Urchin-like CoP3/Cu3P heterostructured nanorods supported on a 3D porous copper foam for high-performance non-enzymatic electrochemical dopamine sensors.

In this study, we developed a high-performance non-enzymatic electrochemical sensor based on urchin-like CoP3/Cu3P heterostructured nanorods supported on a three-dimensional porous copper foam, namely, CoP3/Cu3P NRs/CF, for the detection of dopamine. Benefiting from the promising intrinsic catalytic activities of CoP3 and Cu3P, urchin-like microsphere structures, and a large electrochemically active surface area for exposing numerous accessible catalytic active sites, the proposed CoP3/Cu3P NRs/CF shows extraordinary electrochemical response towards the electrocatalytic oxidation of dopamine. As a result, the CoP3/Cu3P NRs/CF sensing electrode has a broad detection window (from 0.2 to 2000 µM), low detection limit (0.51 µM), high electrochemical sensitivity (0.0105 mA µM-1 cm-2), excellent selectivity towards dopamine in the coexistence of some interfering species, and good stability for dopamine determination. More importantly, the CoP3/Cu3P NRs/CF catalyst also exhibits excellent catalytic activity, sensitivity, and selectivity for dopamine detection under simulated human body conditions at a physiological pH of 7.25 (0.1 M PBS) at 36.6 °C.

P-incorporated CuO/Cu2S heteronanorods as efficient electrocatalysts for the glucose oxidation reaction toward highly sensitive and selective glucose sensing.

Currently, tremendous efforts have been made to explore efficient glucose oxidation electrocatalysts for enzymeless glucose sensors to meet the urgent demands for accurate and fast detection of glucose in the fields of health care and environmental monitoring. In this work, an advanced nanostructured material based on the well-aligned CuO/Cu2S heteronanorods incorporated with P atoms is successfully synthesized on a copper substrate. The as-synthesized material shows high catalytic behavior accompanied by outstanding electrical conductivity. This, combined with the unique morphology of unstacked nanorod arrays, which endow the entire material with a greater number of exposed active sites, make the proposed material act as a highly efficient electrocatalyst for the glucose oxidation reaction. Density functional theory calculations demonstrate that P doping endows P-doped CuO/Cu2S with excellent electrical conductivity and glucose adsorption capability, significantly improving its catalytic performance. As a result, a non-enzymatic glucose sensor fabricated based on our proposed material exhibits a broad linear detection range (0.02-8.2 mM) and a low detection limit (0.95 µM) with a high sensitivity of 2.68 mA mM-1 cm-2 and excellent selectivity.

Ultrafast-Laser Micro-Structuring of LiNi0.8Mn0.1Co0.1O2 Cathode for High-Rate Capability of Three-Dimensional Li-ion Batteries.

Femtosecond ultrafast-laser micro-patterning was employed to prepare a three-dimensional (3D) structure for the tape-casting Ni-rich LiNi0.8Mn0.1Co0.1O2 (NMC811) cathode. The influences of laser structuring on the electrochemical performance of NMC811 were investigated. The 3D-NMC811 cathode retained capacities of 77.8% at 2 C of initial capacity at 0.1 C, which was thrice that of 2D-NMC811 with an initial capacity of 27.8%. Cyclic voltammetry (CV) and impedance spectroscopy demonstrated that the 3D electrode improved the Li+ ion transportation at the electrode-electrolyte interface, resulting in a higher rate capability. The diffusivity coefficient DLi+, calculated by both CV and electrochemical impedance spectroscopy, revealed that 3D-NMC811 delivered faster Li+ ion transportation with higher DLi+ than that of 2D-NMC811. The laser ablation of the active material also led to a lower charge-transfer resistance, which represented lower polarization and improved Li+ ion diffusivity.

Plasma-Assisted Surface Modification on the Electrode Interface for Flexible Fiber-Shaped Zn-Polyaniline Batteries.

A novel flexible fiber-shaped zinc-polyaniline battery (FZPB) is proposed to enhance the electrochemical performance, mass loading, and stability of polyaniline cathodes. To this end, electron-cyclotron-resonance oxygen plasma-modified carbon fibers are employed. During plasma treatment, on the carbon-fiber surface, O2+ plasma breaks the C-C, C-H, and C-N bonds to form C radicals, while the O2 molecules are broken down to reactive oxygen species (O+, O2+, O2+, and O22+). The C radicals and the reactive oxygen species are combined to homogeneously form oxygen functional groups, such as -OH, -COOH, and -C═O. The surface area and total pore volume of the treated carbon fibers increase as the plasma attacks. During electrodeposition, aniline interacts with the oxygen functional groups to form N-O and N-H bonds and π-π stacking, resulting in a homogeneous and high-loading polyaniline structure and improved adhesion between polyaniline and carbon fibers. In an FZPB, the cathode with plasma-treated carbon fibers and a polyaniline loading of 0.158 mg mgCF-1 (i.e., 2.36 mg cmCF-1) exhibits a capacity retention of 95.39% after 200 cycles at 100 mA g-1 and a discharge capacity of 83.96 mA h g-1 at such a high current density of 2000 mA g-1, which are ∼1.67 and 1.24 times those of the pristine carbon-fiber-based one, respectively. Furthermore, the FZPB exhibits high flexibility with a capacity retention of 86.4% after bending to a radius of 2.5 mm for 100 cycles as a wearable energy device.

Self-Relaxant Superelastic Matrix Derived from C60 Incorporated Sn Nanoparticles for Ultra-High-Performance Li-Ion Batteries.

Homogeneously dispersed Sn nanoparticles approximately ⩽10 nm in a polymerized C60 (PC60) matrix, employed as the anode of a Li-ion battery, are prepared using plasma-assisted thermal evaporation coupled by chemical vapor deposition. The self-relaxant superelastic characteristics of the PC60 possess the ability to absorb the stress-strain generated by the Sn nanoparticles and can thus alleviate the problem of their extreme volume changes. Meanwhile, well-dispersed dot-like Sn nanoparticles, which are surrounded by a thin SnO2 layer, have suitable interparticle spacing and multilayer structures for alleviating the aggregation of Sn nanoparticles during repeated cycles. The Ohmic characteristic and the built-in electric field formed in the interparticle junction play important roles in enhancing the diffusion and transport rate of Li ions. SPC-50, a Sn-PC60 anode consisting of 50 wt % Sn and 50 wt % PC60, as confirmed by energy-dispersive X-ray spectroscopy analysis, exhibited the highest electrochemical performance. The resulting SPC-50 anode, in a half-cell configuration, exhibited an excellent capacity retention of 97.18%, even after 5000 cycles at a current density of 1000 mA g-1 with a discharge capacity of 834.25 mAh g-1. In addition, the rate-capability performance of this SPC-50 half-cell exhibited a discharge capacity of 544.33 mAh g-1 at a high current density of 10 000 mA g-1, even after the current density was increased 100-fold. Moreover, a very high discharge capacity of 1040.09 mAh g-1 was achieved with a capacity retention of 98.67% after 50 cycles at a current density of 100 mA g-1. Futhermore, a SPC-50 full-cell containing the LiCoO2 cathode exhibited a discharge capacity of 801.04 mAh g-1 and an areal capacity of 1.57 mAh cm-2 with a capacity retention of 95.27% after 350 cycles at a current density of 1000 mA g-1.