RESUMO
Methylenecyclopropanes (MCPs) have emerged as versatile building blocks in synthetic chemistry because of their unique reactivity. However, metal-catalyzed hydrosilylation of MCPs has met with very limited successes. In this paper, catalytic selective hydrosilylations of MCPs with some primary silanes using an ene-diamido lanthanum ate complex as the catalyst were described. The catalytic reactions resulted in the selective formation of silacyclopentanes and (E)-homoallylsilanes, respectively, depending on the substituents on MCPs. The formation of silacyclopentanes via a catalytic cascade inter- and intramolecular hydrosilylation mechanism is strongly supported by the control and deuteration-labeling experiments and DFT calculations. The unique reactivity and selectivity could be attributed to the large lanthanum ion and ate structure of the catalyst.
RESUMO
Herein, a type of light- and heat-driven flexible supramolecular polymer with reversibly long-lived phosphorescence and photochromism is constructed from acrylamide copolymers with 4-phenylpyridinium derivatives containing a cyano group (P-CN, P-oM, P-mM), sulfobutylether-ß-cyclodextrin (SBCD), and polyvinyl alcohol (PVA). Compared to their parent solid polymers, these flexible supramolecules based on the non-covalent cross-linking of copolymers, SBCD, and PVA efficiently boost the phosphorescence lifetimes (723.0 ms for P-CN, 623.0 ms for P-oM, 945.8 ms for P-mM) through electrostatic interaction and hydrogen bonds. The phosphorescence intensity/lifetime, showing excellent responsiveness to light and heat, sharply decreased after irradiation with a 275 nm flashlight or sunlight and gradually recovered through heating. This is accompanied by the occurrence and fading of visible photochromism, manifesting as dark green for P-CN and pink for P-oM and P-mM. These reversible photochromism and phosphorescence behaviors are mainly attributed to the generation and disappearance of organic radicals in the 4-phenylpyridinium derivatives with a cyano group, which can guide tunable luminescence and photochromism.
RESUMO
The mechanisms of Ni-catalyzed 3,3-dialkynylation of 2-aryl acrylamide have been investigated by using density functional theory calculations. The result shows that this reaction includes double alkynylation, which involves sequential key steps of vinylic C-H bond activation, successive oxidative addition, and reductive elimination, with the second C-H bond activation being the rate-determining step. C-H and N-H bond activation occurs via the concerted metalation-deprotonation mechanism. The calculations show that no transition state exists in the first reductive elimination process, and a negative free energy barrier in the second reductive elimination process though a transition state is identified, indicating that the nickel-catalyzed vinylic C(sp2)-C(sp) bond formation does not require activation energy. Z-E isomerization is the prerequisite for the second alkynylation. In addition, our spin-flip TDDFT (SF-TDDFT) computational result discloses that the actual process of Z-E isomerization occurs on the potential energy surface of the first excited singlet state S1.
RESUMO
The mechanism of the Ac-Gly-OH-assisted palladium-catalyzed [3 + 2] annulation of aromatic amides with maleimides is investigated using density functional theory calculations. The results show that the reaction undergoes the sequential steps of N-H bond deprotonation, first benzylic C-H bond activation, maleimide insertion, second meta-C-H bond activation, reductive elimination, and oxidation. The external ligand Ac-Gly-OH acts as the internal base for hydrogen abstraction in the first benzylic C-H bond activation. The maleimide insertion step is found to be the rate-determining step. Based on the nearly same energetic span of the two pathways to generate the enantio products, the computational results are consistent with the experimental observation that the terminal [3 + 2] annulation products are racemic when using an achiral ligand. These calculation results disclose the detailed reaction mechanism and shed light on some experimental ambiguities.
RESUMO
The mechanism of Ni-catalyzed carboxylation of aryl C(sp2)-S bonds with CO2 was studied for the first time by density functional theory calculations. We first proposed another possible reaction pathway in which CO2 insertion occurs prior to reduction. Then, we performed calculations on all proposed reaction pathways, and our calculation results show that the pathway in which reduction occurs prior to CO2 insertion is the favored pathway for this reaction. Additionally, our calculations disclose that additive Zn0 acts in multifaceted roles. (1) Zn0 acts as a reductant to reduce the NiI and NiII intermediates. (2) The simultaneously formed ZnIIBr2 can undergo transmetalation with NiI or NiII intermediates to produce an aryl reservoir by forming arylzinc species. (3) ZnIIBr2 can also coordinate to the CO2 to lower the energy barrier of the CO2 insertion step. Moreover, the calculation results suggest that CO2 insertion is the rate-determining step of the reaction, and CO2 is easier to insert into the NiI-Ph bond rather than into the NiII-Ph bond. These calculation results can improve our understanding of the mechanism of the carboxylation process and the multifaceted roles of metal additive Zn0 and provide theoretical guidance for improving the carboxylation reaction.
RESUMO
The mechanism of the Ni-Al bimetallic-catalyzed C-H cyclization to construct tricyclic imidazoles is investigated using density functional theory calculations. The calculation result shows that the reaction mechanism involves sequential steps of substrate coordination, ligand-to-ligand hydrogen transfer (LLHT), and C-C reductive elimination to produce the final product tricyclic imidazole. The LLHT step is calculated to be the rate-determining step. The oxidative addition of the benzimidazole C-H bond to the Ni center and the insertion of the alkene into the Ni-H bond occur concertedly in the LLHT step. The effects of N-heterocyclic carbene (NHC) ligands and AlMe3 on the reactivity and regioselectivity were also analyzed. These calculation results shed light on some ambiguous suggestions from experiments.
RESUMO
Intelligent molecular machines that are driven by light, electricity, and temperature have attracted considerable interest in the fields of chemistry, materials, and biology. Herein, a unimolecular chiral stepping inversion molecular machine (SIMM) was constructed by a coupling reaction between dibromo pillar[5]arene and a tetrathiafulvalene (TTF) derivative (PT3 and PT5). Compared with the longer aliphatic linker PT5, PT3 with a shorter aliphatic linker shows chiral stepping inversion, achieving chiral inversion under a two-electron redox potential. Benefiting from the successive reversible two-electron redox potential of TTF, the self-exclusion and self-inclusion conformational transformations of SIMM can proceed in two steps under redox, leading to the chirality step inversion in the pillar[5]arene core. Electrochemical experiments and circular dichroism (CD) spectra show that the redox processes can cause SIMM CD signaling to reversibly switch. More importantly, as the oxidant Fe(ClO4)3 was increased from 0.1 to 1 equiv, the CD spectral signal of SIMM disappeared at 1 equiv, and further addition of Fe(ClO4)3 resulted in the CD signal reversed from positive to negative at 309 nm, indicating that the chirality was reversed after chemical oxidation and reached a negative maximum with the addition of 2 equiv Fe(ClO4)3; thus, redox-triggered chiral stepping inversion was achieved. Furthermore, the chiral inversion can be restored to its original state after the addition of 2 equiv of reducing agent, sodium ascorbate. This work demonstrates unimolecular chiral stepping inversion, providing a new perspective on stimulus-responsive chirality in molecular machines.
RESUMO
Persistent organic pollutants (POPs) exist widely in the environment and place significant impact on human health by bioaccumulation. Efficient recognition of POPs and their removal are highly challenging tasks because their specific structures interact often very weakly with the capture materials. Herein, a molecular nanocage (1) is studied as an efficient sensing and sorbent material for POPs, which is demonstrated by a representative and stable perfluorooctane sulfonate (PFOS) substrate containing a hydrophilic sulfonic group and a hydrophobic fluoroalkyl chain. A highly sensitive and unusual turn-on fluorescence response within 10 s and a 97% total removal of PFOS from water in 20 min have been achieved owing to the strong host-guest interactions between 1 and PFOS. The binding constant of 1 to PFOS is 2 orders of magnitude higher than state-of-the-art adsorbents for PFOS and thus represents a new benchmark material for the recognition and removal of PFOS. The host-guest interaction has been elucidated by solid-state NMR spectroscopy and single-crystal X-ray diffraction, which provide key insights at a molecular level for the design of new advanced sensing/sorbent materials for POPs.
Assuntos
Ácidos Alcanossulfônicos , Poluentes Ambientais , Fluorocarbonos , Poluentes Químicos da Água , Humanos , Poluentes Orgânicos Persistentes , Poluentes Químicos da Água/química , Adsorção , Poluentes Ambientais/química , Água , Fluorocarbonos/química , Ácidos Alcanossulfônicos/químicaRESUMO
The mechanism of iron-catalyzed intramolecular [2 + 2] cycloaddition and cycloisomerization of enyne acetates has been investigated with DFT computations. Both mechanisms start the catalytic cycle from the stepwise 1,2-acyloxy migration to afford the iron carbene. The [2 + 2] cycloaddition mechanism involves subsequent key steps of [2 + 2] cycloaddition, 1,2-acyloxy migration, and reductive elimination to generate the azabicyclo [3.2.0] heptane product, with the reductive elimination being the rate-determining step. The cycloisomerization mechanism involves subsequent key steps of [2 + 2] cycloaddition, stepwise 1,4-acyloxy migration to produce the allenylpyrrolidine product, with the 1,4-acyloxy migration being the rate-determining step. Reaction potential energy surfaces for two model substrates that have or do not have alkene-terminal substituents have been investigated and the origins of the selectivities have been disclosed. Moreover, energy profiles with three possible spin states (SFe = 0, 1, 2) have been considered. The reaction is suggested to occur mainly on the singlet potential energy surface with a few spin crossovers between singlet and triplet states involved, which indicates that this reaction should have two-state reactivity (TSR).
RESUMO
Methods for C-H cyanation of pyridines are rare. Here, we report a method for C3-selective cyanation of pyridines by a tandem process with the reaction of an in situ generated dihydropyridine with a cyano electrophile as the key step. The method is suitable for late-stage functionalization of pyridine drugs. The low reduction potential of the electrophile and effective transfer of the nitrile group were found to be essential for the success of this method. We studied the reaction mechanism in detail by means of control experiments and theoretical calculations and found that a combination of electronic and steric factors determined the regioselectivity of reactions involving C2-substituted pyridines.
RESUMO
The utilization of azobenzene-based photoisomerization cannot only control the morphology of supramolecular assemblies, but can also regulate many biological processes. However, the design of azobenzene-involved nanoconstructs with switchable photoluminescence remains challenging because of the light-quenching ability of azobenzene. Herein, an azobenzene-derived multicomponent nanosystem is reported and its function as a supramolecular lanthanide photoswitch is explored. The metal chelation between lanthanide ions (Ln3+ = Eu3+ and Tb3+ ) and 2,6-pyridinedicarboxylic acid is utilized as the light-emitting center but its inherent fluorescence emission is completely suppressed via the disordered motion of the adjoining azophenyl unit. Interestingly, the hydrophobic cavity of α-cyclodextrin can provide a confined microenvironment to immobilize the molecular conformation of trans-azobenzene, thus leading to the recovery of characteristic lanthanide luminescence both in aqueous solution and the hydrogel state. Also, the luminescence can be reversibly turned off when the cis-azobenzene is expelled from the cavity of α-cyclodextrin upon alternating light irradiation. This mutual cooperation arising from host-guest complexation and metal-ligand coordination confers the desired photoswitchable luminescence abilities on the commonly used azobenzenes, which may hold great promise in the creation of more advanced light-responsive smart materials.
Assuntos
Ciclodextrinas , Elementos da Série dos Lantanídeos , alfa-Ciclodextrinas , Ciclodextrinas/química , Elementos da Série dos Lantanídeos/química , Luminescência , Conformação MolecularRESUMO
Regulation of physio-chemical properties and reaction activities via noncovalent methodology has become one of increasingly significant topics in supramolecular chemistry and showed inventive applications in miscellaneous fields. Herein, we demonstrate that sulfonated crown ether can form very stable host-guest complexes with a series of push-pull-type photosensitizers, eventually leading to the dramatic fluorescence enhancement in visible and near-infrared regions. Meanwhile, severe suppression in singlet oxygen (1 O2 ) production is found, mainly due to the higher energy barriers between the excited single and triple states upon host-guest complexation. Moreover, such complexation-induced tuneable 1 O2 generation systems has been utilized in adjusting the photochemical oxidation reactions of polycyclic aromatic hydrocarbons (anthracene) and sulfides ((methylthio)benzene) in water. This supramolecularly controlled photooxidation based on the selective molecular binding of crown ether with photosensitizers may provide a feasible and applicable strategy for monitoring and modulating many photocatalysis processes in aqueous phase.
Assuntos
Éteres de Coroa , Éteres de Coroa/química , Fármacos Fotossensibilizantes/química , Oxigênio Singlete , Água/químicaRESUMO
BACKGROUND The high rate of malignancy of peritoneal carcinomatosis makes its accurate detection vital in treatment planning. The combination of anatomical and functional information, provided by T2-weighted imaging (T2WI) and diffusion-weighted imaging (DWI), respectively, could potentially aid in the segmentation of tumors. The aim of this study was to compare the functional tumor volume estimated by a T2WI- and DWI-derived apparent diffusion coefficient (ADC) map, with metabolic tumor volume measured by 18F-fluoro-deoxyglucose positron emission tomography with computed tomography (FDG PET/CT). MATERIAL AND METHODS In 108 lesions from 108 patients with peritoneal carcinomatosis, gross tumor volume (GTV) was manually delineated on DWI. Within each region of interest, k-means clustering was used to exclude non-tumorous tissue from tumorous tissue. The high-cellularity tumor volume estimated from ADC (HCTVADC) and combined high-cellularity tumor volume (HCTVC), which was estimated by combining anatomical information from T2WI and functional information from ADC, were generated. Taking metabolic tumor volume (MTV) in PET/CT as a reference, GTV, HCTVADC, and HCTVC were compared with MTV. RESULTS GTV (P=0.017) and HCTVADC (P=0.048) differed significantly from MTV. However, the HCTVC measured by combining DWI and T2WI showed high concordance (ICC=0.99) with the MTV measured by FDG PET/CT in differentiating tumorous tissues with high cellularity from non-tumorous tissues. CONCLUSIONS In conclusion, our results suggested the potential value of this semiautomatic method serving as an alternative to PET/CT in radiotherapy tumor contouring.
Assuntos
Neoplasias Peritoneais , Tomografia por Emissão de Pósitrons combinada à Tomografia Computadorizada , Imagem de Difusão por Ressonância Magnética/métodos , Fluordesoxiglucose F18 , Humanos , Neoplasias Peritoneais/diagnóstico por imagem , Tomografia por Emissão de Pósitrons/métodos , Compostos RadiofarmacêuticosRESUMO
A series of solid supramolecules based on acrylamide-phenylpyridium copolymers with various substituent groups (P-R: R=-CN, -CO2 Et, -Me, -CF3 ) and cucurbit[7]uril (CB[7]) are constructed to exhibit tunable second-level (from 0.9â s to 2.2â s) room-temperature phosphorescence (RTP) in the amorphous state. Compared with other solid supramolecules P-R/CB[7] (R=-CN, -CO2 Et, -Me), P-CF3 /CB[7] displays the longest lifetime (2.2â s), which is probably attributed to the fluorophilic interaction of cucurbiturils leading to a uncommon host-guest interaction between 4-phenylpyridium with -CF3 and CB[7]. Furthermore, the RTP solid supramolecular assembly (donors) can further react with organic dyes Eosin Y or SR101 (acceptors) to form ternary supramolecular systems featuring ultralong phosphorescence energy transfer (PpET) and visible delayed fluorescence (yellow for EY at 568â nm and red for SR101 at 620â nm). Significantly, the ultralong multicolor PpET supramolecular assembly can be further applied in fields of anti-counterfeiting and information encryption and painting.
RESUMO
Allenes are versatile synthons in organic synthesis and medicinal chemistry because of their diverse reactivities. Catalytic 1,4-hydrosilylation of 1,3-enynes may present the straightforward strategy for synthesis of silylallenes. However, the transition-metal-catalyzed reaction has not been successful due to poor selectivity and very limited substrate scopes. We report here the efficient and selective 1,4-hydrosilylation of branched 1,3-enynes enabled by the ene-diamido rare-earth ate catalysts using both alkyl and aryl hydrosilanes, leading to the exclusive formation of tetrasubstituted silylallenes. Deuteration reaction, kinetic study, and DFT calculations were conducted to investigate the possible mechanism, revealing crucial roles of high Lewis acidity, large ionic radius, and ate structure of the rare-earth catalysts.
RESUMO
The construction of host-guest-binding-induced phosphorescent supramolecular assemblies has become one of increasingly significant topics in biomaterial research. Herein, we demonstrate that the cucurbit[8]uril host can induce the anthracene-conjugated bromophenylpyridinium guest to form a linear supramolecular assembly, thus facilitating the enhancement of red fluorescence emission by the host-stabilized charge-transfer interactions. When the anthryl group is photo-oxidized to anthraquinone, the obtained linear nanoconstructs can be readily converted into the homoternary inclusion complex, accompanied by the emergence of strong green phosphorescence in aqueous solution. More intriguingly, dual organelle-targeted imaging abilities have been also distinctively achieved in nuclei and lysosomes after undergoing photochemical reaction upon UV irradiation. This photooxidation-driven purely organic room-temperature phosphorescence provides a convenient and feasible strategy for supramolecular organelle identification to track specific biospecies and physiological events in the living cells.
RESUMO
For nearly 30 years, considerable research effort has been focused on the development of methods for catalytic (3 + 2) cycloaddition reactions of palladium-oxyallyl species with alkenes. However, because C-O bond formation is kinetically favored, the (3 + 2) cycloadditions achieved to date have involved C-O reductive elimination. We herein report a method of lithium triflate-promoted (3 + 2) cycloaddition reactions of palladium-oxyallyl species with 1,3-dienes that proceed via a pathway terminated with C-C bond formation to give a five-membered carbocycle. Coordination of the lithium ion with the alkoxide moiety disrupts the C-O reductive elimination and forms a metal-enolate tethered π-allyl-Pd. The π-allyl-Pd moiety then accepts intramolecular allylic attack from the enolate moiety to form carbocyclic products. Furthermore, by tuning the steric properties of the palladium ligand, we could also accomplish the competing (4 + 3) cycloadditions, and thus this method provides regiodivergent access to both cyclopentanones and cycloheptanones. The reaction mechanism was investigated by DFT calculation and the origins of the regioselectivities of the cycloaddition were rationalized.
RESUMO
Two-photon supramolecular assembly with near-infrared (NIR) fluorescence emission is constructed from tetraphenylethene derivative possessing methoxyl and vinyl pyridine salt (TPE-2SP), cucurbit[8]uril (CB[8]), and ß-cyclodextrin modified hyaluronic acid (HA-CD). The obtained experimental results indicate that the TPE-2SP exhibits a very weak fluorescence emission at 650 nm, and then complexes with cucurbit[7]uril (CB[7]) to form 1:2 supramolecular pseudorotaxane with an enhanced NIR fluorescence emission at 660 nm. Compared with CB[7], CB[8] can assemble with TPE-2SP to be two-axial netlike pseudopolyrotaxane, resulting in close packing to increase TPE-2SP fluorescence emission with a redshift of 30 nm. Interestingly, TPE-2SP/CB[8] continues to assemble with cancer cell targeting agent HA-CD into nanoparticles, leading to assembling-induced further enhancement of NIR emission. Surprisingly, supramolecular nanoparticles have the two-photon character, and are successfully applied to mitochondrial targeting imaging. This supramolecular assembly system, with two-photon absorption and assembly-induced enhanced NIR luminescence properties, opens new way for biological targeted imaging.
Assuntos
Nanopartículas , Humanos , Ácido Hialurônico , Luminescência , Mitocôndrias , PolímerosRESUMO
Herein, we report a protocol for PtI2-catalyzed formal three-component cascade cycloaddition reactions between γ-aminoalkynes and electron-deficient alkynes to afford highly substituted cyclohexadiene-b-pyrrolidines in good yields. On the basis of the results of the control experiments and density functional theory calculations, we present a plausible mechanism that proceeds via two key intermediates. The overall transformation involves the cleavage and formation of multiple C-C and C-N bonds and a previously unreported reaction mode of a seven-membered nitrogen heterocyclic intermediate.
RESUMO
Coordination compounds are well-known compounds that are being used as new materials for lithium storage because of their unique advantages, that is, designable structures, abundant active sites, and facile as well as mild synthetic routes. However, the electrode stability, low rate performance, and cycle life of coordination compounds are currently the main issues preventing their application as electrode materials, and the lithium-storage mechanism in coordination networks is not well understood. Herein, isostructural one-dimensional coordination compounds were synthesized to study their lithium-storage performance. Co-HIPA and Ni-HIPA showed superior electrolyte stability than other M-HIPAs, and Co-HIPA displayed a superior reversible capacity and cycle stability, excellent rate performance, and clear voltage platform. DFT calculations and kinetic analysis revealed the influence of the metal center with different electronic structures on the lithium-storage mechanism.