Widespread fungal-bacterial competition for magnesium lowers bacterial susceptibility to polymyxin antibiotics.

Fungi and bacteria coexist in many polymicrobial communities, yet the molecular basis of their interactions remains poorly understood. Here, we show that the fungus Candida albicans sequesters essential magnesium ions from the bacterium Pseudomonas aeruginosa. To counteract fungal Mg2+ sequestration, P. aeruginosa expresses the Mg2+ transporter MgtA when Mg2+ levels are low. Thus, loss of MgtA specifically impairs P. aeruginosa in co-culture with C. albicans, but fitness can be restored by supplementing Mg2+. Using a panel of fungi and bacteria, we show that Mg2+ sequestration is a general mechanism of fungal antagonism against gram-negative bacteria. Mg2+ limitation enhances bacterial resistance to polymyxin antibiotics like colistin, which target gram-negative bacterial membranes. Indeed, experimental evolution reveals that P. aeruginosa evolves C. albicans-dependent colistin resistance via non-canonical means; antifungal treatment renders resistant bacteria colistin-sensitive. Our work suggests that fungal-bacterial competition could profoundly impact polymicrobial infection treatment with antibiotics of last resort.

Genome-wide identification and analysis of the GGCT gene family in wheat.

BACKGROUND: γ-glutamylcyclotransferase (GGCT), an enzyme to maintain glutathione homeostasis, plays a vital role in the response to plant growth and development as well as the adaptation to various stresses. Although the GGCT gene family analysis has been conducted in Arabidopsis and rice, the family genes have not yet been well identified and analyzed at the genome-wide level in wheat (Triticum aestivum L.). RESULTS: In the present study, 20 TaGGCT genes were identified in the wheat genome and widely distributed on chromosomes 2A, 2B, 2D, 3A, 4A, 5A, 5B, 5D, 6A, 6B, 6D, 7A, 7B, and 7D. Phylogenetic and structural analyses showed that these TaGGCT genes could be classified into three subfamilies: ChaC, GGGACT, and GGCT-PS. They exhibited similar motif compositions and distribution patterns in the same subgroup. Gene duplication analysis suggested that the expansion of TaGGCT family genes was facilitated by segmental duplications and tandem repeats in the wheat evolutionary events. Identification of diverse cis-acting response elements in TaGGCT promoters indicated their potential fundamental roles in response to plant development and abiotic stresses. The analysis of transcriptome data combined with RT-qPCR results revealed that the TaGGCTs genes exhibited ubiquitous expression across plant organs, with highly expressed in roots, stems, and developing grains. Most TaGGCT genes were up-regulated after 6 h under 20% PEG6000 and ABA treatments. Association analysis revealed that two haplotypes of TaGGCT20 gene displayed significantly different Thousand-kernel weight (TKW), Kernel length (KL), and Kernel width (KW) in wheat. The geographical and annual distribution of the two haplotypes of TaGGCT20 gene further revealed that the frequency of the favorable haplotype TaGGCT20-Hap-I was positively selected in the historical breeding process of wheat. CONCLUSION: This study investigated the genome-wide identification, structure, evolution, and expression analysis of TaGGCT genes in wheat. The motifs of TaGGCTs were highly conserved throughout the evolutionary history of wheat. Most TaGGCT genes were highly expressed in roots, stems, and developing grains, and involved in the response to drought stresses. Two haplotypes were developed in the TaGGCT20 gene, where TaGGCT20-Hap-I, as a favorable haplotype, was significantly associated with higher TKW, KL, and KW in wheat, suggesting that the haplotype is used as a function marker for the selection in grain yield in wheat breeding.

Sugars and sucrose transporters in pollinia of Phalaenopsis aphrodite (Orchidaceae).

The pollen grains of Phalaenopsis orchids are clumped tightly together, packed in pollen dispersal units called pollinia. In this study, the morphology, cytology, biochemistry, and sucrose transporters in pollinia of Phalaenopsis orchids were investigated. Histochemical detection was used to characterize the distribution of sugars and callose at the different development stages of pollinia. Ultra-performance liquid chromatography-high resolution-tandem mass spectrometry data indicated that P. aphrodite accumulated abundant saccharides such as sucrose, galactinol, myo-inositol, and glucose, and trace amounts of raffinose and trehalose in mature pollinia. We found that galactinol synthase (PAXXG304680) and trehalose-6-phosphate phosphatase (PAXXG016120) genes were preferentially expressed in mature pollinia. The P. aphrodite genome was identified as having 11 sucrose transporters (SUTs). Our qRT-PCR confirmed that two SUTs (PAXXG030250 and PAXXG195390) were preferentially expressed in the pollinia. Pollinia germinated in pollen germination media (PGM) supplemented with 10% sucrose showed increased callose production and enhanced pollinia germination, but there was no callose or germination in PGM without sucrose. We show that P. aphrodite accumulates high levels of sugars in mature pollinia, providing nutrients and enhanced SUT gene expression for pollinia germination and tube growth.

[Hemoglobin C Variant Affecting Glycated Hemoglobin Test Results: A Rare Case Report].

Hemoglobin (Hb) variants are common factors that affect the results of glycosylated hemoglobin (A1C) tests. Hemoglobin variants react differently to different testing methods. Herein, we presented the first ever report of the effect of hemoglobin C (Hb C) on the test results of A1C in the Chinese population. High performance liquid chromatography (HPLC) and capillary electrophoresis were performed to measure A1C. Hemoglobin electrophoresis was conducted to identify the hemoglobin variants. Hb sequencing was performed to determine the mutation sites on the ß chain. HPLC showed decreased A1C results, which could be corrected by electrophoresis, but the electrophoresis graph still showed abnormal peaks. The hemoglobin electrophoresis results suggested that there were hemoglobin variants, which hemoglobin sequencing results revealed to be Hb C. Uncommon variations in a specific population tend to be overlooked. To avoid clinical decision-making being affected by the results of a single test, we recommend that an explanatory reporting model be routinely adopted for A1C tests so that all reports always contain explanatory notes for the testing methodology and analysis of the graphs.

Prognostic significance of frailty in older patients with hip fracture: a systematic review and meta-analysis.

PURPOSE: Hip fracture (HF) has become a major healthcare concern associated with higher mortality in older patients. Frailty is one of the most important problems in aging population but its prognostic value in HF remains susceptible. This systematic review and meta-analysis aimed to evaluate the association between frailty and adverse outcomes in older patients with HF. METHODS: We systematically searched electrical databases including PubMed and Embase to find eligible literature with end-search restriction of February 20, 2021. The main endpoints were all-cause mortality, peri-operative complications, abnormal discharge, and length of stay (LOS). Pooled effect size was calculated by random-effects or fixed-effect model according to study heterogeneity. Three subgroup analyses based on follow-up times, study design, and frailty criteria were conducted. RESULTS: We screened 22 studies out of 1599 identified studies in our analysis. Compared with normal patients, frail ones had a higher risk of mortality both before (OR = 3.48, 95% CI: 2.50-4.85, I2 = 87.2%, P < 0.001) and after (OR = 1.87, 95% CI: 1.44-2.44, I2 = 85.5%, P < 0.001) adjustment. The incidence of peri-operative complications, abnormal discharge, and prolonged LOS also significantly increased in frail subjects. There was no publication bias observed and the pooled results were stable based on sensitivity analysis. CONCLUSION: Overall, more attention needs to be paid to the prognostic effects caused by frailty in seniors with HF. Better understanding of the association between frailty and adverse outcomes in HF could help doctors perform co-management across orthopaedic and geriatric departments.

Structural insights into the interaction between phytoplasmal effector causing phyllody 1 and MADS transcription factors.

Phytoplasmas are bacterial plant pathogens which can induce severe symptoms including dwarfism, phyllody and virescence in an infected plant. Because phytoplasmas infect many important crops such as peanut and papaya they have caused serious agricultural losses. The phytoplasmal effector causing phyllody 1 (PHYL1) is an important phytoplasmal pathogenic factor which affects the biological function of MADS transcription factors by interacting with their K (keratin-like) domain, thus resulting in abnormal plant developments such as phyllody. Until now, lack of information on the structure of PHYL1 has prevented a detailed understanding of the binding mechanism between PHYL1 and the MADS transcription factors. Here, we present the crystal structure of PHYL1 from peanut witches'-broom phytoplasma (PHYL1PnWB ). This protein was found to fold into a unique α-helical hairpin with exposed hydrophobic residues on its surface that may play an important role in its biological function. Using proteomics approaches, we propose a binding mode of PHYL1PnWB with the K domain of the MADS transcription factor SEPALLATA3 (SEP3_K) and identify the residues of PHYL1PnWB that are important for this interaction. Furthermore, using surface plasmon resonance we measure the binding strength of PHYL1PnWB proteins to SEP3_K. Lastly, based on confocal images, we found that α-helix 2 of PHYL1PnWB plays an important role in PHYL1-mediated degradation of SEP3. Taken together, these results provide a structural understanding of the specific binding mechanism between PHYL1PnWB and SEP3_K.

Application of Maillard reaction product of xylose-pea protein enzymatic hydrolysate in 3D printing.

BACKGROUND: This paper aims to provide a basis for the application of Maillard reaction products and ideas for 3D printing of functional food. RESULTS: We evaluated the effects of pea protein enzymatic hydrolysate-xylose Maillard reaction products (xMRPs) on the printability of 3D printing materials and the structure using various techniques. It was found that compared with the addition of enzymatic hydrolysate, the materials with xMRPs and 3D printing could significantly improve the structure, physical properties, formability of 3D printing materials and 3D print products, among which the xMRPs with 6 g of xylose had the most significant effect. CONCLUSIONS: This study has important scientific value and practical significance for the high-valued application of Millard reaction products and the promotion of the practical application of 3D printing technology in the food industry. © 2020 Society of Chemical Industry.

Bifunctional immunoaffinity magnetic nanoparticles for high-efficiency separation of exosomes based on host-guest interaction.

The investigation of exosomes holds substantial importance in the field of disease diagnosis and prognosis, where in the rapid and low-loss isolation of exosomes emerges as a crucial step owing to their exceedingly low concentration in bodily fluids. Herein, bifunctional immunoaffinity magnetic nanoparticles (BI-NPs) were successfully constructed by binding Ti4+ and antibody to magnetic nanoparticles through host-guest interaction. Exosomes in the cell culture supernatant could be effectively captured by the BI-NPs and then gently eluted with α-CD and 10% ammonia solution. Following the elution process, the content of captured exosome protein was determined to be up to 97 µg/mL. A total of 2822 protein groups were identified in the exosomes isolated by BI-NPs, 1060 protein groups were derived from exosomes. At the same time, the mass of exosome protein obtained by BI-NPs was more than 2 times that of UC isolation, and the above results indicated that BI-NPs had high purity enrichment performance. This is attributed to the fact that BI-NPs combine the dual affinity of Ti4+ and antibody to achieve efficient enrichment of exosomes, in addition to the mild elution property of BI-NPs due to the presence of the host-guest system. BI-NPs offer a novel approach for the isolation of exosomes, in order to further promote the application of exosomes in the required fields.

Interfacial Bonding and Fracture Behaviors of AZ63 Magnesium Alloy Sheet Processed by Accumulative Roll Bonding.

In order to understand the strengthening and the failure mechanism of accumulative roll bonding (ARB)-processed AZ63 Mg alloy, the interfacial bonding and fracture behavior of an ARB-processed AZ63 sheet were studied through electron microscopic analysis. The correlation between the mechanical properties, the microstructure, and the ARB processing parameters of an AZ63 sheet were presented. The experimental results have demonstrated that the average grain size of AZ63 Mg alloy processed by ARB was remarkably refined from 12.8 µm to 5.7 µm when the ARB processing temperature was set to 623 K, indicating the occurrence and development of dynamic recrystallization (DRX) nucleation. With the increase in ARB passes, the microstructure obviously became uniform. However, after five passes of the ARB process at 623 K, grains with different crystallographic orientations at the interface can be rearranged to generate the coherent eutectic plane, which inhibits the further refinement of grain size. During the ARB process of the AZ63 Mg alloy, the grain refinement was controlled by twin-induced recrystallization and dynamic recrystallization. Microcracks at the bonded interface of the ARB1 sample were eliminated during the following 3~5 rolling passes at 623 K. After three passes of the ARB process at 623 K, the strength and elongation of the AZ63 Mg alloy increased from 232 MPa and 18.5% to 282 MPa and 26.3%, respectively. The tensile fracture morphology of the sample processed by three passes of ARB exhibited numerous dimples, and the slip lines caused by the cooperative deformation of refined grains can produce a network-like dimple structure, indicating that excellent ductile fracture characteristics could be obtained.

Antibacterial Activity of Epigallocatechin Gallate (EGCG) against Shigella flexneri.

Shigella flexneri (S. flexneri), a major intestinal pathogen, is a global public health concern. The biofilms formed by S. flexneri threaten environmental safety, since they could promote the danger of environmental contamination and strengthen the disease-causing properties of bacteria. Epigallocatechin gallate (EGCG) is an important catechin in tea, which has a high antibacterial activity. However, its antibacterial mechanism is still unclear. This research aims to quantify the antibacterial function and investigate the possible mechanism of EGCG inhibition of S. flexneri. The minimum inhibitory concentration (MIC) of EGCG against planktonic S. flexneri in the investigation was measured to be 400 µg/mL. Besides, SDS-PAGE and field emission scanning electron microscopy showed that EGCG interfered with protein synthesis and changed bacteria morphology. Through controlling the expression of the mdoH gene, EGCG was found to be able to prevent an S. flexneri biofilm extracellular polysaccharide from forming, according to experiments utilizing the real-time PCR test. Additional research revealed that EGCG might stimulate the response of S. flexneri to oxidative stress and prevent bacterial growth. These findings suggest that EGCG, a natural compound, may play a substantial role in S. flexneri growth inhibition.

Fabrication of Cu/Al/Cu Laminated Composites Reinforced with Graphene by Hot Pressing and Evaluation of Their Electrical Conductivity.

Metal laminated composites are widely used in industrial and commercial applications due to their excellent overall performance. In this study, the copper/graphene-aluminum-copper/graphene (Cu/Gr-Al-Cu/Gr) laminated composites were prepared by ingenious hot pressing design. Raman, optical microscope (OM), scanning electron microscope (SEM), van der Pauw (vdP), and X-Ray Diffractometer (XRD) were used to investigate the graphene status, interface bonding, diffusion layer thickness, electrical conductivity, Miller indices and secondary phases, respectively. The results demonstrate that the Cu-Al interfaces in the Cu/Gr-Al-Cu/Gr composites were free of pores, cracks and other defects and bonded well. The number of graphene layers was varied by regulating the thickness of the Cu/Gr layer, with the Cu/Gr foils fabricated by chemical vapor deposition (CVD). The electrical conductivity of the composite was significantly improved by the induced high-quality interfaces Cu/Gr structure. The increased number of graphene layers is beneficial for enhancing the electrical conductivity of the Cu/Gr-Al-Cu/Gr composite, and the highest conductivity improved by 20.5% compared to that of raw Al.

Chinese language teachers' dichotomous identities when teaching ingroup and outgroup students.

Research into second language teacher identity has experienced a shift in recent years from a cognitive perspective to social constructionist orientation. The existing research in Chinese language literature in relation to Foreign Language (CFL) teachers' identity shift is principally in relation to the change of social, cultural, and institutional contexts. Built on the current literature, this research asks: "How might teachers' self-images or self-conceptualizations be renegotiated when they are located within their own mainstream cultural and educational system, yet comprised of students from various cultural backgrounds?" The data were collected from a group of CFL teachers in a South China university. The research found that students' backgrounds largely impacted on, and led to, the teachers' dichotomous relational identities, but did not dramatically change the teachers' perception on what or how much subject knowledge to be possessed to make an ideal CFL teacher. This attribute of their identity was sustained even though the teaching content was modified at a practical level in response to groups' differences. Further, the CFL teachers' pedagogical identity remained stable with only minor modifications when teaching "ingroups" and "outgroups" of students.

Theoretical and experimental research on valve-less piezoelectric pump with arc-shaped tubes.

In order to apply a valve-less piezoelectric pump in navigation equipment, this work first revealed a valve-less piezoelectric pump with arc-shaped tubes and then researched the relationship between the main structural parameters of arc-shaped tubes and the output flow rate. According to the velocity difference between clockwise and counterclockwise directions of liquid in circular arc-shaped tubes, the flow characteristics of liquid in circular arc-shaped tubes are analyzed in this paper, and the velocity difference model and flow equation of a piezoelectric pump are established. By using three-dimensional printing technology, five types of prototypes with different parameters were made, and the experimental research was carried out. The results show that at the optimal frequency, the pump output flow is the largest. The output flow is proportional to the driving voltage, the base circle radius, and the cross section area of the pipe. The low-cost and miniaturized navigation equipment made by using the piezoelectric pump has potential application value in unmanned aerial vehicle and intelligent vehicle navigation.

Working Mechanisms and Experimental Research of Piezoelectric Pump with a Cardiac Valve-like Structure.

In this study, based on the working principle of the cardiac valve structure that prevents blood from flowing back, a piezoelectric pump with a cardiac valve-like structure (PPCVLS) is designed. The operating principles of cardiac-valve-like structures (CVLSs) are introduced. Furthermore, the closure conditions of the CVLSs on both sides of the flow channel are explored. The principle behind the working-state conversion between "valve-based" and "valve-less" of PPCVLS is also analyzed. A high-speed dynamic microscopic image-analysis system was utilized to observe and verify the working-state conversion between "valve-based" and "valve-less" PPCVLSs. The resonant frequency of the piezoelectric pump was measured by Doppler laser vibrometer, and the optimal working frequency of the piezoelectric vibrator was determined as 22.35 Hz. The prototype piezoelectric pump was fabricated by the 3D printing technique, and the output performance of the piezoelectric pump was also evaluated. The experimental results show that the piezoelectric pump is valve-based when the driving voltage is greater than 140V, and the piezoelectric pump is valve-less when the driving voltage is less than 140 V. Furthermore, the maximum output pressure of the piezoelectric pump was 199 mm H2O when driven by the applied voltage of 220 V at 7 Hz, while the maximum flow rate of the piezoelectric pump was 44.5 mL/min when driven by the applied voltage of 220 V at 11 Hz.

Inhibition of persimmon tannin extract on guinea pig skin pigmentation.

BACKGROUND: In daily life, excessive exposure to ultraviolet light can lead to pigmentation. AIMS: This study is to determine the mechanism of persimmon tannin extract in inhibiting pigmentation, to investigate whether the effect of persimmon tannin extract is superior to that of arbutin, and to detect the optimal concentration. METHODS: In this study, the guinea pig pigmentation model was established by ultraviolet B (UVB) irradiation. With arbutin as a positive control, Masson-Fontana silver staining was used to observe the effects of persimmon tannin extract on melanin distribution in guinea pigs' skin tissue. Then, the tyrosinase activity was measured, and an Enzyme-linked immunosorbent assay was used to investigate the contents of antioxidant enzymes, inflammatory factors, and signaling pathway inhibitors in guinea pigs' skin tissue. RESULTS: The results showed that compared with the model group, superoxide dismutase, catalase, glutathione peroxidase, DKK1 content of Wnt/-catenin signaling pathway inhibitors levels, and inhibitory tyrosinase activity were increased by 24.3%, 33.3%, 59.3%, 36.81%, and 17.16%, respectively. Meanwhile, the interleukin-6 and interleukin-8 expression were reduced by approximately 22.2% and 54%. The results also showed that persimmon tannin extract could significantly reduce melanin density. The differences in experimental results were statistically significant (P < .01). CONCLUSIONS: Compared with the arbutin group, the medium-dose group (persimmon tannin extract of 20%) had a more significant effect on inhibiting pigmentation. Persimmon tannin could serve as a promising agent for preventing skin pigmentation. It is expected to provide ideas for the development of deep-processed persimmon products related to functional foods and cosmetics.

Modification of pea dietary fiber by ultrafine grinding and hypoglycemic effect in diabetes mellitus mice.

This study was designed to investigate the effects of ultrafine grinding on the physicochemical properties of pea dietary fiber (PDF) and the hypoglycemic effect of ultrafine grinding dietary fiber on diabetes mellitus (DM). So, the PDF was treated by ultrafine grinding technology, and its microstructure and physicochemical properties were determined. Then, the DM model was established, and the 4-week ultrafine grinded pea dietary fiber (UGPDF) diet intervention was conducted by using gavage and feeding. During this period, the blood glucose and body weight of the mice were measured, and an oral glucose tolerance test was measured on the last day. The biochemical blood indexes of the mice were determined, and the pancreas was stained with HE after dissecting. The results showed that after ultrafine grinding, the structure fragmentation, specific surface area increased, and UGPDF showed higher swelling ability as well as water and oil holding capacities. Simultaneously, UGPDF had a significant effect on reducing blood glucose and glycosylated hemoglobin in DM mice, improving the wasting state of mice and increasing the tolerance to glucose. Further, the results of the HE section showed that the pancreatic islet cells gradually returned to normal regular morphology. In biochemical blood indicators, UGPDF reduced TC and TG levels in the blood. This study provided a specific data basis for the following research on the hypoglycemic mechanism, and broadens the application field of PDF. PRACTICAL APPLICATION: The physicochemical properties of pea dietary fiber were improved by ultrafine grinding technology. Because of this, the application of pea dietary fiber in the field of hypoglycemic had a better effect, laying a foundation for the next research on hypoglycemic mechanism.

Optimal Hot-Dipped Tinning Process Routine for the Fabrication of Solderable Sn Coatings on Circuit Lead Frames.

Previous studies merely focus on the hot dipping properties of lead frame materials used in electronic industry. Yet, the environmentally friendly and cost-efficient traits of hot-dipped tinning process make it a possible promising surface modification technique compared with electroplating. As a result, the optimal hot-dipped tinning process routine is proposed in this paper. The hot-dipped tinning process of four different types of copper foils (C11000, C19400, C19210, and C70250), pretreatment parameters, mechanical properties of Cu substrates, thickness of IMC (intermetallic compound) layers and coatings, and microstructure of coatings were investigated to determine the copper substrate suitable for hot-dipped tinning and the optimized tinning procedures. The results indicate that a proper increase in alloying elements (e.g., Cu-Fe-P series alloys) towards Cu substrate leads to a decrease in hot dipping performance. The proper process routine is determined as alkaline cleaning→water scrubbing→accelerant solvent dipping→drying→hot-dipped tinning→cooling. The appropriate dipping temperature range is 260 to 280 °C, which assists to maintain acceptable micro hardness (i.e., maintaining at least 95% of the original hardness). The optimal dipping time should be set as 6-10 s. The proposed hot-dipped tinning process routine may present a guideline for the fabrication of tin coating in electronic industry.

Synthesis of Cryolite (Na3AlF6) from Secondary Aluminum Dross Generated in the Aluminum Recycling Process.

Secondary aluminum dross (SAD) is regarded as a solid waste of aluminum recycling process that creates serious environmental and health concerns. However, SAD can also be used as a good source of aluminum, so that utilizing the SAD for the production of valuable products is a promising approach of recycling such waste. In the present work, a novel eco-friendly three-step process was proposed for the synthesis of cryolite (Na3AlF6) from the SAD, and it consisted of (1) water-washing pretreatment of SAD, (2) extraction of Al component via pyro-hydrometallurgy, including low-temperature alkaline smelting, water leaching and purification of leachate in sequence, (3) precipitation of cryolite from the purified NaAlO2 solution using the carbonation method. By analysis of the parameter optimization for each procedure, it was found that the maximum hydrolysis efficiency of aluminum nitride (AlN) in the SAD was around 68.3% accompanied with an extraction efficiency of Al reaching 91.5%. On this basis, the cryolite of high quality was synthesized under the following optimal carbonation conditions: reaction temperature of 75 °C, NaAlO2 concentration of 0.11 mol/L, F/(6Al) molar ratio of 1.10, and 99.99% CO2 gas pressure, and flow rate of 0.2 MPa and 0.5 L/min respectively. The formation of Na3AlF6 phase can be detected by XRD. The morphological feature observed by SEM revealed that the as-synthesized cryolite had a polyhedral shape (~1 µm size) with obvious agglomeration. The chemical composition and ignition loss of the as-synthesized cryolite complied well with the requirements of the Chinese national standard (GB/T 4291-2017).

Vulcanization induced composition regulation of NiO electrode materials with improved electrochemical performances.

It is well known that the electrochemical performances of electrode materials seriously depend on their shapes and structures. In this work, we synthesize NiO/NixSy microspheres by a simple hydrothermal route and vulcanization process. The as-obtained products are used as supercapacitor electrode materials. It delivers a capacitance of 1529.29 F g-1 at 1 A g-1. An asymmetric capacitor using NiO/NixSy as positive electrode is assembled, which keeps capacitive retention of 85.23% (10,000 cycles). The excellent electrochemical performance of NiO/NixSy electrode can be ascribed to the addition of sulfur and synergistic effect between NiO and NixSy structures. It shows that the as-prepared products can be potential electrode materials for emerging energy storage devices.