Terahertz optical fibers [Invited].

Lying between optical and microwave ranges, the terahertz band in the electromagnetic spectrum is attracting increased attention. Optical fibers are essential for developing the full potential of complex terahertz systems. In this manuscript, we review the optimal materials, the guiding mechanisms, the fabrication methodologies, the characterization methods and the applications of such terahertz waveguides. We examine various optical fiber types including tube fibers, solid core fiber, hollow-core photonic bandgap, anti-resonant fibers, porous-core fibers, metamaterial-based fibers, and their guiding mechanisms. The optimal materials for terahertz applications are discussed. The past and present trends of fabrication methods, including drilling, stacking, extrusion and 3D printing, are elaborated. Fiber characterization methods including different optics for terahertz time-domain spectroscopy (THz-TDS) setups are reviewed and application areas including short-distance data transmission, imaging, sensing, and spectroscopy are discussed.

Negative curvature hollow-core anti-resonant fiber for terahertz sensing.

Hollow-core fibers are advantageous for chemical sensing as they facilitate liquid infiltration into the core over conventional porous core fiber. In addition, the requirement of less bulk material significantly decreases the effective material loss (EML). In this paper, a six circular cladding tube negative curvature hollow-core fiber (NC-HCF) is proposed for chemical sensing. Five different chemicals including chloroform, polylactic acid, CCL3, glycerin, and benzene are proposed to fill the core of the NC-HCF, and sensitivities are evaluated by full vector finite element method-based COMSOL software. Numerical results reveal that the proposed sensor exhibits very high relative sensitivity in a wide range of frequency. The fabrication of the proposed fiber is feasible by existing fabrication facilities as it contains realistic fabrication parameters. Hence, the proposed sensor can potentially be used as a chemical sensor especially in the medical, food, and industrial sectors as the five chemicals mentioned above carry great medical and food significance.

Localized surface plasmon resonance biosensor: an improved technique for SERS response intensification.

As technology continues to advance, the development of novel sensing systems opens new possibilities for low-cost, practical biosensing applications. In this Letter, we demonstrate a localized surface plasmon resonance system that combines both wave-guiding and plasmonic resonance sensing with a single microstructured polymeric structure. Characterizing the sensor using the finite element method simulation shows, to the best of our knowledge, a record wavelength sensitivity (WS) of 111000 nm/refractive index unit (RIU), high amplitude sensitivity (AS) of 2050 RIU-1, high sensor resolution and limit of detection of 9×10-7 RIU and 8.12×10-12 RIU2/nm, respectively. Furthermore, these sensors have the capability to detect an analyte within the refractive index range of 1.33-1.43 in the visible to mid-IR, therefore being potentially suitable for applications in biomolecular and chemical analyte detection.

Dual-polarized highly sensitive plasmonic sensor in the visible to near-IR spectrum.

We propose and numerically characterize the optical characteristics of a novel photonic crystal fiber (PCF) based surface plasmon resonance (SPR) sensor in the visible to near infrared (500-2000 nm) region for refractive index (RI) sensing. The finite element method (FEM) is used to design and study the influence of different geometric parameters on the sensing performance of the sensor. The chemically stable plasmonic material gold (Au) is used to produce excitation between the core and plasmonic mode. On a pure silica (SiO2) substrate, a rectangular structured core is used to facilitate the coupling strength between the core and the surface plasmon polariton (SPP) mode and thus improves the sensing performance. By tuning the geometric parameters, simulation results show a maximum wavelength sensitivity of 58000 nm/RIU (Refractive Index Unit) for the x polarization and 62000 nm/RIU for the y polarization for analyte refractive indices ranging from 1.33 to 1.43. Moreover, we characterize the amplitude sensitivity of the sensor that shows a maximum sensitivity of 1415 RIU-1 and 1293 RIU-1 for the x and y polarizations, respectively. To our knowledge, this is the highest sensitivity for an SPR in published literature, and facilitates future development of sensors for accurate and precise analyte measurement. The sensor also attains a maximum figure of merit (FOM) of 1140 and fine RI resolution of 1.6 × 10-6. Owing to strong coupling strength, high sensitivity, high FOM and improved sensing resolution, the proposed sensor is suited for real-time, inexpensive and accurate detection of biomedical and biological analytes, biomolecules, and organic chemicals.

Terahertz detection of alcohol using a photonic crystal fiber sensor.

Ethanol is widely used in chemical industrial processes as well as in the food and beverage industry. Therefore, methods of detecting alcohol must be accurate, precise, and reliable. In this content, a novel Zeonex-based photonic crystal fiber (PCF) has been modeled and analyzed for ethanol detection in terahertz frequency range. A finite-element-method-based simulation of the PCF sensor shows a high relative sensitivity of 68.87% with negligible confinement loss of 7.79×10-12 cm-1 at 1 THz frequency and x-polarization mode. Moreover, the core power fraction, birefringence, effective material loss, dispersion, and numerical aperture are also determined in the terahertz frequency range. Owing to the simple fiber structure, existing fabrication methods are feasible. With the outstanding waveguiding properties, the proposed sensor can potentially be used in ethanol detection, as well as polarization-preserving applications of terahertz waves.

Zeonex-based asymmetrical terahertz photonic crystal fiber for multichannel communication and polarization maintaining applications.

We report on the design, in-depth analysis, and characterization of a novel elliptical array shaped core rectangular shaped cladded photonic crystal fiber (PCF) for multichannel communication and polarization maintaining applications of terahertz waves. The asymmetrical structure of air holes in both core and cladding results in increased birefringence, while a compact geometry and different cladding air hole size makes the dispersion characteristic flat. The modal characteristics of the PCF are calculated using a finite element method. The simulated results show a near-zero dispersion flattened property of ±0.02 ps/THz/cm, high birefringence of 0.063, low effective material loss of 0.06 cm-1, and negligible confinement loss of 5.45×10-13 cm-1 in the terahertz frequency range. Additionally, the core power fraction, effective area, physical attributes, and potential fabrication possibilities of the fiber are discussed.

Ultra low-loss hybrid core porous fiber for broadband applications.

In this paper, we present the design and analysis of a novel hybrid porous core octagonal lattice photonic crystal fiber for terahertz (THz) wave guidance. The numerical analysis is performed using a full-vector finite element method (FEM) that shows that 80% of bulk absorption material loss of cyclic olefin copolymer (COC), commercially known as TOPAS can be reduced at a core diameter of 350 µm. The obtained effective material loss (EML) is as low as 0.04 cm-1 at an operating frequency of 1 THz with a core porosity of 81%. Moreover, the proposed photonic crystal fiber also exhibits comparatively higher core power fraction, lower confinement loss, higher effective mode area, and an ultra-flattened dispersion profile with single mode propagation. This fiber can be readily fabricated using capillary stacking and sol-gel techniques, and it can be used for broadband terahertz applications.