Filling metal-organic framework mesopores with TiO2 for CO2 photoreduction.

Metal-organic frameworks (MOFs)1-3 are known for their specific interactions with gas molecules4,5; this, combined with their rich and ordered porosity, makes them promising candidates for the photocatalytic conversion of gas molecules to useful products6. However, attempts to use MOFs or MOF-based composites for CO2 photoreduction6-13 usually result in far lower CO2 conversion efficiency than that obtained from state-of-the-art solid-state or molecular catalysts14-18, even when facilitated by sacrificial reagents. Here we create 'molecular compartments' inside MOF crystals by growing TiO2 inside different pores of a chromium terephthalate-based MOF (MIL-101) and its derivatives. This allows for synergy between the light-absorbing/electron-generating TiO2 units and the catalytic metal clusters in the backbones of MOFs, and therefore facilitates photocatalytic CO2 reduction, concurrent with production of O2. An apparent quantum efficiency for CO2 photoreduction of 11.3 per cent at a wavelength of 350 nanometres is observed in a composite that consists of 42 per cent TiO2 in a MIL-101 derivative, namely, 42%-TiO2-in-MIL-101-Cr-NO2. TiO2 units in one type of compartment in this composite are estimated to be 44 times more active than those in the other type, underlining the role of precise positioning of TiO2 in this system.

Silanol-Engineered Nonclassical Growth of Zeolite Nanosheets from Oriented Attachment of Amorphous Protozeolite Nanoparticles.

Zeolite nonclassical growth via particle attachment has been proposed for two decades, yet the attachment mechanism and kinetic regulation remain elusive. Here, nonclassical growth of an MFI-type zeolite has been achieved by using amorphous protozeolite (PZ) nanoparticles containing encapsulated TPA+ templates and abundant silanols (Si-OH) as sole precursors under hydrothermal conditions. The silanol characteristics of the precursor were studied by two-dimensional (2D) solid-state nuclear magnetic resonance (NMR) correlation spectroscopy, which were proven to play critical roles in determining precursor attachment behavior and crystal growth orientation. Under mechanical ball-milling or tablet-pressing process, pressure drove the fusion of spherical PZ into platelet-like integrated PZ (IPZ) coupled with transformations of external silanols from evenly distributed to curvature-dependent distributed and internal silanols from isolated to spatially proximate. Compared to isolated silanols, the spatially proximate silanols possessed a stronger correlation with TPA+, benefiting the formation of Si-O-Si bonds via silanol condensation. Subsequently, driven by minimization of surface energy, particle attachment of the platelet-like IPZ precursor preferentially occurred at high-curvature surfaces with high-density silanols, leading to anisotropic rates of nonclassical growth and thus the formation of high-aspect-ratio MFI-type zeolite nanosheets. Advanced electron microscopy provided direct evidence of attachment of amorphous IPZ precursors to crystalline intermediate surfaces along the c-axis direction with the formation of amorphous-crystalline interfaces, followed by interface elimination and structural evolution to a single-crystalline phase. Our findings not only unravel the zeolite nonclassical growth mechanism but also reveal the critical role of silanol chemistry in kinetic regulation, which is of great importance for pursuing a tailored zeolite synthesis.

Direct Construction of 2D Conductive Metal-Organic Frameworks from a Nonplanar Ligand: In Situ Scholl Reaction and Topological Modulation.

Two-dimensional conductive metal-organic frameworks (2D c-MOFs) are an emerging class of promising porous materials with high crystallinity, tunable structures, and diverse functions. However, the limited topologies and difficulties in synthesizing suitable organic linkers remain a great challenge for 2D c-MOFs synthesis and applications. Herein, two layered 2D c-MOF polymorphs with either a rhombus structure (sql-TBA-MOF) or kagome structure (kgm-TBA-MOF) were directly constructed via in situ Scholl reaction and coordination chemistry from a flexible and nonplanar tetraphenylbenzene-based ligand (8OH-TPB) in a one-pot manner. Interestingly, the kgm-TBA-MOF comprising hexagonal and triangular dual pores exhibit higher conductivities of 1.65 × 10-3 S/cm at 298 K and 3.33 × 10-2 S/cm at 353 K than that of sql-TBA-MOF (4.48 × 10-4 and 2.90 × 10-3 S/cm, respectively). Moreover, the morphology and topology can be modulated via the addition of ammonium hydroxide as modulator. The present work provides a new pathway for design, synthesis, and topological regulation of 2D c-MOFs.

Reticular Synthesis of Highly Crystalline Three-Dimensional Mesoporous Covalent-Organic Frameworks for Lipase Inclusion.

The synthesis and application of three-dimensional (3D) mesoporous covalent-organic frameworks (COFs) are still to be developed. Herein, two mesoporous 3D COFs with an stp topology were synthesized in a highly crystalline form with aniline as the modulator. The chemical composition of these COFs was confirmed by Fourier transform infrared (FT-IR) and 13C cross-polarization magic angle spinning nuclear magnetic resonance (NMR) spectroscopies. These 3D mesoporous COFs were highly crystalline and exhibited permanent porosity and good chemical stability in both aqueous and organic media. The space group and unit cell parameters of COF HFPTP-TAE were verified by powder X-ray diffraction (PXRD), small-angle X-ray scattering, and three-dimensional electron diffraction (3D ED). The appropriate pore size of the COF HFPTP-TAE facilitated the inclusion of enzyme lipase PS with a loading amount of 0.28 g g-1. The lipase⊂HFPTP-TAE (⊂ refers to "include in") composite exhibited high catalytic activity, good thermal stability, and a wide range of solvent tolerance. Specifically, it could catalyze the alcoholysis of aspirin methyl ester (AME) with high catalytic efficiency. Oriented one-dimensional (1D) channel mesopores in HFPTP-TAE accommodated lipase, meanwhile preventing them from aggregation, while windows on the wall of the 1D channel favored molecular diffusion; thus, this COF-enzyme design outperformed its amorphous isomer, two-dimensional (2D) mesoporous COF, 3D mesoporous COF with limited crystallinity, and mesoporous silica as an enzyme host.

Conjugated Nonplanar Copper-Catecholate Conductive Metal-Organic Frameworks via Contorted Hexabenzocoronene Ligands for Electrical Conduction.

Conductive metal-organic frameworks (c-MOFs) with outstanding electrical conductivities and high charge carrier mobilities are promising candidates for electronics and optoelectronics. However, the poor solubility of planar ligands greatly hinders the synthesis and widespread applications of c-MOFs. Nonplanar ligands with excellent solubility in organic solvents are ideal alternatives to construct c-MOFs. Herein, contorted hexabenzocoronene (c-HBC) derivatives with good solubility are adopted to synthesize c-MOFs. Three c-MOFs (c-HBC-6O-Cu, c-HBC-8O-Cu, and c-HBC-12O-Cu) with substantially different geometries and packing modes have been synthesized using three multitopic catechol-based c-HBC ligands with different symmetries and coordination numbers, respectively. With more metal coordination centers and increased charge transport pathways, c-HBC-12O-Cu exhibits the highest intrinsic electrical conductivity of 3.31 S m-1. Time-resolved terahertz spectroscopy reveals high charge carrier mobilities in c-HBC-based c-MOFs, ranging from 38 to 64 cm2 V-1 s-1. This work provides a systematic and modular approach to fine-tune the structure and enrich the c-MOF family with excellent charge transport properties using nonplanar and highly soluble ligands.

Can NbO Keep nbo Topology under Electrons? -Unveiling Novel Aspects of Niobium Monoxide at the Atomic Scale.

A precise investigation of NbO has been carried out by advanced electron microscopy combined with powder and single crystal X-ray diffraction (XRD). The structure of pristine NbO has been determined as Pm-3 m space group (SG) with a = 4.211 Šand the positions of Nb and O at the 3c and 3d Wyckoff positions, respectively, which is consistent with previous report based on powder XRD data. Electron beams induced a structural transition, which was investigated and explained by combining electron diffraction and atomic-resolution imaging. The results revealed that the electron beam stimulated both Nb and O atom-migrations within each fcc sublattice, and that the final structure was SG Fm-3 m with a = 4.29 Å, Nb and O at the 4a and 4b with 75 % occupancy and same chemical composition. Antiphase planar defects were discovered in the pristine NbO and related to the structural transformation. Theoretical calculations performed by density functional theory (DFT) supported the experimental conclusions.

General Synergistic Capture-Bonding Superassembly of Atomically Dispersed Catalysts on Micropore-Vacancy Frameworks.

Atomically dispersed catalysts are a new type of material in the field of catalysis science, yet their large-scale synthesis under mild conditions remains challenging. Here, a general synergistic capture-bonding superassembly strategy to obtain atomically dispersed Pt (Ru, Au, Pd, Ir, and Rh)-based catalysts on micropore-vacancy frameworks at a mild temperature of 60 °C is reported. The precise capture via narrow pores and the stable bonding of vacancies not only simplify the synthesis process of atomically dispersed catalysts but also realize their large-scale preparation at mild temperature. The prepared atomically dispersed Pt-based catalyst possesses a promising electrocatalytic activity for hydrogen evolution, showing an activity (at overpotential of 50 mV) about 21.4 and 20.8 times higher than that of commercial Pt/C catalyst in 1.0 M KOH and 0.5 M H2SO4, respectively. Besides, the extremely long operational stability of more than 100 h provides more potential for its practical application.

Constructing Intrapenetrated Hierarchical Zeolites with Highly Complete Framework via Protozeolite Seeding.

Creation of intrapenetrated mesopores with open highway from external surface into the interior of zeolite crystals are highly desirable that can significantly improve the molecular transport and active sites accessibility of microporous zeolites to afford enhanced catalytic properties. Here, different from traditional zeolite-seeded methods that generally produced isolated mesopores in zeolites, nanosized amorphous protozeolites with embryo structure of zeolites were used as seeds for the construction of single-crystalline hierarchical ZSM-5 zeolites with intrapenetrated mesopores (mesopore volume of 0.51 cm3 g-1 ) and highly complete framework. In this strategy, in contrast to the conventional synthesis, only a small amount of organic structure directing agents and a low crystallization temperature were adopted to promise the protozeolites as the dominant growth directing sites to induce crystallization. The protozeolite nanoseeds provided abundant nucleation sites for surrounding precursors to be crystallized, followed by oriented coalescence of crystallites resulting in the formation of intrapenetrated mesopores. The as-prepared hierarchical ZSM-5 zeolites exhibited ultra-long lifetime of 443.9 hours and a high propylene selectivity of 47.92 % at a WHSV of 2 h-1 in the methanol-to-propylene reaction. This work provides a facile protozeolite-seeded strategy for the synthesis of intrapenetrated hierarchical zeolites that are highly effective for catalytic applications.

Direct TEM Observation of Vacancy-Mediated Heteroatom Incorporation into a Zeolite Framework: Towards Microscopic Design of Zeolite Catalysts.

Incorporating hetero-metal-atom, e.g., titanium, into zeolite frameworks can enhance the catalytic activity and selectivity in oxidation reactions. However, the rational design of zeolites containing titanium at specific sites is difficult because the precise atomic structure during synthesis process remained unclear. Here, a titanosilicate with predictable titanium distribution was synthesized by mediating vacancies in a defective MSE-type zeolite precursor, based on a pre-designed synthetic route including modification of vacancies followed by titanium insertion, where electron microscopy (EM) plays a key role at each step resolving the atomic structure. Point defects including vacancies in the precursor and titanium incorporated into the vacancy-related positions have been directly observed. The results provide insights into the role of point defects in zeolites towards the rational synthesis of zeolites with desired microscopic arrangement of catalytically active sites.

Protozeolite-Seeded Synthesis of Single-Crystalline Hierarchical Zeolites with Facet-Shaped Mesopores and Their Catalytic Application in Methanol-to-Propylene Conversion.

Hierarchical zeolites integrating intrinsic micropores with secondary meso- and/or macropores afford superior catalytic properties for enhanced mass transportation and more accessible active sites. The mesopores generated by using mesoporogens or framework etching are usually irregular with abundant defective sites and low hydrothermal stability. Here, using protozeolite nanoparticles as seeds, we succeeded in the synthesis of single-crystalline hierarchical ZSM-5 zeolites with hexagonal mesopores faceted by complete microporous frameworks. The protozeolites played a key role in the formation of faceted mesopores achieved via intraparticle ripening process. Thanks to the unique texture properties and more accessible acid sites at the open location, the as-prepared zeolites exhibited remarkedly long lifetime (18 h) and high propylene selectivity (52.7 %) with propylene/ethylene ratio of 3.64 in the methanol-to-propylene reaction (WHSV=12.5 h-1 ) compared to the counterparts.

Kinetics-Regulated Interfacial Selective Superassembly of Asymmetric Smart Nanovehicles with Tailored Topological Hollow Architectures.

Hollow nanoparticles featuring tunable structures with spatial and chemical specificity are of fundamental interest. However, it remains a significant challenge to design and synthesize asymmetric nanoparticles with controllable topological hollow architecture. Here, a versatile kinetics-regulated cooperative polymerization induced interfacial selective superassembly strategy is demonstrated to construct a series of asymmetric hollow porous composites (AHPCs) with tunable diameters, architectures and components. The size and number of patches on Janus nanoparticles can be precisely manipulated by the precursor and catalyst content. Notably, AHPCs exhibit excellent photothermal conversion performance under the irradiation of a near infrared (NIR) laser. Thus, AHPCs are utilized as NIR light-triggered nanovehicles and cargos can be controllably released. In brief, this versatile superassembly approach offers a streamlined and powerful toolset to design diverse asymmetric hollow porous composites.

In Situ Mapping and Local Negative Uptake Behavior of Adsorbates in Individual Pores of Metal-Organic Frameworks.

Herein, we report the adsorbate behavior in individual local pores of MIL-101, which is a metal-organic framework (MOF) with two heterogeneous mesopores and different metal sites, by combining adsorbate isotherms and in situ crystallography profiles. The in situ mapping shows that the substrate-adsorbate interaction affects the initial adsorption and pore condensation steps. The monolayer adsorption gradient changes greatly depending on the framework metal-adsorbate attraction force. Also, broad inflection points are found in adsorption isotherms, and the initial shape depends on the different metals. Besides, the capillary condensation at a pore draws adsorbates from other local pores. This leads to the local negative uptake behavior in individual pore isotherms. At higher pressure, they move to a larger space, whereas in a relatively low-pressure range the attraction force between the MOF framework and guest molecule influences the amount of rearranged guest molecules. Furthermore, the origin of the characteristic adsorption behavior based on the metals constituting the MOFs and the relative strength of substrate-adsorbate and adsorbate-adsorbate interactions are elucidated through the combined study of electron densities in pores, electron paramagnetic resonance spectroscopy spectra, and density functional theory and Monte Carlo simulations to uncover the previously veiled information on adsorption behavior.

Extra adsorption and adsorbate superlattice formation in metal-organic frameworks.

Metal-organic frameworks (MOFs) have a high internal surface area and widely tunable composition, which make them useful for applications involving adsorption, such as hydrogen, methane or carbon dioxide storage. The selectivity and uptake capacity of the adsorption process are determined by interactions involving the adsorbates and their porous host materials. But, although the interactions of adsorbate molecules with the internal MOF surface and also amongst themselves within individual pores have been extensively studied, adsorbate-adsorbate interactions across pore walls have not been explored. Here we show that local strain in the MOF, induced by pore filling, can give rise to collective and long-range adsorbate-adsorbate interactions and the formation of adsorbate superlattices that extend beyond an original MOF unit cell. Specifically, we use in situ small-angle X-ray scattering to track and map the distribution and ordering of adsorbate molecules in five members of the mesoporous MOF-74 series along entire adsorption-desorption isotherms. We find in all cases that the capillary condensation that fills the pores gives rise to the formation of 'extra adsorption domains'-that is, domains spanning several neighbouring pores, which have a higher adsorbate density than non-domain pores. In the case of one MOF, IRMOF-74-V-hex, these domains form a superlattice structure that is difficult to reconcile with the prevailing view of pore-filling as a stochastic process. The visualization of the adsorption process provided by our data, with clear evidence for initial adsorbate aggregation in distinct domains and ordering before an even distribution is finally reached, should help to improve our understanding of this process and may thereby improve our ability to exploit it practically.

Physicochemical Understanding of the Impact of Pore Environment and Species of Adsorbates on Adsorption Behaviour.

For a better design of adsorbents, it is important to know the intermolecular interaction among adsorbates and host material, leading to improved guest selectivity and uptake capacity. In this study, we demonstrate the influence of the interaction among adsorbates and substrate, controlled by the pore environment and species of adsorbates, on the adsorption behaviour. We report the unique CO2 adsorption behaviour of MOF-205 due to distinct pore geometry. The precise analysis through gas-adsorption crystallography with molecular simulation shows that capillary condensation of CO2 in MOF-205 occurs preferentially in the large dodecahedral pore rather than the small tetrahedral pore, because the interaction of CO2 with MOF-205 framework is weaker than that among CO2 molecules, while Ar and N2 are sequentially filled into two different pores of MOF-205 according to their size. Comparison of the materials with different pore environments reveals that the relative strength of the adsorbate-adsorbate and adsorbate-substrate interaction gives rise to different shapes of isotherms.

Tricycloquinazoline-Based 2D Conductive Metal-Organic Frameworks as Promising Electrocatalysts for CO2 Reduction.

2D conductive metal-organic frameworks (2D c-MOFs) are promising candidates for efficient electrocatalysts for the CO2 reduction reaction (CO2 RR). A nitrogen-rich tricycloquinazoline (TQ) based multitopic catechol ligand was used to coordinate with transition-metal ions (Cu2+ and Ni2+ ), which formed 2D graphene-like porous sheets: M3 (HHTQ)2 (M=Cu, Ni; HHTQ=2,3,7,8,12,13-Hexahydroxytricycloquinazoline). M3 (HHTQ)2 can be regarded as a single-atom catalyst where Cu or Ni centers are uniformly distributed in the hexagonal lattices. Cu3 (HHTQ)2 exhibited superior catalytic activity towards CO2 RR in which CH3 OH is the sole product. The Faradic efficiency of CH3 OH reached up to 53.6 % at a small over-potential of -0.4 V. Cu3 (HHTQ)2 exhibited larger CO2 adsorption energies and higher activities over the isostructural Ni3 (HHTQ)2 and the reported archetypical Cu3 (HHTP)2 . There is a strong dependence of both metal centers and the N-rich ligands on the electrocatalytic performance.

Enantiomerically enriched, polycrystalline molecular sieves.

Zeolite and zeolite-like molecular sieves are being used in a large number of applications such as adsorption and catalysis. Achievement of the long-standing goal of creating a chiral, polycrystalline molecular sieve with bulk enantioenrichment would enable these materials to perform enantioselective functions. Here, we report the synthesis of enantiomerically enriched samples of a molecular sieve. Enantiopure organic structure directing agents are designed with the assistance of computational methods and used to synthesize enantioenriched, polycrystalline molecular sieve samples of either enantiomer. Computational results correctly predicted which enantiomer is obtained, and enantiomeric enrichment is proven by high-resolution transmission electron microscopy. The enantioenriched and racemic samples of the molecular sieves are tested as adsorbents and heterogeneous catalysts. The enantioenriched molecular sieves show enantioselectivity for the ring opening reaction of epoxides and enantioselective adsorption of 2-butanol (the R enantiomer of the molecular sieve shows opposite and approximately equal enantioselectivity compared with the S enantiomer of the molecular sieve, whereas the racemic sample of the molecular sieve shows no enantioselectivity).

Investigation of the Image Contrast in an Ultra-Low Voltage Scanning Electron Microscope Using an Auger Electron Spectrometer.

Surface-sensitive information on a bulk sample can be obtained by using a low incident electron energy (low accelerating voltage/landing voltage) in a scanning electron microscope (SEM). However, topography and composition contrast obtained at low incident electron energies may not be intuitive and should be analyzed carefully. By combining an Auger electron spectrometer (AES) with a low incident electron energy SEM (LE-SEM), we investigated the SEM contrast carefully by separating the secondary electron (SE) and back-scattered electron (BSE) components with high accuracy. For this, we modified an AES to measure the electron energy in the range of 0­0.6 keV with a sample bias voltage of 0 to −0.3 keV. We could clearly observe reversed brightness of gold and carbon (graphite) in BSE images when the energy of the incident electrons was reduced to 0.2­0.3 keV. In addition, reflected electron energy spectroscopy (REELS) is known to be a tool for chemical state analysis of the sample. We demonstrated that it is possible to study the electron states of graphite, diamond, and graphene by acquiring low incident energy REELS spectra from their surfaces with the newly modified AES. This will be a new method for analyzing the electron states of local areas of a surface.

Electron Microscopy Studies of Local Structural Modulations in Zeolite Crystals.

Zeolites are widely used in catalysis, gas separation, ion exchange, etc. due to their superior physicochemical properties, which are closely related to specific features of their framework structures. Although more than two hundred different framework types have been recognized, it is of great interest to explore from a crystallographic perspective, the atomic positions, surface terminations, pore connectivity and structural defects that deviate from the ideal framework structures, namely local structural modulation. In this article, we review different types of local modulations in zeolite frameworks using various techniques, especially electron microscopy (EM). The most recent advances in resolving structural information at the atomic level with aberration corrected EM are also presented, commencing a new era of gaining atomic structural information, not only for all tetrahedral atoms including point vacancies in framework but also for extra-framework cations and surface terminations.

Conjugated Copper-Catecholate Framework Electrodes for Efficient Energy Storage.

A conjugated copper(II) catecholate based metal-organic framework (namely Cu-DBC) was prepared using a D2 -symmetric redox-active ligand in a copper bis(dihydroxy) coordination geometry. The π-d conjugated framework exhibits typical semiconducting behavior with a high electrical conductivity of ca. 1.0 S m-1 at room temperature. Benefiting from the good electrical conductivity and the excellent redox reversibility of both ligand and copper centers, Cu-DBC electrode features superior capacitor performances with gravimetric capacitance up to 479 F g-1 at a discharge rate of 0.2 A g-1 . Moreover, the symmetric solid-state supercapacitor of Cu-DBC exhibits high areal (879 mF cm-2 ) and volumetric (22 F cm-3 ) capacitances, as well as good rate capability. These metrics are superior to most reported MOF-based supercapacitors, demonstrating promising applications in energy-storage devices.