RESUMO
AIM: This study investigated the effectiveness of a drug-modified tissue conditioner in an animal model of denture stomatitis. METHODS AND RESULTS: Wistar rats wore a Candida albicans-contaminated palatal device for 4 days. Next, nystatin (Nys) or chlorhexidine (Chx) were added to a tissue conditioner in their raw or ß-cyclodextrin-complexed (ßCD) forms at their minimum inhibitory concentrations. As controls, one group was not subjected to any procedure (NC), one group used sterile devices, one group had denture stomatitis but was not treated (DS), and another had the devices relined with the tissue conditioner without the addition of any drug (Soft). After 4 days of treatment, treatment effectiveness was assessed visually, histologically, and through CFU count, and myeloperoxidase (MPO) and N-acetylglucosaminidase (NAG) assays. Rats from the Soft, Nys, Nys:ßCD, and Chx groups presented a significant decrease in the microbial load compared with the untreated group. Treatment groups showed lower MPO and NAG activity compared to the non-treated group. CONCLUSIONS: The addition of antifungals to a soft tissue conditioner can be a promising approach for denture stomatitis treatment.
Assuntos
Antifúngicos , Candida albicans , Clorexidina , Nistatina , Ratos Wistar , Estomatite sob Prótese , Animais , Estomatite sob Prótese/microbiologia , Estomatite sob Prótese/tratamento farmacológico , Ratos , Antifúngicos/uso terapêutico , Antifúngicos/farmacologia , Nistatina/farmacologia , Nistatina/uso terapêutico , Clorexidina/farmacologia , Candida albicans/efeitos dos fármacos , Modelos Animais de Doenças , Masculino , Contagem de Colônia Microbiana , Testes de Sensibilidade Microbiana , Candidíase Bucal/tratamento farmacológico , Candidíase Bucal/microbiologia , Peroxidase/metabolismo , Acetilglucosaminidase/metabolismo , beta-CiclodextrinasRESUMO
OBJECTIVES: This systematic review and meta-analysis aimed to evaluate the clinical and mycological effectiveness of mucoadhesives as vehicles for drugs or natural products in the treatment of oral candidiasis. MATERIALS AND METHODS: The search for articles was carried out in the Medline/PubMed, SCOPUS, EMBASE, Web of Science, Cochrane Library, and SciELO databases before August 2023. We selected the studies, extracted the data, evaluated the study quality, graded the evidence, performed the risk of bias, and carried out meta-analysis. RESULTS: A total of 389 potentially relevant articles were identified, and 11 studies (1869 participants) met the inclusion criteria of the systematic review. The overall risk of bias was considered low. The most common presentation of mucoadhesives was tablets, with miconazole being the most frequently drug used in the delivery system. Mucoadhesives demonstrated comparable efficacy with topical or systemic antifungal agents, with no significant differences between treatments in terms of clinical (RR = 0.907; 95CI = 0.3-1.297; p = 0.591; I2 = 64.648) or mycological (RR = 0.95; 95CI = 0.667-1.360; p = 0.789; I2 = 73.271) efficacy. CONCLUSIONS: Mucoadhesives may be a suitable alternative to conventional treatments, with the advantage of reducing the frequency of application by up to 5 times and the daily dosage by up to 20 times.
Assuntos
Antifúngicos , Candidíase Bucal , Sistemas de Liberação de Medicamentos , Candidíase Bucal/tratamento farmacológico , Humanos , Antifúngicos/administração & dosagem , Antifúngicos/uso terapêutico , Miconazol/administração & dosagem , Miconazol/uso terapêutico , Adesivos , Comprimidos , Mucosa Bucal/microbiologiaRESUMO
The emergence of resistant fungal species and the toxicity of currently available antifungal drugs are relevant issues that require special consideration. Cyclodextrins inclusion complexes could optimize the antimicrobial activity of such drugs and create a controlled release system with few side effects. This study aimed to assess the in vitro toxicity and antifungal effectiveness of nystatin (Nys) and chlorhexidine (Chx) complexed or not with ß-cyclodextrin (ßCD). First, a drug toxicity screening was performed through the Artemia salina bioassay. Then, the minimum inhibitory concentrations (MICs) against Candida albicans were determined with the broth microdilution test. After MICs determination, the cytotoxicity of the drugs was evaluated through the methyl-thiazolyl-tetrazolium (MTT) and neutral red (NR) assays and through cell morphology analysis. The PROBIT analysis was used to determine the median lethal concentration (LC50), and the cell viability values were submitted to one-way analysis of variance(ANOVA)/Tukey (α = 0.05). Overall, the ßCD-complexed antifungals were less toxic against A. salina than their raw forms, suggesting that inclusion complexes can reduce the toxicity of drugs. The MICs obtained were as follows: Nys 0.5 mg/L; Nys:ßCD 4 mg/L; Chx 4 mg/L; and Chx:ßCD 8 mg/L. Chx showed significant cytotoxicity (MTT: 12.9 ± 9.6%; NR: 10.6 ± 12.5%) and promoted important morphological changes. Cells exposed to the other drugs showed viability above 70% with no cellular damage. These results suggest that antifungals complexed with ßCD might be a biocompatible option for the treatment of Candida-related infections.
Assuntos
Antifúngicos , beta-Ciclodextrinas , Antifúngicos/toxicidade , Candida , Nistatina/toxicidade , Candida albicans , Clorexidina/farmacologia , beta-Ciclodextrinas/toxicidadeRESUMO
This study compared different conditions to establish a rat model of denture stomatitis. Immunocompetent Wistar rats were divided into two groups (n = 35): Tetracycline = administration of 0.83 mg/ml of tetracycline hydrochloride 7 days before induction of denture stomatitis and amoxicillin = administration of 0.156 mg/ml of amoxicillin with clavulanic acid 4 days before induction of denture stomatitis. A suspension of Candida albicans was inoculated on the palate followed by the use of a palatal device contaminated with C. albicans inoculum for 4 days to induce denture stomatitis. As controls, some rats were not submitted to any procedure or used a sterile palatal device for 4 days. The development of denture stomatitis was confirmed by visual analysis, colony-forming units per milliliter (CFU/ml) count, histopathological and immunohistochemical analyses, and through myeloperoxidase (MPO) and N-acetylglucosaminidase (NAG) assays. Rats were euthanized right after device removal (T0), 4 (T4), or 6 (T6) days after device removal. Tetracycline improved the development of the disease, with more severe clinical signs at T0. Similar results were observed in the CFU/ml count and in the histometric and immunohistochemical analyses. Higher MPO expression was detected in the palates of the tetracycline group (P = .006). Despite the subtle differences between antibiotics, tetracycline showed better results in inducing and maintaining denture stomatitis for at least 4 days after device removal.
Denture stomatitis is an oral inflammatory disease with high recurrence rates. Different animal models have been reported in the literature, but some gaps still need to be addressed. A reproducible in vivo model should be established to test new treatment approaches.
Assuntos
Candidíase Bucal , Doenças dos Roedores , Estomatite sob Prótese , Ratos , Animais , Estomatite sob Prótese/patologia , Estomatite sob Prótese/veterinária , Antibacterianos , Ratos Wistar , Candida albicans , Amoxicilina , Tetraciclinas , Candidíase Bucal/veterináriaRESUMO
A technique is described for detecting areas of interference for removable partial denture frameworks. An occlusal marking film is placed between the misfitted abutment teeth and framework region. Gentle pressure is applied to seat the framework, and the exact areas of interference are seen on removal. With this clean, rapid, cost-effective, and straightforward approach, areas of interference can be precisely adjusted for complete seating of the removable partial denture framework.
Assuntos
Prótese Parcial Removível , Dente SuporteRESUMO
The aim was to discuss the indications, contraindications, advantages, and disadvantages of Nonmetal clasp dentures (NMCDs), as well as the most relevant properties of its constituent materials. A search was conducted using the keywords: "nonmetal clasp dentures," "thermoplastic resin," "flexible resin removable partial denture," "polyamide," and "nylon" in databases PubMed/Medline, Lilacs, SciELO, and textbooks between 1955 and 2020. Theses and texts without reliable sources of publication were excluded. Once the analysis instruments were determined, the data were analyzed and discussed. NMCDs present high flexibility, easy adaptation to the abutments, color compatibility and biocompatibility with the oral mucosa, and absence of visible metal clasps. However, they need laboratory relining, grinding, and polishing, do not have criteria for its planning, become rougher and stained over time, and are able to traumatize supporting tissues. The association with metal components seems to be an alternative to increase the success of NMCDs by combining esthetics and biomechanical principles of conventional removable partial dentures. The lack of long-term clinical studies makes the professionals to rely solely on previous experiences or on the manufacturers' recommendations. It suggested that NMCDs must be indicated with caution when not used temporarily.
RESUMO
STATEMENT OF PROBLEM: Antifungal agents incorporated into interim denture resilient liners have been suggested as an adjunct treatment for denture stomatitis (DS). However, before applying this protocol to humans, biocompatibility analysis of such drugs in animal models is required. PURPOSE: The purpose of this animal study was to evaluate the in vivo biocompatibility of an interim resilient liner modified with minimum inhibitory concentrations (MICs) of antifungal drugs for Candida albicans biofilm. MATERIAL AND METHODS: Sixty Wistar rats were divided into 6 groups (n=5): PC=positive control/no protocol; IOD (intraoral device)=rats using an acrylic resin palatal device (PD); Tru=rats using a PD relined with Trusoft; and Ny (nystatin), Chx (chlorhexidine diacetate), and Ke (ketoconazole) groups=rats using a PD relined with Trusoft + drug MICs. The rats were sacrificed at 7 or 14 days of trial. Histopathological qualitative analysis was performed by comparing photomicrographs of histological sections of the intermolar region. Morphological changes in the epithelium and keratin were quantitatively analyzed by computerized planimetry, and data were analyzed by using 2-way ANOVA and the Tukey HSD test (α=.05). RESULTS: Quantitative analysis showed that only PD containing Ke significantly decreased the thickness and area of the keratin compared with the other groups (P<.001), which showed no differences between each other (P>.05). These results agreed with those of qualitative analysis. CONCLUSIONS: Incorporation of MICs of Ny and Chx in Trusoft did not induce histopathological changes in the rat palatal mucosa, suggesting the in vivo biocompatibility of this DS treatment.
Assuntos
Antifúngicos/administração & dosagem , Candida albicans/efeitos dos fármacos , Reembasadores de Dentadura , Mucosa Bucal/efeitos dos fármacos , Resinas Acrílicas , Análise de Variância , Animais , Biofilmes/efeitos dos fármacos , Clorexidina/administração & dosagem , Queratinas/efeitos dos fármacos , Cetoconazol/administração & dosagem , Teste de Materiais , Testes de Sensibilidade Microbiana , Mucosa Bucal/citologia , Nistatina/administração & dosagem , Ratos , Ratos WistarRESUMO
STATEMENT OF PROBLEM: Specifications for determining acceptable limits of water sorption (WS) and solubility for interim denture resilient liners are lacking. PURPOSE: The purpose of this in vitro study was to evaluate the WS and solubility of interim resilient materials throughout their lifespans. MATERIAL AND METHODS: Specimens (n=10) of 7 tissue conditioners, Coe-Comfort (CC), Softone (ST), Rite-Line (RL), Dura Conditioner (DC), Hydrocast (HC), Dentusoft (DS), and Visco-gel (VG) and 2 interim resilient liners, Trusoft (TS) and Coe-Soft (CS), were submitted to desorption until weight stabilization. Next, they were immersed in distilled water at 37°C for 3, 5, 7, or 14 days and then weighed, dried, and reweighed. Data (%) were analyzed using 2-way ANOVA and the Tukey honestly significant difference (HSD) test (α=.05). RESULTS: VG demonstrated the highest WS (12.06 ±0.93%-16.62 ±0.87%) and solubility (20.30 ±4.26%-23.59 ±2.24%; P<.05) percentages. Low WS values were presented by CC (2.23 ±0.53%-2.99 ±0.49%; P<.05). The WS showed no significant changes for CC, CS, and TS over 14 days (P>.05). SL presented intermediate solubility values (4.09 ±1.60%-8.80 ±1.15%), and the other materials showed values lower than 3.35 ±0.70%. CC, DC, DS, HC, RL, TS, and CS showed no changes in solubility throughout the 14-day trial. CONCLUSIONS: Over the lifespan of a tissue conditioner (7 days), CC, RL, DC, HC, DS, CS, and TS presented suitable in vitro performance. Among the tested materials, CC, CS, and TS were considered best suited for denture relining for up to 14 days.
Assuntos
Reembasadores de Dentadura , Água/química , Absorção Fisico-Química , Técnicas In Vitro , Teste de Materiais , Solubilidade , Propriedades de SuperfícieRESUMO
PURPOSE: To investigate the ultimate tensile strength of temporary soft denture liners modified by minimum inhibitory concentrations (MICs) of antifungal agents for Candida albicans biofilm (SC5314) determined in previous microbiological research. MATERIALS AND METHODS: Dumbbell-shaped specimens (n = 7) with a central cross-sectional area of 6 × 3 × 33 mm were produced by Softone and Trusoft, without (control) or with incorporation of drugs in powder form at MICs for C. albicans biofilm (per g of material powder): nystatin (0.032 g), chlorhexidine diacetate (0.064 g), ketoconazole (0.128 g), miconazole (0.256 g), and itraconazole (0.256 g). After plasticization, specimens were immersed in distilled water at 37°C for 24 hours, 7 or 14 days, and then tested in tension in a universal testing machine at 40 mm/min. Data of tensile strength (MPa) and elongation percentage (%) were submitted to 3-way ANOVA and Tukey's test (α = 0.05). RESULTS: At the end of 14 days, the tensile strength for both materials was significantly lower in the groups modified by miconazole and itraconazole compared to the other groups (p < 0.0001), which showed no significant difference between them (p > 0.05). After 7 and 14 days in water, miconazole and itraconazole added into both materials resulted in significantly lower elongation percentages compared to the other antifungal agents and control (p < 0.0001), which were similar to each other (p > 0.05). CONCLUSIONS: The addition of the nystatin, chlorhexidine, and ketoconazole at MICs for C. albicans biofilm resulted in no harmful effects on the tensile strength and elongation percentage of the temporary soft denture liner materials up to 14 days.
Assuntos
Antifúngicos/efeitos adversos , Reembasadores de Dentadura , Antifúngicos/administração & dosagem , Antifúngicos/farmacologia , Biofilmes/efeitos dos fármacos , Candida albicans/efeitos dos fármacos , Clorexidina/administração & dosagem , Clorexidina/efeitos adversos , Clorexidina/farmacologia , Humanos , Itraconazol/administração & dosagem , Itraconazol/efeitos adversos , Itraconazol/farmacologia , Cetoconazol/administração & dosagem , Cetoconazol/efeitos adversos , Cetoconazol/farmacologia , Miconazol/administração & dosagem , Miconazol/efeitos adversos , Miconazol/farmacologia , Testes de Sensibilidade Microbiana , Nistatina/administração & dosagem , Nistatina/efeitos adversos , Nistatina/farmacologia , Resistência à Tração/efeitos dos fármacosRESUMO
BACKGROUND: Detachment of denture acrylic resin artificial teeth from denture base resin is one of the most common problems presented by denture wearers. PURPOSE: This study investigated the shear bond strength (SBS) and fracture type of bonding interface of two commercial acrylic teeth (Vipi Dent Plus e Biolux) to two denture base resins (Vipi Cril e Lucitone 550) after immersion in potentially chromogenic beverages (coffee, cola soft drink, and red wine) or control solution (distilled water). MATERIALS AND METHODS: Maxillary central incisor acrylic teeth were placed at 45° to denture base resin and submitted to short polymerization cycle according to manufacturers. Specimens were divided according to the combination tooth/resin/solution (n = 8) and submitted to bond strength tests in a universal testing machine MTS-810 (0.5 mm/min). Subsequently, fracture area was analyzed by stereomicroscope at a magnification of ×10 and categorized into adhesive, cohesive, or mixed failure. RESULTS: The bond strength of teeth/denture base resins interface was not significantly affected by tested solutions (P > 0.087), except for Biolux teeth immersed in coffee (P < 0.01). In all conditions, the Vipi Dent Plus teeth showed higher bond strength to Lucitone and Vipi Cril resins when compared to Biolux teeth (P < 0.003). All specimens' failure modes were cohesive. CONCLUSIONS: The SBS of acrylic teeth to denture base resins was not generally influenced by immersion in the tested staining beverages.
RESUMO
AIM: To evaluate the effect of successive cycles of disinfection in different denture cleansers on the surface roughness and the Vickers hardness of two layers of acrylic resin (base-BL and enamel-EL) of two commercial cross-linked artificial teeth. MATERIALS AND METHODS: The occlusal surfaces of 60 acrylic resin denture posterior teeth (Trilux-TLX and SR Orthosit PE-SRO) embedded in autopolymerizing acrylic resin were ground fat with 1200-grit silicon carbide paper. Specimens were stored in distilled water at 37°C and then submitted to the microhardness (VHN) and roughness (µm) tests. Specimens were stored in distilled water at 37°C for 90 days and submitted to 720 disinfection cycles in sodium hypochlorite at 0.5%, 30% vinegar solution or distilled water (control). Afterward, micro-hardness and roughness tests were again performed. Data were analyzed using two-way ANOVA and Tukey's test (α=0.05). RESULTS: Hypochlorite immersion decreased the hardness of BL and EL of SRO teeth, with an average reduction of 10.11% (p<0.008). TLX teeth demonstrated a hardness reduction of 28.96% of both layers for all solutions including water (p<0.0000). The roughness of both teeth was not affected by denture cleansers (p>0.37). CONCLUSION: Hypochlorite promoted deleterious effects on the hardness of both layers of the artificial teeth tested. Immersion in vinegar and water also resulted in reduction of hardness of TLX teeth. CLINICAL SIGNIFICANCE: The surface hardness of the different layers of cross-linked artificial teeth can be altered by daily disinfection in denture cleansers commonly indicated for removable dentures.
Assuntos
Resinas Acrílicas/química , Resinas Compostas/química , Materiais Dentários/química , Higienizadores de Dentadura/química , Desinfecção/métodos , Dente Artificial , Ácido Acético/química , Compostos Inorgânicos de Carbono/química , Dureza , Humanos , Teste de Materiais , Metacrilatos/química , Polimetil Metacrilato/química , Poliuretanos/química , Compostos de Silício/química , Hipoclorito de Sódio/química , Propriedades de Superfície , Temperatura , Fatores de Tempo , Água/químicaRESUMO
PURPOSE: The aim of this in vivo animal study was to investigate changes in the surface roughness of soft liners over time. MATERIALS AND METHODS: Forty adult Wistar rats (Rattus norvergicus albinus) were fitted with acrylic custom-made palatal plates relined by dynamic impressions and tested with the following soft liners: Dentuflex (DF), Trusoft (TS), Dentusoft (DS), and Ufi Gel P (UG). Half of the animals for each tested material had the plates fitted during the material reline procedure. Their surface roughness was read immediately (IRa group, n = 5). The other half used the palatal plates for 14 days before roughness readings were performed (FRa group, n = 5). The surface roughness (Ra) of the inner surface from the relined dentures was recorded using a Surftest SJ-401 with eight readings per specimen, and mean values were obtained. Data (µm) were analyzed by two-way ANOVA and Tukey's test (α = 0.05). RESULTS: IRa means (2.92 ± 0.87 µm) and FRa means (3.35 ± 0.65 µm) were significantly different (p = 0.016). UG showed a lower (p = 0.01) Ra mean (2.1 ± 0.52 µm) than DF (3.94 ± 0.81 µm), TS (4.12 ± 0.64 µm), and DS (3.27 ± 0.64 µm). CONCLUSIONS: Ufi Gel P showed the smoothest surface among the materials evaluated. The period of use resulted in changes in the surface roughness of the materials tested.
Assuntos
Resinas Acrílicas/química , Materiais Dentários/química , Reembasadores de Dentadura , Silicones/química , Animais , Bases de Dentadura , Reembasamento de Dentadura , Feminino , Metacrilatos/química , Metilmetacrilatos/química , Modelos Animais , Ratos , Ratos Wistar , Elastômeros de Silicone/química , Propriedades de Superfície , Fatores de TempoRESUMO
The data presented in this manuscript describe craniofacial landmark coordinate values, muscle and load moment arm lengths, and mechanical advantage rates for constructing a three-dimensional model of masticatory muscles. Cone-beam computed tomography scans from 30 subjects (aged 12-19 years, 16 females) were used. Thirty-six craniofacial landmarks were identified. Subsequently, the moment arms for 7 muscles and their corresponding load moment arms at incisor and molar positions were determined. Then, the three-dimensional mechanical advantage for each muscle and tooth position was calculated as the ratio of muscle moment arm to load moment arm. This procedure was repeated three times by a main examiner and once by two other examiners. The Friedman test and the square root of the 'method of moments' variance estimator were used to compare data among examiners and calculate random errors, respectively. Although the values for the craniofacial landmark coordinates and biomechanical variables are very close, differences were found between measurements, especially in the interexaminer comparisons. Values served as the basis for reliability (intraclass correlation coefficient) and errors (average mean of absolute differences) analysis in the research paper titled "A three-dimensional method to calculate mechanical advantage in mandibular function: Intra- and interexaminer reliability study," published in the Journal of Orofacial Orthopedics.
RESUMO
BACKGROUND: Denture biofilm acts as a potential reservoir for respiratory pathogens, considerably increasing the risk of lung infections, specifically aspiration pneumonia, mainly 48h after hospital admission. The establishment of a straightforward, affordable, and applicable hygiene protocol in a hospital environment for the effective control of denture biofilm can be particularly useful to prevent respiratory infections or reduce the course of established lung disease. OBJECTIVES: To evaluate the anti-biofilm effectiveness of denture cleaning protocols in hospitalized patients. METHODOLOGY: The maxillary complete dentures (MCDs) of 340 hospitalized participants were randomly cleaned once using one of the following 17 protocols (n=20): brushing with distilled water, toothpaste, or neutral liquid soap (controls); immersion in chemical solutions (1% sodium hypochlorite, alkaline peroxide, 0.12% or 2% chlorhexidine digluconate), or microwave irradiation (650 W for 3 min) combined or not with brushing. Before and after the application of the protocols, the biofilm of the intaglio surface of the MCDs was evaluated using two methods: denture biofilm coverage area (%) and microbiological quantitative cultures on blood agar and Sabouraud Dextrose Agar (CFU/mL). Data were subjected to the Wilcoxon and Kruskal-Wallis tests (α=0.05). RESULTS: All 17 protocols significantly reduced the percentage area of denture biofilm and microbial and fungal load (P<0.05). The highest percentage reductions in the area of denture biofilm were observed for 1% hypochlorite solution with or without brushing and for 2% chlorhexidine solution and microwave irradiation only in association with brushing (P<0.05). The greatest reductions in microbial and fungal load were found for the groups that used solutions of 2% chlorhexidine and 1% hypochlorite and microwave irradiation, regardless of the association with brushing (P<0.05). CONCLUSIONS: A single immersion for 10 min in 1% sodium hypochlorite, even in the absence of brushing, proved to be a straightforward, rapid, low-cost, and effective protocol for cleaning the dentures of hospitalized patients.
Assuntos
Clorexidina , Hipoclorito de Sódio , Humanos , Ágar/farmacologia , Biofilmes , Clorexidina/farmacologia , Higienizadores de Dentadura/farmacologia , Prótese Total/microbiologia , Dentaduras/microbiologia , Ácido Hipocloroso/farmacologia , Hipoclorito de Sódio/farmacologiaRESUMO
PURPOSE: Masticatory muscles are physically affected by several skeletal features. The muscle performance depends on muscle size, intrinsic strength, fiber direction, moment arm, and neuromuscular control. To date, for the masticatory apparatus, only a two-dimensional cephalometric method for assessing the mechanical advantage, which is a measure for the ratio of the output force to the input force in a system, is available. This study determined the reliability and errors of a three-dimensional (3D) mechanical advantage calculation for the masticatory system. METHODS: Using cone-beam computed tomography images from teenage patients undergoing orthodontic treatments, 36 craniofacial landmarks were identified, and the moment arms for seven muscles and their load moment arms (biomechanical variables) were determined. The 3D mechanical advantage for each muscle was calculated. This procedure was repeated by three examiners. Reliability was verified using the intraclass correlation coefficient (ICC) and the errors by calculating the absolute differences, variance estimator and coefficient of variation (CV). RESULTS: Landmark coordinates demonstrated excellent intra- and interexaminer reliability (ICC 0.998-1.000; pâ¯< 0.0001). Intraexaminer data showed errors <â¯1.5â¯mm. Unsatisfactory interexaminer errors ranged from 1.51-5.83â¯mm. All biomechanical variables presented excellent intraexaminer reliability (ICC 0.919-1.000, pâ¯< 0.0001; CVâ¯< 7%). Interexaminer results were almost excellent, but with lower values (ICC 0.750-1.000, pâ¯< 0.0001; CVâ¯< 10%). However, the muscle moment arm and 3D mechanical advantage of the lateral pterygoid muscles had ICCsâ¯< 0.500 (pâ¯< 0.05) and CVâ¯< 30%. Intra- and interexaminer errors were ≤â¯0.01 and ≤â¯0.05, respectively. CONCLUSIONS: Both landmarks and biomechanical variables showed high reliability and acceptable errors. The proposed method is viable for the 3D mechanical advantage measure.
Assuntos
Imageamento Tridimensional , Mandíbula , Adolescente , Humanos , Reprodutibilidade dos Testes , Mandíbula/diagnóstico por imagem , Variações Dependentes do Observador , Tomografia Computadorizada de Feixe CônicoRESUMO
Aim: This study aimed to develop, characterize and analyze the antifungal activity of chlorhexidine:ß-cyclodextrin inclusion complexes (Chx:ßCD). Materials & methods: Chx:ßCD were characterized by physicochemical techniques and the susceptibility of nine Candida strains was assessed. The inhibition of Candida albicans biofilm growth was evaluated in a denture material modified with the incorporation of Chx:ßCD. Results: Chx was better complexed in 1:2 molar ratio by freeze-drying. Chx:ßCD presented antifungal activity against all Candida strains. When incorporated into the denture material, Chx:ßCD showed better antifungal activity, as it required about 7.5% of Chx concentration compared with the raw Chx for 14 days. Conclusion: The improved characteristics of Chx:ßCD can result in new formulations to treat oral candidiasis and denture stomatitis.
Many people who wear dentures can get a fungal infection called denture stomatitis. Treating this infection is hard because it often comes back. There are many reasons why it can come back, like not following instructions, taking the wrong amount of medicine or having a bad reaction to the drugs. Using old and poorly fitting dentures and the difficulty to maintain the medicine in the right place can also make it harder to get better. One idea to make treatment easier is to add stronger drugs with fewer side effects to the material used to make dentures. That way, patients would only need to wear dentures with the right amount of medicine for a certain time to treat the infection.
Assuntos
Clorexidina , beta-Ciclodextrinas , Clorexidina/farmacologia , Antifúngicos/farmacologia , Candida albicans , beta-Ciclodextrinas/farmacologia , beta-Ciclodextrinas/químicaRESUMO
BACKGROUND: Nystatin (Nys) is a fungicidal drug commonly prescribed for candidiasis disease in several administration routes. However, Nys is a class IV drug, according to the Biopharmaceutical Classification System, that possesses limited bioavailability and is used for local activity. OBJECTIVE: This study developed and characterized nystatin:ß-cyclodextrin (Nys:ßCD) inclusion complexes and evaluated their activity against Candida spp. METHODS: Complexes were characterized by physicochemical techniques and drug dissolution profiles. The susceptibility of C. albicans, C. krusei, C. parapsilosis, C. glabrata, C. guilliermondii, C. tropicalis, and C. auris was assessed using the broth microdilution method. The applicability of Nys:ßCD inclusion complex was evaluated by incorporating it into a temporary soft material for denture stomatitis treatment. RESULTS: Nys was better complexed in a 1:1 molar ratio by freeze-drying and spray-drying methods. The inclusion complexes show bi-exponential release, an initial burst release followed by a sustained manner, presenting higher dissolution efficiency than raw Nys. The 1:1 freeze-drying Nys:ßCD complex presents antifungal activity against all evaluated Candida strains, showing the maintenance of the drug effectiveness. The inclusion complex incorporated into a tissue conditioner material for denture stomatitis treatment effectively inhibited more than 90% of C. albicans biofilm growth during 7 and 14 days, in a half dose compared to raw Nys. CONCLUSION: This work represents a significant contribution to treating a wide variety of diseases caused by the Candida species, optimizing the drug bioavailability and compliance to the treatment due to improved drug solubility, dissolution, and sustained delivery.
Assuntos
Antifúngicos , Estomatite sob Prótese , Antifúngicos/farmacologia , Nistatina/farmacologia , Candida , Estomatite sob Prótese/tratamento farmacológico , Estomatite sob Prótese/microbiologia , Testes de Sensibilidade Microbiana , Candida albicans , Candida parapsilosisRESUMO
OBJECTIVES: This randomized clinical trial evaluated the effectiveness of an interim denture resilient liner (Trusoft) modified with minimum inhibitory concentrations (MICs) of antimicrobial agents for Candida albicans biofilm in the denture stomatitis (DS) treatment. METHODS: Forty participants with DS and maxillary complete denture (MCD) wearers were randomly assigned to one of the treatments for 14 days (n=10): nystatin oral suspension (Control-100,000IU/mL; 4 × /day), MCD relined with Trusoft either without (Tru) or with nystatin (Ny) or chlorhexidine diacetate (Chx) at MICs. Cytological smears and mycological quantitative cultures were taken from the palate and denture before treatment (baseline), at the end of treatment (day 14), and at follow-up (days 30, 45, and 60). Photographs of the palate were made at each visit. Data were analyzed by the Cochran and χ2 tests, ANOVA and the Tukey test or the Friedman and Kruskal-Wallis tests (α=0.05). RESULTS: Palatal smears of the Ny and Chx groups exhibited no mycelial Candida (0%) on day 14, and, at the 60-day follow-up, it was observed for only 1 participant from Chx group. MCD smears showed reduction in mycelial forms for all groups on day 14 (P<0.05), but this difference was maintained at follow-up only for the relined dentures (P<0.05). Unlike Tru and the control groups, Ny and Chx groups evidenced a significant reduction in CFU/mL values and DS severity throughout the trial (P<0.05). CONCLUSIONS: The addition of nystatin and chlorhexidine at MICs to an interim resilient liner is a promising treatment for DS, with better results than those for conventional therapy with nystatin suspension, including the follow-ups. CLINICAL SIGNIFICANCE: Compared with conventional topical antifungal therapy, modifying a denture reline material with antimicrobials provided a therapeutic option for denture stomatitis. This non-invasive, straightforward therapeutic approach can be easily adopted by dentists and has the advantage of not requiring patient compliance while maintaining therapeutic concentrations on the denture base.
Assuntos
Nistatina , Estomatite sob Prótese , Humanos , Nistatina/uso terapêutico , Nistatina/farmacologia , Antifúngicos , Estomatite sob Prótese/tratamento farmacológico , Estomatite sob Prótese/microbiologia , Clorexidina/uso terapêutico , Candida albicansRESUMO
The effectiveness of denture stomatitis (DS) treatment should be evaluated by associating clinical and mycological parameters. Although widely used in clinical studies, the Newton classification does not accurately represent the degree of severity of palatal inflammation in terms of extent of the lesions and intensity of the erythema. Therefore, a modified Newton classification has been proposed considering the coverage area of palatal inflammation and the erythema level. This consistent and direct ranking will help standardise randomised clinical trials, as well as the statistical comparison among blind evaluations of the obtained scores within and between studies.
Assuntos
Estomatite sob Prótese , Estomatite , Eritema , Humanos , Inflamação , Estomatite/diagnóstico , Estomatite sob Prótese/diagnósticoRESUMO
Aim: This study investigated the effect of denture liners surface modification with Equisetum giganteum (EG) and Punica granatum (PG) on Candida albicans biofilm inhibition supposing its usage as a sustained-release therapeutical delivery system for Candida-associated denture stomatitis. Materials & methods:C. albicans biofilm (SC5314 or ATCC 90028) was formed on soft liners superficially modified by a primer mixed to drugs at minimum inhibitory concentrations (0.100 g for EG and PG or 0.016 g for nystatin per ml of primer). After 24 h, 7 or 14 days, antibiofilm activity was evaluated by colony-forming unit counts. Results: Not all groups were equi-efficient to nystatin after 24 h and 7 days. After 14 days, EG and PG efficacies were not different from nystatin (almost 100% inhibition). Conclusion: The proposed protocol presents a promising option to allopathic drugs for Candida-associated denture stomatitis treatment.