Single-cell RNA sequencing reveals the immunoregulatory roles of PegIFN-α in patients with chronic hepatitis B.

BACKGROUND AND AIMS: Chronic hepatitis B (CHB) is caused by HBV infection and affects the lives of millions of people worldwide by causing liver inflammation, cirrhosis, and liver cancer. Interferon-alpha (IFN-α) therapy is a conventional immunotherapy that has been widely used in CHB treatment and achieved promising therapeutic outcomes by activating viral sensors and interferon-stimulated genes (ISGs) suppressed by HBV. However, the longitudinal landscape of immune cells of CHB patients and the effect of IFN-α on the immune system are not fully understood. APPROACH AND RESULTS: Here, we applied single-cell RNA sequencing (scRNA-seq) to delineate the transcriptomic landscape of peripheral immune cells in CHB patients before and after PegIFN-α therapy. Notably, we identified three CHB-specific cell subsets, pro-inflammatory (Pro-infla) CD14+ monocytes, Pro-infla CD16+ monocytes and IFNG+ CX3CR1- NK cells, which highly expressed proinflammatory genes and positively correlated with HBsAg. Furthermore, PegIFN-α treatment attenuated percentages of hyperactivated monocytes, increased ratios of long-lived naive/memory T cells and enhanced effector T cell cytotoxicity. Finally, PegIFN-α treatment switched the transcriptional profiles of entire immune cells from TNF-driven to IFN-α-driven pattern and enhanced innate antiviral response, including virus sensing and antigen presentation. CONCLUSIONS: Collectively, our study expands the understanding of the pathological characteristics of CHB and the immunoregulatory roles of PegIFN-α, which provides a new powerful reference for the clinical diagnosis and treatment of CHB.

Strain Engineering of Cd0.5 Zn0.5 S Nanocrystal for Efficient Photocatalytic Hydrogen Evolution from Wasted Plastic.

The challenge of synthesizing nanocrystal photocatalysts with adjustable lattice strain for effective waste-to-energy conversion is addressed in this study. Cd0.5 Zn0.5 S (CZS) nanocrystals are synthesized by a simple solvothermal method, regulation of the ratio between N, N-dimethylformamide, and water solvent are shown to provoke expansion and contraction, inducing an adjustable lattice strain ranging from -1.2% to 5.6%. With the hydrolyzed wasted plastic as a sacrificial agent, the 5.6% lattice-strain CZS exhibited a robust hydrogen evolution activity of 1.09 mmol m-2  h-1 (13.83 mmol g-1  h-1 ), 4.5 times that of pristine CZS. Characterizations and density functional theory calculation demonstrated that lattice expansion increases the spatial distance between the valence band maximum and conduction band minimum, thus reducing carrier recombination and promoting charge transfer. Additionally, lattice expansion induces surface S vacancies and adsorbed OH groups, further enhancing redox reactions. This study focuses on the synchronous regulation of crystal structure, charge separation/transport, and surface reactions through lattice strain engineering, which providing a reference for the rational design of new photocatalysts for effective waste-to-energy conversion.

Biomass-Derived Carbon Quantum Dots Chemical Bonding with Sn-Doped Bi2 O2 CO3 Endowed Fast Carriers' Dynamics and Stabilized Oxygen Vacancies for Efficient Decontamination of Combined Pollutants.

Surface defects on photocatalysts could promote carrier separation and generate unsaturated sites for chemisorption and reactant activation. Nevertheless, the inactivation of oxygen vacancies (OVs) would deteriorate catalytic activity and limit the durability of defective materials. Herein, bagasse-derived carbon quantum dots (CQDs) are loaded on the Sn-doped Bi2 O2 CO3 (BOC) via hydrothermal procedure to create Bi─O─C chemical bonding at the interface, which not only provides efficient atomic-level interfacial electron channels for accelerating carriers transfer, but also enhances durability. The optimized Sn-BOC/CQDs-2 achieves the highest photocatalytic removal efficiencies for levofloxacin (LEV) (88.7%) and Cr (VI) (99.3%). The elimination efficiency for LEV and Cr (VI) from the Sn-BOC/CQDs-2 is maintained at 55.1% and 77.0% while the Sn-BOC is completely deactivated after four cycle tests. Furthermore, the key role of CQDs in stabilization of OVs is to replace OVs as the active center of H2 O and O2 adsorption and activation, thereby preventing reactant molecules from occupying OVs. Based on theoretical calculations of the Fukui index and intermediates identification, three possible degradation pathways of LEV are inferred. This work provides new insight into improving the stability of defective photocatalysts.

3D-Stretched Film Ni3 S2 Nanosheet/Macromolecule Anthraquinone Derivative Polymers for Electrocatalytic Overall Water Splitting.

For the first time, a new polymer electrode AQS/S is prepared by compositing Ni3 S2 nanosheets and macromolecular anthraquinone derivative (AQD) supported on nickel foam with flying colors. The AQS/S exhibits high crystalline structure and abundant S defects. Density of state calculation shows that AQD has stable internal bonding and easy external bonding with metals, conducive to the dispersion of metal reaction sites, ensuring excellent activity and high stability. Under 1.0 m KOH solution, ultralow overpotentials of 62 and 133 mV at 10 mA cm-2 on AQS/S for hydrogen evolution reaction and on activated AQS/S (A-AQS/S) for oxygen evolution reaction, respectively, are achieved. 100 h chronopotentiometry and the cyclic voltammetry tests show that catalysts have high durability. The AQS/S‖A-AQS/S two-electrode system is also found to have good electrocatalytic activity for 1.43 V to get 10 mA cm-2  in overall water splitting, better than the state-of-the-art 20% Pt/C‖RuO2 combination.

A case in subtropical climate city: Assessing the bioretention hydraulic performance on storm in response to poor permeability soil.

Bioretention has been widely used in China for the purpose of sponge city construction. In subtropical climate areas, the performance of bioretention cell under condition of low infiltration underlying soil and heavy storms is still poorly understood. This study aimed to assess the effects of low infiltration underlying soil and precipitation characteristics on the hydraulic performance of a bioretention cell using the Storm Water Management Model (SWMM). The hydraulic performance of a bioretention cell were investigated under a Typical year rainfall event (P(total) (total precipitation) = 1299.2 mm) and seven heavy storms (i.e., Ptotal range from 53.1 mm to 287.3 mm), at different SF(i) (seepage rates of the underlying soil) (i.e., range from 2.5 mm/h to 15 mm/h). Then, sensitivity of the optimal design to the different design parameters, including the hydraulic conductivity of soil medium layer and the berm height of surface layer, was examined. The results show that the increase in SF(i) was effective in increasing the ARVR(i) (annual runoff volume reduction) and RVR(i) (runoff volume reduction), while little effective in increasing PFR(i) (peak flow reduction). Moreover, the ARVR(i) could meet the designed goal of 70% when the SF(i) was more than 7.5 mm/h. For RVR(i), the key variable of precipitation characteristic changes from Ptotal to P4h(max) (maximum precipitation in 4 h) as SF(i) increases, while P4h(max) remains as the key variable for PFR(i) all the time. The sensitivity studies demonstrate that the hydraulic conductivity is more effective in increasing PFR(i) than the berm height. For the bioretention cell under condition of low infiltration underlying soil and heavy storms, in order to simultaneously achieve expected reduction goal of both peak flow and runoff volume, and make the best comprehensive performance of bioretention cell, it requires not only a maintenance action to increase the hydraulic conductivity of soil medium layer, but also a drain pipe to be added in the storage layer, and meanwhile other LID practices should be combined.

Surface functional groups of carbon-based adsorbents and their roles in the removal of heavy metals from aqueous solutions: A critical review.

Carbon-based adsorbents such as graphene and its derivatives, carbon nanotubes, activated carbon, and biochar are often used to remove heavy metals from aqueous solutions. One of the important aspects of effective carbon adsorbents for heavy metals is their tunable surface functional groups. To promote the applications of functionalized carbon adsorbents in heavy metal removal, a systematic documentation of their syntheses and interactions with metals in aqueous solution is crucial. This work provides a comprehensive review of recent research on various carbon adsorbents in terms of their surface functional groups and the associated removal behaviors and performances to heavy metals in aqueous solutions. The governing removal mechanisms of carbon adsorbents to aqueous heavy metals are first outlined with a special focus on the roles of surface functional groups. It then summarizes and categorizes various synthesis methods that are commonly used to introduce heteroatoms, primarily oxygen, nitrogen, and sulfur, onto carbon surfaces for enhanced surface functionalities and sorptive properties to heavy metals in aqueous solutions. After that, the effects of various functional groups on adsorption behaviors of heavy metals onto the functionalized carbon adsorbents are elucidated. A perspective of future work on functional carbon adsorbents for heavy metal removal as well as other potential applications is also presented at the end.

Biochar amendment improves crop production in problem soils: A review.

Problem soils are referred to as those with poor physical, chemical, and biological properties that inhibit or prevent plant growth. These poor properties may be a result of soil formation processes but are largely due to inappropriate farming practices or anthropogenic pollution. The world has lost a third of its arable land due to erosion and pollution in the past 40 years. Thus, there is an urgent need for improving and remediating problem soils. As a novel multifunctional carbon material, biochar has been widely used as a soil amendment for improving soil quality. Previous reviews have summarized the characteristics of biochar, the interactions with various soil contaminants, and the effects on soil quality, soil productivity, and carbon sequestration. Relatively limited attention has been focused on the effects of biochar amendment on plant growth in problem soils. As a result, a comprehensive review of literature in the Web of Science was conducted with a focus on the effects of biochar amendment on plant growth in problems soils. The review is intended to present an overview about problem soils, biochars as functional materials for soil amendment, how amended biochars interact with soils, soil microbes, and plant roots in remediation of problem soil and improve plant growth. Additionally, existing knowledge gaps and future directions are discussed. Information gathered from this review suggests that biochar amendment is a viable way of improving the quality of problem soils and enhancing crop production. It is anticipated that further research on biochar amendment will increase our understanding on the interactions of biochar with components of problem soils, speed up our effort on soil remediation, and improve crop production in problem soils.

Alginate-based composites for environmental applications: A critical review.

Alginate-based composites have been extensively studied for applications in energy and environmental sectors due to their biocompatible, nontoxic, and cost-effective properties. This review is designed to provide an overview of the synthesis and application of alginate-based composites. In addition to an overview of current understanding of alginate biopolymer, gelation process, and cross-linking mechanisms, this work focuses on adsorption mechanisms and performance of different alginate-based composites for the removal of various pollutants including dyes, heavy metals, and antibiotics in water and wastewater. While encapsulation in alginate gel beads confers protective benefits to engineered nanoparticles, carbonaceous materials, cells and microbes, alginate-based composites typically exhibit enhanced adsorption performance. The physical and chemical properties of alginate-based composites determine the effectiveness under different application conditions. A series of alginate-based composites and their physicochemical and sorptive properties have been summarized. This critical review not only summarizes recent advances in alginate-based composites but also presents a perspective of future work for their environmental applications.

Decoding leukemia at the single-cell level: clonal architecture, classification, microenvironment, and drug resistance.

Leukemias are refractory hematological malignancies, characterized by marked intrinsic heterogeneity which poses significant obstacles to effective treatment. However, traditional bulk sequencing techniques have not been able to effectively unravel the heterogeneity among individual tumor cells. With the emergence of single-cell sequencing technology, it has bestowed upon us an unprecedented resolution to comprehend the mechanisms underlying leukemogenesis and drug resistance across various levels, including the genome, epigenome, transcriptome and proteome. Here, we provide an overview of the currently prevalent single-cell sequencing technologies and a detailed summary of single-cell studies conducted on leukemia, with a specific focus on four key aspects: (1) leukemia's clonal architecture, (2) frameworks to determine leukemia subtypes, (3) tumor microenvironment (TME) and (4) the drug-resistant mechanisms of leukemia. This review provides a comprehensive summary of current single-cell studies on leukemia and highlights the markers and mechanisms that show promising clinical implications for the diagnosis and treatment of leukemia.

Exploration of the mechanism of levofloxacin removal by N-doped-induced interfacial micro-electric field-activated persulfate.

The defects formed by N doping always coexist with pyrrole nitrogen (Po) and pyridine nitrogen (Pd), and the synergistic mechanisms of H2O2 production and PMS activation between the different Po: Pd are unknown. This paper synthesized MOF-derived carbon materials with different nitrogen-type ratios as cathode materials in an electro-Fenton system using precursors with different nitrogen-containing functional groups. Several catalysts with different Po: Pd ratios (0:4, 1:3, 2:2, 3:1, 4:0) were prepared, and the best catalyst for LEV degradation was FC-CN (Po: Pd=3:1). X-ray Photoelectron Spectroscopy (XPS) and density-functional theory (DFT) calculations show that the introduction of nitrogen creates an interfacial micro-electric field (IMEF) in the carbon layer and the metal, accelerates the electron transfer from the carbon layer to the Co atoms, and promotes cycling between the Fe3+/Co2+ redox pairs, with the electron transfer reaching a maximum at Po: Pd = 3:1. FC-CN (Po: Pd=3:1) achieved more than 95 % LEV degradation in 90 min at pH = 3-9, with a lower energy consumption of 0.11 kWh m-3 order-1. and the energy consumption of the catalyst for LEV degradation is lower than that of those catalysts reported. In addition, the degradation pathway of LEV was proposed based on UPLC-MS and Fukui function. This study offers some valuable information for the application of MOF derivatives.

Anthraquinone-based polymer modified BiVO4 photoanode with strong electron-withdrawing functional groups for boasting photoelectrochemical water oxidation.

The photoelectrochemical (PEC) performance ofBiVO4 is limited by sluggish water oxidation kinetics and severe carrier recombination. Herein, a novel high-performance BiVO4/NiFe-NOAQ photoanode is prepared by a simple one-step hydrothermal method, using BiVO4 and 1-Nitroanthraquinone (NOAQ) as raw materials. The BiVO4/NiFe-NOAQ photoanode has an excellent photocurrent density of 5.675 mA cm-2 at 1.23 VRHE, which is 3.35 times higher than that of the pure BiVO4 (1.693 mA cm-2) photoanode. The BiVO4/NiFe-NOAQ shows a significant improvement in charge separation efficiency (86.12 %) and charge injection efficiency (87.86 %). The improvement is ascribable to the NiFe-NOAQ form a type II heterojunction with BiVO4 to inhibit carrier recombination. More importantly, the kinetic isotope experiment suggests that the proton-coupled electron transfer (PCET) process can enhance the charge transfer of BiVO4/NiFe-NOAQ. The contact angle measurements show that modifying functional groups enhanced the hydrophilicity of BiVO4/NiFe-NOAQ, which can further accelerate the PCET process. The XPS and PL results as well as the tauc plot indicate that the strong electron-withdrawing ability of -NO2 which can promote the extension of π conjugation, results in more π electron delocalization and produces more efficient active sites, thus achieving efficient photoelectrochemical water oxidation.

Ultrathin layer TAFC on BiVO4 with ligand-to-metal charge transfer enhances built-in electric field for boosting photoelectrochemical water oxidation.

To reveal the mechanism of charge transfer between interfaces of BiVO4-based heterogeneous materials in photoelectrochemical water splitting system, the cocatalyst was grown in situ using tannic acid (TA) as a ligand and Fe and Co ions as metal centers (TAFC), and then uniformly and ultra-thinly coated on BiVO4 to form photoanodes. The results show that the BiVO4/TAFC achieves a superior photocurrent density (4.97 mA cm-2 at 1.23 VRHE). The charge separation and charge injection efficiencies were also significantly higher, 82.0 % and 78.9 %, respectively. From XPS, UPS, KPFM, and density functional theory calculations, Ligand-to-metal charge transfer (LMCT) acts as an electron transport highway in TAFC ultrathin layer to promote the concentration of electrons towards metal center, leading to an increase in the work function, which enhances the built-in electric field and further improves the charge transport. This study demonstrated that the LMCT pathway on TA-metal complexes enhances the built-in electric field in BiVO4/TAFC to promote charge transport and thus enhance water oxidation, providing a new understanding of the performance improvement mechanism for the surface-modified composite photoanodes.

Phase separation-competent FBL promotes early pre-rRNA processing and translation in acute myeloid leukaemia.

RNA-binding proteins (RBPs) are pivotal in acute myeloid leukaemia (AML), a lethal disease. Although specific phase separation-competent RBPs are recognized in AML, the effect of their condensate formation on AML leukaemogenesis, and the therapeutic potential of inhibition of phase separation are underexplored. In our in vivo CRISPR RBP screen, fibrillarin (FBL) emerges as a crucial nucleolar protein that regulates AML cell survival, primarily through its phase separation domains rather than methyltransferase or acetylation domains. These phase separation domains, with specific features, coordinately drive nucleoli formation and early processing of pre-rRNA (including efflux, cleavage and methylation), eventually enhancing the translation of oncogenes such as MYC. Targeting the phase separation capability of FBL with CGX-635 leads to elimination of AML cells, suggesting an additional mechanism of action for CGX-635 that complements its established therapeutic effects. We highlight the potential of PS modulation of critical proteins as a possible therapeutic strategy for AML.

Inducing spin polarization via Co doping in the BiVO4 cell to enhance the built-in electric field for promotion of photocatalytic CO2 reduction.

The efficiency of CO2 photocatalytic reduction is severely limited by inefficient separation and sluggish transfer. In this study, spin polarization was induced and built-in electric field was strengthened via Co doping in the BiVO4 cell to boost photocatalytic CO2 reduction. Results showed that owing to the generation of spin-polarized electrons upon Co doping, carrier separation and photocurrent production of the Co-doped BiVO4 were enhanced. CO production during CO2 photocatalytic reduction from the Co-BiVO4 was 61.6 times of the BiVO4. Notably, application of an external magnetic field (100 mT) further boosted photocatalytic CO2 reduction from the Co-BiVO4, with 68.25 folds improvement of CO production compared to pristine BiVO4. The existence of a built-in electric field (IEF) was demonstrated through density functional theory (DFT) simulations and kelvin probe force microscopy (KPFM). Mechanism insights could be elucidated as follows: doping of magnetic Co into the BiVO4 resulted in increased the number of spin-polarized photo-excited carriers, and application of a magnetic field led to an augmentation of intrinsic electric field due to a dipole shift, thereby extending carrier lifetime and suppressing charges recombination. Additionally, HCOO- was a crucial intermediate in the process of CO2RR, and possible pathways for CO2 reduction were proposed. This study highlights the significance of built-in electric fields and the important role of spin polarization for promotion of photocatalytic CO2 reduction.

Hematopoietic stem and progenitor cell membrane-coated vesicles for bone marrow-targeted leukaemia drug delivery.

Leukemia is a kind of hematological malignancy originating from bone marrow, which provides essential signals for initiation, progression, and recurrence of leukemia. However, how to specifically deliver drugs to the bone marrow remains elusive. Here, we develop biomimetic vesicles by infusing hematopoietic stem and progenitor cell (HSPC) membrane with liposomes (HSPC liposomes), which migrate to the bone marrow of leukemic mice via hyaluronic acid-CD44 axis. Moreover, the biomimetic vesicles exhibit superior binding affinity to leukemia cells through intercellular cell adhesion molecule-1 (ICAM-1)/integrin ß2 (ITGB2) interaction. Further experiments validate that the vesicles carrying chemotherapy drug cytarabine (Ara-C@HSPC-Lipo) markedly inhibit proliferation, induce apoptosis and differentiation of leukemia cells, and decrease number of leukemia stem cells. Mechanically, RNA-seq reveals that Ara-C@HSPC-Lipo treatment induces apoptosis and differentiation and inhibits the oncogenic pathways. Finally, we verify that HSPC liposomes are safe in mice. This study provides a method for targeting bone marrow and treating leukemia.

Class I HDAC inhibitors enhance antitumor efficacy and persistence of CAR-T cells by activation of the Wnt pathway.

Epigenetic modification shapes differentiation trajectory and regulates the exhaustion state of chimeric antigen receptor T (CAR-T) cells. Limited efficacy induced by terminal exhaustion closely ties with intrinsic transcriptional regulation. However, the comprehensive regulatory mechanisms remain largely elusive. Here, we identify class I histone deacetylase inhibitors (HDACi) as boosters of CAR-T cell function by high-throughput screening of chromatin-modifying drugs, in which M344 and chidamide enhance memory maintenance and resistance to exhaustion of CAR-T cells that induce sustained antitumor efficacy both in vitro and in vivo. Mechanistically, HDACi decrease HDAC1 expression and enhance H3K27ac activity. Multi-omics analyses from RNA-seq, ATAC-seq, and H3K27ac CUT&Tag-seq show that HDACi upregulate expression of TCF4, LEF1, and CTNNB1, which subsequently activate the canonical Wnt/ß-catenin pathway. Collectively, our findings elucidate the functional roles of class I HDACi in enhancing CAR-T cell function, which provides the basis and therapeutic targets for synergic combination of CAR-T cell therapy and HDACi treatment.

Flower-like microspheres Z-scheme Bi2Sn2O7/NiAl-LDH heterojunction for boosting photocatalytic CO2 reduction under visible light.

Fabrication of efficient photocatalysts with great visible light utilization ability, rapid carriers' separation, and suitable redox potential is essential for improving photocatalytic CO2 reduction. Herein, flower-like microspheres Bi2Sn2O7/NiAl-layered double hydroxide (BSO/LDH) heterojunctions were prepared by hydrothermal process for CO2 reduction. The Bi2Sn2O7 nanoparticles were dispersed on NiAl-LDH nanosheets, with tight contact interface, which facilitated charges transfer and exposing more catalytic active sites. Results of photochemical deposition of metal/metal oxide demonstrated that interfacial charges transfer of the BSO/LDH followed Z-scheme mechanism, endowing more desired redox potential and more efficient carriers separation. The 30%-BSO/LDH showed the highest CO and CH4 yields of 37.91 and 1.18 µmol g-1 h-1 under visible light irradiation, 3.4 and 2.0 times higher than those from the NiAl-LDH, respectively. The main intermediates during CO2 reduction were carboxylate (COOH*) and aldehyde group (CHO*), and CO2 reduction pathways and mechanism were proposed accordingly. This study provided referential strategy for designing efficient heterojunction photocatalysts for CO2 conversion.

Unraveling the π-interaction of NiFe-based metal-organic frameworks with enhanced oxygen evolution: Optimizing electronic structure and facilitating electron transfer modulation.

Metal-organic frameworks (MOFs) with conjugation carboxylate ligands as electrocatalysts can significantly improve oxygen evolution reaction (OER), but the role of π-interaction on the reactive sites of OER is often neglected. We intend to unravel the mechanism of how π-interaction enhances OER performance. The results of Rietveld refinement, density functional theory (DFT) calculations, and in-situ Raman spectra show that π-interaction can efficiently modulate the local spin configuration of metal centers, facilitate γ-Ni1-xFexOOH active species with high-valence Ni sites modified by high-spin Fe, accelerate electron transfer, optimize the d-band center together with the beneficial rate-determining step of OER. NiFe-BPDC MOFs/NF with 0.8559 eV π-interaction energy generated γ-Ni1-xFexOOH in only 60 s at 1.4 V, demonstrating that π-interaction promotes the rapid generation of highly active reactive sites. Furthermore, the results of in-situ Raman and electron paramagnetic resonance (EPR) spectra reveal that the deprotonation and deoxygenation steps of OER are accompanied by changes in the oxidation state of metal ions and the generation of oxygen vacancies on the surface of catalysts. In addition, NiFe-BPDC MOFs/NF rapidly completes the deprotonation and deoxygenation steps, and it requires only 288 mV overpotential to reach 100 mA/cm2 with 100 h of stability, suggesting promising industrial application.

Redox-active ligands enhance oxygen evolution reaction activity: Regulating the spin state of ferric ions and accelerating electron transfer.

Metal-organic frameworks (MOFs) are considered as one of the most promising catalysts for oxygen evolution reaction (OER). However, only a few have introduced redox-active ligands into MOFs and explored their role in the OER process. In this work, we synthesized FeNi DHBQ/NF using the redox-active ligand 2,5-dihydroxy-1,4-benzoquinone (DHBQ), which exhibited excellent redox activity and required only 207 and 242 mV overpotentials to achieve current densities of 10 and 100 mA cm-2. Our research confirms that (i) the doping of Fe leads to the formation of Ni â†’ O â†’ Fe electron transfer channels in the MOFs and stronger electron transfer, attributed to the stronger d-π conjugation between the metal center and the ligand and reduced the d-orbital crystal field splitting energy of Fe3+; (ii) the rate determination step (RDS) in the OER process of the catalyst is the formation of O*, while Fe and redox-active ligands effectively regulate the adsorption energy of oxygen-containing intermediates, reducing the energy barrier of the RDS; (iii) the redox-active ligands can act as "electron reservoirs" in the electrochemical process, making Ni more readily oxidized to Ni3+ or even Ni4+ at low potentials, which is beneficial to the subsequent OER process.

Sn and dual-oxygen-vacancy in the Z-scheme Bi2Sn2O7/Sn/NiAl-layered double hydroxide heterojunction synergistically enhanced photocatalytic activity toward carbon dioxide reduction.

Photocatalytic conversion of carbon dioxide (CO2) into high value-added chemicals is an attractive yet challenging process, primarily due to the readily recombination of hole-electron pairs in photocatalysts. Herein, dual-oxygen-vacancy mediated Z-scheme Bi2Sn2O7/Sn/NiAl-layered double hydroxide (VO,O-20BSL) heterojunctions were hydrothermally synthesized and subsequently modified with Sn monomers to enhance photocatalytic activity toward CO2 reduction. The abundance of oxygen vacancies endowed the VO,O-20BSL with extended optical adsorption, enhanced charges separation, and superior CO2 adsorption and activation. The interfacial charges transfer of the VO,O-20BSL was demonstrated to follow a Z-scheme mechanism via photochemical deposition of metal/metal oxide. Under visible light irradiation, the VO,O-20BSL exhibited the highest yields of carbon monoxide (CO) and methane (CH4), with values of 72.03 and 0.85 umol·g-1·h-1, respectively, which were 2.66 and 1.57 times higher than that of the VO-NiAl-layered double hydroxide (VO-1LDH). In situ diffuse reflectance infrared fourier transform spectroscopy (DRIFTS) revealed that carboxylic acid groups (COOH*) and aldehyde groups (CHO*) were the predominant intermediates during CO2 reduction, and accordingly, possible CO2 reduction pathways and mechanism were proposed. This study presents a feasible approach to incorporate dual vacancies into Z-scheme heterojunctions for CO2 reduction.