% atom utilization. In this work, the mechanism of CO2 cycloaddition with propylene oxide (PO) cocatalyzed by windmill-shaped polyoxovanadate, [(C2N2H8)4(CH3O)4VIV4VV4O16]·4CH3OH (V8-1), and n-Bu4NX (X = Br, I) was thoroughly investigated using density functional theory (DFT) calculations. The ring-opening, CO2-insertion, and ring-closing steps of the process were extensively studied. Our work emphasizes the synergistic effect between V8-1 and n-Bu4NX (X = Br, I). Through the analysis of an independent gradient model based on Hirshfeld partition (IGMH), it was found that the attack of n-Bu4NX (X = Br, I) on Cß of PO triggers a distinct attractive interaction between the active fragment and the surrounding framework, serving as the primary driving force for the ring opening of PO. Furthermore, the effect of different cocatalysts was explored, with n-Bu4NI being more favorable than n-Bu4NBr. Moreover, the role of V8-1 in the CO2 cycloaddition reaction was clarified as not only acting as Lewis acid active sites but also serving as "electron sponges". This work is expected to advance the development of novel catalysts for organic carbonate formation.

Tuning optical properties of π-conjugated double nanohoops under external electric field stimuli-responsiveness.

Carbon nanorings have attracted substantial interest from synthetic chemists due to their unique topological structures and distinct physical properties. An intriguing π-conjugated double-nanoring structure, denoted as [8]CPP-[10]cyclacene, was constructed via the integration of [8]cycloparaphenylene ([8]CPP) into [10]cyclacene. Using the external electric field stimuli-responsiveness of [8]CPP-[10]cyclacene, directional charge transfer can be induced, resulting in the emergence of intriguing properties. The effects of the external electric field in three specific directions were explored, vertically in the [8]CPP unit (Fy), vertically in the [10]cyclacene unit (Fz), and horizontally along the double nanorings diameter (Fx). Interestingly, the external electric field vertically to the [10]cyclacene unit significantly enhanced the first hyperpolarizability (ßtot) compared to that vertically to the [8]CPP unit. Notably, [8]CPP-[10]cyclacene under Fx exhibited significantly larger the ßtot values (1.48 × 105 a.u.) than those of vertical Fy and Fz. This work opens up a wide range of nonlinear optics, making it a compelling area to explore in the field of carbon nanomaterials.

PGAM4 silencing inhibited glycolysis and chemoresistance to temozolomide in glioma cells.

Gliomas account for about 80% of malignant brain tumors. The incidence of a new brain tumor is 6.4 per 100,000 persons per year with an overall 5-year survival rate of 33.4%. Regardless of the great advances that have been made in recent years, the causes and pathogenesis of glioma remain unclear. Here we study how phosphoglycerate mutase 4 (PGAM4) contributes to glioma. Using a variety of methods to examine glioma cell viability, proliferation, apoptosis, glycolysis, as well as ChIP coanalysis with modified histone H3, we showed that PGAM4 was significantly upregulated in patients with glioma and associated with poor survival. Silencing PGAM4 attenuated cell viability, proliferation, and glycolysis in T98G cells and suppressed tumor growth in vivo, while overexpressing PGAM4 promoted cell viability, proliferation, and glycolysis in U251 cells via regulating glycolysis pathway. Study also revealed that PGAM4 was regulated by EP300-mediated modifications of H3K27ac. PGAM4 silencing inhibited cell viability and proliferation, suppressed tumor growth, and decreased chemoresistance to temozolomide in glioma cells through suppressing glycolysis.

Theoretical Insight on the High Reactivity of Reductive Elimination of NiIII Based on Energy- and Electron-Transfer Mechanisms.

Iridium/nickel (Ir/Ni) metallaphotoredox dual catalysis overcomes the challenging reductive elimination (RE) of Ni(II) species and has made a breakthrough progress to construct a wide range of C-X (X = C, N, S, and P) bonds. However, the corresponding reaction mechanisms are still ambiguous and controversial because the systematic research on the nature of this synergistic catalysis is not sufficient. Herein, IrIII/NiII and IrIII/Ni0 metallaphotoredox catalysis have been theoretically explored taking the aryl esterification reaction of benzoic acid and aryl bromide as an example by a combination of density functional theory (DFT), molecular dynamics, and time-dependent DFT computations. It is found that an electron-transfer mechanism is applicable to IrIII/NiII metallaphotoredox catalysis, but an energy-transfer mechanism is applicable to IrIII/Ni0 combination. The IrIII/NiII metallaphotoredox catalysis succeeds to construct a NiI-NiIII catalytic cycle to avoid the challenging RE of Ni(II) species, while the RE occurs from triplet excited-state Ni(II) species in the IrIII/Ni0 metallaphotoredox catalysis. In addition, the lower lowest unoccupied molecular orbital energy level of Ni(III) species than that of Ni(II) species accelerates RE from Ni(III) one. The triplet excited-state Ni(II) species can resemble a Ni(III) center, considering the metal-to-ligand charge transfer character to promote the RE.

Self-Consistent Quantum Mechanics/Embedded Charge Study on Aggregation-Enhanced Delayed Fluorescence of Cu(I) Complexes: Luminescence Mechanism and Molecular Design Strategy.

To elucidate the luminescence mechanism of highly efficient blue Cu(N^N)(POP)+-type thermally activated delayed fluorescence (TADF) materials, we have selected Cu(pytfmpz)(POP)+ (1) and Cu(pympz)(POP)+ (2) as targets to investigate the photophysical properties in both solution and solid phases. The self-consistent electrostatic potential (ESP) embedded charge within the quantum mechanics/molecular mechanics (QM/MM) method demonstrates a greater advantage over the charge equilibrium (QEQ) in accurately calculating atomic charges and reasonably describing the polarization effect, ultimately resulting in a favorable consistency between simulation and experimental measurements. After systematic and quantitative simulation, it has been found that complex 2, with an electron-donating group of -CH3, exhibits a much more blue-shifted spectrum and a significantly enhanced efficiency in comparison to complex 1 with -CF3. This is due to the widened HOMO-LUMO gap as well as the narrowed energy gap between the lowest singlet and triplet excited states (ΔEST), respectively. Then, the designed complex 3 is introduced with a stronger electron donor and larger tert-butyl group, which plays a key role in simultaneously suppressing the structural distortion and reducing the ΔEST. This leads to a faster reverse intersystem crossing process than that of the two experimental complexes in solution, turning out to be a new deep-blue-emitting material with excellent TADF performance.

Construction of Zr-Metal-Organic Frameworks-Based Composite Materials toward Anhydrous Proton Conduction and Photocatalytic CO2 Reduction.

Metal-organic frameworks constructed from Zr usually possess excellent chemical and physical stability. Therefore, they have become attractive platforms in various fields. In this work, two families of hybrid materials based on ZrSQU have been designed and synthesized, named Im@ZrSQU and Cu@ZrSQU, respectively. Im@ZrSQU was prepared through the impregnation method and employed for proton conduction. Im@ZrSQU exhibited terrific proton conduction performance in an anhydrous environment, with the highest proton conduction value of 3.6 × 10-2 S cm-1 at 110 °C. In addition, Cu@ZrSQU was synthesized via the photoinduction method for the photoreduction of CO2, which successfully promoted the conversion of CO2 into CO and achieved the CO generation rate of up to 12.4 µmol g-1 h-1. The photocatalytic performance of Cu@ZrSQU is derived from the synergistic effect of Cu NPs and ZrSQU. Based on an in-depth study and discussion toward ZrSQU, we provide a versatile platform with applications in the field of proton conduction and photocatalysis, which will guide researchers in their further studies.

Molecular Design of Highly Efficient Heavy-Atom-free NpImidazole Derivatives for Two-Photon Photodynamic Therapy and ClO- Detection.

Two-photon photodynamic therapy (TP-PDT), as a treatment technology with deep penetration and less damage, provides a broad prospect for cancer treatment. Nowadays, the development of TP-PDT suffers from the low two-photon absorption (TPA) intensity and short triplet state lifetime of photosensitizers (PSs) used in TP-PDT. Herein, we propose some novel modification strategies based on the thionated NpImidazole (the combination of naphthalimide and imidazole) derivatives to make efforts on those issues and obtain corresponding fluorescent probes for detecting ClO- and excellent PSs for TP-PDT. Density functional theory (DFT) and time-dependent DFT (TD-DFT) are used to help us characterize the photophysical properties and TP-PDT process of the newly designed compounds. Our results show that the introduction of different electron-donating groups at the position 4 of NpImidazole can effectively improve their TPA and emission properties. Specifically, 3s with a N,N-dimethylamino group has a large triplet state lifetime (τ = 699 µs) and TPA cross section value (δTPA = 314 GM), which can effectively achieve TP-PDT; additionally, 4s (with electron-donating group 2-oxa-6-azaspiro[3.3]heptane in NpImidazole) effectively realizes the dual-function of a PS for TP-PDT (τ = 25,122 µs, δTPA = 351 GM) and a fluorescent probe for detecting ClO- (Φf = 29% of the product 4o). Moreover, an important problem is clarified from a microscopic perspective, that is, why the transition property of 3s and 4s (1π-π*) from S1 to S0 is different from that of 1s and 2s (1n-π*). It is hoped that our work can provides valuable theoretical clues for the design and synthesis of heavy-atom-free NpImidazole-based PSs and fluorescent probes for the detection of hypochlorite.

Micro-Leakage Image Recognition Method for Internal Detection in Small, Buried Gas Pipelines.

In order to resolve the problem that the sample of image for internal detection of DN100 buried gas pipeline microleakage is single and difficult to identify, a recognition method of microleakage image of the pipeline internal detection robot is proposed. First, nongenerative data augmentation is used to expand the microleakage images of gas pipelines. Secondly, a generative data augmentation network, Deep Convolutional Wasserstein Generative Adversarial Networks (DCWGANs), is designed to generate microleakage images with different features for detection in the pipeline of gas pipelines to achieve sample diversity of microleakage images of gas pipelines. Then, a bi-directional feature pyramid network (BiFPN) is introduced into You Only Look Once (YOLOv5) to retain more deep feature information by adding cross-scale connecting lines in the feature fusion structure; finally, a small target detection layer is constructed in YOLOv5 so that more shallow feature information can be retained to achieve small-scale leak point recognition. The experimental results show that the precision of this method for microleak identification is 95.04%, the recall rate is 94.86%, the mAP value is 96.31%, and the minimum size of identifiable leaks is 1 mm.

Research on Channel Characteristics and Electrode Electrical Performance of Earth Current Field Information Transmission Technology.

Starting from the need for emergency rescue information transmission in tunnel engineering accidents, this article focuses on researching and solving the technical problems of information transmission between rescue personnel and trapped personnel after tunnel engineering collapse accidents, before and during the rescue process. The research objects are the information transmission channel and grounding electrode in the earth current field information transmission technology, and the electromagnetic characteristics of the earth medium and the electrical performance of the grounding electrode are studied and analyzed using the electromagnetic simulation software Maxwell based on finite element algorithm, establish a three-dimensional model based on the transmission of current field information of the ground electrode, analyze the effects of the electrode array, electrode depth, and radius on impedance. Research has shown that the impedance of the earth is related to the resistivity of the medium and is not a human-controllable factor. To reduce the contact impedance of an electric dipole antenna, one should start with the contact impedance of the earth electrode. The impedance of the transmitting end is an important factor affecting the efficiency of information transmission; parallel connection of multiple grounding electrodes, increasing the depth of grounding electrode penetration into the soil layer, and increasing the radius between grounding electrode pairs are all effective methods to reduce the contact impedance of electric dipole antennas, thereby improving information transmission capacity. To achieve wireless information transmission through the stratum, by appropriately selecting the operating frequency of electromagnetic waves, a certain distance of signal transmission can be achieved.

A Theoretical Study on the Underlying Factors of the Difference in Performance of Organic Solar Cells Based on ITIC and Its Isomers.

Recently, non-fullerene-based organic solar cells (OSCs) have made great breakthroughs, and small structural differences can have dramatic impacts on the power conversion efficiency (PCE). We take ITIC and its isomers as examples to study their effects on the performance of OSCs. ITIC and NFBDT only differed in the side chain position, and they were used as models with the same donor molecule, PBDB-T, to investigate the main reasons for the difference in their performance in terms of theoretical methods. In this work, a detailed comparative analysis of the electronic structure, absorption spectra, open circuit voltage and interfacial parameters of the ITIC and NFBDT systems was performed mainly by combining the density functional theory/time-dependent density functional theory and molecular dynamics simulations. The results showed that the lowest excited state of the ITIC molecule possessed a larger ∆q and more hybrid FE/CT states, and PBDB-T/ITIC had more charge separation paths as well as a larger kCS and smaller kCR. The reason for the performance difference between PBDB-T/ITIC and PBDB-T/NFBDT was elucidated, suggesting that ITIC is a superior acceptor based on a slight modulation of the side chain and providing a guiding direction for the design of superior-performing small molecule acceptor materials.

Development and global validation of a 1-week-old piglet head finite element model for impact simulations.

PURPOSE: Child head injury under impact scenarios (e.g. falls, vehicle crashes, etc.) is an important topic in the field of injury biomechanics. The head of piglet was commonly used as the surrogate to investigate the biomechanical response and mechanisms of pediatric head injuries because of the similar cellular structures and material properties. However, up to date, piglet head models with accurate geometry and material properties, which have been validated by impact experiments, are seldom. We aim to develop such a model for future research. METHODS: In this study, first, the detailed anatomical structures of the piglet head, including the skull, suture, brain, pia mater, dura mater, cerebrospinal fluid, scalp and soft tissue, were constructed based on CT scans. Then, a structured butterfly method was adopted to mesh the complex geometries of the piglet head to generate high-quality elements and each component was assigned corresponding constitutive material models. Finally, the guided drop tower tests were conducted and the force-time histories were ectracted to validate the piglet head finite element model. RESULTS: Simulations were conducted on the developed finite element model under impact conditions and the simulation results were compared with the experimental data from the guided drop tower tests and the published literature. The average peak force and duration of the guide drop tower test were similar to that of the simulation, with an error below 10%. The inaccuracy was below 20%. The average peak force and duration reported in the literature were comparable to those of the simulation, with the exception of the duration for an impact energy of 11 J. The results showed that the model was capable to capture the response of the pig head. CONCLUSION: This study can provide an effective tool for investigating child head injury mechanisms and protection strategies under impact loading conditions.

Dual Photosensitizer Coupled Three-Dimensional Metal-Covalent Organic Frameworks for Efficient Photocatalytic Reactions.

In this work, we innovatively assembled two types of traditional photosensitizers, that is pyridine ruthenium/ferrum (Ru(bpy)3 2+ /Fe(bpy)3 2+ ) and porphyrin/metalloporphyrin complex (2HPor/ZnPor) by covalent linkage to get a series of dual photosensitizer-based three-dimensional metal-covalent organic frameworks (3D MCOFs), which behaved strong visible light-absorbing ability, efficient electron transfer and suitable band gap for highly efficient photocatalytic hydrogen (H2 ) evolution. Rubpy-ZnPor COF achieved the highest H2 yield (30 338 µmol g-1 h-1 ) with apparent quantum efficiency (AQE) of 9.68 %@420 nm, which showed one of the best performances among all reported COF based photocatalysts. Furthermore, the in situ produced H2 was successfully tandem used in the alkyne hydrogenation with ≈99.9 % conversion efficiency. Theoretical calculations reveal that both the two photosensitizer units in MCOFs can be photoexcited and thus contribute optimal photocatalytic activity. This work develops a general strategy and shows the great potential of using multiple photosensitive materials in the field of photocatalysis.

Subsequent malaria enhances virus-specific T cell immunity in SIV-infected Chinese rhesus macaques.

BACKGROUND: Coinfection with HIV and Plasmodium parasites is fairly common, but the sequence of infection with these two pathogens and their impact on disease progression are poorly understood. METHODS: A Chinese rhesus macaque HIV and Plasmodium coinfection model was established to compare the impact of pre-existing and subsequent malaria on the progression of SIV infection. RESULTS: We found that a pre-existing malaria caused animals to produce a greater number of CD4+CCR5+ T cells for SIV replication, resulting in higher viral loads. Conversely, subsequent malaria induced a substantially larger proportion of CD4+CD28highCD95high central memory T cells and a stronger SIV-specific T cell response, maintained the repertoire diversity of SIV-specific T cell receptors, and generated new SIV-specific T cell clonotypes to trace SIV antigenic variation, resulting in improved survival of SIV-infected animals. CONCLUSION: The complex outcomes of this study may have important implications for research on human HIV and malaria coinfection. The infection order of the two pathogens (HIV and malaria parasites) should be emphasized. Video abstract.

Theoretical Insight into the Multiple Roles of LiHMDS in Pd-Catalyzed Borylation of Fluorobenzene.

Pd-catalyzed borylation of fluorobenzene was theoretically studied. DFT calculations revealed that the reaction occurs through an unprecedented 3 + 6-membered ring transition state, in which one LiHMDS (HMDS = hexamethyldisilazane) acts as a ligand and another LiHMDS is essential to provide Li···N and Li···F interactions, overcoming the large destabilization of the strong phenyl-F bond distortion. The characteristic feature of LiHMDS was elucidated by comparing it with HMDS and NaHMDS analogues.

IrIII/NiII-Metallaphotoredox-Catalyzed Enantioselective Decarboxylative Arylation of α-Amino Acids: Theoretical Insight of Enantio-Determining Outer-Sphere Reductive Elimination.

The IrIII/NiII-metallaphotoredox-catalyzed enantioselective decarboxylative arylation of α-amino acids has been systematically investigated using density functional theory calculations. The combination of oxidative quenching (IrIII-*IrIII-IrIV-IrIII) or reductive quenching (IrIII-*IrIII-IrII-IrIII) cycle with the nickel catalytic cycle (NiII-NiI-NiIII-NiII) is possible. The favorable reaction mechanism consists of three major processes: single-electron transfer, oxidative addition, and stepwise outer-sphere reductive elimination. The rate-determining step is the oxidative addition. Unexpectedly, the enantio-determining C-C bond formation occurs via an ion-pair intermediate involved in the stepwise outer-sphere reductive elimination process, which is unusual in the IrIII/NiII-metallaphotoredox catalysis. Furthermore, computational results reveal that the high enantioselectivity of this reaction is mainly dependent on the steric effect of substituents on substrates. This theoretical study provides useful knowledge for deep insights into the activity and selectivity of visible-light-mediated enantioselective metallaphotoredox dual catalysis at the molecular and atomic levels and benefits the development of asymmetric synthesis.

Mixed-Linker Strategy for the Construction of Metal-Organic Framework Combined with Dyes toward Alcohol Detection.

Herein, a N-rich metal-organic framework (MOF) with four kinds of cages, Zn4(ade)2(TCA)2(H2O) (NENU-1000, Hade = adenine, H3TCA = 4,4',4″-tricarboxytriphenylamine, NENU = Northeast Normal University), was prepared by the mixed-ligand strategy. Cationic dyes can be selectively absorbed by NENU-1000 at proper concentrations, but not neutral and anionic dyes, which perhaps can be assigned to the N-rich neutral framework of NENU-1000. When NENU-1000 was introduced to a relatively lower concentration of cationic dye solutions (e.g., rhodamine B or basic red 2), the colors of these systems faded quickly. Furthermore, the faded solutions can be used for the detection of methanol and other small alcohol molecules with either the naked eye or common UV-vis spectra. The effect of the length of carbon chain, the position of the -OH group, and the number of the hydroxyl group of the alcohols was explored for the color development rate. In addition, the performance of NENU-1000 in iodine sorption and release was also studied.

Ag Nanoparticle-Modified Polyoxometalate-Based Metal-Organic Framework for Enhanced CO2 Photoreduction.

The photoreduction deposition method is employed to fabricate a family of silver nanoparticle (Ag NP)-modified polyoxometalate-based metal-organic framework (NENU-5) photocatalysts, named Ag/NENU-5. The title photocatalysts, Ag/NENU-5, can be used for the photocatalytic reduction of CO2 and are observed to efficiently reduce CO2 into CO, in which the highest reduction rate is 22.28 µmol g-1 h-1, 3 times greater than that of NENU-5. Photocatalytic reduction performances of CO2 have been extremely improved after the incorporation of Ag NPs as the cocatalyst. The enhancement of the photocatalytic reduction of CO2 has been attributed to the synergistic effects of Ag NPs and NENU-5, inhibiting the charge recombination during the photocatalytic process and increasing the reaction active sites. Furthermore, the influence of Ag NPs on the photocatalytic activity has also been investigated. The experimental results clearly reveal that the size of Ag NPs could exert a main effect on the photocatalytic activity, and the reasonable size of Ag NPs is able to enhance the photocatalytic reduction activity toward CO2 significantly.

Rational Design of Ir(III) Phosphors to Strategically Manage Charge Recombination for High-Performance White Organic Light-Emitting Diodes.

Constructing high-quality white organic light-emitting diodes (WOLEDs) remains a big challenge because of high demands on the electroluminescence (EL) performance including high efficiency, excellent spectral stability, and low roll-off simultaneously. To achieve effective energy transfer and trap-assisted recombination in the emissive layer, herein, four Ir(III) phosphors, namely, mOMe-Ir-PI (1), pOMe-Ir-PI (2), mOMe-Ir-PB (3), and pOMe-Ir-PB (4), were strategically designed via simple regulation of the substituent moiety and π conjugation of the chelated ligands. Their photophysical and EL properties were systematically investigated. When these phosphors are employed as doped emitters, the monochromic green organic light-emitting diodes not only exhibit a superior performance with the characteristics of 50.2 cd A-1, 39.2 lm W-1, and 15.1%, but also maintain a negligible roll-off ratio of 0.2% at 1000 cd m-2, which are better than those of commercial green Ir(ppy)2acac and Ir(ppy)3 in the same device configuration. Inspired by these outstanding performances, we successfully fabricated the warm WOLED utilizing 2 as a green component, affording a peak efficiency of 42.0 cd A-1, 29.3 lm W-1, and 18.6% and retaining at 39.9 cd A-1, 23.7 lm W-1, and 17.4% even at 1000 cd m-2. The results herein demonstrate the superiority of the molecular design and propose a simple method toward the development of promising Ir(III) phosphors for high-efficiency WOLEDs.

Novel Ir(III) Complexes with NHC-Based Ancillary Ligands for Efficient Nondoped OLEDs.

Nondoped organic light-emitting diodes (OLEDs) are of paramount importance for display and lighting applications owing to their advantages of facile fabrication and outstanding stability. However, nondoped OLEDs achieving extraordinary electroluminescence (EL) performance and low turn-on voltage (Von) remain sparse. Here, three Ir(III) complexes featuring N-heterocyclic carbene (NHC) auxiliary ligands functionalized with electron-deficient aromatic sulfonyl or phosphine oxide groups are reported as promising emitters for nondoped OLEDs. All Ir(III) complexes exhibit green emission with relatively high neat film efficiency. Although the photoluminescence spectra of three complexes reveal similarities, there are distinct differences in the nondoped EL performance. The nondoped device N3 based on tBu-Ir-ISO displays the most eminent EL performances and presents a low Von of 2.1 V, a power efficiency of 30.7 lm W-1, and a maximum current efficiency of 27.0 cd A-1, which can be attributed to steric hindrance and balanced carrier-transporting ability induced by electron-deficient substituents. Moreover, doped devices D1-D3 also realize excellent EL performance. It is believed that the strategy reported herein is a simple and efficient way of constructing excellent Ir(III) complexes for nondoped phosphorescent OLEDs.