RESUMO
Chromosome inheritance depends on centromeres, epigenetically specified regions of chromosomes. While conventional human centromeres are known to be built of long tandem DNA repeats, much of their architecture remains unknown. Using single-molecule techniques such as AFM, nanopores, and optical tweezers, we find that human centromeric DNA exhibits complex DNA folds such as local hairpins. Upon binding to a specific sequence within centromeric regions, the DNA-binding protein CENP-B compacts centromeres by forming pronounced DNA loops between the repeats, which favor inter-chromosomal centromere compaction and clustering. This DNA-loop-mediated organization of centromeric chromatin participates in maintaining centromere position and integrity upon microtubule pulling during mitosis. Our findings emphasize the importance of DNA topology in centromeric regulation and stability.
Assuntos
Centrômero , Proteínas Cromossômicas não Histona , Autoantígenos/genética , Autoantígenos/metabolismo , Centrômero/genética , Centrômero/metabolismo , Proteína Centromérica A/genética , Proteína Centromérica A/metabolismo , Cromatina , Proteínas Cromossômicas não Histona/genética , Proteínas Cromossômicas não Histona/metabolismo , DNA/genética , HumanosRESUMO
The ability to control the motion of single biomolecules is key to improving a wide range of biophysical and diagnostic applications. Solid-state nanopores are a promising tool capable of solving this task. However, molecular control and the possibility of slow readouts of long polymer molecules are still limited due to fast analyte transport and low signal-to-noise ratios. Here, we report on a novel approach of actively controlling analyte transport by using a double-nanopore architecture where two nanopores are separated by only a â¼ 20 nm gap. The nanopores can be addressed individually, allowing for two unique modes of operation: (i) pore-to-pore transfer, which can be controlled at near 100% efficiency, and (ii) DNA molecules bridging between the two nanopores, which enables detection with an enhanced temporal resolution (e.g., an increase of more than 2 orders of magnitude in the dwell time) without compromising the signal quality. The simplicity of fabrication and operation of the double-barrel architecture opens a wide range of applications for high-resolution readout of biological molecules.
Assuntos
DNA/análise , Movimento (Física) , Nanoporos/ultraestrutura , Eletrodos , NanotecnologiaRESUMO
Solid-state nanopores have emerged as promising platforms for biosensing including diagnostics for disease detection. Here we show nanopore experiments that detect CRISPR-dCas9, a sequence-specific RNA-guided protein system that specifically binds to a target DNA sequence. While CRISPR-Cas9 is acclaimed for its gene editing potential, the CRISPR-dCas9 variant employed here does not cut DNA but instead remains tightly bound at a user-defined binding site, thus providing an excellent target for biosensing. In our nanopore experiments, we observe the CRISPR-dCas9 proteins as local spikes that appear on top of the ionic current blockade signal of DNA molecules that translocate through the nanopore. The proteins exhibit a pronounced blockade signal that allows for facile identification of the targeted sequence. Even at the high salt conditions (1 M LiCl) required for nanopore experiments, dCas9 proteins are found to remain stably bound. The binding position of the target sequence can be read from the spike position along the DNA signal. We anticipate applications of this nanopore-based CRISPR-dCas9 biosensing approach in DNA-typing based diagnostics such as quick disease-strain identification, antibiotic-resistance detection, and genome typing.
Assuntos
Técnicas Biossensoriais/métodos , Sistemas CRISPR-Cas/genética , DNA/isolamento & purificação , Nanoporos , Sítios de Ligação , DNA/química , DNA/genética , Humanos , RNA Guia de Cinetoplastídeos/química , RNA Guia de Cinetoplastídeos/genéticaRESUMO
SUMMARY: Analysis of HIV-1 virions from participants infected in a randomized controlled preventive HIV-1 vaccine efficacy trial can help elucidate mechanisms of partial protection. By comparing the genetic sequence of viruses from vaccine and placebo recipients to the sequence of the vaccine itself, a technique called 'sieve analysis', one can identify functional specificities of vaccine-induced immune responses. We have created an interactive web-based visualization and data access tool for exploring the results of sieve analyses performed on four major preventive HIV-1 vaccine efficacy trials: (i) the HIV Vaccine Trial Network (HVTN) 502/Step trial, (ii) the RV144/Thai trial, (iii) the HVTN 503/Phambili trial and (iv) the HVTN 505 trial. The tool acts simultaneously as a platform for rapid reinterpretation of sieve effects and as a portal for organizing and sharing the viral sequence data. Access to these valuable datasets also enables the development of novel methodology for future sieve analyses. AVAILABILITY AND IMPLEMENTATION: Visualization: http://sieve.fredhutch.org/viz . Source code: https://github.com/nkullman/SIEVE . Data API: http://sieve.fredhutch.org/data . CONTACT: agartlan@fredhutch.org.
Assuntos
Biologia Computacional/métodos , Infecções por HIV/imunologia , HIV-1/imunologia , Ensaios Clínicos Controlados Aleatórios como Assunto , Software , Vacinas contra a AIDS/imunologia , Infecções por HIV/prevenção & controle , Infecções por HIV/virologia , Humanos , InternetRESUMO
We report a simple and scalable technique for the fabrication of nanopore arrays on freestanding SiN and graphene membranes based on electron-beam lithography and reactive ion etching. By controlling the dose of the single-shot electron-beam exposure, circular nanopores of any size down to 16 nm in diameter can be fabricated in both materials at high accuracy and precision. We demonstrate the sensing capabilities of these nanopores by translocating dsDNA through pores fabricated using this method, and find signal-to-noise characteristics on par with transmission-electron-microscope-drilled nanopores. This versatile lithography-based approach allows for the high-throughput manufacturing of nanopores and can in principle be used on any substrate, in particular membranes made out of transferable two-dimensional materials.
RESUMO
INTRODUCTION: There is a trend toward shorter-stay bariatric surgery. However, reducing LOS may increase complications and post-discharge resource utilization. Our goal was to compare outcomes before and after implementation of short-stay bariatric surgery. METHODS AND PROCEDURES: A retrospective chart review of a single-surgeon series of laparoscopic sleeve gastrectomy (LSG) and laparoscopic gastric bypass (LRYGB). The two cohorts "target discharge POD 1" and "target discharge POD 2" were analyzed for on time discharges (feasibility) and complications. Patients who were successfully discharged in each cohort were further analyzed for post-discharge resource utilization. RESULTS: Early discharge was initiated in November of 2014 with 107 patients identified in this group. An additional 107 patients from those immediately preceding represented the target DC POD 2 group. The target DC POD 2 patients had a significantly higher percentage of patients who met their target LOS. The SD group (overall and LRYGB) had a significantly higher rate of hospital readmissions; this was the only significant difference in primary outcomes between the two groups. There was no difference in mortality, leaks or reoperation. CONCLUSIONS: This study suggests that short-stay bariatric surgery is feasible and safe. Reducing the LOS from 2 to 1 day did not significantly increase the rate of hospital readmissions, ED visits or patient calls to our office. Further research is necessary to determine whether LOS can be further abbreviated to allow outpatient LSG and LRYGB.
Assuntos
Cirurgia Bariátrica/métodos , Serviço Hospitalar de Emergência/estatística & dados numéricos , Laparoscopia/métodos , Obesidade Mórbida/cirurgia , Alta do Paciente , Readmissão do Paciente/estatística & dados numéricos , Cuidados Pós-Operatórios/métodos , Complicações Pós-Operatórias/epidemiologia , Adulto , Feminino , Gastrectomia/métodos , Derivação Gástrica/métodos , Recursos em Saúde/estatística & dados numéricos , Humanos , Tempo de Internação , Masculino , Reoperação/métodos , Estudos Retrospectivos , Resultado do TratamentoRESUMO
High resolution nanoscale imaging in liquid environments is crucial for studying molecular interactions in biological and chemical systems. In particular, electron microscopy is the gold-standard tool for nanoscale imaging, but its high-vacuum requirements make application to in-liquid samples extremely challenging. Here we present a new graphene based wet cell device where high resolution scanning electron microscope (SEM) and energy dispersive x-rays (EDX) analysis can be performed directly inside a liquid environment. Graphene is an ideal membrane material as its high transparancy, conductivity and mechanical strength can support the high vacuum and grounding requirements of a SEM while enabling maximal resolution and signal. In particular, we obtain high resolution ([Formula: see text] nm) SEM video images of nanoparticles undergoing Brownian motion inside the graphene wet cell and EDX analysis of nanoparticle composition in the liquid enviornment. Our obtained resolution surpasses current conventional silicon nitride devices imaged in both a SEM and transmission electron microscope under much higher electron doses.
RESUMO
Biomolecular condensates play important roles in a wide array of fundamental biological processes, such as cellular compartmentalization, cellular regulation, and other biochemical reactions. Since their discovery and first observations, an extensive and expansive library of tools has been developed to investigate various aspects and properties, encompassing structural and compositional information, material properties, and their evolution throughout the life cycle from formation to eventual dissolution. This Review presents an overview of the expanded set of tools and methods that researchers use to probe the properties of biomolecular condensates across diverse scales of length, concentration, stiffness, and time. In particular, we review recent years' exciting development of label-free techniques and methodologies. We broadly organize the set of tools into 3 categories: (1) imaging-based techniques, such as transmitted-light microscopy (TLM) and Brillouin microscopy (BM), (2) force spectroscopy techniques, such as atomic force microscopy (AFM) and the optical tweezer (OT), and (3) microfluidic platforms and emerging technologies. We point out the tools' key opportunities, challenges, and future perspectives and analyze their correlative potential as well as compatibility with other techniques. Additionally, we review emerging techniques, namely, differential dynamic microscopy (DDM) and interferometric scattering microscopy (iSCAT), that have huge potential for future applications in studying biomolecular condensates. Finally, we highlight how some of these techniques can be translated for diagnostics and therapy purposes. We hope this Review serves as a useful guide for new researchers in this field and aids in advancing the development of new biophysical tools to study biomolecular condensates.
Assuntos
Condensados Biomoleculares , Condensados Biomoleculares/química , Condensados Biomoleculares/metabolismo , Microscopia de Força Atômica , Pinças Ópticas , Humanos , Microscopia/métodosRESUMO
Two-dimensional (2D) materials offer potential as substrates for biosensing devices, as their properties can be engineered to tune interactions between the surface and biomolecules. Yet, not many methods can measure these interactions in a liquid environment without introducing labeling agents such as fluorophores. In this work, we harness interferometric scattering (iSCAT) microscopy, a label-free imaging technique, to investigate the interactions of single molecules of long dsDNA with 2D materials. The millisecond temporal resolution of iSCAT allows us to capture the transient interactions and to observe the dynamics of unlabeled DNA binding to a hexagonal boron nitride (hBN) surface in solution for extended periods (including a fraction of 10%, of trajectories lasting longer than 110 ms). Using a focused ion beam technique to engineer defects, we find that DNA binding affinity is enhanced at defects; when exposed to long lanes, DNA binds preferentially at the lane edges. Overall, we demonstrate that iSCAT imaging is a useful tool to study how biomolecules interact with 2D materials, a key component in engineering future biosensors.
RESUMO
Alkali swellable microgels are widely used to control rheology of formulated products containing surfactants. However, formulations based on these pH-responsive polymers show undesirably large changes in yield stress in a range of pH close to the pKa of the acid group. Analysis of the behavior of a cross-linked copolymer of ethyl acrylate and methacrylic acid in the nonionized form (at pH below the pKa of methacrylic acid) in the presence of sodium dodecyl sulfate shows surfactant-mediated swelling (an increase in particle diameter by over 2.5×) and a peak in zero-shear viscosity versus surfactant concentration indicating surfactant-mediated interaction of the swollen microgels. On the basis of these results, we demonstrate a new class of nonionic microgels composed of hydrophobic alkyl acrylates and hydrophilic hydroxyalkyl esters that utilize the effects of surfactant-mediated swelling and interaction to provide pH-independent rheological properties.
Assuntos
Géis/química , Reologia/métodos , Tensoativos/química , Interações Hidrofóbicas e Hidrofílicas , ViscosidadeRESUMO
Ring-shaped structural maintenance of chromosomes (SMC) complexes like condensin and cohesin extrude loops of DNA. It remains, however, unclear how they can extrude DNA loops in chromatin that is bound with proteins. Here, we use in vitro single-molecule visualization to show that nucleosomes, RNA polymerase, and dCas9 pose virtually no barrier to loop extrusion by yeast condensin. We find that even DNA-bound nanoparticles as large as 200 nm, much bigger than the SMC ring size, also translocate into DNA loops during extrusion by condensin and cohesin. This even occurs for a single-chain version of cohesin in which the ring-forming subunits are covalently linked and cannot open to entrap DNA. The data show that SMC-driven loop extrusion has surprisingly little difficulty in accommodating large roadblocks into the loop. The findings also show that the extruded DNA does not pass through the SMC ring (pseudo)topologically, hence pointing to a nontopological mechanism for DNA loop extrusion.
Assuntos
Nanopartículas , Nucleossomos , Proteínas de Ciclo Celular , Cromatina , Saccharomyces cerevisiaeRESUMO
Nucleoid-associated proteins (NAPs) are a class of highly abundant DNA-binding proteins in bacteria and archaea. While both the composition and relative abundance of the NAPs change during the bacterial growth cycle, surprisingly little is known about their crosstalk in mutually binding and stabilizing higher-order nucleoprotein complexes in the bacterial chromosome. Here, we use atomic force microscopy and solid-state nanopores to investigate long-range nucleoprotein structures formed by the binding of two major NAPs, FIS and H-NS, to DNA molecules with distinct binding site arrangements. We find that spatial organization of the protein binding sites can govern the higher-order architecture of the nucleoprotein complexes. Based on sequence arrangement the complexes differed in their global shape and compaction as well as the extent of FIS and H-NS binding. Our observations highlight the important role the DNA sequence plays in driving structural differentiation within the bacterial chromosome.
RESUMO
We have developed a fabrication methodology for label-free optical trapping of individual nanobeads and proteins in inverted-bowtie-shaped plasmonic gold nanopores. Arrays of these nanoapertures can be reliably produced using focused ion beam (FIB) milling with gap sizes of 10-20 nm, single-nanometer variation, and with a remarkable stability that allows for repeated use. We employ an optical readout where the presence of the protein entering the trap is marked by an increase in the transmission of light through the nanoaperture from the shift of the plasmonic resonance. In addition, the optical trapping force of the plasmonic nanopores allows 20-nm polystyrene beads and proteins, such as beta-amylase and Heat Shock Protein (HSP90), to be trapped for very long times (approximately minutes). On demand, we can release the trapped molecule for another protein to be interrogated. Our work opens up new routes to acquire information on the conformation and dynamics of individual proteins.
RESUMO
2D nanoslit devices, where two crystals with atomically flat surfaces are separated by only a few nanometers, have attracted considerable attention because their tunable control over the confinement allows for the discovery of unusual transport behavior of gas, water, and ions. Here, the passage of double-stranded DNA molecules is studied through nanoslits fabricated from exfoliated 2D materials, such as graphene or hexagonal boron nitride, and the DNA polymer behavior is examined in this tight confinement. Two types of events are observed in the ionic current: long current blockades that signal DNA translocation and short spikes where DNA enters the slits but withdraws. DNA translocation events exhibit three distinct phases in their current-blockade traces-loading, translation, and exit. Coarse-grained molecular dynamics simulation allows the different polymer configurations of these phases to be identified. DNA molecules, including folds and knots in their polymer structure, are observed to slide through the slits with near-uniform velocity without noticeable frictional interactions of DNA with the confining graphene surfaces. It is anticipated that this new class of 2D-nanoslit devices will provide unique ways to study polymer physics and enable lab-on-a-chip biotechnology.
Assuntos
DNA/química , Nanoporos , Grafite/química , Conformação Molecular , Simulação de Dinâmica MolecularRESUMO
Kinases are dysregulated in most cancers, but the frequency of specific kinase mutations is low, indicating a complex etiology in kinase dysregulation. Here, we report a strategy to rapidly identify functionally important kinase targets, irrespective of the etiology of kinase pathway dysregulation, ultimately enabling a correlation of patient genetic profiles to clinically effective kinase inhibitors. Our methodology assessed the sensitivity of primary leukemia patient samples to a panel of 66 small-molecule kinase inhibitors over 3 days. Screening of 151 leukemia patient samples revealed a wide diversity of drug sensitivities, with 70% of the clinical specimens exhibiting hypersensitivity to one or more drugs. From this data set, we developed an algorithm to predict kinase pathway dependence based on analysis of inhibitor sensitivity patterns. Applying this algorithm correctly identified pathway dependence in proof-of-principle specimens with known oncogenes, including a rare FLT3 mutation outside regions covered by standard molecular diagnostic tests. Interrogation of all 151 patient specimens with this algorithm identified a diversity of kinase targets and signaling pathways that could aid prioritization of deep sequencing data sets, permitting a cumulative analysis to understand kinase pathway dependence within leukemia subsets. In a proof-of-principle case, we showed that in vitro drug sensitivity could predict both a clinical response and the development of drug resistance. Taken together, our results suggested that drug target scores derived from a comprehensive kinase inhibitor panel could predict pathway dependence in cancer cells while simultaneously identifying potential therapeutic options.
Assuntos
Resistencia a Medicamentos Antineoplásicos/genética , Perfilação da Expressão Gênica/métodos , Leucemia/enzimologia , Leucemia/genética , Proteínas Tirosina Quinases/genética , Algoritmos , Análise por Conglomerados , Humanos , Transdução de Sinais/genéticaRESUMO
High-throughput sequencing promises to accelerate the discovery of sequence variants, but distinguishing oncogenic mutations from irrelevant "passenger" mutations remains a major challenge. Here we present an analysis of two sequence variants of the MET receptor (hepatocyte growth factor receptor) R970C and T992I (also designated R988C and T1010I). Previous reports indicated that these sequence variants are transforming and contribute to oncogenesis. We screened patients with chronic lymphocytic leukemia (CLL), acute myeloid leukemia (AML), chronic myelomonocytic leukemia (CMML), colorectal cancer, endometrial cancer, thyroid cancer, or melanoma, as well as individuals without cancer, and found these variants at low frequencies in most cohorts, including normal individuals. No evidence of increased phosphorylation or transformative capacity by either sequence variant was found. Because small-molecule inhibitors for MET are currently in development, it will be important to distinguish between oncogenic sequence variants and rare single-nucleotide polymorphisms to avoid the use of unnecessary, and potentially toxic, cancer therapy agents.