Long-range ordered porous carbons produced from C60.

Carbon structures with covalent bonds connecting C60 molecules have been reported1-3, but their production methods typically result in very small amounts of sample, which restrict the detailed characterization and exploration necessary for potential applications. We report the gram-scale preparation of a new type of carbon, long-range ordered porous carbon (LOPC), from C60 powder catalysed by α-Li3N at ambient pressure. LOPC consists of connected broken C60 cages that maintain long-range periodicity, and has been characterized by X-ray diffraction, Raman spectroscopy, magic-angle spinning solid-state nuclear magnetic resonance spectroscopy, aberration-corrected transmission electron microscopy and neutron scattering. Numerical simulations based on a neural network show that LOPC is a metastable structure produced during the transformation from fullerene-type to graphene-type carbons. At a lower temperature, shorter annealing time or by using less α-Li3N, a well-known polymerized C60 crystal forms owing to the electron transfer from α-Li3N to C60. The carbon K-edge near-edge X-ray absorption fine structure shows a higher degree of delocalization of electrons in LOPC than in C60(s). The electrical conductivity is 1.17 × 10-2 S cm-1 at room temperature, and conduction at T < 30 K appears to result from a combination of metallic-like transport over short distances punctuated by carrier hopping. The preparation of LOPC enables the discovery of other crystalline carbons starting from C60(s).

Spectroscopic evidence of spin-state excitation in d-electron correlated semiconductor FeSb2.

Iron antimonide (FeSb2) has been investigated for decades due to its puzzling electronic properties. It undergoes the temperature-controlled transition from an insulator to an ill-defined metal, with a cross-over from diamagnetism to paramagnetism. Extensive efforts have been made to uncover the underlying mechanism, but a consensus has yet to be reached. While macroscopic transport and magnetic measurements can be explained by different theoretical proposals, the essential spectroscopic evidence required to distinguish the physical origin is missing. In this paper, through the use of X-ray absorption spectroscopy and atomic multiplet simulations, we have observed the mixed spin states of 3d 6 configuration in FeSb2. Furthermore, we reveal that the enhancement of the conductivity, whether induced by temperature or doping, is characterized by populating the high-spin state from the low-spin state. Our work constitutes vital spectroscopic evidence that the electrical/magnetical transition in FeSb2 is directly associated with the spin-state excitation.

p73α1, a p73 C-terminal isoform, regulates tumor suppression and the inflammatory response via Notch1.

p73, a p53 family member, undergoes alternative splicing at the 3' end to produce multiple isoforms, but their expression and activity are largely unknown. Thus, CRISPR was used to knock out exon 12 (E12) in human cancer cell lines and mice, leading to isoform switch from p73α to isoform p73α1. We found that p73α1 is naturally expressed and induced by DNA damage. We also found that knockout of E12 suppresses cell growth and migration in H1299 and MIA PaCa-2 cells and promotes cellular senescence in mouse embryonic fibroblasts. Similarly, ectopic expression of p73α1 suppresses cell proliferation, whereas knockdown of p73α1 restores the cell proliferative and migratory capacities of E12−/− cells. Consistently, we found that E12+/− mice are not prone to spontaneous tumors. Instead, E12+/− mice are prone to systemic inflammation and exhibit elevated TNFα expression in inflamed tissues. Moreover, we found that Notch1, a master regulator of the inflammatory response, is regulated by p73α1 and highly expressed in E12−/− cells and inflamed E12+/− mouse tissues. Furthermore, through knockdown of p73α1 and/or Notch1 in E12−/− cells, we found that Notch1 is necessary for p73α1-mediated growth suppression. Together, these data suggest that p73α1 plays a critical role in tumor suppression and the inflammatory response via Notch1.

Selective Photoreduction of CO2 to CH4 Triggered by Metal-Vacancy Pair Sites.

Selectively achieving the photoreduction of carbon dioxide (CO2) to methane (CH4) remains a significant challenge, which primarily arises from the complexity of the protonation process. In this work, we designed metal-vacancy pair sites in defective metal oxide semiconductors, which anchor the reactive intermediates with a bridged linkage for the selective protonation to produce CH4. As an example, oxygen-deficient Nb2O5 nanosheets are synthesized, in which the niobium-oxygen vacancy pair sites are demonstrated by X-ray photoelectron spectroscopy and electron paramagnetic resonance spectra. In situ Fourier transform infrared spectroscopy monitors the *CH3O intermediate, a key intermediate for CH4 production, during the CO2 photoreduction in oxygen-deficient Nb2O5 nanosheets. Importantly, the built metal-vacancy pair sites regulate the *CH3O formation step as a spontaneous process, making the reduction of CO2 to CH4 the preferred method. Therefore, the oxygen-deficient Nb2O5 nanosheets exhibit a CH4 formation rate of 19.14 µmol g-1 h-1, with an electron selectivity of ∼94.1%.

Nitrogen Doping-Roused Synergistic Active Sites in Perovskite Enabling Highly Selective CO2 Photoreduction into CH4.

The intricate protonation process in carbon dioxide reduction usually makes the product unpredictable. Thus, it is significant to control the reactive intermediates to manipulate the reaction steps. Here, we propose that the synergistic La-Ti active sites in the N-La2Ti2O7 nanosheets enable the highly selective carbon dioxide photoreduction into methane. In the photoreduction of CO2 over N-La2Ti2O7 nanosheets, in situ Fourier transform infrared spectra are utilized to monitor the *CH3O intermediate, pivotal for methane production, whereas such monitoring is not conducted for La2Ti2O7 nanosheets. Also, theoretical calculations testify to the increased charge densities on the Ti and La atoms and the regulated formation energy barrier of *CO and *CH3O intermediates by the constructed synergistic active sites. Accordingly, the methane formation rate of 7.97 µL h-1 exhibited by the N-La2Ti2O7 nanosheets, along with an electron selectivity of 96.6%, exceeds that of most previously reported catalysts under similar conditions.

Tunable Magnetism in Atomically Thin Itinerant Antiferromagnet with Room-Temperature Ferromagnetic Order.

Addressing the need for modulated spin configurations is crucial, as they serve as the foundational building blocks for next-generation spintronics, particularly in atomically thin structures and at room temperature. In this work, we realize intrinsic ferromagnetism in monolayer flakes and tunable ferro-/antiferromagnetism in (Fe0.56Co0.44)5GeTe2 antiferromagnets. Remarkably, the ferromagnetic ordering (≥1 L) and antiferromagnetic ordering (≥4 L) remain discernible up to room temperature. The TC (∼310 K) of the monolayer flakes sets a record high for known exfoliated monolayer van der Waals magnets. Within the framework of A-type antiferromagnetism, a notable odd-even layer-number effect at elevated temperatures (T = 150 K) is observed. Of particular interest is the strong ferromagnetic order in even-layer flakes at low temperatures. The intricate interplay among magnetic field strength, layer number, and temperature gives rise to a diverse array of phenomena, holding promise not only for new physics but also for practical applications.

Ferredoxin reductase is critical for p53-dependent tumor suppression via iron regulatory protein 2.

Ferredoxin reductase (FDXR), a target of p53, modulates p53-dependent apoptosis and is necessary for steroidogenesis and biogenesis of iron-sulfur clusters. To determine the biological function of FDXR, we generated a Fdxr-deficient mouse model and found that loss of Fdxr led to embryonic lethality potentially due to iron overload in developing embryos. Interestingly, mice heterozygous in Fdxr had a short life span and were prone to spontaneous tumors and liver abnormalities, including steatosis, hepatitis, and hepatocellular carcinoma. We also found that FDXR was necessary for mitochondrial iron homeostasis and proper expression of several master regulators of iron metabolism, including iron regulatory protein 2 (IRP2). Surprisingly, we found that p53 mRNA translation was suppressed by FDXR deficiency via IRP2. Moreover, we found that the signal from FDXR to iron homeostasis and the p53 pathway was transduced by ferredoxin 2, a substrate of FDXR. Finally, we found that p53 played a role in iron homeostasis and was required for FDXR-mediated iron metabolism. Together, we conclude that FDXR and p53 are mutually regulated and that the FDXR-p53 loop is critical for tumor suppression via iron homeostasis.

Two-Step Catalytic Against Polysulfide Shuttling to Enhance Redox Conversion for Advanced Lithium-Sulfur Batteries.

The development of lithium-sulfur batteries is seriously hindered by the shuttle effect of lithium polysulfides (LiPSs) and the low electrical conductivity of sulfur. To solve these problems, efficient catalysts can be used to improve the conversion rate of LiPSs and the conductivity of sulfur cathode. Herein, annealed melamine foam supported MoSe2 (NCF@MoSe2) is used as interlayer and the MoSe2/MoP heterojunction obtained by phosphating MoSe2 is further used as the catalyst material for metal fusion with a sulfur element. The interlayer can not only improve the electrical conductivity and effectively adsorb and catalyze LiPSs, but more importantly, the MoSe2/MoP heterojunction can also effectively adsorb and catalyze LiPSs, so that the batteries have a dual inhibition shuttling effect strategy. Furthermore, the rapid anchor-diffusion transition of LiPSs, and the suppression of shuttling effects by catalyst materials are elucidated using theoretical calculations and in situ Raman spectroscopy. The two-step catalytic strategy exhibits a high reversibility of 983 mAh g-1 after 200 cycles at 0.5 C and a high-rate capacity of 889 mAh g-1 at 5 C. This work provides a feasible solution for the rational design of interlayer and heterojunction materials and is also conducive to the development of more advanced Li-S batteries.

Modulation of Buried Interface by 1-(3-aminopropyl)-Imidazole for Efficient Inverted Formamidinium-Cesium Perovskite Solar Cells.

Considering the direct influence of substrate surface nature on perovskite (PVK) film growth, buried interfacial engineering is crucial to obtain ideal perovskite solar cells (PSCs). Herein, 1-(3-aminopropyl)-imidazole (API) is introduced at polytriarylamine (PTAA)/PVK interface to modulate the bottom property of PVK. First, the introduction of API improves the growth of PVK grains and reduces the Pb2+ defects and residual PbI2 present at the bottom of the film, contributing to the acquisition of high-quality PVK film. Besides, the presence of API can optimize the energy structure between PVK and PTAA, which facilitates the interfacial charge transfer. Density functional theory (DFT) reveals that the electron donor unit (R-C ═ N) of the API prefers to bind with Pb2+ traps at the PVK interface, while the formation of hydrogen bonds between the R-NH2 of API and I- strengthens the above binding ability. Consequently, the optimum API-treated inverted formamidinium-cesium (FA/Cs) PSCs yields a champion power conversion efficiency (PCE) of 22.02% and exhibited favorable stability.

Defective Tungsten Oxides with Stacking Faults for Proton Exchange Membrane Green-Hydrogen Generation.

Defects can introduce atomic structural modulation and tailor performance of materials. Herein, it demonstrates that semiconductor WO3 with inert electrocatalytic behavior can be activated through defect-induced tensile strains. Structural characterizations reveal that when simply treated in Ar/H2 atmosphere, oxygen vacancies will generate in WO3 and cause defective structures. Stacking faults are found in defects, thus modulating electronic structure and transforming electrocatalytic-inert WO3 into highly active electrocatalysts. Density functional theory (DFT) calculations are performed to calculate *H adsorption energies on various WOx surfaces, revealing the oxygen vacancy composition and strain predicted to optimize the catalytic activity of hydrogen evolution reaction (HER). Such defective tungsten oxides can be integrated into commercial proton exchange membrane (PEM) electrolyser with comparable performance toward Pt-based PEM. This work demonstrates defective metal oxides as promising non-noble metal catalysts for commercial PEM green-hydrogen generation.

Selective CO2 Photoreduction Enabled by Water-stable Cu-based Metal-organic Framework Nanoribbons.

The goal of photocatalytic CO2 reduction system is to achieve near 100 % selectivity for the desirable product with reasonably high yield and stability. Here, two-dimensional metal-organic frameworks are constructed with abundant and uniform monometallic active sites, aiming to be an emerged platform for efficient and selective CO2 reduction. As an example, water-stable Cu-based metal-organic framework nanoribbons with coordinatively unsaturated single CuII sites are first fabricated, evidenced by X-ray diffraction patterns and X-ray absorption spectroscopy. In situ Fourier-transform infrared spectra and Gibbs free energy calculations unravel the formation of the key intermediate COOH* and CO* is an exothermic and spontaneous process, whereas the competitive hydrogen evolution reaction is endothermic and non-spontaneous, which accounts for the selective CO2 reduction. As a result, in an aqueous solution containing 1 mol L-1 KHCO3 and without any sacrifice reagent, the water-stable Cu-based metal-organic framework nanoribbons exhibited an average CO yield of 82 µmol g-1 h-1 with the selectivity up to 97 % during 72 h cycling test, which is comparable to other reported photocatalysts under similar conditions.

Atomically Strained Metal Sites for Highly Efficient and Selective Photooxidation.

Strain engineering is an attractive strategy for improving the intrinsic catalytic performance of heterogeneous catalysts. Manipulating strain on the short-range atomic scale to the local structure of the catalytic sites is still challenging. Herein, we successfully achieved atomic strain modulation on ultrathin layered vanadium oxide nanoribbons by an ingenious intercalation chemistry method. When trace sodium cations were introduced between the V2O5 layers (Na+-V2O5), the V-O bonds were stretched by the atomically strained vanadium sites, redistributing the local charges. The Na+-V2O5 demonstrated excellent photooxidation performance, which was approximately 12 and 14 times higher than that of pristine V2O5 and VO2, respectively. Complementary spectroscopy analysis and theoretical calculations confirmed that the atomically strained Na+-V2O5 had a high surficial charge density, improving the activation of oxygen molecules and contributing to the excellent photocatalytic property. This work provides a new approach for the rational design of strain-equipped catalysts for selective photooxidation reactions.

Mice deficient in poly(C)-binding protein 4 are susceptible to spontaneous tumors through increased expression of ZFP871 that targets p53 for degradation.

Poly(C)-binding protein 4 (PCBP4), also called MCG10 and a target of p53, plays a role in the cell cycle and is implicated in lung tumor suppression. Here, we found that PCBP4-deficient mice are prone to lung adenocarcinoma, lymphoma, and kidney tumor and that PCBP4-deficient mouse embryo fibroblasts (MEFs) exhibit enhanced cell proliferation but decreased cellular senescence. We also found that p53 expression is markedly reduced in PCBP4-deficient MEFs and mouse tissues, suggesting that PCBP4 in turn regulates p53 expression. To determine how PCBP4 regulates p53 expression, PCBP4 targets were identified by RNA immunoprecipitation followed by RNA sequencing (RNA-seq). We found that the transcript encoding ZFP871 (zinc finger protein 871; also called ZNF709 in humans) interacts with and is regulated by PCBP4 via mRNA stability. Additionally, we found that ZFP871 physically interacts with p53 and MDM2 proteins. Consistently, ectopic expression of ZFP871 decreases-whereas knockdown of ZFP871 increases-p53 protein stability through a proteasome-dependent degradation pathway. Moreover, loss of ZFP871 reverses the reduction of p53 expression by lack of PCBP4, and thus increased expression of ZFP871 is responsible for decreased expression of p53 in the PCBP4-deficient MEFs and mouse tissues. Interestingly, we found that, like PCBP4, ZFP871 is also regulated by DNA damage and p53. Finally, we showed that knockdown of ZFP871 markedly enhances p53 expression, leading to growth suppression and apoptosis in a p53-dependent manner. Thus, the p53-PCBP4-ZFP871 axis represents a novel feedback loop in the p53 pathway. Together, we hypothesize that PCBP4 is a potential tissue-specific tumor suppressor and that ZFP871 is part of MDM2 and possibly other ubiquitin E3 ligases that target p53 for degradation.

Breaking the Scaling Relationship in C-N Coupling via the Doping Effects for Efficient Urea Electrosynthesis.

Electrochemical C-N coupling reaction based on carbon dioxide and nitrate have been emerged as a new "green synthetic strategy" for the synthesis of urea, but the catalytic efficiency is seriously restricted by the inherent scaling relations of adsorption energies of the active sites, the improvement of catalytic activity is frequently accompanied by the decrease in selectivity. Herein, a doping engineering strategy was proposed to break the scaling relationship of intermediate binding and minimize the kinetic barrier of C-N coupling. A thus designed SrCo0.39Ru0.61O3-δ catalyst achieves a urea yield rate of 1522 µg h-1 mgcat. -1 and faradic efficiency of 34.1 % at -0.7 V versus reversible hydrogen electrode. A series of characterizations revealed that Co doping not only induces lattice distortion but also creates rich oxygen vacancies (OV) in the SrRuO3. The oxygen vacancies weaken the adsorption of *CO and *NH2 intermediates on the Co and Ru sites respectively, and the strain effects over the Co-Ru dual sites promoting the occurrence of C-N coupling of the two monomers instead of selective hydrogenating to form by-products. This work presents an insight into molecular coupling reactions towards urea synthesis via the doping engineering on SrRuO3.

Light-Driven C-C Coupling for Targeted Synthesis of CH3 COOH with Nearly 100 % Selectivity from CO2.

Targeted synthesis of acetic acid (CH3 COOH) from CO2 photoreduction under mild conditions mainly limits by the kinetic challenge of the C-C coupling. Herein, we utilized doping engineering to build charge-asymmetrical metal pair sites for boosted C-C coupling, enhancing the activity and selectivity of CO2 photoreduction towards CH3 COOH. As a prototype, the Pd doped Co3 O4 atomic layers are synthesized, where the established charge-asymmetrical cobalt pair sites are verified by X-ray photoelectron spectroscopy and X-ray absorption near edge spectroscopy spectra. Theoretical calculations not only reveal the charge-asymmetrical cobalt pair sites caused by Pd atom doping, but also manifest the promoted C-C coupling of double *COOH intermediates through shortening of the coupled C-C bond distance from 1.54 to 1.52 Å and lowering their formation energy barrier from 0.77 to 0.33 eV. Importantly, the decreased reaction energy barrier from the protonation of two*COOH into *CO intermediates for the Pd-Co3 O4 atomic layer slab is 0.49 eV, higher than that of the Co3 O4 atomic layer slab (0.41 eV). Therefore, the Pd-Co3 O4 atomic layers exhibit the CH3 COOH evolution rate of ca. 13.8 µmol g-1 h-1 with near 100% selectivity, both of which outperform all previously reported single photocatalysts for CO2 photoreduction towards CH3 COOH under similar conditions.

Amorphous Vanadium Oxide Nanosheets with Alterable Polyhedron Configuration for Fast-Charging Lithium-Ion Batteries.

Transition metal oxides with high theoretical capacities are promising anode materials for lithium-ion batteries (LIBs). However, the sluggish reaction kinetics remain a bottleneck for fast-charging applications due to its slow Li+ migration rate. Herein, a strategy is reported of significantly reducing the Li+ diffusion barrier of amorphous vanadium oxide by constructing a specific ratio of the VO local polyhedron configuration in amorphous nanosheets. The optimized amorphous vanadium oxide nanosheets with a ratio ≈1:4 for octahedron sites (Oh ) to pyramidal sites (C4v ) revealed by Raman spectroscopy and X-ray absorption spectroscopy (XAS) demonstrate the highest rate capability (356.7 mA h g-1 at 10.0 A g-1 ) and long-term cycling life (455.6 mA h g-1 at 2.0 A g-1 over 1200 cycles). Density functional theory (DFT)calculations further verify that the local structure (Oh :C4v = 1:4) intrinsically changes the degree of orbital hybridization between V and O atoms and contributes to a higher intensity of electron occupied states near the Fermi level, thus resulting in a low Li+ diffusion barrier for favorable Li+ transport kinetics. Moreover, the amorphous vanadium oxide nanosheets possess a reversible VO vibration mode and volume expansion rate close to 0.3%, as determined through in situ Raman and in situ transmission electron microscopy.

Multifunctional Imidazolidinyl Urea Additive Initiated Complex with PbI2 Toward Efficient and Stable Perovskite Solar Cells.

High-quality perovskite absorption layer is the fundamental basis for efficient and stable perovskite solar cells (PSCs). Due to the ionic nature of perovskite components, plentiful charged defects and suspension bonds remain on the surface of perovskite grains after continuous high-temperature annealing. Here, the complex initiated by the introduction of a multifunctional imidazolidinyl urea (IU) additive into the PbI2 precursor solution could serve as nucleation sites and crystallization templates for perovskite crystals to optimize the growth of high-quality perovskite films. By anchoring at the grain boundaries of perovskite films, IU molecules could passivate various types of defects, improve the hydrophobic properties, and inhibit lead leakage. Attributed to reduced defect density, improved charge transport, and inhibited α-FAPbI3 transition, the PSCs prepared based on IU additives achieved a champion power conversion efficiency of 23.18% (21.51% for the control PSCs) with negligible hysteresis and satisfactory stability.

Deterministic Magnetic Switching in Perpendicular Magnetic Trilayers Through Sunlight-Induced Photoelectron Injection.

Finding an energy-efficient way of switching magnetization is crucial in spintronic devices, such as memories. Usually, spins are manipulated by spin-polarized currents or voltages in various ferromagnetic heterostructures; however, their energy consumption is relatively large. Here, a sunlight control of perpendicular magnetic anisotropy (PMA) in Pt (0.8 nm)/Co (0.65 nm)/Pt (2.5 nm)/PN Si heterojunction in an energy-efficient manner is proposed. The coercive field (HC ) is altered from 261 to 95 Oe (64% variation) under sunlight illumination, enabling a nearly 180° deterministic magnetization switching reversibly with a 140 Oe magnetic bias assistant. The element-resolved X-ray circular dichroism measurement reveals different L3 and L2 edge signals of the Co layer with or without sunlight, suggesting a photoelectron-induced redistribution of the orbital and spin moment in Co magnetization. The first-principle calculations also reveal that the photo-induced electrons shift the Fermi level of electrons and enhance the in-plane Rashba field around the Co/Pt interfaces, leading to a weakened PMA and corresponding HC decreasing and magnetization switching accordingly. The sunlight control of PMA may provide an alternative way for magnetic recording, which is energy efficient and would reduce the Joule heat from the high switching current.

Interface Engineering a High Content of Co3+ Sites on Co3O4 Nanoparticles to Boost Acidic Oxygen Evolution.

Non-noble metal oxides have emerged as potential candidate electrocatalysts for acidic oxygen evolution reactions (OERs) due to their earth abundance; however, improving their catalytic activity and stability simultaneously in strong acidic electrolytes is still a major challenge. In this work, we report Co3O4@carbon core-shell nanoparticles on 2D graphite sheets (Co3O4@C-GS) as mixed-dimensional hybrid electrocatalysts for acidic OER. The obtained Co3O4@C-GS catalyst exhibits a low overpotential of 350 mV and maintains stability for 20 h at a current density of 10 mA cm-2 in H2SO4 (pH = 1) electrolyte. X-ray photoelectron and X-ray absorption spectroscopies illustrate that the higher content of Co3+ sites boosts acidic OER. Operando Raman spectroscopy reveals that the catalytic stability of Co3O4@C nanoparticles during the acidic OER is enhanced by the introduction of graphite sheets. This interface engineering of non-noble metal sites with high valence states provides an efficient approach to boost the catalytic activity and enhance the stability of noble-metal-free electrocatalysts for acidic OER.

Controlled synthesis of van der Waals CoS2for improved p-type transistor contact.

Two-dimensional (2D) van der Waals (vdW) p-type semiconductors have shown attractive application prospects as atomically thin channels in electronic devices. However, the high Schottky hole barrier of p-type semiconductor-metal contacts induced by Fermi-level pinning is hardly removed. Herein, we prepare a vdW 1T-CoS2nanosheet as the contact electrode of a WSe2field-effect transistor (FET), which shows a considerably high on/off ratio > 107and a hole mobility of ∼114.5 cm2V-1s-1. The CoS2nanosheets exhibit metallic conductivity with thickness dependence, which surpasses most 2D transition metal dichalcogenide metals or semimetals. The excellent FET performance of the CoS2-contacted WSe2FET device can be attributed to the high work function of CoS2, which lowers the Schottky hole barrier. Our work provides an effective method for growing vdW CoS2and opens up more possibilities for the application of 2D p-type semiconductors in electronic devices.