Crop switching can enhance environmental sustainability and farmer incomes in China.

Achieving food-system sustainability is a multidimensional challenge. In China, a doubling of crop production since 1990 has compromised other dimensions of sustainability1,2. Although the country is promoting various interventions to enhance production efficiency and reduce environmental impacts3, there is little understanding of whether crop switching can achieve more sustainable cropping systems and whether coordinated action is needed to avoid tradeoffs. Here we combine high-resolution data on crop-specific yields, harvested areas, environmental footprints and farmer incomes to first quantify the current state of crop-production sustainability. Under varying levels of inter-ministerial and central coordination, we perform spatial optimizations that redistribute crops to meet a suite of agricultural sustainable development targets. With a siloed approach-in which each government ministry seeks to improve a single sustainability outcome in isolation-crop switching could realize large individual benefits but produce tradeoffs for other dimensions and between regions. In cases of central coordination-in which tradeoffs are prevented-we find marked co-benefits for environmental-impact reductions (blue water (-4.5% to -18.5%), green water (-4.4% to -9.5%), greenhouse gases (GHGs) (-1.7% to -7.7%), fertilizers (-5.2% to -10.9%), pesticides (-4.3% to -10.8%)) and increased farmer incomes (+2.9% to +7.5%). These outcomes of centrally coordinated crop switching can contribute substantially (23-40% across dimensions) towards China's 2030 agricultural sustainable development targets and potentially produce global resource savings. This integrated approach can inform feasible targeted agricultural interventions that achieve sustainability co-benefits across several dimensions.

Unraveling the Intrinsic Origin of the Superior Sodium-Ion Storage Performance of Metal Selenides Anode in Ether-Based Electrolytes.

Metal selenides show outstanding sodium-ion storage performance when matched with an ether-based electrolyte. However, the intrinsic origin of improvement and deterministic interface characteristics have not been systematically elucidated. Herein, employing FeSe2 anode as the model system, the electrochemical kinetics of metal selenides in ether and ester-based electrolytes and associated solid electrolyte interphase (SEI) are investigated in detail. Based on the galvanostatic intermittent titration technique and in situ electrochemical impedance spectroscopy, it is found that the ether-based electrolyte can ensure fast Na+ transfer and low interface impedance. Additionally, the ether-derived thin and smooth double-layer SEI, which is critical in facilitating ion transport, maintaining structural stability, and inhibiting electrolyte overdecomposition, is concretely visualized by transmission electron microscopy, atomic force microscopy, and depth-profiling X-ray photoelectron spectroscopy. This work provides a deep understanding of the optimization mechanism of electrolytes, which can guide available inspiration for the design of practical electrode materials.

Designable Nanoadaptor for Enhanced Recognition of Natural Killer Cell to Tumor via Bio-orthogonal Click Reaction.

Highly efficient recognition of cancer cells by immune cells is important for successful therapeutic-cell-based cancer immunotherapy. Herein, we present a facile NIR-II nanoadaptor [hyaluronic acid (HA)/dibenzocyclooctyne (DBCO)-Au:Ag2Te quantum dots (QDs)] for enhancing the tumor recognition and binding ability of natural killer (NK) cells via a bio-orthogonal click reaction in vivo. The Nanoadaptor possesses superior tumor-targeting capacity, facilitating the accumulation of the chemical receptor DBCO at the tumor sites. Subsequently, the enrichment of DBCO on tumor cell surfaces provides multivalent recognition sites for capturing pretreated azide engineered NK92 cells (NK92-N3) through an efficient click reaction, thereby significantly enhancing the therapeutical efficiency. The dynamic process of nanoadaptor-mediated recognition of NK cells to tumor cells could be vividly observed using multiplexed NIR-II fluorescence imaging in a mouse model of lung cancer. Such a nanoadaptor strategy can be extended to other therapeutic cellular systems and holds promise for future clinical applications.

Programmed Remodeling of the Tumor Milieu to Enhance NK Cell Immunotherapy Combined with Chemotherapy for Pancreatic Cancer.

Natural killer (NK) cell-based adoptive immunotherapy has demonstrated encouraging therapeutic effects in clinical trials for hematological cancers. However, the effectiveness of treatment for solid tumors remains a challenge due to insufficient recruitment and infiltration of NK cells into tumor tissues. Herein, a programmed nanoremodeler (DAS@P/H/pp) is designed to remodel dense physical stromal barriers and for dysregulation of the chemokine of the tumor environment to enhance the recruitment and infiltration of NK cells in tumors. The DAS@P/H/pp is triggered by the acidic tumor environment, resulting in charge reversal and subsequent hyaluronidase (HAase) release. HAase effectively degrades the extracellular matrix, promoting the delivery of immunoregulatory molecules and chemotherapy drugs into deep tumor tissues. In mouse models of pancreatic cancer, this nanomediated strategy for the programmed remodeling of the tumor microenvironment significantly boosts the recruitment of NK92 cells and their tumor cell-killing capabilities under the supervision of multiplexed near-infrared-II fluorescence.

Test-Time Training for Deep MS/MS Spectrum Prediction Improves Peptide Identification.

In bottom-up proteomics, peptide-spectrum matching is critical for peptide and protein identification. Recently, deep learning models have been used to predict tandem mass spectra of peptides, enabling the calculation of similarity scores between the predicted and experimental spectra for peptide-spectrum matching. These models follow the supervised learning paradigm, which trains a general model using paired peptides and spectra from standard data sets and directly employs the model on experimental data. However, this approach can lead to inaccurate predictions due to differences between the training data and the experimental data, such as sample types, enzyme specificity, and instrument calibration. To tackle this problem, we developed a test-time training paradigm that adapts the pretrained model to generate experimental data-specific models, namely, PepT3. PepT3 yields a 10-40% increase in peptide identification depending on the variability in training and experimental data. Intriguingly, when applied to a patient-derived immunopeptidomic sample, PepT3 increases the identification of tumor-specific immunopeptide candidates by 60%. Two-thirds of the newly identified candidates are predicted to bind to the patient's human leukocyte antigen isoforms. To facilitate access of the model and all the results, we have archived all the intermediate files in Zenodo.org with identifier 8231084.

The key role of glutamine for protein expression and isotopic labeling in insect cells.

Nuclear magnetic resonance studies of many physiologically important proteins have long been impeded by the necessity to express such proteins in isotope-labeled form in higher eukaryotic cells and the concomitant high costs of providing isotope-labeled amino acids in the growth medium. Economical routes use isotope-labeled yeast or algae extracts but still require expensive isotope-labeled glutamine. Here, we have systematically quantified the effect of 15N2-glutamine on the expression and isotope labeling of different proteins in insect cells. Sufficient levels of glutamine in the medium increase the protein expression by four to five times relative to deprived conditions. 1H-15N nuclear magnetic resonance spectroscopy shows that the 15N atoms from 15N2-glutamine are scrambled with surprisingly high (60-70%) efficiency into the three amino acids alanine, aspartate, and glutamate. This phenomenon gives direct evidence that the high energy demand of insect cells during baculovirus infection and concomitant heterologous protein expression is predominantly satisfied by glutamine feeding the tricarboxylic acid cycle. To overcome the high costs of supplementing isotope-labeled glutamine, we have developed a robust method for the large-scale synthesis of 15N2-glutamine and partially deuterated 15N2-glutamine-α,ß,ß-d3 from inexpensive precursors. An application is shown for the effective large-scale expression of the isotope-labeled ß1-adrenergic receptor using the synthesized 15N2-glutamine-α,ß,ß-d3.

Origin of Water-Stable CsPbX3 Quantum Dots Assisted by Zwitterionic Ligands and Sequential Strategies for Enhanced Luminescence Based on Crystal Evolution.

Water stability is a crucial issue always addressed for commercial practical application of perovskite quantum dots (QDs). Recent advances in ligand engineering for in situ synthesis of water-stable perovskite QDs have attracted growing interest. However, the exact mechanism remains unclear. Here, the function of 4-bromobutyric acid (BBA) and oleylamine (OLA) is systematically studied in water-stable CsPbX3 (X = Br and I) QDs and confirms that the zwitterionic ligands generated in situ by BBA and OLA are anchored on the QDs surface, thus preventing water from penetrating into the QDs. Cs4PbBr6 intermediate crystal found in the crystal structure evolution process of CsPbX3 QD further reveals a complete crystallization process: PbX2 + CsX + Br- → Cs4PbBr6 crystals + X-→ CsPbX3 QDs + Br-. Furthermore, it is found that the solvent coordination of the precursor solution has a significant effect on the crystallinity of Cs4PbBr6 intermediate crystal, while the Rb+ doping can effectively passivate the surface defects of CsPbX3 QDs, thereby jointly achieving photoluminescence quantum yields (PLQY) of 94.6% for CsPbBr3 QDs (88.2% for CsPbI3 QDs). This work provides new insights and guiding ideas for the green synthesis of high-quality and water-stable perovskite QDs.

Double-Salts Super Concentrated Carbonate Electrolyte Boosting Electrochemical Performance of Ni-Rich LiNi0.90Co0.05Mn0.05O2 Lithium Metal Batteries.

Current lithium-ion batteries cannot meet the requirement of higher energy density with further large-scale application of electrical vehicles. Lithium metal batteries combined with Ni-rich layered oxides cathode are expected as the one of promising solutions, while the poor electrode and electrolyte interface impedes the commercial development of lithium metal batteries. A new double-salts super concentrated (DSSC) carbonate electrolyte is proposed to improve the electrochemical performance of LiNi0.90Co0.05Mn0.05O2 (NCM9055)||Li metal battery which exhibits stable cycling performance with the capacity retention of 93.04% and reversible capacity of 173.8 mAh g-1 after 100 cycles at 1 C, while cells with conventional 1 m diluted electrolyte remains only 60.55% and capacity of 114.2 mAh g-1. The double salts synergistic effect in super concentrated electrolyte promotes the formation for more balanced stable cathode electrolyte interface (CEI) inorganic compounds of CFx, LiNOx, SOF2, Li2SO4, and less LiF by X-ray photoelectron spectroscopy (XPS) test, and the uniform 2-3 nm rock-salt phase protection layer on the cathode surface by transmission electron microscope (TEM) characterization, improving the cycling performance of the Ni-rich NCM9055 layered oxide cathode. The DSSC electrolyte also can relief the Li dendrite growth on Li metal anode, as well as exhibit better flame retardance, promoting the application of more safety Ni-rich NCM9055||Li metal batteries.

Yolk-Shell Construction of Na3 V2 (PO4 )2 F3 with Copper Substitution Microsphere as High-Rate and Long-Cycling Cathode Materials for Sodium-Ion Batteries.

Na3 V2 (PO4 )2 F3 (NVPF) is emerging as a promising cathode material for high-voltage sodium-ion batteries. Whereas, the inferior intrinsic electrical conductivity leading to poor rate performance and cycling stability. To address this issue, a strategy of synthesizing unique yolk-shell structured NVPF with copper substitution via spray drying method is proposed. Besides, the synergistic modulation of both crystalline structure and interfacial properties results in significantly enhanced intrinsic and interfacial conductivity of NVPF. The optimized yolk-shell structured cathode materials can possess a high capacity of 117.4 mAh g-1 at 0.1 C, and remains a high-capacity retention of 91.3% after 5000 cycles. A detailed investigation of kinetic properties combined with in situ XRD technology and DFT calculations, has been implemented, particularly with regard to electron conduction and sodium ion diffusion. Consequently, the yolk-shell structured composition of Na3 V1.94 Cu0.06 (PO4 )2 F3 with nitrogen-modified carbon coating layer shows the lowest polarization potential because of the effectively enhanced electronic conductivity and Na+ diffusion process in the bulk phase. The robust electrochemical performance suggests that developing the unique yolk-shell structure with the collaboration of interface and bulk crystal properties is a favorable strategy to design cathode material with a high performance for sodium-ion batteries.

Organic Intercalation Induced Kinetic Enhancement of Vanadium Oxide Cathodes for Ultrahigh-Loading Aqueous Zinc-Ion Batteries.

Vanadium-based oxides have attracted much attention because of their rich valences and adjustable structures. The high theoretical specific capacity contributed by the two-electron-transfer process (V5+ /V3+ ) makes it an ideal cathode material for aqueous zinc-ion batteries. However, slow diffusion kinetics and poor structural stability limit the application of vanadium-based oxides. Herein, a strategy for intercalating organic matter between vanadium-based oxide layers is proposed to attain high rate performance and long cycling life. The V3 O7 ·H2 O is synthesized in situ on the carbon cloth to form an open porous structure, which provides sufficient contact areas with electrolyte and facilitates zinc ion transport. On the molecular level, the added organic matter p-aminophenol (pAP) not only plays a supporting role in the V3 O7 ·H2 O layer, but also shows a regulatory effect on the V5+ /V4+ redox process due to the reducing functional group on pAP. The novel composite electrode with porous structure exhibits outstanding reversible specific capacity (386.7 mAh g-1 , 0.1 A g-1 ) at a high load of 6.5 mg cm-2 , and superior capacity retention of 80% at 3 A g-1 for 2100 cycles.

Spherical Shell with CNTs Network Structuring Fe-Based Alluaudite Na2+2 δ Fe2- δ (SO4 )3 Cathode and Novel Phase Transition Mechanism for Sodium-Ion Battery.

Iron-based sulfate cathodes of alluaudite Na2+2 δ Fe2- δ (SO4 )3 (NFS) in sodium-ion batteries with low cost, steady cycling performance, and high voltage are promising for grid-scale energy storage systems. However, the poor electronic conductivity and the limited understanding of the phase-evolution of precursors hinder obtaining high-rate capacity and the pure phase. Distinctive NFS@C@n%CNTs (n = 1, 2, 5, 10) sphere-shell conductive networks composite cathode materials are constructed creatively, which exhibit superior reversible capacity and rate performance. In detail, the designed NFS@C@2%CNTs cathode delivers an initial discharge capacity of 95.9 mAh g-1 at 0.05 C and up to 60 mAh g-1 at a high rate of 10 C. The full NFS@C@2%CNTs//HC cell delivers a practical operating voltage of 3.5 V and mass-energy density of 140 Wh kg-1 at 0.1 C, and it can also retain 67.37 mAh g-1 with a capacity retention rate of 96.4% after 200 cycles at 2 C. On the other hand, a novel combination reaction mechanism is first revealed for forming NFS from the mixtures of Na2 Fe(SO4 )2 ·nH2 O (n = 2, 4) and FeSO4 ·H2 O during the sintering process. The inspiring results would provide a novel perspective to synthesize high-performance alluaudite sulfate and analogs by aqueous methods.

Enabling High-Performance Layered Li-Rich Oxide Cathodes by Regulating the Formation of Integrated Cation-Disordered Domains.

Layered Li-rich oxide cathode materials are capable of offering high energy density due to their cumulative cationic and anionic redox mechanism during (de)lithiation process. However, the structural instability of the layered Li-rich oxide cathode materials, especially in the deeply delitiated state, results in severe capacity and voltage degradation. Considering the minimal isotropic structural evolution of disordered rock salt oxide cathode during cycling, cation-disordered nano-domains have been controllably introduced into layered Li-rich oxides by co-doping of d0-TM and alkali ions. Combining electrochemical and synchrotron-based advanced characterizations, the incorporation of the phase-compatible cation-disordered domains can not only hinder the oxygen framework collapse along the c axis of layered Li-rich cathode under high operation voltage but also promote the Mn and anionic activities as well as Li+ (de)intercalation kinetics, leading to remarkable improvement in rate capability and mitigation of capacity and voltage decay. With this unique layered/rocksalt intergrown structure, the intergrown cathode yields an ultrahigh capacity of 288.4 mAh g-1 at 0.1 C, and outstanding capacity retention of ≈90.0% with obviously suppressed voltage decay after 100 cycles at 0.5, 1, and 2 C rate. This work provides a new direction toward advanced cathode materials for next-generation Li-ion batteries.

Stable Lithium Metal Batteries Enabled by Lithiophilic Core-Shell Nanowires on Copper Foam.

Lithium (Li) metal batteries have attracted considerable research attention due to their exceptionally high theoretical capacity. However, the commercialization of Li metal batteries faces challenges, primarily attributed to uncontrolled growth of Li dendrites, which raises safety concerns and lowers coulombic efficiency. To mitigate Li dendrites growth and attain dense Li deposition, the hybrid SiO2-Cu2O lithiophilic film applied to a 3D copper foam current collector is developed to regulate the interfacial properties for achieving even and dense Li deposition. The SiO2-Cu2O possesses strong Li+ trapping capability through strong lithiophilicity from Cu2O. Additionally, the SiO2-Cu2O enables uniform ion diffusion through the domain-limiting effect of the holes in the SiO2 layer, inducing an even and dense Li plating/stripping behavior at a large capacity. Furthermore, the SiO2 layer promotes the formation of an initial high inorganic content Solid Electrolyte Interphase (SEI) through selective preferential binding with anion and solvent molecules. When the SiO2-Cu2O@Li anode is coupled with a LiFePO4 (LFP) cathode, the resulting full cell exhibits superior cycling stability and rate performance. These results provide a facile approach to construct a lithiophilic current collector for practical Li metal anodes.

In Situ Constructed Spinel Layer Stabilized Upcycled LiCoO2 for High Performance Lithium-Ion Batteries.

With ever-increasing requirements for cathodes in the lithium-ion batteries market, an efficiency and eco-friendly upcycling regeneration strategy is imperative to meet the demand for high-performance cathode materials. Herein, a facile, direct and upcycling regeneration strategy is proposed to restore the failed LiCoO2 and enhance the stability at 4.6 V. Double effects combination of relithiation and outside surface reconstruction are simultaneously achieved via a facile solid-phase sintering method. The evolution process of the Li-supplement and grain-recrystallization is systematically investigated, and the high performance of the upcycled materials at high voltage is comprehensively demonstrated. Thanks to the favorable spinel LiCoxMn2-xO4 surface coating, the upcycled sample displays outstanding electrochemical performance, superior to the pristine cathode materials. Notably, the 1% surface-coated LiCoO2 achieves a high discharge-specific capacity of 207.9 mA h g-1 at 0.1 C and delivers excellent cyclability with 77.0% capacity retention after 300 cycles. Significantly, this in situ created spinel coating layer can be potentially utilized for recycling spent LiCoO2, thus providing a viable, promising recycling strategy insights into the upcycling of degraded cathodes.

LiPF6 Induces Phosphorization of Garnet-Type Solid-State Electrolyte for Stable Lithium Metal Batteries.

Garnet solid electrolyte Li6.4 La3 Zr1.4 Ta0.6 O12 (LLZTO) is an excellent inorganic ceramic-type solid electrolyte; however, the presence of Li2 CO3 impurities on its surface hinders Li-ion transport and increases the interface impedance. In contrast to traditional methods of mechanical polishing, acid corrosion, and high-temperature reduction for removing Li2 CO3 , herein, a straightforward "waste-to-treasure" strategy is proposed to transform Li2 CO3 into Li3 PO4 and LiF in LiPF6 solution under 60 °C. It is found that the formation of Li3 PO4 during LLZTO pretreatment facilitates rapid Li-ion transport and enhances ionic conductivity, and the LLZTO/PAN composite polymer electrolyte shows the highest Li-ion transference number of 0.63. Additionally, the dense LiF layer serves to safeguard the internal garnet solid electrolyte against solvent decomposition-induced chemical adsorption. Symmetric Li/Li cells assembled with treated LLZTO/PAN composite electrolyte exhibit a critical current density of 1.1 mA cm-2 and a long lifespan of up to 700 h at a current density of 0.2 mA cm-2 . The Li/LiFePO4 solid-state cells demonstrate stable cycling performances for 141 mAh g-1 at 0.5 C, with capacity retention of 93.6% after 190 cycles. This work presents a novel approach to converting waste into valuable resources, offering the advantages of simple processes, and minimal side reactions.

Low-threshold AlGaN-based deep ultraviolet laser enabled by a nanoporous cladding layer.

We demonstrated an AlGaN-based multiple-quantum-well (MQW) deep ultraviolet (DUV) laser at 278 nm using a nanoporous (NP) n-AlGaN as the bottom cladding layer grown on the sapphire substrate. The laser has a very-low-threshold optically pumped power density of 79 kW/cm2 at room temperature and a transverse electric (TE)-polarization-dominant emission. The high optical confinement factor of 9.12% benefiting from the low refractive index of the nanoporous n-AlGaN is the key to enable a low-threshold lasing. The I-V electrical measurement demonstrates that an ohmic contact can be still achieved in the NP n-AlGaN with a larger but acceptable resistance, which indicates it is compatible with electrically driven laser devices. Our work provides insights into the design and fabrication of low-threshold lasers emitting in the DUV regime.

Efficient Initialization of Fluxonium Qubits based on Auxiliary Energy Levels.

Fast and high-fidelity qubit initialization is crucial for low-frequency qubits such as fluxonium, and in applications of many quantum algorithms and quantum error correction codes. In a circuit quantum electrodynamics system, the initialization is typically achieved by transferring the state between the qubit and a short-lived cavity through microwave driving, also known as the sideband cooling process in atomic system. Constrained by the selection rules from the parity symmetry of the wave functions, the sideband transitions are only enabled by multiphoton processes which require multitone or strong driving. Leveraging the flux tunability of fluxonium, we circumvent this limitation by breaking flux symmetry to enable an interaction between a noncomputational qubit transition and the cavity excitation. With single-tone sideband driving, we realize qubit initialization with a fidelity exceeding 99% within a duration of 300 ns, robust against the variation of control parameters. Furthermore, we show that our initialization scheme has a built-in benefit in simultaneously removing the second-excited state population of the qubit, and can be easily incorporated into a large-scale fluxonium processor.

Native Approach to Controlled-Z Gates in Inductively Coupled Fluxonium Qubits.

The fluxonium qubits have emerged as a promising platform for gate-based quantum information processing. However, their extraordinary protection against charge fluctuations comes at a cost: when coupled capacitively, the qubit-qubit interactions are restricted to XX interactions. Consequently, effective ZZ or XZ interactions are only constructed either by temporarily populating higher-energy states, or by exploiting perturbative effects under microwave driving. Instead, we propose and demonstrate an inductive coupling scheme, which offers a wide selection of native qubit-qubit interactions for fluxonium. In particular, we leverage a built-in, flux-controlled ZZ interaction to perform qubit entanglement. To combat the increased flux-noise-induced dephasing away from the flux-insensitive position, we use a continuous version of the dynamical decoupling scheme to perform noise filtering. Combining these, we demonstrate a 20 ns controlled-z gate with a mean fidelity of 99.53%. More than confirming the efficacy of our gate scheme, this high-fidelity result also reveals a promising but rarely explored parameter space uniquely suitable for gate operations between fluxonium qubits.

Advances in Inorganic Solid-State Electrolyte/Li Interface.

The increasing demand for high-energy-density and high-safety energy storage devices has sparked a growing interest in all-solid-state lithium metal batteries (ASSLMBs). A high-quality inorganic solid-state electrolyte (ISE) is a fundamental requirement for ASSLMBs, and an effective ISE/Li interface is a key factor in attaining high-performance ASSLMBs. In this Concept, we initially summarize the challenges encountered by ISE/Li interfaces and delineate four commonly employed strategies for modifying the ISE/Li interface. Then, we explore the merits and drawbacks of coatings utilized as ISE/Li interfacial phases. We also delve into the commonly employed thermal bonding and innovative cold bonding methods utilized for in situ interface preparation. Lastly, we spotlight future directions for enhancing the functionality of ISE/Li interfaces and achieving high-performance ASSLMBs.

Astrocyte PERK and IRE1 Signaling Contributes to Morphine Tolerance and Hyperalgesia through Upregulation of Lipocalin-2 and NLRP3 Inflammasome in the Rodent Spinal Cord.

BACKGROUND: Endoplasmic reticulum stress plays a crucial role in the pathogenesis of neuroinflammation and chronic pain. This study hypothesized that PRKR-like endoplasmic reticulum kinase (PERK) and inositol-requiring enzyme type 1 (IRE1) regulate lipocalin-2 (LCN2) and Nod-like receptor family pyrin domain containing 3 (NLRP3) expression in astrocytes, thereby contributing to morphine tolerance and hyperalgesia. METHODS: The study was performed in Sprague-Dawley rats and C57/Bl6 mice of both sexes. The expression of LCN2 and NLRP3 was assessed by Western blotting. The tail-flick, von Frey, and Hargreaves tests were used to evaluate nociceptive behaviors. Chromatin immunoprecipitation was conducted to analyze the binding of activating transcription factor 4 (ATF4) to the promoters of LCN2 and TXNIP. Whole-cell patch-clamp recordings were used to evaluate neuronal excitability. RESULTS: Pharmacologic inhibition of PERK and IRE1 attenuated the development of morphine tolerance and hyperalgesia in male (tail latency on day 7, 8.0 ± 1.13 s in the morphine + GSK2656157 [10 µg] group vs. 5.8 ± 0.65 s in the morphine group; P = 0.04; n = 6 rats/group) and female (tail latency on day 7, 6.0 ± 0.84 s in the morphine + GSK2656157 [10 µg] group vs. 3.1 ± 1.09 s in the morphine group; P = 0.0005; n = 6 rats/group) rats. Activation of PERK and IRE1 upregulated expression of LCN2 and NLRP3 in vivo and in vitro. Chromatin immunoprecipitation analysis showed that ATF4 directly bound to the promoters of the LCN2 and TXNIP. Lipocalin-2 induced neuronal hyperexcitability in the spinal cord and dorsal root ganglia via melanocortin-4 receptor. CONCLUSIONS: Astrocyte endoplasmic reticulum stress sensors PERK and IRE1 facilitated morphine tolerance and hyperalgesia through upregulation of LCN2 and NLRP3 in the spinal cord.