RESUMO
Fusarium verticillioides is one of the most important fungal pathogens causing maize ear and stalk rots, thereby undermining global food security. Infected seeds are usually unhealthy for consumption due to contamination with fumonisin B1 (FB1) mycotoxin produced by the fungus as a virulence factor. Unveiling the molecular factors that determine fungal development and pathogenesis will help in the control and management of the diseases. Kex2 is a kexin-like Golgi-resident proprotein convertase that is involved in the activation of some important proproteins. Herein, we identified and functionally characterized FvKex2 in relation to F. verticillioides development and virulence by bioinformatics and functional genomics approaches. We found that FvKex2 is required for the fungal normal vegetative growth, because the growth of the ∆Fvkex2 mutant was significantly reduced on culture media compared to the wild-type and complemented strains. The mutant also produced very few conidia with morphologically abnormal shapes when compared with those from the wild type. However, the kexin-like protein was dispensable for the male role in sexual reproduction in F. verticillioides. In contrast, pathogenicity was nearly abolished on wounded maize stalks and sugarcane leaves in the absence of FvKEX2 gene, suggesting an essential role of Fvkex2 in the virulence of F. verticillioides. Furthermore, high-performance liquid chromatography analysis revealed that the ∆Fvkex2 mutant produced a significantly lower level of FB1 mycotoxin compared to the wild-type and complemented strains, consistent with the loss of virulence observed in the mutant. Taken together, our results indicate that FvKex2 is critical for vegetative growth, FB1 biosynthesis, and virulence, but dispensable for sexual reproduction in F. verticillioides. The study presents the kexin-like protein as a potential drug target for the management of the devastating maize ear and stalk rot diseases. Further studies should aim at uncovering the link between FvKex2 activity and FB1 biosynthesis genes. KEY POINTS: â¢The kexin-like protein FvKex2 contributes significantly to the vegetative growth of Fusarium verticillioides. â¢The conserved protein is required for fungal conidiation and conidial morphology, but dispensable for sexual reproduction. â¢Deletion of FvKEX2 greatly attenuates the virulence and mycotoxin production potential of F. verticillioides.
Assuntos
Fumonisinas , Fusarium , Micotoxinas , Masculino , Humanos , Micotoxinas/genética , VirulênciaRESUMO
Photocatalytic CO2 reduction into ideal hydrocarbon fuels, such as CH4 , is a sluggish kinetic process involving adsorption of multiple intermediates and multi-electron steps. Achieving high CH4 activity and selectivity therefore remains a great challenge, which largely depends on the efficiency of photogenerated charge separation and transfer as well as the intermediate energy levels in CO2 reduction. Herein, we construct La and Cu dual-atom anchored carbon nitride (LaCu/CN), with La-N4 and Cu-N3 coordination bonds connected by Cu-N-La bridges. The asymmetric Cu-N-La species enables the establishment of an atomic-level donor-acceptor structure, which allows the migration of electrons from La atoms to the reactive Cu atom sites. Simultaneously, intermediates during CO2 reduction on LaCu/CN demonstrate thermodynamically more favorable process for CH4 formation based on theoretical calculations. Eventually, LaCu/CN exhibits a high selectivity (91.6 %) for CH4 formation with a yield of 125.8â µmol g-1 , over ten times of that for pristine CN. This work presents a strategy for designing multi-functional dual-atom based photocatalysts.
RESUMO
Graphite (Gr)-based lithium-ion batteries with admirable electrochemical performance below -20 °C are desired but are hindered by sluggish interfacial charge transport and desolvation process. Li salt dissociation via Li+-solvent interaction enables mobile Li+ liberation and contributes to bulk ion transport, while is contradictory to fast interfacial desolvation. Designing kinetically-stable solid electrolyte interphase (SEI) without compromising strong Li+-solvent interaction is expected to compatibly improve interfacial charge transport and desolvation kinetics. However, the relationship between physicochemical features and temperature-dependent kinetics properties of SEI remains vague. Herein, we propose four key thermodynamics parameters of SEI potentially influencing low-temperature electrochemistry, including electron work function, Li+ transfer barrier, surface energy, and desolvation energy. Based on the above parameters, we further define a novel descriptor, separation factor of SEI (SSEI), to quantitatively depict charge (Li+/e-) transport and solvent deprivation processes at Gr/electrolyte interface. A Li3PO4-based, inorganics-enriched SEI derived by Li difluorophosphate (LiDFP) additive exhibits the highest SSEI (4.89×103) to enable efficient Li+ conduction, e- blocking and rapid desolvation, and as a result, much suppressed Li-metal precipitation, electrolyte decomposition and Gr sheets exfoliation, thus improving low-temperature battery performances. Overall, our work originally provides visualized guides to improve low-temperature reaction kinetics/thermodynamics by constructing desirable SEI chemistry.
RESUMO
Selenium (Se), the world's oldest optoelectronic material, has been widely applied in various optoelectronic devices such as commercial X-ray flat-panel detectors and photovoltaics. However, despite the rare and widely-dispersed nature of Se element, a sustainable recycling of Se and other valuable materials from spent Se-based devices has not been developed so far. Here a sustainable strategy is reported that makes use of the significantly higher vapor pressure of volatile Se compared to other functional layers to recycle all of them from end-of-life Se-based devices through a closed-space evaporation process, utilizing Se photovoltaic devices as a case study. This strategy results in high recycling yields of ≈ 98% for Se and 100% for other functional materials including valuable gold electrodes and glass/FTO/TiO2 substrates. The refabricated photovoltaic devices based on these recycled materials achieve an efficiency of 12.33% under 1000-lux indoor illumination, comparable to devices fabricated using commercially sourced materials and surpassing the current indoor photovoltaic industry standard of amorphous silicon cells.
RESUMO
Carbon dots (CDs) with positive surface charges are considered one of the encouraging nanomedications for antibacterial applications. However, due to the distinctive membrane structure of Gram-negative bacteria, cationic CDs with relatively high concentrations are usually required for effective treatment, which might bring out serious safety issues at high doses. Therefore, it is of substantial significance to improve the killing efficiency of cationic CDs on Gram-negative bacteria at appropriately low concentrations. In this work, optimized cationic CDs (bPEI25â¯000-CDs) were prepared via a hydrothermal method with citric acid and branched PEI25000, which offered a positive surface potential, elimination abilities against Escherichia coli, and relatively high biosafety. The optimized bPEI25â¯000-CDs can further assemble with the clinical photodynamic therapy (PDT) drug 5-aminolevulinic acid (5-ALA) through electrostatic interaction. Moreover, compared with bPEI25â¯000-CDs and 5-ALA, the bacterial survival rate was significantly reduced by the ALA-bPEI25â¯000-CD-induced PDT effect. Even when the dose of bPEI25â¯000-CD carrier was halved, the bacterial survival could be reduced by 44.4% after light exposure compared to those incubated in the dark. The investigation of the bacterial morphology, membrane potential, and intracellular ROS production suggested that the enhanced antibacterial activity may be due to the membrane dysfunction and cell damage resulting from the high interaction between positively charged ALA-bPEI25â¯000-CDs and the bacterial cell membrane. Meanwhile, the cationic ALA-bPEI25â¯000-CDs may facilitate the cellular uptake of 5-ALA, resulting in a more efficient PDT effect. In summary, the antibacterial strategy proposed in this study will provide a novel approach for expanding the application of CD-based nanomedications.
RESUMO
Nanoclusters with atomically precise structures and discrete energy levels are considered as nanoscale semiconductors for artificial intelligence. However, nanocluster electronic engineering and optoelectronic behavior have remained obscure and unexplored. Hence, we create nanocluster photoreceptors inspired by mantis shrimp visual systems to satisfy the needs of compact but multi-task vision hardware and explore the photo-induced electronic transport. Wafer-scale arrayed photoreceptors are constructed by a nanocluster-conjugated molecule heterostructure. Nanoclusters perform as an in-sensor charge reservoir to tune the conductance levels of artificial photoreceptors by a light valve mechanism. A ligand-assisted charge transfer process takes place at nanocluster interface and it features an integration of spectral-dependent visual adaptation and circular polarization recognition. This approach is further employed for developing concisely structured, multi-task, and compact artificial visual systems and provides valuable guidelines for nanocluster neuromorphic devices.
RESUMO
Fungal pathogens such as Candida albicans pose a significant threat to human health with limited treatment options available. One strategy to expand the therapeutic target space is to identify genes important for pathogen growth in host-relevant environments. Here, we leverage a pooled functional genomic screening strategy to identify genes important for fitness of C. albicans in diverse conditions. We identify an essential gene with no known Saccharomyces cerevisiae homolog, C1_09670C, and demonstrate that it encodes subunit 3 of replication factor A (Rfa3). Furthermore, we apply computational analyses to identify functionally coherent gene clusters and predict gene function. Through this approach, we predict the cell-cycle-associated function of C3_06880W, a previously uncharacterized gene required for fitness specifically at elevated temperatures, and follow-up assays confirm that C3_06880W encodes Iml3, a component of the C. albicans kinetochore with roles in virulence in vivo. Overall, this work reveals insights into the vulnerabilities of C. albicans.
RESUMO
Abstract Objectives: We aimed to explore the risk factors and countermeasures of stress urinary incontinence (SUI) after mesh implantation for patients with pelvic organ prolapse (POP). Methods: A total of 224 POP patients undergoing mesh implantation from January 2018 to December 2021 were divided into group A (n = 68, postoperative new-onset SUI) and group B (n = 156, without postoperative new-onset SUI). Their clinical data were collected, and the treatment outcomes were analyzed. The independent risk factors for postoperative new-onset SUI were determined through multivariate logistic regression analysis. A risk-scoring model was established and assessed. The patients with postoperative new-onset SUI were divided into low-, moderate- and high-risk groups using this model. Results: Mesh implantation significantly improved the pelvic floor muscle strength and function of patients. Multivariate logistic regression analysis revealed that age ≥50 years old, gravidity ≥3 times, parity ≥3 times, history of macrosomia delivery, history of chronic respiratory diseases, vaginal delivery, and perineal laceration were independent risk factors for postoperative new-onset SUI, and pelvic floor muscle training by biofeedback electrical stimulation was a protective factor (p < 0.05). The risk-scoring model was safe, reliable and practical, with high discrimination, accuracy and efficiency. Conclusions: Age ≥50 years old, gravidity ≥3 times, parity ≥3 times, history of macrosomia delivery, history of chronic respiratory diseases, vaginal delivery, and perineal laceration are independent risk factors for postoperative new-onset SUI, and pelvic floor muscle training by biofeedback electrical stimulation is a protective factor. Therefore, POP patients with new-onset SUI following mesh implantation should receive more pelvic floor muscle training (AU)