Feasibility Study of Experimental Protocol for the Time-Dependent Mechanical Response of Synthetic Tibia.

In this research, an experimental biomechanics construct was developed to reveal the mechanics of distal tibial fracture by submitting synthetic tibiae to cyclic loading, resulting in a combined stress state due to axial compression and bending loads. The synthetic tibia was fixed at the knee but allowed to rotate in the coronal and sagittal planes at the ankle. The first three loading regimes lasted for 4000 cycles/each, and the final until ultimate failure. After 12k±80 cycles, the observed failure patterns closely resembled distal tibial fractures. The collected data during cyclic loading were fitted into a phenomenological model to deduce the time-dependent response of the synthetic tibiae. Images were also collected and analyzed using digital image correlation to deduce the full-field state of strain. The latter revealed that longitudinal strain contours extended in the proximal-distal direction. The transverse strain contours exemplified a medial-to-lateral distribution, attributed to the combined contributions of the Poisson's effect and the flexural deformation from axial and bending components of the applied load, respectively. The experimental construct, full-field characterization, and data analysis approaches can be extended to elucidate the effect of different fixation devices on the overall mechanical behavior of the bone and validate computational models in future research.

Eye of the Carpenter: How Well do Orthopaedic Surgeons Estimate Angular Measurements in Derotational Osteotomies?

BACKGROUND: Femoral derotational osteotomies are used by orthopaedic surgeons to decrease version in a variety of pathologies. Intraoperatively, the goal of the surgery is to decrease the rotation of the femur to within physiological range. Surgeons generally visually estimate the angle of correction based on bone markers at the rotating cylindrical portion of the femur. This study sought first to assess the accuracy and inter-rater reliability of surgeons with respect to angle creation, and then to implement a training intervention. METHODS: A rotational femur model was constructed and tested among surgeons and nonsurgeons. Surgeons were then randomized into an experimental and control cohort with training on the model as the intervention. Subjects were asked to create target angles of 15, 30, 45, and 60 degrees using only Kirschner wires and then only bone marks for reference. Independent and paired t -tests were performed to determine variability between cohorts. RESULTS: The mean angle creation error and range of the surgeon cohort were significantly lower than those of the nonsurgeon cohort. Within the nonsurgeon cohort, the mean angle creation error and range of the wire modality were significantly lower than that of the mark modality. The mean angle creation error and range of the trained cohort were significantly lower than the untrained cohort. CONCLUSIONS: The considerable inter-subject range within the surgeon cohort highlights a need for the reinforcement of basic geometric principles within orthopaedic instruction. This model allows for immediate, accurate feedback on angle creation, and training appears to be both time and cost-effective. The physiological range allows for a level of variability between surgical outcomes without consequence. However, the more than 20 degree range determined by this study does not fall within those bounds and should be addressed. CLINICAL RELEVANCE: Moving forward, rotational estimation as a surgical skill should increase in prominence within orthopaedic instruction to maximize future joint health, and additional emphasis should be placed on fundamental spatial orientation during training.

Controlling axonal regeneration with acellular nerve allograft limits neuroma formation in peripheral nerve transection: An experimental study in a swine model.

BACKGROUND: Symptomatic neuromata are a common indication for revision surgery following amputation. Previously described treatments, including traction neurectomy, nerve transposition, targeted muscle re-innervation, and nerve capping, have provided inconsistent results or are technically challenging. Prior research using acellular nerve allografts (ANA) has shown controlled termination of axonal regrowth in long grafts. The purpose of this study was to determine the ability of a long ANA to prevent neuroma formation following transection of a peripheral nerve in a swine model. MATERIALS AND METHODS: Twenty-two adult female Yucatan miniature swine (Sus scrofa; 4-6 months, 15-25 kg) were assigned to control (ulnar nerve transection only, n = 10), treatment (ulnar transection and coaptation of 50 mm ANA, n = 10), or donor (n = 2) groups. Nerves harvested from donor group animals were treated to create the ANA. After 20 weeks, the transected nerves including any neuroma or graft were harvested. Both qualitative (nerve architecture, axonal sprouting) and quantitative histologic analyses (myelinated axon number, cross sectional area of nerve tissue) were performed. RESULTS: Qualitative histologic analysis of control specimens revealed robust axon growth into dense scar tissue. In contrast, the treatment group revealed dwindling axons in the terminal tissue, consistent with attenuated neuroma formation. Quantitative analysis revealed a significantly decreased number of myelinated axons in the treatment group (1232 ± 540) compared to the control group (44,380 ± 7204) (p < .0001). Cross sectional area of nerve tissue was significantly smaller in treatment group (2.83 ± 1.53 mm2 ) compared to the control group (9.14 ± 1.19 mm2 ) (p = .0012). CONCLUSIONS: Aberrant axonal growth is controlled to termination with coaptation of a 50 mm ANA in a swine model of nerve injury. These early results suggest further investigation of this technique to prevent and/or treat neuroma formation.

Inhibition of Mammalian Target of Rapamycin Signaling with Rapamycin Prevents Trauma-Induced Heterotopic Ossification.

A pressing clinical need exists for 63% to 65% of combat-wounded service members and 11% to 20% of civilians who develop heterotopic ossification (HO) after blast-related extremity injury and traumatic injuries, respectively. The mammalian target of rapamycin pathway is a central cellular sensor of injury. We evaluated the prophylactic effects of rapamycin, a selective inhibitor of mammalian target of rapamycin signaling, on HO formation in a rat model of blast-related, polytraumatic extremity injury. Rapamycin was administered intraperitoneally daily for 14 days at 0.5 mg/kg or 2.5 mg/kg. Ectopic bone formation was monitored by micro-computed tomography and confirmed by histologic examination. Connective tissue progenitor cells, platelet-derived growth factor receptor-α-positive cells, and α-smooth muscle actin-positive blood vessels were assayed at postoperative day 7 by colony formation and immunofluorescence. Early gene expression changes were determined by low-density microarray. There was significant attenuation of 1) total new bone and soft tissue ectopic bone with 0.5 mg/kg (38.5% and 14.7%) and 2.5 mg/kg rapamycin (90.3% and 82.9%), respectively, 2) connective tissue progenitor cells, 3) platelet-derived growth factor receptor-α-positive cells, 4) α-smooth muscle actin-positive blood vessels, and 5) of key extracellular matrix remodeling (CD44, Col1a1, integrins), osteogenesis (Sp7, Runx2, Bmp2), inflammation (Cxcl5, 10, IL6, Ccl2), and angiogenesis (Angpt2) genes. No wound healing complications were noted. Our data demonstrate the efficacy of rapamycin in inhibiting blast trauma-induced HO by a multipronged mechanism.

Modeling Skeletal Muscle Stress and Intramuscular Pressure: A Whole Muscle Active-Passive Approach.

Clinical treatments of skeletal muscle weakness are hindered by a lack of an approach to evaluate individual muscle force. Intramuscular pressure (IMP) has shown a correlation to muscle force in vivo, but patient to patient and muscle to muscle variability results in difficulty of utilizing IMP to estimate muscle force. The goal of this work was to develop a finite element model of whole skeletal muscle that can predict IMP under passive and active conditions to further investigate the mechanisms of IMP variability. A previously validated hypervisco-poroelastic constitutive approach was modified to incorporate muscle activation through an inhomogeneous geometry. Model parameters were optimized to fit model stress to experimental data, and the resulting model fluid pressurization data were utilized for validation. Model fitting was excellent (root-mean-square error or RMSE <1.5 kPa for passive and active conditions), and IMP predictive capability was strong for both passive (RMSE 3.5 mmHg) and active (RMSE 10 mmHg at in vivo lengths) conditions. Additionally, model fluid pressure was affected by length under isometric conditions, as increases in stretch yielded decreases in fluid pressurization following a contraction, resulting from counteracting Poisson effects. Model pressure also varied spatially, with the highest gradients located near aponeuroses. These findings may explain variability of in vivo IMP measurements in the clinic, and thus help reduce this variability in future studies. Further development of this model to include isotonic contractions and muscle weakness would greatly benefit this work.

Anisotropic compressive properties of passive porcine muscle tissue.

The body has approximately 434 muscles, which makes up 40-50% of the body by weight. Muscle is hierarchical in nature and organized in progressively larger units encased in connective tissue. Like many soft tissues, muscle has nonlinear visco-elastic behavior, but muscle also has unique characteristics of excitability and contractibility. Mechanical testing of muscle has been done for crash models, pressure sore models, back pain, and other disease models. The majority of previous biomechanical studies on muscle have been associated with tensile properties in the longitudinal direction as this is muscle's primary mode of operation under normal physiological conditions. Injury conditions, particularly high rate injuries, can expose muscle to multiple stress states. Compressive stresses can lead to tissue damage, which may not be reversible. In this study, we evaluate the structure-property relationships of porcine muscle tissue under compression, in both the transverse and longitudinal orientations at 0.1 s-1, 0.01 s-1, or 0.001 s-1. Our results show an initial toe region followed by an increase in stress for muscle in both the longitudinal and transverse directions tested to 50% strain. Strain rate dependency was also observed with the higher strain rates showing significantly more stress at 50% strain. Muscle in the transverse orientation was significantly stiffer than in the longitudinal orientation indicating anisotropy. The mean area of fibers in the longitudinal orientation shows an increasing mean fiber area and a decreasing mean fiber area in the transverse orientation. Data obtained in this study can help provide insight on how muscle injuries are caused, ranging from low energy strains to high rate blast events, and can also be used in developing computational injury models.

Effects of static exercises on hip muscle fatigue and knee wobble assessed by surface electromyography and inertial measurement unit data.

Hip muscle weakness can be a precursor to or a result of lower limb injuries. Assessment of hip muscle strength and muscle motor fatigue in the clinic is important for diagnosing and treating hip-related impairments. Muscle motor fatigue can be assessed with surface electromyography (sEMG), however sEMG requires specialized equipment and training. Inertial measurement units (IMUs) are wearable devices used to measure human motion, yet it remains unclear if they can be used as a low-cost alternative method to measure hip muscle fatigue. The goals of this work were to (1) identify which of five pre-selected exercises most consistently and effectively elicited muscle fatigue in the gluteus maximus, gluteus medius, and rectus femoris muscles and (2) determine the relationship between muscle fatigue using sEMG sensors and knee wobble using an IMU device. This work suggests that a wall sit and single leg knee raise activity fatigue the gluteus medius, gluteus maximus, and rectus femoris muscles most reliably (p < 0.05) and that the gluteus medius and gluteus maximus muscles were fatigued to a greater extent than the rectus femoris (p = 0.031 and p = 0.0023, respectively). Additionally, while acceleration data from a single IMU placed on the knee suggested that more knee wobble may be an indicator of muscle fatigue, this single IMU is not capable of reliably assessing fatigue level. These results suggest the wall sit activity could be used as simple, static exercise to elicit hip muscle fatigue in the clinic, and that assessment of knee wobble in addition to other IMU measures could potentially be used to infer muscle fatigue under controlled conditions. Future work examining the relationship between IMU data, muscle fatigue, and multi-limb dynamics should be explored to develop an accessible, low-cost, fast and standardized method to measure fatiguability of the hip muscles in the clinic.

Are methods to quantify osseous exposure in orthopedic surgery reliable?

BACKGROUND: Our study examined if there were any limitations when using various measurement techniques in the literature to quantify osseous exposure. Additionally, we also examined if surface contour had any influence on obtained measurements, which no previous study has attempted. MATERIALS AND METHODS: Three methods used to quantify osseous exposure area were identified, one in which involves manually applying mesh over exposure area. The other two use digital image capture software (ImageJ, Bethesda, MD). We simulated flat, convex, and mixed surface types using synthetic bone analogs. We assessed the degree of variability between mean values using an ANOVA or Kruskal-Wallis equality of populations rank test. Cronbach's alpha test of internal reliability was used to assess the internal reliability of measurement technique. RESULTS: ANOVA test for difference in measurement techniques on all three surface types was statistically significant (p < 0.05). Cronbach's alpha test of internal reliability for each technique on the convex surface did not obtain adequate significance (alpha >0.70). Only the mesh method obtained adequate alpha value for significance when applied to the flat and mixed surface types. DISCUSSION: Each of the three measurement techniques tested demonstrated poor internal reliability. We suggest taking care when comparing studies that use different quantification techniques when calculating osseous exposure for different surgical approaches. Future studies should explore alternative methods of osseous exposure quantification.

Do all patients with history of pelvic ring injuries need a cesarean section? - A survey of orthopaedic and obstetric providers.

OBJECTIVE(S): The recommended mode of delivery following pelvic ring fractures with surgical fixation is unclear. The objective of this study was to assess expert opinions from orthopaedic surgeons and obstetrician gynecologists on their recommended delivery recommendations for pregnant individuals with a history of pelvic ring injury, and to see if there was any difference in recommendations between the two specialties, and what factors influenced recommendations. STUDY DESIGN: An electronic, web-based survey was administered to a convenience sample of orthopaedic surgeons and obstetrician gynecologists, via advertisement to members of the Orthopaedic Trauma Association (OTA), the Society for Maternal Fetal Medicine, and querying obstetrician gynecologists practicing within the Military Health System. The survey was administered from November 2021 to December 2022. A two-proportion z-test, Chi-square or Fisher's Exact Test, and descriptive statistics were used to analyze data. RESULTS: Survey respondents included 44 orthopaedic surgeons and 37 obstetricians. A total of 74 % obstetricians would recommend a trial of labor with hardware in place, while orthopaedic surgeon's recommendations varied based on the type of fixation. Forty four, 100 % of orthopaedic surgeons, recommended trial of labor if non-operative pelvic injury or unilateral posterior fixation only, 88 % recommended trial of labor if bilateral posterior fixation only, and 47.7 % for anterior trans-symphyseal plating only, 50 % for unilateral posterior and trans-symphyseal plating, and 43.2 % for bilateral posterior fixation with trans-symphyseal plating. CONCLUSIONS: The results of these surveys demonstrate the lack of consensus as to the most appropriate birth plan for patients with a history of pelvic ring injuries. Vaginal delivery following pelvic ring fracture and fixation is possible, yet these patients are significantly more likely to undergo cesarean section than the general population. As such, we recommend that women who become pregnant after operative treatment of a pelvic ring injury develop an in-depth birthing plan with their obstetrician to determine the best course.

Biomechanical comparison of composite and cadaveric humeri models in experiments on operated humeral shaft fractures.

A study was undertaken to determine how well contacting fracture fragments of composite bone replicated the behavior of fracture fragments in real bone. Ten composite and ten real humeral diaphyses were transected and reconstructed with limited-contact dynamic-compression plates. Two screws were placed on each side of the transection site and a calibrated electronic sensor sheet was placed between the imitated fracture fragments. After insertion of the distal screws, pressure measurements were made during insertion of the first proximal screw in compression mode, during insertion of the second screw in compression mode after loosening the first screw, and finally after retightening the first screw. The process was repeated after bending the plate. The contact area, the net compression force and the average compressive stress were computed and statistically compared. The composite bone and cadaveric bone differed in contact area and compressive stress but not in net compressive force. Plate bending did not produce a significant difference between composite and cadaveric bone. The results indicate that composite bone does not reproduce all the local fracture fragment conditions so that hardware testing in composite bone should proceed carefully. A gap between fracture fragments as is often used in comminuted fracture tests may remain as the most appropriate situation for fracture hardware testing.

Consensus and Equipose in the Management of Military Trainee Femoral Neck Stress Fractures: A Survey of Military Surgeons.

BACKGROUND: Femoral neck stress fractures (FNSFs) are a unique injury pattern not commonly treated in the civilian trauma population; however, it is particularly high with military trainees engaged in basic combat training. To date, no study has surveyed a population of military orthopedic surgeons on treatment preferences for military service members (SMs) with FNSF. QUESTIONS: We aim to evaluate the extent of clinical equipoise that exists in the management of these injuries, hypothesizing that there would be consensus in the factors dictating surgical and non-surgical intervention for FNSF. PATIENTS AND METHODS: A 27-question survey was created and sent to U.S. military orthopedic surgeon members of the Society of Military Orthopaedic Surgeons. The survey was designed in order to gather the experience among surgeons in treating FNSF and identifying variables that play a role in the treatment algorithm for these patients. In addition, seven detailed, clinical vignettes were presented to further inquire on surgeon treatment preferences. Binomial distribution analysis was used to evaluate for common trends within the surgeon's treatment preferences. RESULTS: Seventy orthopedic surgeons completed the survey, the majority of whom were on active duty status in the U.S. Military (82.86%) and having under 5 years of experience (61.43%). Majority of surgeons elected for a multiple screw construct (92.86%), however the orientation of the multiple screws was dependent on whether the fracture was open or closed. Management for compression-sided FNSF involving ≥50% of the femoral neck width, tension-sided FNSF, and stress fractures demonstrating fracture line progression had consensus for operative management. Respondents agreed upon prophylactic fixation of the contralateral hip if the following factors were involved: Complete fracture (98.57%), compression-sided fracture line >75% (88.57%), compression-sided fracture line >50-75% with hip effusion (88.57%), contralateral tension-sided fracture (87.14%), and compression-sided fracture line >50-75% (84.29%). An FNSF < 50% on the contralateral femoral neck or a hip effusion was indeterminate in surgeons indicating need for prophylactic fixation. Majority of surgeons (77.1%) utilized restricted toe-touch weight-bearing for postoperative mobility restrictions. CONCLUSIONS: Consensus exists for surgical and non-surgical management of FNSF by U.S. military orthopedic surgeons, despite the preponderance of surgeons reporting a low annual volume of FNSF cases treated. However, there are certain aspects in the operative and non-operative management of FNSF that are unanimously adhered to. Specifically, our results demonstrate that there is no clear indication on the management of FNSF when an associated hip effusion is involved. Additionally, the indications for surgically treating contralateral FNSF are unclear. LEVEL OF EVIDENCE: IV.

Patellofemoral joint load and knee abduction/adduction moment are sensitive to variations in femoral version and individual muscle forces.

Torsional profiles of the lower limbs, such as femoral anteversion, can dictate gait and mobility, joint biomechanics and pain, and functional impairment. It currently remains unclear how the interactions between femoral anteversion, kinematics, and muscle activity patterns contribute to joint biomechanics and thus conditions such as knee pain. This study presents a computational modeling approach to investigating the interactions between femoral anteversion, muscle forces, and knee joint loads. We employed an optimal control approach to produce actuator and muscle-driven simulations of the stance phase of gait for femoral anteversion angles ranging from -8° (retroversion) to 52° (anteversion) with a typically developing baseline of 12° of anteversion and implemented a Monte Carlo analysis for variations in lower limb muscle forces. While total patellofemoral joint load decreased with increasing femoral anteversion, patellofemoral joint load alignment worsened, and knee abduction/adduction magnitude increased with both positive and negative changes in femoral anteversion (p < 0.001). The rectus femoris muscle was found to greatly influence patellofemoral joint loads across all femoral anteversion alignments (R > 0.8, p < 0.001), and the medial gastrocnemius was found to greatly influence knee abduction/adduction moments for the extreme version cases (R > 0.74, p < 0.001). Along with the vastus lateralis, which decreased with increasing femoral anteversion (R = 0.89, p < 0.001), these muscles are prime candidates for future experimental and clinical efforts to address joint pain in individuals with extreme femoral version. These findings, along with future modeling efforts, could help clinicians better design treatment strategies for knee joint pain in populations with extreme femoral anteversion or retroversion.

Short-term vancomycin and buffer soaking does not change rabbit achilles tendon tensile material properties.

BACKGROUND: Allograft tendons are commonly used during orthopedic surgery to reconstruct tissue that is severely damaged. Soaking the tendon in an antibiotic solution, specifically vancomycin, has been shown to lower the risk of post-operative infections. While some material properties of tendon and ligament after antibiotic soaking have previously been characterized, extensive sub-failure allograft tendon material properties after soaking in antibiotic solutions have not. METHODS: Forty tendons were dissected from rabbits and soaked in either a phosphate buffered saline (PBS) only solution or vancomycin and PBS solution for five or 30 min. Immediately after soaking, quasi-static tensile experiments were performed in a materials testing system. FINDINGS: Tissue nominal stress, Lagrange strain, toe-region properties and elastic modulus were characterized. For all forty tendons, the average elastic modulus was found to be 455 ± 37 MPa, the average transition strain (from toe-region to linear elastic region) was 0.0487 ± 0.0035, and the average transition stress was 9.71 ± 0.79 MPa. No statistically significant differences in any of these material properties were found across soaking medium or soaking time. INTERPRETATION: From these results, we conclude that soaking an allograft tendon in antibiotic solution for up to 30 min prior to implantation does not change the tensile material properties of tendons, supporting current clinical practice.

Aponeurosis structure-function properties: Evidence of heterogeneity and implications for muscle function.

Aponeurosis is a sheath-like connective tissue that aids in force transmission from muscle to tendon and can be found throughout the musculoskeletal system. The key role of aponeurosis in muscle-tendon unit mechanics is clouded by a lack of understanding of aponeurosis structure-function properties. This work aimed to determine the heterogeneous material properties of porcine triceps brachii aponeurosis tissue with materials testing and evaluate heterogeneous aponeurosis microstructure with scanning electron microscopy. We found that aponeurosis may exhibit more microstructural collagen waviness in the insertion region (near the tendon) compared to the transition region (near the muscle midbelly) (1.20 versus 1.12, p = 0.055), which and a less stiff stress-strain response in the insertion versus transition regions (p < 0.05). We also showed that different assumptions of aponeurosis heterogeneity, specifically variations in elastic modulus with location can alter the stiffness (by more than 10x) and strain (by approximately 10% muscle fiber strain) of a finite element model of muscle and aponeurosis. Collectively, these results suggest that aponeurosis heterogeneity could be due to variations in tissue microstructure and that different approaches to modeling tissue heterogeneity alters the behavior of computational models of muscle-tendon units. STATEMENT OF SIGNIFICANCE: Aponeurosis is a connective tissue found in many muscle tendon units that aids in force transmission, yet little is known about the specific material properties of aponeurosis. This work aimed to determine how the properties of aponeurosis tissue varied with location. We found that aponeurosis exhibits more microstructural waviness near the tendon compared to near the muscle midbelly, which was associated with differences in tissue stiffness. We also showed that different variations in aponeurosis modulus (stiffness) can alter the stiffness and stretch of a computer model of muscle tissue. These results show that assuming uniform aponeurosis structure and modulus, which is common, may lead to inaccurate models of the musculoskeletal system.

Complications of surgically treated pelvic ring injuries with associated genitourinary injuries.

OBJECTIVE: Pelvic ring injuries are often associated with vascular and intrapelvic organ injuries including damage to the genitourinary system. The purpose of this study was to examine the relationship between surgically treated pelvic ring injuries and genitourinary injuries. The primary outcome was to determine the rate of post-operative complications including infection, urinary dysfunction, and sexual dysfunction. The secondary outcome was to determine if the time to surgery was associated with post-operative complications. METHODS: Retrospective chart review from September 1, 2015 to December 31, 2019 of patients who sustained a pelvic ring injury which required surgical intervention. All patients with closed triradiate cartilage were included. RESULTS: A total of 115 patients met the inclusion criteria, 12 patients with an associated genitourinary (GU) injury were included in the GU group and 103 without GU injury were placed in the non-GU group. The median (range) age of patients in the GU group was 49.5 years (20, 64) and 48 years (15, 92) in the control group (p = 0.92). Demographic characteristics including age, Injury Severity Score and Elixhauser comorbidity score were similar between groups. Within the GU group, five patients had an injury to their bladder, four to their urethra and three had an injury to their kidney. In the GU group, one patient developed a wound dehiscence and one developed a urinary tract infection with subsequent sepsis (17%), while in the non-GU group, one patient (1%) developed erectile dysfunction (p = 0.028). Regression analysis demonstrated that having concomitant pelvic ring and GU injuries, as well as the number of surgeries were variables associated with post-operative complications, while time to surgery was not. DISCUSSION AND CONCLUSIONS: Pelvic ring injuries with concomitant genitourinary injuries were associated with increased odds of post-operative complications. No differences were noted in complication rates due to the time to surgery between groups.

How the geometry and mechanics of bighorn sheep horns mitigate the effects of impact and reduce the head injury criterion.

Male bighorn sheep (Ovis canadensis) participate in seasonal ramming bouts that can last for hours, yet they do not appear to suffer significant brain injury. Previous work has shown that the keratin-rich horn and boney horncore may play an important role in mitigating brain injury by reducing brain cavity accelerations through energy dissipating elastic mechanisms. However, the extent to which specific horn shapes (such as the tapered spiral of bighorn sheep) may reduce accelerations post-impact remains unclear. Thus, the goals of this work were to (a) quantify bighorn sheep horn shape, particularly the cross-sectional areal properties related to bending that largely dictate post-impact deformations, and (b) investigate the effects of different tapered horn shapes on reducing post-impact accelerations in an impact model with finite element analysis. Cross-sectional areal properties indicate bighorn sheep horns have a medial-lateral bending preference at the horn tip (p= 0.006), which is likely to dissipate energy through medial-lateral horn tip oscillations after impact. Finite element modeling showed bighorn sheep native horn geometry reduced the head injury criterion (HIC15) by 48% compared to horns with cross-sections rotated by 90° to have a cranial-caudal bending preference, and by 125% compared to a circular tapered spiral model. These results suggest that the tapered spiral horn shape of bighorn sheep is advantageous for dissipating energy through elastic mechanisms following an impact. These findings can be used to broadly inform the design of improved safety equipment and impact systems.

A biomechanical comparison of superior ramus plating versus intramedullary screw fixation for unstable lateral compression pelvic ring injuries,,.

INTRODUCTION: Management of the anterior component of unstable lateral compression (LC) pelvic ring injuries remains controversial. Common internal fixation options include plating and superior pubic ramus screws. These constructs have been evaluated in anterior-posterior compression (APC) fracture patterns, but no study has compared the two for unstable LC patterns, which is the purpose of this study. METHODS: A rotationally unstable LC pelvic ring injury was modeled in 10 fresh frozen cadaver specimens by creating a complete sacral fracture, disruption of posterior ligaments, and ipsilateral superior and inferior rami osteotomies. All specimens were repaired posteriorly with two fully threaded 7 mm cannulated transiliac-transsacral screws through the S1 and S2 corridors. The superior ramus was repaired with either a 3.5 mm pelvic reconstruction plate (n = 5) or a bicortical 5.5 mm cannulated retrograde superior ramus screw (n = 5). Specimens were loaded axially in single leg support for 1000 cycles at 400 N followed by an additional 3 cycles at 800 N. Displacement and angulation of the superior and inferior rami osteotomies were measured with a three-dimensional (3D) motion tracker. The two fixation methods were then compared with Mann-Whitney U-Tests. RESULTS: Retrograde superior ramus screw fixation had lower average displacement and angulation than plate fixation in all categories, with the motion at the inferior ramus at 800 N of loading showing a statistically significant difference in angulation. CONCLUSION: Although management of the anterior ring in unstable LC injuries remains controversial, indications for fixation are becoming more defined over time. In this study, the 5.5 mm cannulated retrograde superior ramus screw significantly outperformed the 3.5 mm reconstruction plate in angulation of the inferior ramus fracture at 800 N. No other significance was found, however the ramus screw demonstrated lower average displacements and angulations in all categories for both the inferior and superior ramus fractures.

Effects of Marijuana Use in Patients with Orthopaedic Trauma.

➢: The use of cannabis and cannabis-related products has increased dramatically in the last 2 decades. As states continue to legalize cannabis products, it is important for surgeons to understand the effects they may have on patients who have sustained orthopaedic trauma. ➢: Cannabinoids have been shown to decrease the severity of certain symptoms related to traumatic brain injury as well as posttraumatic stress disorder. ➢: Cannabinoids can modulate the body's endocannabinoid system, which can play an important role in bone homeostasis. Activation of cannabinoid receptors has been shown to be bone-protective in adults. ➢: Venous thromboembolism is a major concern for trauma patients. Cannabis use has been linked to overall increased rates of venous thromboembolism events. ➢: Literature regarding human-based cannabis studies is sparse; however, the growing field is opening new opportunities for research of this topic.

Improving resident education through unstable chicken hips: a novel way to teach an infant hip examination.

Current clinical screening for infantile hip dysplasia relies on combined Ortolani and Barlow maneuvers, which have a quoted sensitivity and specificity of 74-98 and 84-99%, respectively. Teaching this delicate physical examination maneuver is difficult as it requires a distinct tactile feel. The purpose of this study is to validate a benchtop learning grocery-bought chicken simulator model of newborn hip instability through a pre- and post-test surveys. This model of hip dysplasia uses whole chickens. A posterior capsulotomy of the chicken's hip joint was performed to create instability. Provocative maneuvers to dislocate and relocate the hip were taught by a pediatric orthopedic surgeon. All participants completed an anonymous pre- and post-training surveys. A total of 58 participants were included in the study: 10 medical students, 13 pediatric residents, 15 orthopedic residents, and 20 orthopedic or pediatric attending physicians. The pediatric residents had performed the Barlow/Ortolani tests more than the orthopedic residents (96.15 ± 83.19 vs. 37.53 ± 60.89; P = 0.01); however, fewer pediatric residents reported feeling a positive examination (31 vs. 67%). The majority of the group agreed that the simulation felt and moved like an infant's hip (3.95 and 4.13; Likert five-point scale). The participants unanimously agreed that the model could be used to teach someone new to pediatrics the basic steps of the examination (4.91; Likert five-point scale) and should be implemented in the teaching curriculum (100%). The current study validates the benchtop model in teaching the clinical steps in detecting hip dysplasia. The model improved confidence and comfort level for all participants and proved to be a valuable tool for resident education in multiple specialties. By improving education with this model, we hope to improve early identification of hip dysplasia with increased accuracy across subspecialties.

Can preoperative radiographs predict hardware complication or fracture displacement after operative treatment of pelvic ring injuries?

INTRODUCTION: Operative fixation of pelvic ring injuries is associated with a high risk of hardware failure and loss of reduction. The purpose of this study was to determine whether preoperative radiographs can predict failure after operative treatment of pelvic ring injuries and if the method of fixation effects their risk. PATIENTS AND METHODS: We conducted a retrospective cohort study of 143 patients with pelvic ring injuries treated with operative fixation at a level 1 trauma center. Preoperative radiographs were examined for the presence of the following characteristics: bilateral rami fractures, segmental or comminuted rami fractures, contralateral anterior and posterior injuries, complete sacral fracture, and displaced inferior ramus fractures. The method of fixation was classified based on the presence of anterior, posterior, or combined anterior and posterior fixation as well as whether or not posterior fixation was performed at a single or multiple sacral levels. Post-operative radiographs were examined for hardware failure or loss of reduction. RESULTS: Twenty-one patients (14.7%) demonstrated either hardware complication or fracture displacement within 6 months of surgery. Male sex was associated with a decreased risk of hardware complication (OR 0.11 [0.014, 0.86]; p=0.03). Posterior pelvic ring fixation at multiple sacral levels was associated with a decreased risk of fracture displacement (OR 0.21 [0.056, 0.83]; p=0.02). We were unable to demonstrate a significant association between preoperative radiographic characteristics and risk of hardware failure or fracture displacement. CONCLUSION: Our study demonstrates that both gender and the method of posterior fixation are associated with hardware failure or displacement.