Reconstructed covalent organic frameworks.

Covalent organic frameworks (COFs) are distinguished from other organic polymers by their crystallinity1-3, but it remains challenging to obtain robust, highly crystalline COFs because the framework-forming reactions are poorly reversible4,5. More reversible chemistry can improve crystallinity6-9, but this typically yields COFs with poor physicochemical stability and limited application scope5. Here we report a general and scalable protocol to prepare robust, highly crystalline imine COFs, based on an unexpected framework reconstruction. In contrast to standard approaches in which monomers are initially randomly aligned, our method involves the pre-organization of monomers using a reversible and removable covalent tether, followed by confined polymerization. This reconstruction route produces reconstructed COFs with greatly enhanced crystallinity and much higher porosity by means of a simple vacuum-free synthetic procedure. The increased crystallinity in the reconstructed COFs improves charge carrier transport, leading to sacrificial photocatalytic hydrogen evolution rates of up to 27.98 mmol h-1 g-1. This nanoconfinement-assisted reconstruction strategy is a step towards programming function in organic materials through atomistic structural control.

Atomic observation and structural evolution of covalent organic framework rotamers.

Dynamic 3D covalent organic frameworks (COFs) have shown concerted structural transformation and adaptive gas adsorption due to the conformational diversity of organic linkers. However, the isolation and observation of COF rotamers constitute undergoing challenges due to their comparable free energy and subtle rotational energy barrier. Here, we report the atomic-level observation and structural evolution of COF rotamers by cryo-3D electron diffraction and synchrotron powder X-ray diffraction. Specifically, we optimize the crystallinity and morphology of COF-320 to manifest its coherent dynamic responses upon adaptive inclusion of guest molecules. We observe a significant crystal expansion of 29 vol% upon hydration and a giant swelling with volume change up to 78 vol% upon solvation. We record the structural evolution from a non-porous contracted phase to two narrow-pore intermediate phases and the fully opened expanded phase using n-butane as a stabilizing probe at ambient conditions. We uncover the rotational freedom of biphenylene giving rise to significant conformational changes on the diimine motifs from synclinal to syn-periplanar and anticlinal rotamers. We illustrate the 10-fold increment of pore volumes and 100% enhancement of methane uptake capacity of COF-320 at 100 bar and 298 K. The present findings shed light on the design of smarter organic porous materials to maximize host-guest interaction and boost gas uptake capacity through progressive structural transformation.

Popping and Locking: Balanced Rigidity and Porosity of Zeolitic Imidazolate Frameworks for High-Productivity Methane Purification.

Zeolitic imidazolate frameworks (ZIFs) hold great promise in carbon capture, owing to their structural designability and functional porosity. However, intrinsic linker dynamics limit their pressure-swing adsorption application to biogas upgrading and methane purification. Recently, a functionality-locking strategy has shown feasibility in suppressing such dynamics. Still, a trade-off between structural rigidity and uptake capacity remains a key challenge for optimizing their high-pressure CO2/CH4 separation performance. Here, we report a sequential structural locking (SSL) strategy for enhancing the CO2 capture capacity and CH4 purification productivity in dynamic ZIFs (dynaZIFs). Specifically, we isolated multiple functionality-locked phases, ZIF-78-lt, -ht1, and -ht2, by activation at 50, 160, and 210 °C, respectively. We observed multiple-level locking through gas adsorption and powder X-ray diffraction. We uncovered an SSL mechanism dominated by linker-linker π-π interactions that transit to C-H···O hydrogen bonds with binding energies increasing from -0.64 to -2.77 and -5.72 kcal mol-1, respectively, as evidenced by single-crystal X-ray diffraction and density functional theory calculations. Among them, ZIF-78-ht1 exhibits the highest CO2 capture capacity (up to 18.6 mmol g-1) and CH4 purification productivity (up to 7.6 mmol g-1) at 298 K and 30 bar. These findings provide molecular and energetic insights into leveraging framework flexibility through the SSL mechanism to optimize porous materials' separation performance.

Flexibility On-Demand: Multivariate 3D Covalent Organic Frameworks.

Dynamic 3D covalent organic frameworks (dynaCOFs) have shown concerted structural transformation and responses upon adaptive guest adsorption. The multivariate (MTV) strategy incorporating multiple functionalities within a backbone is attractive for tuning the framework flexibility and dynamic responses. However, a major synthetic challenge arises from the different chemical reactivities of linkers usually resulting in phase separation. Here, we report a general synthetic protocol for making 3D MTV-COFs by balancing the linker reactivity and solvent polarity. Specifically, 15 crystalline and phase pure MTV-COF-300 isostructures are constructed by linking a tetrahedral unit with eight ditopic struts carrying various functional groups. We find that the electron-donating groups make the linker reactivity too low to allow the reaction to proceed fully, while the electron-withdrawing groups afford increased reactivity and hardly yield crystalline materials. To overcome the crystallization dilemma, the combination of polar aprotic with nonpolar solvents was used to improve the solubility of oligomers and slow the reaction kinetics in MTV-COF synthesis. We demonstrate the abilities of these MTV-COFs to tune gas dynamic behaviors and the separation of benzene and cyclohexane. These findings reveal the integration of multivariate functionalities into dynaCOFs with on-demand flexibility to achieve dynamic synergism in particular applications, outperforming their pure, monofunctional counterparts.

Constructing Photocatalytic Covalent Organic Frameworks with Aliphatic Linkers.

Photocatalytic covalent organic frameworks (COFs) are typically constructed with rigid aromatic linkers for crystallinity and extended π-conjugation. However, the essential hydrophobicity of the aromatic backbone can limit their performances in water-based photocatalytic reactions. Here, we for the first time report the synthesis of hydrophilic COFs with aliphatic linkers [tartaric acid dihydrazide (TAH) and butanedioic acid dihydrazide] that can function as efficient photocatalysts for H2O2 and H2 evolution. In these hydrophilic aliphatic linkers, the specific multiple hydrogen bonding networks not only enhance crystallization but also ensure an ideal compatibility of crystallinity, hydrophilicity, and light harvesting. The resulting aliphatic linker COFs adopt an unusual ABC stacking, giving rise to approximately 0.6 nm nanopores with an improved interaction with water guests. Remarkably, both aliphatic linker-based COFs show strong visible light absorption, along with a narrow optical band gap of ∼1.9 eV. The H2O2 evolution rate for TAH-COF reaches up to 6003 µmol h-1 g-1, in the absence of sacrificial agents, surpassing the performance of all previously reported COF-based photocatalysts. Theoretical calculations reveal that the TAH linker can enhance the indirect two-electron oxygen reduction reaction for H2O2 production by improving the O2 adsorption and stabilizing the *OOH intermediate. This study opens a new avenue for constructing semiconducting COFs using nonaromatic linkers.

Topology Prediction of Gas-Separating Metal-Organic Frameworks with Low Symmetry Vertices.

Topology serves as a blueprint for the construction of reticular structures such as metal-organic frameworks, especially for those based on building blocks with highly symmetrical shapes. However, it remains a challenge to predict the topology of the frameworks from less symmetrical units, because their corresponding vertex figures are largely deformed from the perfect geometries with no "default" net embedding. Furthermore, vertices involving flexible units may have multiple shape choices, and the competition among their designated topologies makes the structure prediction in large uncertainty. Herein, the deformation index is proposed to characterize the symmetry loss of the vertex figure by comparing it with its ideal geometry. The mathematical index is employed to predict the shapes of two in situ formed Co-based metalloligands (pseudo-tetrahedron and pseudo-square), which further dictate the framework topology (flu and scu) when they are joined with the [Zr6O8]-based cuboid units. The two frameworks with very similar constituents provide an ideal platform to investigate how the pore shapes and interconnectivity influence the gas separation. The net with cylindrical channels outperforms the other with discreate cages in C3H8/C2H6/CH4 separation, benefiting from the facile accessibility of its interaction sites to the guests imposed by the specific framework topology.

Directing Molecular Weaving of Covalent Organic Frameworks and Their Dimensionality by Angular Control.

Although reticular chemistry has commonly utilized mutually embracing tetrahedral metal complexes as crossing points to generate three-dimensional molecularly woven structures, weaving in two dimensions remains largely unexplored. We report a new strategy to access 2D woven COFs by controlling the angle of the usually linear linker, resulting in the successful synthesis of a 2D woven pattern based on chain-link fence. The synthesis was accomplished by linking aldehyde-functionalized copper(I) bisphenanthroline complexes with bent 4,4'-oxydianiline building units. This results in the formation of a crystalline solid, termed COF-523-Cu, whose structure was characterized by spectroscopic techniques and electron and X-ray diffraction techniques to reveal a molecularly woven, twofold-interpenetrated chain-link fence. The present work significantly advances the concept of molecular weaving and its practice in the design of complex chemical structures.

High-Performance NiO/TiO2/ZnO Photovoltaic UV Detector.

The ultraviolet (UV) photodetector has found many applications, ranging from optical communication to environmental monitoring. There has been much research interest in the development of metal oxide-based UV photodetectors. In this work, a nano-interlayer was introduced in a metal oxide-based heterojunction UV photodetector to enhance the rectification characteristics and therefore the device performance. The device, which consists of nickel oxide (NiO) and zinc oxide (ZnO) sandwiching an ultrathin dielectric layer of titanium dioxide (TiO2), was prepared by radio frequency magnetron sputtering (RFMS). After annealing, the NiO/TiO2/ZnO UV photodetector exhibited a rectification ratio of 104 under UV irradiation of 365 nm at zero bias. The device also demonstrated a high responsivity of 291 A/W and a detectivity of 6.9 × 1011 Jones at +2 V bias. Such a device structure provides a promising future for metal oxide-based heterojunction UV photodetectors in a wide range of applications.

Synergistic Stimulation of Metal-Organic Frameworks for Stable Super-cooled Liquid and Quenched Glass.

Metal-organic framework (MOF) glasses are a fascinating new class of materials, yet their prosperity has been impeded by the scarcity of known examples and limited vitrification methods. In the work described in this report, we applied synergistic stimuli of vapor hydration and thermal dehydration to introduce structural disorders in interpenetrated dia-net MOF, which facilitate the formation of stable super-cooled liquid and quenched glass. The material after stimulus has a glass transition temperature (Tg) of 560 K, far below the decomposition temperature of 695 K. When heated, the perturbed MOF enters a super-cooled liquid phase that is stable for a long period of time (>104 s), across a broad temperature range (26 K), and has a large fragility index of 83. Quenching the super-cooled liquid gives rise to porous MOF glass with maintained framework connectivity, confirmed by EXAFS and PDF analysis. This method provides a fundamentally new route to obtain glassy materials from MOFs that cannot be melted without causing decomposition.

Large-area SnTe nanofilm: preparation and its broadband photodetector with ultra-low dark current.

Photodetectors are receiving increasing attention because of their widely important applications. Therefore, developing broadband high-performance photodetectors using new materials that can function at room temperature has become increasingly important. As a functional material, tin telluride (SnTe), has been widely studied as a thermoelectric material. Furthermore, because of its narrow bandgap, it can be used as a novel infrared photodetector material. In this study, a large-area SnTe nanofilm with controllable thickness was deposited onto a quartz substrate using magnetron sputtering and was used to fabricate a photodetector. The device exhibited a photoelectric response over a broad spectral range of 400-1050 nm. In the near-infrared band of 940 nm, the detectivity (D*) and responsivity (R) of the photodetector were 3.46×1011 cmHz1/2w-1 and 1.71 A/W, respectively, at an optical power density of 0.2 mWcm-2. As the thickness of the SnTe nanofilm increased, a transition from semiconducting to metallic properties was experimentally observed for the first time. The large-area (2.5cm × 2.5cm) high-performance nanofilms show important potential for application in infrared focal plane array (FPA) detectors.

Transparent dual-band ultraviolet photodetector based on graphene/p-GaN/AlGaN heterojunction.

Versatile applications have driven a desire for dual-band detection that enables seeing objects in multiple wavebands through a single photodetector. In this paper, a concept of using graphene/p-GaN Schottky heterojunction on top of a regular AlGaN-based p-i-n mesa photodiode is reported for achieving solar-/visible-blind dual-band (275 nm and 365 nm) ultraviolet photodetector with high performance. The highly transparent graphene in the front side and the polished sapphire substrate at the back side allows both top illumination and back illumination for the dual band detection. A system limit dark current of 1×10-9 A/cm2 at a negative bias voltage up to -10 V has been achieved, while the maximum detectivity obtained from the detection wavebands of interests at 275 nm and 365 nm are ∼ 9.0 ×1012 cm·Hz1/2/W at -7.5 V and ∼8.0 × 1011 cm·Hz1/2/W at +10 V, respectively. Interestingly, this new type of photodetector is dual-functional, capable of working as either photodiode or photoconductor, when switched by simply adjusting the regimes of bias voltage applied on the devices. By selecting proper bias, the device operation mode would switch between a high-speed photodiode and a high-gain photoconductor. The device exhibits a minimum rise time of ∼210 µs when working as a photodiode and a maximum responsivity of 300 A/W at 6 µW/cm2 when working as a photoconductor. This dual band and multi-functional design would greatly extend the utility of detectors based on nitrides.

An Exceptional Thermally Induced Four-State Nonlinear Optical Switch Arising from Stepwise Molecular Dynamic Changes in a New Hybrid Salt.

Switching materials in channels of nonlinear optics (NLOs) are of particular interest in NLO material science. Numerous crystalline NLO switches based on structural phase transition have emerged, but most of them reveal a single-step switch between two different second-harmonic-generation (SHG) states, and only very rare cases involve three or more SHG states. Herein, we report a new organic-inorganic hybrid salt, (Me3 NNH2 )2 [CdI4 ], which is an unprecedented case of a reversible three-step NLO switch between SHG-silent, -medium, -low, and -high states, with high contrasts of 25.5/4.3/9.2 in a temperature range of 213-303 K. By using the combined techniques of variable-temperature X-ray single-crystal structural analyses, dielectric constants, solid-state 13 C nuclear magnetic resonance spectroscopy, and Hirshfeld surface analyses, we disclose that this four-state switchable SHG behavior is highly associated with the stepwise-changed molecular dynamics of the polar organic cations. This finding demonstrates well the complexity of molecular dynamics in simple hybrid salts and their potential in designing new advanced multistep switching materials.

Zeolite NPO-Type Azolate Frameworks.

Three-membered rings (3-rings) are an important structural motif in zeolite chemistry, but their formation remains serendipitous in reticular chemistry when designing zeolitic imidazolate frameworks (ZIFs). Herein, we report a design principle for constructing four new ZIFs, termed ZIF-1001 to -1004, from tetrahedral ZnII centers (T), benzotriazolate (bTZ), and different functionalized benzimidazolates (RbIM) that adopt a new zeolite NPO-type topology built from 3-rings. Two factors were critical for this discovery: i) incorporating the bTZ linker within the structures formed 3-rings due to a ∠(T-bTZ-T) angle of 120-130° reminiscent of the ∠(Ge-O-Ge) angle (130°) observed in germanate zeolite-type structures having 3-rings; and ii) RbIM guided the coordination chemistry of bTZ to bind preferentially in an imidazolate-type mode. This series' ability to selectively capture CO2 from high-humidity flue gas and trap ethane from tail gas during shale gas extraction was demonstrated.

Fine-Tuning the Micro-Environment to Optimize the Catalytic Activity of Enzymes Immobilized in Multivariate Metal-Organic Frameworks.

The artificial engineering of an enzyme's structural conformation to enhance its activity is highly desired and challenging. Anisotropic reticular chemistry, best illustrated in the case of multivariate metal-organic frameworks (MTV-MOFs), provides a platform to modify a MOF's pore and inner-surface with functionality variations on frameworks to optimize the interior environment and to enhance the specifically targeted property. In this study, we altered the functionality and ratio of linkers in zeolitic imidazolate frameworks (ZIFs), a subclass of MOFs, with the MTV approach to demonstrate a strategy that allows us to optimize the activity of the encapsulated enzyme by continuously tuning the framework-enzyme interaction through the hydrophilicity change in the pores' microenvironment. To systematically study this interaction, we developed the component-adjustment-ternary plot (CAT) method to approach the optimal activity of the encapsulated enzyme BCL and revealed a nonlinear correlation, first incremental and then decremental, between the BCL activity and the hydrophilic linker' ratios in MTV-ZIF-8. These findings indicated there is a spatial arrangement of functional groups along the three-dimensional space across the ZIF-8 crystal with a unique sequence that could change the enzyme structure between closed-lid and open-lid conformations. These conformation changes were confirmed by FTIR spectra and fluorescence studies. The optimized BCL@ZIF-8 is not only thermally and chemically more stable than free BCL in solution, but also doubles the catalytic reactivity in the kinetic resolution reaction with 99% ee of the products.

New Reticular Chemistry of the Rod Secondary Building Unit: Synthesis, Structure, and Natural Gas Storage of a Series of Three-Way Rod Amide-Functionalized Metal-Organic Frameworks.

Reticular chemistry and methane storage materials have been predominately focused on finite metal-cluster-based metal-organic frameworks (MOFs). In contrast, MOFs constructed from infinite rod secondary building units (SBUs), i.e., rod MOFs, are less developed, and the existing ones are typically built from simple one-way helical, zigzag, or (mixed)polyhedron SBUs. Herein, inspired by a recent unveiled structure of Zn6(H2O)3(BTP)4 and by means of an amide-functionalized preliminary single tricarboxylate, a subsequent mixed tricarboxylate, and dicarboxylate linkers, an intricate three-way rod MOF and the next three isoreticular three-way rod MOFs have been successfully realized, namely, 3W-ROD-1 and 3W-ROD-2-X (X = -OH, -F, and -CH3), respectively. The structural analyses disclosed that the four compounds were constructed from unprecedented three-way invariant nonintersecting trigonal rod-packing SBUs cross-linked via the noncovalent-interaction-driven self-assembly of pseudo hexacarboxylates with the original tricarboxylate or different functional ditopic linkers, resulting in cage-like pore geometries accessible via ultramicroporous apertures concomitant with the complex topology transitivity, namely, 18 42 and 18 44. Sorption studies show that the apparent surface areas of these materials are among the most highly porous materials for rod MOFs. Due to the presence of favorable pocket sites created by X, ketone, and proximal amide groups as revealed by Monte Carlo molecular dynamics (MCMD) computational calculations, the MOFs exhibit impressive methane storage working capacities, outperforming the well-known rod Ni-MOF-74 and representing the highest values among rigid rod MOFs.

A Three-Dimensional sp2 Carbon-Conjugated Covalent Organic Framework.

A first example of an sp2 carbon-conjugated three-dimensional (3D) covalent organic framework (COF) (BUCT-COF-4) is synthesized via the Knoevenagel condensation of the saddle-shaped aldehyde-substituted cyclooctatetrathiophene and 1,4-phenylenediacetonitrile. Ascribed to the extended π-conjugation and long-range ordered structures, BUCT-COF-4 displays high Hall electron mobility of 1.97 cm2 V-1 s-1 at room temperature. After it is doped with iodine, the material not only exhibits an enhanced electron mobility up to 2.62 cm2 V-1 s-1 in ambient air but also presents an unexpected metal-free ferromagnetic phase transition arising from the formation of aligned spins unidirectional across the whole sp2 carbon-conjugated 3D framework. This is the first report of a ferromagnetic phenomenon in 3D COF materials, which would broaden promising applications and open a new frontier in COF materials.

Physicochemical Understanding of the Impact of Pore Environment and Species of Adsorbates on Adsorption Behaviour.

For a better design of adsorbents, it is important to know the intermolecular interaction among adsorbates and host material, leading to improved guest selectivity and uptake capacity. In this study, we demonstrate the influence of the interaction among adsorbates and substrate, controlled by the pore environment and species of adsorbates, on the adsorption behaviour. We report the unique CO2 adsorption behaviour of MOF-205 due to distinct pore geometry. The precise analysis through gas-adsorption crystallography with molecular simulation shows that capillary condensation of CO2 in MOF-205 occurs preferentially in the large dodecahedral pore rather than the small tetrahedral pore, because the interaction of CO2 with MOF-205 framework is weaker than that among CO2 molecules, while Ar and N2 are sequentially filled into two different pores of MOF-205 according to their size. Comparison of the materials with different pore environments reveals that the relative strength of the adsorbate-adsorbate and adsorbate-substrate interaction gives rise to different shapes of isotherms.

Docking of CuI and AgI in Metal-Organic Frameworks for Adsorption and Separation of Xenon.

We present a metal docking strategy utilizing the precise spatial arrangement of organic struts as metal chelating sites in a MOF. Pairs of uncoordinated N atoms on adjacent pyrazole dicarboxylate linkers distributed along the rod-shaped Al-O secondary building units in MOF-303 [Al(OH)(C5 H2 O4 N2 )] were used to chelate CuI and AgI with atomic precision and yield the metalated Cu- and Ag-MOF-303 compounds [(CuCl)0.50 Al(OH)(C5 H2 O4 N2 ) and (AgNO3 )0.49 Al(OH)(C5 H2 O4 N2 )]. The coordination geometries of CuI and AgI were examined using 3D electron diffraction and extended X-ray absorption fine structure spectroscopy techniques. The resulting metalated MOFs showed pore sizes matching the size of Xe, thus allowing for binding of Xe from Xe/Kr mixtures with high capacity and selectivity. In particular, Ag-MOF-303 exhibited Xe uptake of 59 cm3 cm-3 at 298 K and 0.2 bar with a selectivity of 10.4, placing it among the highest performing MOFs.

Thiazolo[5,4-d]thiazole-Based Donor-Acceptor Covalent Organic Framework for Sunlight-Driven Hydrogen Evolution.

2D covalent organic frameworks (COFs) could have well-defined arrangements of photo- and electro-active units that serve as electron or hole transport channels for solar energy harvesting and conversion, but their insufficient charge transfer and rapid charge recombination impede the sunlight-driven photocatalytic performance. We report a new donor-acceptor (D-A) system, PyTz-COF that was constructed from the electron-rich pyrene (Py) and electron-deficient thiazolo[5,4-d]thiazole (Tz). With its bicontinuous heterojunction, PyTz-COF demonstrated exceptional optoelectronic properties, photocatalytic ability in superoxide anion radical-mediated coupling of (arylmethyl)amines and photoelectrochemical activity in sunlight-driven hydrogen evolution. Remarkably, PyTz-COF exhibited a photocurrent up to 100 µA cm-2 at 0.2 V vs. RHE and could reach a hydrogen evolution rate of 2072.4 µmol g-1 h-1 . This work is paving the way for reticular design of highly efficient and highly active D-A systems for solar energy harvesting and conversion.

Robust Metal-Triazolate Frameworks for CO2 Capture from Flue Gas.

Construction of thermally and chemically robust metal-organic frameworks (MOFs) is highly desirable for postcombustion CO2 capture from flue gas containing water vapor and other acidic gases. Here we report a strategy based on appending amino groups to the triazolate linkers of MOFs to achieve exceptional chemical stability against aqueous, acidic, and basic conditions. These MOFs exhibit not only CO2/N2 thermodynamic adsorption selectivity as high as 120 but also CO2/H2O kinetic adsorption selectivity up to 70, featuring distinct adsorptive sites at the channel center for CO2 and at the corner for H2O, respectively. The best performing MOF in this series features low regeneration energy, high CO2 capture utility under humid conditions, and decent cycling performance for mimic flue gas.