Biochar microtube interconnected hydrotalcite nanosheets for the adsorption of aqueous Sb(III).

Actuated by the non-ionic heavy metal of antimony (Sb) contaminants with undesired toxicity to the environment and human health, capturing Sb is urgent to remedy contaminated water. Herein, the lamellar MnCo hydrotalcite was grown on catkin-derived biochar through the in situ etching of ZIF-L to construct a hierarchical microtube@nanosheet hybrid (CLMH) for Sb immobilization. The adsorption behaviour and mechanism of trivalent antimony (Sb (III)) on the CLMH were investigated. The CLMH shows good pH applicability for capturing Sb(III) at pH from 2 to 9. The excellent adsorption capacity of CLMH for Sb(III) is 247.62 mg g-1at 303 K, and the endothermic process is proved by the positive value of ΔH0(10.54 kJ mol-1). The adsorption process is fitted with the intra-particle diffusion model, which can be described with external mass transfer, intraparticle diffusion in pores, and equilibrium stage. The adsorption mechanism is proved, which includes the bind of Metal-O-Sb bonds by inner-sphere complex, the embedding of Sb in the intercalation of hydrotalcite, redox between Mn and Sb, and functional groups dependent anchoring effect. The work benefits the understanding of the antimony removal behaviour over the hierarchical microtube@nanosheet hybrids.

Direct sulfhydryl ligand derived UiO-66 for the removal of aqueous mercury and its subsequent application as a catalyst for transfer vinylation.

The treatment of mercury pollutants in water has been wide concern. Adsorption is a promising method for mercury removal that has been extensively studied. Nevertheless, the secondary application of the immobilized Hg is seldom investigated. In this paper, the Hg adsorption behavior of UiO-66 bearing sulfhydryl groups is studied. The research shows that the porous structure and sulfhydryl groups of UiO-66-SH can effectively promote the removal of mercury from water. In addition, this work also pushes forward the sequential application of the recovered adsorbent, which contains the adsorbed mercury that may cause secondary pollution. The recovered waste adsorbent, UiO-66-S-Hg, was successfully used as an efficient catalyst for transfer vinylation, which produces value-added products, vinyl benzoates. Eight vinyl esters have been successfully synthesized with a yield of up to 89%. This methodology provides a promising way for not only the treatment of mercury contamination, but also secondary pollution protection and the resource utilization of immobilized Hg.

Insights into adsorptive removal of antimony contaminants: Functional materials, evaluation and prospective.

The application of antimony containing compounds in the industry has generated considerable antimony contaminants, which requires to develop methods that are as efficient as possible to remove antimony from water in the view of human health. The adsorption is among the most high-efficiency and reliable purification methods for hazardous materials due to the simple operation, convenient recycling and low cost. Herein, this review systematically summarizes the functional materials that are used to adsorb antimony from water, including metal (oxides) based materials, carbon-based materials, MOFs and molecular sieves, layered double hydroxides, natural materials, and organic-inorganic hybrids. The iron-based adsorbents stand out among these adsorbents because of their excellent performance. Moreover, the interaction between antimony and different functional materials is discussed in detail, while the inner-sphere complexation, hydrogen bond as well as ligand exchange are the main impetus during antimony adsorption. In addition, the desorption methods in adsorbents recycling are also comprehensively summarized. Furthermore, we propose an adsorption capacity balanced evaluation function (ABEF) based on the reported results to evaluate the performance of the antimony adsorption materials for both Sb(III) and Sb(V), as antimony usually has two valence forms of Sb(III) and Sb(V) in wastewater. Another original insight in this review is that we put forward a potential application prospect for the antimony-containing waste adsorbents. The feasible future development includes the utilization of the recycled antimony-containing waste adsorbents in catalysis and energy storage, and this will provide a green and sustainable pathway for both antimony removal and resourization.

Investigation of antimony adsorption on a zirconium-porphyrin-based metal-organic framework.

A zirconium-porphyrin based organic framework PCN-222 was employed for investigating the adsorption performance of Sb(III) in aqueous solution. It is proved that the adsorbent has the advantages of rapid adsorption and high capacity. Interestingly, we discover that PCN-222 shows pH-dependent adsorption performance, with higher capacity at pH = 2 and 8 than at pH = 5. According to XPS and FT-IR analyses, an adsorption model of PCN-222 with pH = 2, 5, and 8 is proposed, that is, zirconium clusters combine with antimony at different pH values with bidentate complexes, monodentate complexes, and alkaline monodentate complexes, thus producing an excellent adsorption effect. Moreover, the porphyrin ring is also beneficial for the adsorption of antimony. In addition, PCN-222 shows good regeneration and recycling performance, and it is a promising adsorbent as well as a platform for investigating the removal of Sb(III) in water treatment.