The neurophysiological mechanisms of medial prefrontal-perirhinal cortex circuit mediating temporal order memory decline in early stage of AD rats.

The temporal component of episodic memory has been recognized as a sensitive behavioral marker in early stage of Alzheimer's disease (AD) patients. However, parallel studies in AD animals are currently lacking, and the underlying neural circuit mechanisms remain poorly understood. Using a novel AppNL-G-F knock-in (APP-KI) rat model, the developmental changes of temporal order memory (TOM) and the relationship with medial prefrontal cortex and perirhinal cortex (mPFC-PRH) circuit were determined through in vivo electrophysiology and microimaging technique. We observed a deficit in TOM performance during the object temporal order memory task (OTOMT) in APP-KI rats at 6 month old, which was not evident at 3 or 4 months of age. Alongside behavioral changes, we identified a gradually extensive and aggravated regional activation and functional alterations in the mPFC and PRH during the performance of OTOMT, which occurred prior to the onset of TOM deficits. Moreover, coherence analysis showed that the functional connectivity between the mPFC and PRH could predict the extent of future behavioral performance. Further analysis revealed that the aberrant mPFC-PRH interaction mainly attributed to the progressive deterioration of synaptic transmission, information flow and network coordination from mPFC to PRH, suggesting the mPFC dysfunction maybe the key area of origin underlying the early changes of TOM. These findings identify a pivotal role of the mPFC-PRH circuit in mediating the TOM deficits in the early stage of AD, which holds promising clinical translational value and offers potential early biological markers for predicting AD memory progression.

Multi-view fringe projection profilometry for surfaces with intricate structures and high dynamic range.

Fringe projection profilometry plays an important role for quality control in production line. However, it is facing challenges in the measurement of objects with intricate structures and high dynamic range that involved in precision manufacturing and semiconductor packaging. In this paper, a multi-view fringe projection profilometry system, which deploys a vertical telecentric projector and four oblique tilt-shift cameras, is presented to address the "blind spots" caused by shadowing, occlusion and local specular reflection. A flexible and accurate system calibration method is proposed, in which the corrected pinhole imaging model is used to calibrate the telecentric projection, and the unified calibration is performed by bundle adjustment. Experimental results show that the 3D repeated measurement error and standard deviation are no more than 10 µm within a measurable volume of 70 × 40 × 20 mm3. Furthermore, a group of experiments prove that the developed system can achieve complete and accurate 3D measurement for high dynamic range surfaces with complex structures.

Accurate and flexible calibration method for a 3D microscopic structured light system with telecentric imaging and Scheimpflug projection.

3D imaging and metrology of complex micro-structures is a critical task for precision manufacturing and inspection. In this paper, an accurate and flexible calibration method for 3D microscopic structured light system with telecentric imaging and Scheimpflug projector is proposed. Firstly, a fringe projection 3D microscopy (FP-3DM) system consisting of a telecentric camera and a Scheimpflug projector is developed, which can take full advantage of the depth of field (DOF) and increase the measurement depth range. Secondly, an accurate and flexible joint calibration method is proposed to calibrate the developed system, which utilizes the established pinhole imaging model and Scheimpflug distortion model to calibrate telecentric imaging, and fully considers the correction and error optimization of the Scheimpflug projection model. Meanwhile, the optimized local homography is calculated to obtain more accurate sub-pixel correspondence between the camera and the projector, and the perspective-n-point (PnP) method make the 3D coordinate estimation of the feature point more accurate. Finally, a prototype and a dedicated calibration program are developed to realize high-resolution and high-precision 3D imaging. The experimental results demonstrate that the re-projection error is less than 1µm, and the 3D repeated measurement error based on feature fitting is less than 4µm, within the calibrated volume of 10(H)mm × 50(W)mm × 40(D)mm.

Study of deterministic surface micro-texture generation in ultra-precision grinding considering wheel oscillation.

Ultra-precision grinding is crucial for manufacturing high-end optics and molds, while the unbalanced wheel vibration is inevitable and becomes even more critical in surface generation, which resulted in undesired waviness and micro-texture on the ground surface. In this paper, to understand and control the micro-texture generation, a theoretical model has been developed to predict the deterministic surface micro-texture generation resulted from unbalanced tool vibration in ultra-precision grinding, in which the overlap trajectories of grinding wheel with an arc cutting edge were analyzed and calculated. The simulation work was performed and a double phase mechanism involved in deterministic textural pattern and structure has been revealed. Both theoretical and experimental results proved that phase shift is an important factor to determine micro-texture evolution in the ultra-precision grinding process. On this basis, a novel tool path strategy has been proposed to fabricate deterministic micro-structure by coordinating oscillation motion of the grinding wheel and phase shift control, in which a rhombus-shaped micro-structure array can be generated. A small adjustment for the phase shift was conducted and it was found that the more complex micro-texture with different textural patterns and micro-structure can be machined. The results indicated that the phase control for the tool path planning is an effective method to fabricate flexible and tunable micro-texture surfaces in ultra-precision grinding.

Chromatic confocal measurement method using a phase Fresnel zone plate.

A chromatic confocal measurement method based on a phase Fresnel zone plate (FZP) is described. Strong dispersion of FZP results in significant axial focal shift. The axial dispersion curve is close to linear within a certain wavelength range determined by the quantitative calculation using the vectorial angular spectrum theory. A 11.27 mm diameter phase FZP with a primary focal length of 50 mm was processed using standard photolithography technology and used as the dispersive objective in a homemade chromatic confocal measurement system. The calibrated axial measurement range exceeds 16 mm, the axial resolution reaches 0.8 µm, and the measurement accuracy of displacement is better than 0.4%. This chromatic confocal sensor has been practically used in the measurement of step height, glass thickness, and 3D surface profile. The proposed method has the obvious characteristics of simplicity, greatly reduced cost and superior performance. It is believed that this sensing method has broad application prospects in glass, coating, machinery, electronics, optics and other industries.

Fabrication of the high-precision micro-structure array using a phase shift modulation of superimposed oscillation in ultra-precision grinding.

Various micro-structure surface texturing methods have been used to produce optical functional surface in the grinding, such as the textured grinding wheel, wheel path control and off-spindle-axis grinding. However, those grinding technologies are inherently challenged to employ in large-scale surface grinding due to the extremely high requirement for wheel cutting profile dressing. In this study, a novel phase shift modulation based on wheel oscillation motion was proposed to generate the micro-structure array in ultra-precision grinding. The phase shift effect involved in the surface micro-structure generation is investigated, in which the role of the second phase shift on superimposed mode and micro-waviness forms is discussed. A theoretical model based on the tool superimposed oscillation is established to study the micro-structure texture generation mechanism by considering the second phase shift. The influence of modulation frequency in the case of phase shift and out of phase shift on the surface texture generation both for the striation pattern and micro-structure is compared to clarify the transition between the continuous grooves and the discrete micro-structure array. The study indicates that the phase shift modulation represents a novel paradigm for fabricating micro-structure array with considerable capability and high efficiency in ultra-precision grinding.

Flexible and simple telecentric camera calibration method.

The measurement accuracy of telecentric imaging technique straightforwardly depends on the calibration of the telecentric camera. We present a flexible and simple calibration method based on a telecentric imaging model and orthogonality of rotation matrix. First, we use the orthogonality of rotation matrix to solve the magnification. Second, the external parameters are solved by the imaging model, and the ambiguity of sign is solved. Finally, we use the LM nonlinear optimization method to solve the distortion parameters. Experimental results show that the reprojection error is 0.7 pixels, which represents the actual dimension of 6.37 µm. In addition, the standard measuring block and real objects are measured, and the results verify the measurement accuracy and robustness of the proposed method.

Influence of Electronic Modulation of Phenanthroline-Derived Ligands on Separation of Lanthanides and Actinides.

The solvent extraction, complexing ability, and basicity of tetradentate N-donor 2,9-bis(5,5,8,8-tetramethyl-5,6,7,8-tetrahydro-1,2,4-benzotriazin-3-yl)-1,10-phenanthroline (CyMe4-BT- Phen) and its derivatives functionalized by Br, hydroxyphenyl, nitryl were discussed and compared. It was demonstrated that four BTPhen ligands are able to selectively extract Am(lll) over Eu(lll). It was notable that the distribution ratio of 5-nitryl-CyMe4-BTPhen for Eu(lll) was suppressed under 0.02, which was much lower compared to DEu(lll) = 1 by CyMe4-BTPhen. The analysis of the effect of the substituent on the affinity to lanthanides was conducted by UV/vis and fluorescence spectroscopic titration. The stability constants of various ligands with Eu(lll) were obtained by fitting titration curve. Additionally, the basicity of various ligands was determined to be 3.1 ± 0.1, 2.3 ± 0.2, 0.9 ± 0.2, 0.5 ± 0.1 by NMR in the media of CD3OD with the addition of DClO4. The basicity of ligands follows the order of L1 > L2 > L3 > L4, indicating the tendency of protonation decreases with the electron-withdrawing ability increase.

Axial intensity distribution of a micro-Fresnel zone plate at an arbitrary numerical aperture.

The axial focus number (the number of focal spots along the axial direction) and focus intensity of a micro-Fresnel zone plate (FZP) are analyzed from deep ultraviolet to infrared using the Fourier decomposition, the vectorial angular spectrum (VAS) theory, and the three-dimensional finite-difference time-domain (FDTD) method. For a low-numerical aperture (NA) micro-FZP (NA<0.1), there are multiple axial high-order foci, and the intensity of each focus decreases slowly. However, the intensity of each high-order focus decreases rapidly with NA increasing. For a relatively high-NA micro-FZP (NA>0.3), the axial high-order foci are suppressed and there is one single focus. A fast, precise, and cost-efficient additive manufacturing method, i.e. two-photon polymerization, is used to fabricate high-NA phase-type micro-FZPs. The experiment has validated the phenomenon of linear negative focal shift of a high-NA micro-FZP. This property can be particularly applied in precise measurement of micro-displacement, film thickness, micro/nano step height, and wavelength.

Curvature effect on surface topography and uniform scallop height control in normal grinding of optical curved surface considering wheel vibration.

High-precision optical components with complex shapes or microstructures have been extensively used in numerous fields such as biomedicine, energy and aerospace. In order to accurately achieve the specific functions of the components, the form accuracy and uniform surface quality need to reach an ever-high level. To achieve this, ultra-precision normal grinding is used for machining various types of complex optical surfaces. However, the intricate variation of the workpiece curvature and grinding wheel vibration gives rise to great challenges to obtain higher precision and uniform surface conditions. In this study, the influence of curvature on surface topography generation has been investigated and a novel model of scallop height has been developed for surface topography generation in the normal grinding of the curved surface. In addition, the relative influence of the curvature is analyzed experimentally, in which the micro-waviness generation as a consequence of the unbalanced vibration of the grinding wheel is modeled and validated by experiments. Finally, the micro sinusoidal array with the setting value for scallop height is achieved by controlling the feed speed, which is determined by the local curvature of surface profile. The results indicated that the curvature variation posed a significant effect on surface uniformity and the model is valid to achieve surface scallop height control in the normal grinding effectively.

A strip of lateral flow gene assay using gold nanoparticles for point-of-care diagnosis of African swine fever virus in limited environment.

Recombinase polymerase amplification (RPA) was combined with lateral flow to develop a gold nanoparticles test strip for point-of-care diagnosis of African swine fever virus (ASFV), which is called lateral flow gene assay (LFGA). Common diagnostic techniques, including polymerase chain reaction (PCR) and immunochromatography, are time-consuming and labor-intensive, and generally require costly instruments. For improvement, this assay used tailed primers to produce DNA duplexes with a single-stranded tail at one end which can hybridize with a gold nanoparticle (AuNP)-labeled oligonucleotide detection probe. And then, biotin attached to the other end of the product bound to streptavidin, which previously fixed to the test line. Therefore, there would form a sandwich structure, and gold nanoparticles labeled on the detection probe would show a red band on the test line of strip. With the low reaction temperature (37~42 °C) and short reaction time (30 min), LFGA can specifically identify ASFV in blood samples infected with ASFV and classical swine fever virus (CSFV), and the LOD was 102 copies/µL, which was comparable to that of agarose gel electrophoresis. In addition, blood samples infected with ASFV and CSFV were tested, and it was found that the LFGA can specifically identify ASFV DNA. In conclusion, LFGA achieves visual observation of the product after rapid RPA amplification and does not require any expensive instruments during the entire process, which is very helpful for early diagnosis of ASFV. Combined recombinase polymerase amplification (RPA) with lateral flow, we developed a gold nanoparticles test strip for point-of-care diagnosis of African swine fever virus. The upstream primers of RPA were modified with biotin, and the downstream primers were modified with a C3 spacer and an oligonucleotide tail that can be hybridized to a gold nanoparticle-labeled oligonucleotide detection probe. On the strip, the test line and control line were sprayed with streptavidin and an oligonucleotide control probe. In the presence of positive products, RPA products can form a sandwich structure on the test line. Therefore, two red lines will be displayed both on the test line and control line. When there is no positive product, only the control line is shown in red. Its low reaction temperature (37~42 °C) and short time of amplification and detection (30 min) make ASFV realizing point-of-care diagnosis in limited environment.

Hybrid Fiber-Optic Sensing Integrating Brillouin Optical Time-Domain Analysis and Fiber Bragg Grating for Long-Range Two-Parameter Measurement.

Distributed fiber sensing (DFS) can provide real-time signals and warnings. The entire length of fiber optic cable can act as a sensing element, but the accuracy is sometimes limited. On the other hand, point-to-point fiber sensing (PPFS) is usually implemented using one or more fiber Bragg gratings (FBGs) at specific positions along with the fiber for the monitoring of specific parameters (temperature, strain, pressure, and so on). However, the cost becomes expensive when the number of FBGs increases. A hybrid fiber sensing scheme is thus proposed, combining the advantages of DFS and PPFS. It is based on a Brillouin optical time-domain analysis (BOTDA) fiber system with additional FBGs embedded at certain positions where it is necessary to detect specific parameters. The hybrid fiber sensing system has the advantages of full sensing coverage at essential locations that need to be carefully monitored. In our work, the test results showed that the proposed system could achieve a sensing distance of 16 km with the single-mode fiber with a 2 m spatial resolution. For FBG parameter measurements, the temperature variation was 52 °C, from 25 °C to 77 °C, with a temperature sensitivity of 23 pm/°C, and the strain was from 0 to 400 µÎµ, with a strain sensitivity of 0.975 pm/µÎµ, respectively, using two FBGs.

A study on the mechanical properties of a carbon nanotube probe with a high aspect ratio.

Carbon nanotube (CNT) probes are used in atomic force microscopes (AFMs) for high-resolution imaging, especially in the measurement of high aspect ratio micro/nano structures. Due to the use of a longer CNT tip leading to the degradation of image resolution, researchers have used several methods to cut CNTs. However, the principle of the selection of the cutting length has hardly been reported. Moreover, the influence of the effect of size on the mechanical properties of a CNT tip is not fully understood. In this study, an accurate model of finite element simulations is constructed on the basis of scanning electron microscopy data to investigate the mechanical properties of a CNT probe. An elastic model is employed to study the factors that influence the critical buckling force at the CNT tip during the measurement process. The calculation shows that the mechanical stiffness of the probe is affected by the diameter and the length-to-diameter ratio of the CNT tip. The changes in the von Mises stress at the bond between the AFM probe and the CNT tip as well as the variation of the strain energy at the CNT tip are discussed. It is hoped that this study will provide guidance for the selection of the cutting length of CNT-AFM probes and propose a basis for probe selection and design in practical measurements.

Determination of content of camel milk in adulterated milk samples by normalized real-time polymerase chain reaction system based on single-copy nuclear genes.

BACKGROUND: Compared with the traditional qualitative polymerase chain reaction (PCR), which only identifies the category of species, the quantitative PCR method provides a value, which is very important for appropriate penalty enforcement according to the extent of adulteration. However, most of the current quantitative PCR methods are based on mitochondrial genes, expressing different copy numbers in different cells and reducing the accuracy of quantitative results. In this study, single-copy nuclear housekeeping genes, instead of multicopy mitochondrial genes, were selected as both camel species-specific and reference genes to develop a novel normalized PCR system. RESULTS: This system had an excellent linear correlation (R2 = 0.9614) between camel milk content and Ct ratio (specific/reference genes), and allowed quantitative determination of the content of camel milk in adulterated milk samples. The accuracy was effectively validated using simulated adulterated samples with recoveries ranging from 90% to 120% and coefficient of variation less than 10%, exhibiting sufficient parameters of trueness and precision. CONCLUSIONS: The normalized PCR system based on single-copy nuclear genes is a simple, rapid and reliable method for the determination of the content of camel milk in adulterated milk samples, and also provides technical support for appropriate penalty enforcement. © 2020 Society of Chemical Industry.

Two new defatted beef reference materials, CAAS-1801 and CAAS-1802, for carbon and nitrogen stable isotope ratio measurements.

RATIONALE: Isotope reference materials are essential to enable reliable and comparable isotope data across multiple laboratories. Although many reference materials already exist, the best reference materials should mimic the unknown samples, so new reference materials continue to evolve with the development of isotope research in new product areas. METHODS: Two defatted beef reference materials, CAAS-1801 and CAAS-1802, with substantially different δ13 C values (due to difference in dietary intake), have been prepared as reference materials for stable C and N isotope analysis of meat tissue. Homogeneity, and short- and long-term stability tests of these reference materials have been performed. The δ13 C and δ15 N values of both materials were measured for two-point isotopic normalization against international reference materials by elemental analyzer/isotope ratio mass spectrometry (EA/IRMS). A total of nine international laboratories were selected for the joint evaluation. Cochran statistical analysis yielded the values reported here. RESULTS: The defatted beef reference material CAAS-1801 from Heilongjiang province has a δ13 C value of -13.58 ± 0.56‰ relative to VPDB and a δ15 N value of 4.23 ± 0.56‰ relative to N2 in air. The defatted beef reference material CAAS-1802 from Sichuan province has a δ13 C value of -25.03 ± 0.45‰ and a δ15 N value of 4.36 ± 0.69‰. CONCLUSIONS: The two defatted beef reference materials were found to be isotopically stable across a range of ambient temperatures, and to have low volatility and toxicity, which enables them to be useful as stable isotope reference materials in the field of authentication and traceability of meat.

Retraction Note to: Overexpression of a cotton annexin gene, GhAnn1, enhances drought and salt stress tolerance in transgenic cotton.

The authors are retracting this article because irregularities were involved in the reuse of stomatal images in Figure 9.

Large Changes in Fluorescent Color and Intensity of Symmetrically Substituted Arylmaleimides Caused by Subtle Structure Modifications.

Herein we report on four diarylmaleimides based on 3- or 2-substituted benzothiophene (M3S or M2S) and benzofuran (M3O or M2O), which show very different emission properties: aggregation-caused quenching (ACQ), aggregation-induced emission (AIE), and dual-state strong emission (DSE) in both solution and solid states. Their emission color in the solid state can be adjusted from green-yellow into red. M2O displays strong red solid-state emission at 630 nm with a quantum yield of 46.3 %. Single-crystal X-ray diffraction analysis confirms that their large distinction in solid-state emission originates from their different packing structures: hydrogen-bonded organic frameworks (HOFs) for M3S, a staggered structure for M3O, J-aggregation for M2S, and weak H-aggregation for M2O. HOF of M3S and weak H-aggregation of M2O make them produce inverse-type piezochromic fluorescence: blueshifted "turn-on" and redshifted "turn-off" emission, respectively. These results provide new insight in fluorescence manipulated by subtle structure modification.

Fine mapping of QTL qCTB10-2 that confers cold tolerance at the booting stage in rice.

KEY MESSAGE: The QTL qCTB10 - 2 controlling cold tolerance at the booting stage in rice was delimited to a 132.5 kb region containing 17 candidate genes and 4 genes were cold-inducible. Low temperature at the booting stage is a major abiotic stress-limiting rice production. Although some QTL for cold tolerance in rice have been reported, fine mapping of those QTL effective at the booting stage is few. Here, the near-isogenic line ZL31-2, selected from a BC7F2 population derived from a cross between cold-tolerant variety Kunmingxiaobaigu (KMXBG) and the cold-sensitive variety Towada, was used to map a QTL on chromosome 10 for cold tolerance at the booting stage. Using BC7F3 and BC7F4 populations, we firstly confirmed qCTB10-2 and gained confidence that it could be fine mapped. QTL qCTB10-2 explained 13.9 and 15.9% of the phenotypic variances in those two generations, respectively. Using homozygous recombinants screened from larger BC7F4 and BC7F5 populations, qCTB10-2 was delimited to a 132.5 kb region between markers RM25121 and MM0568. 17 putative predicted genes were located in the region and only 5 were predicted to encode expressed proteins. Expression patterns of these five genes demonstrated that, except for constant expression of LOC_Os10g11820, LOC_Os10g11730, LOC_Os10g11770, and LOC_Os10g11810 were highly induced by cold stress in ZL31-2 compared to Towada, while LOC_Os10g11750 showed little difference. Our results provide a basis for identifying the genes underlying qCTB10-2 and indicate that markers linked to the qCTB10-2 locus can be used to improve the cold tolerance of rice at the booting stage by marker-assisted selection.

A new retrospective, multi-evidence veterinary drug screening method using drift tube ion mobility mass spectrometry.

RATIONALE: The retrospectivity (the ability to retrospect to a previously unknown compound in raw data) is very meaningful for food safety and risk assessment when facing new emerging drugs. Accurate mass and retention time based screening may lead false positive and false negative results so new retrospective, reliable platform is desirable. METHODS: Different concentration levels of standards with and without matrix were analyzed using ion mobility (IM)-quadrupole-time-of-flight (Q-TOF) for collecting retrospective accurate mass, retention time, drift time and tandem MS evidence for identification in a single experiment. The isomer separation ability of IM and the four-dimensional (4D) feature abundance quantification abilities were evaluated for veterinary drugs for the first time. RESULTS: The sensitivity of the IM-Q-TOF workflow was obviously higher than that of the traditional database searching algorithm [find by formula (FbF) function] for Q-TOF. In addition, the IM-Q-TOF workflow contained most of the results from FbF and removed the false positive results. Some isomers were separated by IM and the 4D feature abundance quantitation removed interference with similar accurate mass and showed good linearity. CONCLUSION: A new retrospective, multi-evidence platform was built for veterinary drug screening in a single experiment. The sensitivity was significantly improved and the data can be used for quantification. The platform showed its potential to be used for food safety and risk assessment.

Simultaneous determination of amantadine and rimantadine in feed by liquid chromatography-Qtrap mass spectrometry with information-dependent acquisition.

A sensitive method for simultaneous determination of amantadine and rimantadine in feed was developed using an ultra-high-performance liquid chromatography-triple quadrupole linear ion trap mass spectrometry (UHPLC-Qtrap-MS) in the multiple reaction monitoring information-dependent acquisition-enhanced product ion (MRM-IDA-EPI) mode, and employing the mixed cation exchange (MCX) solid-phase extraction column as sample cleanup and amantadine-d15 and rimantadine-d4 as internal standards, respectively. Compared to traditional MRM mode, for the targeted drugs in feed simultaneously both the secondary mass spectra and MRM information can be obtained using UHPLC-Qtrap-MS with MRM-IDA-EPI mode, and thus more accurate qualitative confirmation results achieved even at lower concentration of 0.2 µg/L in acceptable purity fit values. After optimization of sample preparation, good linearities (R > 0.9994) were obtained over the concentration range from 1 to 200 µg/L for amantadine and rimantadine. The precision was validated by intra-day and inter-day, and the relative standard deviations were all within 9.61%. Mean recoveries ranged from 76.1 to 112% at spiked concentrations of 0.5-100 µg/kg in three types of feed samples, including formula feed and complex concentrated feed for pigs and premix feed for chicken. The limits of detection (LODs) and quantification (LOQs) were 0.2 and 0.5 µg/kg for both drugs, respectively. The application in real feed samples further proved the accuracy and reliability of the developed method. This method provides an important tool to detect illegal uses of amantadine and rimantadine in feed. Graphical abstract Simultaneous quantitation and qualitative confirmation of amantadine and rimantadine in feed by MRM-IDA-EPI.