RESUMO
We report the demonstration of a germanium waveguide p-i-n photodetector (PD) for the C + L band light detection. Tensile strain is transferred into the germanium layer using a SiN stressor on top surface of the germanium. The simulation and experimental results show that the trenches must be formed around the device, so that the strain can be transferred effectively. The device exhibits an almost flat responsivity with respect to the wavelength range from 1510 nm to 1630 nm, and high responsivity of over 1.1 A/W is achieved at 1625 nm. The frequency response measurement reveals that a high 3 dB bandwidth (f3dB) of over 50 GHz can be obtained. The realization of the photonic-integrated circuits (PIC)-integrable waveguide Ge PDs paves the way for future telecom applications in the C + L band.
RESUMO
Development of the waveguide grating antenna with high directionality is significantly important for the optical phased array. A Si3N4/Si dual-layer structure with the grating pattern on the Si3N4 layer is proposed to improve the directionality of the waveguide grating antenna. High directionality of more than 89% can be achieved, and the length of the waveguide grating antenna is longer than 4 mm.
RESUMO
In this paper, a novel, to the best of our knowledge, polarization beam splitter (PBS) based on an asymmetrical directional coupler (DC) was proposed, which consists of a strip waveguide (WG) and a ${{\rm Si}_3}{{\rm N}_4}$Si3N4 loaded horizontal slot WG. By carefully adjusting the geometric parameters of the DC, the phase match condition between these two WGs can be satisfied for the transverse magnetic (TM) polarization, while the coupling efficiency of the transverse electric (TE) polarization is frustrated due to the large phase mismatch. The extra optimizing designs include adding filters to the output ports as well as introducing the tapered structure into the DC, which is settled by the particle swarm optimizing (PSO) algorithm so that the performance of the proposed PBS is improved over a broadband range. Numerical simulations show that the bandwidths for the extinction ratio (ER) $ \gt {20}\;{\rm dB}$>20dB, 30 dB, and 40 dB are 160 nm, 95 nm, and 50 nm, respectively, with insertion loss (IL) $ \lt {1}\;{\rm dB}$<1dB for the wavelength of 1.49-1.58 µm. The analysis of the deviations demonstrates that the proposed PBS allows high fabrication tolerances.