Molecular Compositions, Mutagenicity, and Mutation Spectra of Atmospheric Oxidation Products of Alkenes and Dienes Initiated by NOx + UV or Ozone: A Structure-Activity Analysis.

Photooxidation products resulting from volatile organic compounds (VOCs) reacting with sunlight are important contributors to gas-phase air pollution. We characterized the product-weighted mutagenic potencies (rev m3 mgC-1 h-1) in Salmonella TA100 of atmospheres resulting from the hydroxyl radical (OH)-initiated photochemical oxidation of 11 C4 or C5 alkenes or dienes in the presence of nitric oxide (NO) and from the ozonolysis of four VOCs without NO (isoprene; 1,3-pentadiene; 1,4-pentadiene; and 1,3-butadiene). Irradiated atmospheres from precursors with a single C═C bond (3-methyl-1-butene, 2-methyl-1-butene, cis/trans-2-pentene, 2-methyl-2-butene, 1-butene, and 1-pentene) had low potencies (<5), whereas linear dienes with terminal C═C bonds had high potencies (50-65). Dienes with a branched structure (isoprene) or internal C═C bonds (1,3-pentadiene) had intermediate potencies (15-20). No VOCs were mutagenic without photochemical oxidation. VOCs+O3 in the dark produced less mutagenic atmospheres than photochemistry in the presence of NO. Atmospheres induced primarily C to T and C to A mutations, the main base substitutions in nonsmoker lung cancer. Atmospheres from the photooxidation of isoprene and 1,3-pentadiene also induced GG to TT, the signature mutation of peroxyacetyl nitrate. Five molecular compositions identified by Chemical Ionization Mass Spectrometry (CIMS), most containing nitrogen, correlated (r = 0.76-0.85) with the mutagenic potencies of irradiated atmospheres; most had a likely nitrate functional group. Assessment of the mutagenicity of emitted VOCs should consider VOC photooxidation products, especially dienes with terminal C═C bonds, as these products likely contribute to overall health effects from ambient air pollution.

Mutagenic Atmospheres Generated from the Photooxidation of NOx with Selected VOCs and a Complex Mixture: Apportionment of Aromatic Mutagenicity for Reacted Gasoline Vapor.

The interaction of sunlight with volatile organic compounds (VOCs) emitted from various sources results in mutagenic photooxidation products that contribute substantially to air pollution. Evaporation of gasoline is one such source of VOCs; however, no studies have evaluated the mutagenicity of the photooxidation products of gasoline vapors or of many of the non-aromatic constituent VOCs of gasoline. Here we determined the mutagenicity in Salmonella TA100 of atmospheres generated in a steady-state atmospheric simulation chamber by irradiating gasoline and individual non-aromatic VOCs in the presence of nitrogen oxides (NOX) in air. In addition to gasoline, we evaluated α-pinene; 2-pentene; ethanol; isobutanol; isoprene; and 2,2,4-trimethylpentane (isooctane). Cells were exposed at the air-agar interface to the atmospheres for 1, 2, 4, 8, or 16 h. Atmospheres generated in the dark were not mutagenic. However, under irradiation all atmospheres other than that of 2,2,4-trimethylpentane were mutagenic, with mutagenic potencies spanning 8.6-fold. The mutagenicity was due exclusively to direct-acting, late-generation photooxidation products. The non-aromatic VOCs studied here contributed little to the mutagenic potency of the photooxidation products of gasoline. However, the sum of the mutagenic potencies of these atmospheres plus those from the photooxidation of some aromatic VOCs in gasoline measured here and elsewhere (Riedel et al., Atmos Environ, 178:164, 2018) accounted for 71% of the mutagenic potency of the photooxidation products of gasoline vapor. In photochemical mixtures with strong biogenic contributions, isoprene products may also contribute significantly to mutagenic potency. Strategies to reduce the emissions of gasoline and those VOCs whose photooxidation products are most mutagenic would reduce VOC-associated air pollution and improve public health.

Quantifying wintertime O3 and NOx formation with relevance vector machines.

This paper uses a machine learning model called a relevance vector machine (RVM) to quantify ozone (O3) and nitrogen oxides (NOx) formation under wintertime conditions. Field study measurements were based on previous work described by Olson et al. (2019), where continuous measurements were reported from a wintertime field study in Utah. RVMs were formulated using either O3 or nitrogen dioxide (NO2) as the output variable. Values of the correlation coefficient (r2) between predicted and measured concentrations were 0.944 for O3 and 0.931 for NO2. RVMs are constructed from the observed measurements and result in sparse model formulations, meaning that only a subset of the data is used to approximate the entire dataset. For this study, the RVM with O3 as the output variable used only 20% of the measurement data while the RVM with NO2 used 16%. RVMs were then used as a predictive model to assess the importance of individual precursors. Using O3 as the output variable, increases in three species resulted in increased O3 concentrations: hydrogen peroxide (H2O2), dinitrogen pentoxide (N2O5), and molecular chlorine (Cl2). For the two termination products measured during the study, nitric acid (HNO3) and formic acid (CH2O2), no change in O3 concentration was observed. Using NO2 as the output variable, only increases in N2O5 resulted in increased NO2 concentrations.

Data mining approaches to understanding the formation of secondary organic aerosol.

This research used data mining approaches to better understand factors affecting the formation of secondary organic aerosol (SOA). Although numerous laboratory and computational studies have been completed on SOA formation, it is still challenging to determine factors that most influence SOA formation. Experimental data were based on previous work described by Offenberg et al. (2017), where volume concentrations of SOA were measured in 139 laboratory experiments involving the oxidation of single hydrocarbons under different operating conditions. Three different data mining methods were used, including nearest neighbor, decision tree, and pattern mining. Both decision tree and pattern mining approaches identified similar chemical and experimental conditions that were important to SOA formation. Among these important factors included the number of methyl groups for the SOA precursor, the number of rings for the SOA precursor, and the presence of dinitrogen pentoxide (N2O5).

Relative contributions of selected multigeneration products to chamber SOA formed from photooxidation of a range (C10-C17) of n-alkanes under high NO x conditions.

A series of chamber experiments was conducted to investigate the composition of secondary organic aerosol (SOA) following oxidation of a range of parent n-alkanes (C10-C17) in the presence of NO x . The relative contribution of selected species representing first, second, and higher generation products to SOA mass was measured using a high-resolution aerosol mass spectrometer. Gas chromatography was also used for a limited set of amenable species. Relative contributions varied substantially across the range of investigated alkanes reflecting slight changes in SOA composition. The contribution of first-generation cyclic hemiacetal is minimal toward the small end of the investigated range and gradually increase with n-alkane size. The relative contribution of second generation and higher nitrate-containing species, in contrast, decrease with an increased alkane size. A similar trend is observed for relative contribution of organonitrates to SOA. Finally, SOA yield and composition are sensitive to water vapor concentrations. This sensitivity is limited to a narrow range (dry to ~15% RH) with little, if any, impact above 15% suggesting that this impact may be negligible under ambient conditions. The impact of water vapor also appears to decrease with increasing alkane carbon number.

Time series analysis of wintertime O3 and NOx formation using vector autoregressions.

Concentrations of 11 species are reported from continuous measurements taken during a wintertime field study in Utah. Time series data for measured species generally displayed strong diurnal patterns. Six species show a diurnal pattern of daytime maximums (NO, NOy, O3, H2O2, CH2O2, and Cl2), while five species show a diurnal pattern of night time maximums (NO2, HONO, ClNO2, HNO3, and N2O5). Vector autoregression analyses were completed to better understand important species influencing the formation of O3 and NOx. For the species studied, r2 values of predicted versus measured concentrations ranged from 0.82-0.99. Fitting parameters for the autoregressive matrix, Π, indicated the importance of species precursors. In addition, values of fitting parameters for Π were relatively insensitive to data size, with variations generally <10%. Variable causation was quantified using the Granger causation method. Assuming O3 and NOx behave as chemical products, reactants (in order of importance) are as follows: H2O2, N2O5, HONO, and ClNO2.

Mutagenic atmospheres resulting from the photooxidation of aromatic hydrocarbon and NOx mixtures.

Although many volatile organic compounds (VOCs) are regulated to limit air pollution and the consequent health effects, the photooxidation products generally are not. Thus, we examined the mutagenicity in Salmonella TA100 of photochemical atmospheres generated in a steady-state atmospheric simulation chamber by irradiating mixtures of single aromatic VOCs, NOx, and ammonium sulfate seed aerosol in air. The 10 VOCs examined were benzene; toluene; ethylbenzene; o-, m-, and p-xylene; 1,2,4- and 1,3,5-trimethylbenzene; m-cresol; and naphthalene. Salmonella were exposed at the air-agar interface to the generated atmospheres for 1, 2, 4, 8, or 16 h. Dark-control exposures produced non-mutagenic atmospheres, illustrating that the gas-phase precursor VOCs were not mutagenic at the concentrations tested. Under irradiation, all but m-cresol and naphthalene produced mutagenic atmospheres, with potencies ranging from 2.0 (p-xylene) to 10.4 (ethylbenzene) revertants m3 mgC-1 h-1. The mutagenicity was due exclusively to direct-acting late-generation products of the photooxidation reactions. Gas-phase chemical analysis showed that a number of oxidized organic chemical species enhanced during the irradiated exposure experiments correlated (r ≥ 0.81) with the mutagenic potencies of the atmospheres. Molecular formulas assigned to these species indicated that they likely contained peroxy acid, aldehyde, alcohol, and other functionalities.

Predicting Thermal Behavior of Secondary Organic Aerosols.

Volume concentrations of secondary organic aerosol (SOA) are measured in 139 steady-state, single precursor hydrocarbon oxidation experiments after passing through a temperature controlled inlet. The response to change in temperature is well predicted through a feedforward Artificial Neural Network. The most parsimonious model, as indicated by Akaike's Information Criterion, Corrected (AIC,C), utilizes 11 input variables, a single hidden layer of 4 tanh activation function nodes, and a single linear output function. This model predicts thermal behavior of single precursor aerosols to less than ±5%, which is within the measurement uncertainty, while limiting the problem of overfitting. Prediction of thermal behavior of SOA can be achieved by a concise number of descriptors of the precursor hydrocarbon including the number of internal and external double bonds, number of methyl- and ethyl- functional groups, molecular weight, and number of ring structures, in addition to the volume of SOA formed, and an indicator of which of four oxidant precursors was used to initiate reactions (NOx photo-oxidation, photolysis of H2O2, ozonolysis, or thermal decomposition of N2O5). Additional input variables, such as chamber volumetric residence time, relative humidity, initial concentration of oxides of nitrogen, reacted hydrocarbon concentration, and further descriptors of the precursor hydrocarbon, including carbon number, number of oxygen atoms, and number of aromatic ring structures, lead to over fit models, and are unnecessary for an efficient, accurate predictive model of thermal behavior of SOA. This work indicates that predictive statistical modeling methods may be complementary to descriptive techniques for use in parametrization of air quality models.

A large atomic chlorine source inferred from mid-continental reactive nitrogen chemistry.

Halogen atoms and oxides are highly reactive and can profoundly affect atmospheric composition. Chlorine atoms can decrease the lifetimes of gaseous elemental mercury and hydrocarbons such as the greenhouse gas methane. Chlorine atoms also influence cycles that catalytically destroy or produce tropospheric ozone, a greenhouse gas potentially toxic to plant and animal life. Conversion of inorganic chloride into gaseous chlorine atom precursors within the troposphere is generally considered a coastal or marine air phenomenon. Here we report mid-continental observations of the chlorine atom precursor nitryl chloride at a distance of 1,400 km from the nearest coastline. We observe persistent and significant nitryl chloride production relative to the consumption of its nitrogen oxide precursors. Comparison of these findings to model predictions based on aerosol and precipitation composition data from long-term monitoring networks suggests nitryl chloride production in the contiguous USA alone is at a level similar to previous global estimates for coastal and marine regions. We also suggest that a significant fraction of tropospheric chlorine atoms may arise directly from anthropogenic pollutants.

Reactive uptake of an isoprene-derived epoxydiol to submicron aerosol particles.

The reactive uptake of isoprene-derived epoxydiols (IEPOX) is thought to be a significant source of atmospheric secondary organic aerosol (SOA). However, the IEPOX reaction probability (γIEPOX) and its dependence upon particle composition remain poorly constrained. We report measurements of γIEPOX for trans-ß-IEPOX, the predominant IEPOX isomer, on submicron particles as a function of composition, acidity, and relative humidity (RH). Particle acidity had the strongest effect. γIEPOX is more than 500 times greater on ammonium bisulfate (γ ∼ 0.05) than on ammonium sulfate (γ ≤ 1 × 10(-4)). We could accurately predict γIEPOX using an acid-catalyzed, epoxide ring-opening mechanism and a high Henry's law coefficient (1.7 × 10(8) M/atm). Suppression of γIEPOX was observed on particles containing both ammonium bisulfate and poly(ethylene glycol) (PEG-300), likely due to diffusion and solubility limitations within a PEG-300 coating, suggesting that IEPOX uptake could be self-limiting. Using the measured uptake kinetics, the predicted atmospheric lifetime of IEPOX is a few hours in the presence of highly acidic particles (pH < 0) but is greater than 25 h on less acidic particles (pH > 3). This work highlights the importance of aerosol acidity for accurately predicting the fate of IEPOX and anthropogenically influenced biogenic SOA formation.

On the role of particle inorganic mixing state in the reactive uptake of N2O5 to ambient aerosol particles.

The rates of heterogeneous reactions of trace gases with aerosol particles are complex functions of particle chemical composition, morphology, and phase state. Currently, the majority of model parametrizations of heterogeneous reaction kinetics focus on the population average of aerosol particle mass, assuming that individual particles have the same chemical composition as the average state. Here we assess the impact of particle mixing state on heterogeneous reaction kinetics using the N2O5 reactive uptake coefficient, γ(N2O5), and dependence on the particulate chloride-to-nitrate ratio (nCl(-)/nNO3(-)). We describe the first simultaneous ambient observations of single particle chemical composition and in situ determinations of γ(N2O5). When accounting for particulate nCl(-)/nNO3(-) mixing state, model parametrizations of γ(N2O5) continue to overpredict γ(N2O5) by more than a factor of 2 in polluted coastal regions, suggesting that chemical composition and physical phase state of particulate organics likely control γ(N2O5) in these air masses. In contrast, direct measurement of γ(N2O5) in air masses of marine origin are well captured by model parametrizations and reveal limited suppression of γ(N2O5), indicating that the organic mass fraction of fresh sea spray aerosol at this location does not suppress γ(N2O5). We provide an observation-based framework for assessing the impact of particle mixing state on gas-particle interactions.

Applying a Phase-Separation Parameterization in Modeling Secondary Organic Aerosol Formation from Acid-Driven Reactive Uptake of Isoprene Epoxydiols under Humid Conditions.

Secondary organic aerosol (SOA) from acid-driven reactive uptake of isoprene epoxydiols (IEPOX) contributes up to 40% of organic aerosol (OA) mass in fine particulate matter. Previous work showed that IEPOX substantially converts particulate inorganic sulfates to surface-active organosulfates (OSs). This decreases aerosol acidity and creates a viscous organic-rich shell that poses as a diffusion barrier, inhibiting additional reactive uptake of IEPOX. To account for this "self-limiting" effect, we developed a phase-separation box model to evaluate parameterizations of IEPOX reactive uptake against time-resolved chamber measurements of IEPOX-SOA tracers, including 2-methyltetrols (2-MT) and methyltetrol sulfates (MTS), at ~ 50% relative humidity. The phase-separation model was most sensitive to the mass accommodation coefficient, IEPOX diffusivity in the organic shell, and ratio of the third-order reaction rate constants forming 2-MT and MTS ( k M T / k M T S ). In particular, k M T / k M T S had to be lower than 0.1 to bring model predictions of 2-MT and MTS in closer agreement with chamber measurements; prior studies reported values larger than 0.71. The model-derived rate constants favor more particulate MTS formation due to 2-MT likely off-gassing at ambient-relevant OA loadings. Incorporating this parametrization into chemical transport models is expected to predict lower IEPOX-SOA mass and volatility due to the predominance of OSs.

Nitryl chloride and molecular chlorine in the coastal marine boundary layer.

The magnitude and sources of chlorine atoms in marine air remain highly uncertain but have potentially important consequences for air quality in polluted coastal regions. We made continuous measurements of ambient ClNO(2) and Cl(2) concentrations from May 15 to June 8 aboard the Research Vessel Atlantis during the CalNex 2010 field study. In the Los Angeles region, ClNO(2) was more ubiquitous than Cl(2) during most nights of the study period. ClNO(2) and Cl(2) ranged from detection limits at midday to campaign maximum values at night reaching 2100 and 200 pptv, respectively. The maxima were observed in Santa Monica Bay when sampling the Los Angeles urban plume. Cl(2) at times appeared well correlated with ClNO(2), but at other times, there was little to no correlation implying distinct and varying sources. Well-confined Cl(2) plumes were observed, largely independent of ClNO(2), providing support for localized industrial emissions of reactive chlorine. Observations of ClNO(2), Cl(2), and HCl are used to constrain a simple box model that predicts their relative importance as chlorine atom sources in the polluted marine boundary layer. In contrast to the emphasis in previous studies, ClNO(2) and HCl are dominant primary chlorine atom sources for the Los Angeles basin.

Rapid production of highly oxidized molecules in isoprene aerosol via peroxy and alkoxy radical isomerization pathways in low and high NOx environments: Combined laboratory, computational and field studies.

Recently, we identified seven novel hydroxy-carboxylic acids resulting from gas-phase reactions of isoprene in the presence of nitrogen oxides (NOx), ozone (O3), and/or hydroxyl radicals (OH). In the present study, we provide evidence that hydroxy-carboxylic acids, namely methyltartaric acids (MTA) are: (1) reliable isoprene tracers, (2) likely produced via rapid peroxy radical hydrogen atom (H) shift reactions (autoxidation mechanism) and analogous alkoxy radical H shifts in low and high NOx environments respectively and (3) representative of aged ambient aerosol in the low NOx regime. Firstly, MTA are reliable tracers of isoprene aerosol because they have been identified in numerous chamber experiments involving isoprene conducted under a wide range of conditions and are absent in the oxidation of mono- and sesquiterpenes. They are also present in numerous samples of ambient aerosol collected during the past 20 years at several locations in the U.S. and Europe. Furthermore, MTA concentrations measured during a year-long field study in Research Triangle Park (RTP), NC in 2003 show a seasonal trend consistent with isoprene emissions and photochemical activity. Secondly, an analysis of chemical ionization mass spectrometer (CIMS) data of several chamber experiments in low and high NOx environments show that highly oxidized molecules (HOMs) derived from isoprene that lead to MTAs may be produced rapidly and considered as early generation isoprene oxidation products in the gas phase. Density functional theory calculations show that rapid intramolecular H shifts involving peroxy and alkoxy radicals possess low barriers for methyl-hydroxy-butenals (MHBs) that may represent precursors for MTA. From these results, a viable rapid H shift mechanism is proposed to occur that produces isoprene derived HOMs like MTA. Finally, an analysis of the mechanism shows that autoxidation-like pathways in low and high NOx may produce HOMs in a few OH oxidation steps like commonly detected methyl tetrol (MT) isoprene tracers. The ratio of MTA/MT in isoprene aerosol is also shown to be significantly greater in field versus chamber samples indicating the importance of such pathways in the atmosphere even for smaller hydrocarbons like isoprene.

Low Temperature Thermal Treatment of Gas-Phase Fluorotelomer Alcohols by Calcium Oxide.

Given the extent to which per- and polyfluoroalkyl substances (PFAS) are used in commercial and industrial applications, the need to evaluate treatment options that reduce environmental emissions and human and ecological exposures of PFAS is becoming more necessary. One specific chemical class of PFAS, fluorotelomer alcohols (FTOHs), have vapor pressures such that a significant fraction is expected to be present in the gas-phase even at ambient temperatures. FTOHs are used in a variety of PFAS applications, including synthesis and material coatings. Using two complementary mass spectrometric methods, the use of calcium oxide (CaO) was examined as a low temperature and potentially low-cost thermal treatment media for removal and destruction of four gas-phase FTOHs of varying molecular weights. This was accomplished by assessing the removal/destruction efficiency of the FTOHs and the formation of fluorinated byproducts as a function of treatment temperature (200 - 800 °C) in the presence of CaO compared to thermal-only destruction. During the treatment process, there is evidence that other PFAS compounds are produced at low temperatures (200 - 600 °C) as the primary FTOH partially degrades. At temperatures above 600 °C, thermal treatment with CaO prevented the formation or removed nearly all these secondary products.

Gas-Phase Detection of Fluorotelomer Alcohols and Other Oxygenated Per- and Polyfluoroalkyl Substances by Chemical Ionization Mass Spectrometry.

Per- and polyfluoroalkyl substances (PFAS) are incorporated into an ever-increasing number of modern products and inevitably enter the environment and ultimately human bodies. Herein, we show that chemical ionization mass spectrometry with iodide reagent ion chemistry is a useful technique for the detection of fluorotelomer alcohols (FTOHs) and other oxygenated PFAS, including per- and polyfluoro carboxylic acids such as hexafluoropropylene oxide dimer acid. This technique offers direct, high-time resolution measurement capability with parts per trillion by volume (nanograms per cubic meter) gas-phase detection limits. Measurements were taken by direct volatilization of samples without prior processing, allowing for fast measurements and reduced sample treatment compared to established PFAS methods. We demonstrate the utility of this technique by sampling volatile and semivolatile PFAS from fluoro additives and fluoro products to quantify levels of FTOHs and identify additional fluorinated compounds for which standards were unavailable.

Trends in the oxidation and relative volatility of chamber-generated secondary organic aerosol.

The relationship between the oxidation state and relative volatility of secondary organic aerosol (SOA) from the oxidation of a wide range of hydrocarbons is investigated using a fast-stepping, scanning thermodenuder interfaced with a high-resolution time-of-flight aerosol mass spectrometer (AMS). SOA oxidation state varied widely across the investigated range of parent hydrocarbons but was relatively stable for replicate experiments using a single hydrocarbon precursor. On average, unit mass resolution indicators of SOA oxidation (e.g., AMS f 43 and f 44) are consistent with previously reported values. Linear regression of H:C vs. O:C obtained from parameterization of f 43 and f 44 and elemental analysis of high-resolution spectra in Van Krevelen space both yield a slope of ~-0.5 across different SOA types. A similar slope was obtained for a distinct subset of toluene/NO x reactions in which the integrated oxidant exposure was varied to alter oxidation. The relative volatility of different SOA types displays similar variability and is strongly correlated with SOA oxidation state ( OS - ). On average, relatively low oxidation and volatility were observed for aliphatic alkene (including terpenes) and n-alkane SOA while the opposite is true for mono- and polycyclic aromatic hydrocarbon SOA. Effective enthalpy for total chamber aerosol obtained from volatility differential mobility analysis is also highly correlated with OS - c indicating a primary role for oxidation levels in determining the volatility of chamber SOA. Effective enthalpies for chamber SOA are substantially lower than those of neat organic standards but are on the order of those obtained for partially oligomerized glyoxal and methyl glyoxal.

Spectral and thermodynamic properties of Ag(I), Au(III), Cd(II), Co(II), Fe(III), Hg(II), Mn(II), Ni(II), Pb(II), U(IV), and Zn(II) binding by methanobactin from Methylosinus trichosporium OB3b.

Methanobactin (mb) is a novel chromopeptide that appears to function as the extracellular component of a copper acquisition system in methanotrophic bacteria. To examine this potential physiological role, and to distinguish it from iron binding siderophores, the spectral (UV-visible absorption, circular dichroism, fluorescence, and X-ray photoelectron) and thermodynamic properties of metal binding by mb were examined. In the absence of Cu(II) or Cu(I), mb will bind Ag(I), Au(III), Co(II), Cd(II), Fe(III), Hg(II), Mn(II), Ni(II), Pb(II), U(VI), or Zn(II), but not Ba(II), Ca(II), La(II), Mg(II), and Sr(II). The results suggest metals such as Ag(I), Au(III), Hg(II), Pb(II) and possibly U(VI) are bound by a mechanism similar to Cu, whereas the coordination of Co(II), Cd(II), Fe(III), Mn(II), Ni(II) and Zn(II) by mb differs from Cu(II). Consistent with its role as a copper-binding compound or chalkophore, the binding constants of all the metals examined were less than those observed with Cu(II) and copper displaced other metals except Ag(I) and Au(III) bound to mb. However, the binding of different metals by mb suggests that methanotrophic activity also may play a role in either the solubilization or immobilization of many metals in situ.

Evaluation of the Schirmer tear test in clinically normal rabbits.

Mean (+/- SD) value for results of the Schirmer tear test without use of topical anesthesia on 142 rabbit eyes was 5.30 (+/- 2.96) mm/min; range was 15 mm/min, with low value of 0 and high value of 15 mm/min. Two SD from the mean provided a normal clinical range of 0 to 11.2 mm/min for inclusion of 95% of the population. Significant differences were not evident between eye (right vs left) or gender or among breeds; interaction among eye, gender, and breed also was not observed. Although mean values for 2 breeds were significantly different from values in the other 10 breeds and from each other, they were still within the proposed normal range of 2 SD. The Schirmer tear test without topical anesthesia may be useful in rabbits for evaluation of increased values correlated with ocular irritation, rather than for determination of decreased values associated with keratoconjunctivitis sicca.

Hyperthyroidism in the cat: ten cases.

In ten neutered crossbred cats 10 to 14 years old and of both sexes, hyperthyroidism was evidenced by hyperactivity, weight loss despite increased appetite, frequent defecation with bulky stools, thirst, polyuria, moderately elevated temperature, increased heart rate and size, sometimes with murmurs and arrhythmias, and palpable enlargement of one or both thyroid lobes. The diagnosis of hyperthyroidism was confirmed on the basis of high serum concentrations of thyroxine (T4) and triiodothyronine (T3). In seven cats (6 treated by total thyroidectomy, 1 studied at necropsy), both thyroid lobes were variably enlarged, mottled, cystic, or nodular; in three cats, only one lobe required removal. Adenomatous goiter was diagnosed microscopically in all. In two, there also were foci of adenocarcinoma and in two others, foci suggestive of adenocarcinoma. Three of the nine cats having surgery were treated preoperatively to stabilize cardiac function. Most cats recovered from surgery rapidly and without complications but although every effort was made to spare at least one parathyroid gland in cats having bilateral thyroidectomies, two cats had transient signs of hypoparathyroidism, requiring careful monitoring of serum electrolytes and treatment with calcium and vitamin D2. All having bilateral thyroidectomies were subsequently maintained on treatment with l-thyroxine or, in one case, liothyronine (triiodothyronine).