Antimonide-based membranes synthesis integration and strain engineering.

Antimonide compounds are fabricated in membrane form to enable materials combinations that cannot be obtained by direct growth and to support strain fields that are not possible in the bulk. InAs/(InAs,Ga)Sb type II superlattices (T2SLs) with different in-plane geometries are transferred from a GaSb substrate to a variety of hosts, including Si, polydimethylsiloxane, and metal-coated substrates. Electron microscopy shows structural integrity of transferred membranes with thickness of 100 nm to 2.5 [Formula: see text]m and lateral sizes from [Formula: see text]m2 to [Formula: see text] cm2 Electron microscopy reveals the excellent quality of the membrane interface with the new host. The crystalline structure of the T2SL is not altered by the fabrication process, and a minimal elastic relaxation occurs during the release step, as demonstrated by X-ray diffraction and mechanical modeling. A method to locally strain-engineer antimonide-based membranes is theoretically illustrated. Continuum elasticity theory shows that up to [Formula: see text]3.5% compressive strain can be induced in an InSb quantum well through external bending. Photoluminescence spectroscopy and characterization of an IR photodetector based on InAs/GaSb bonded to Si demonstrate the functionality of transferred membranes in the IR range.

Measurement of carrier lifetime in micron-scaled materials using resonant microwave circuits.

The measurement of minority carrier lifetimes is vital to determining the material quality and operational bandwidth of a broad range of optoelectronic devices. Typically, these measurements are made by recording the temporal decay of a carrier-concentration-dependent material property following pulsed optical excitation. Such approaches require some combination of efficient emission from the material under test, specialized collection optics, large sample areas, spatially uniform excitation, and/or the fabrication of ohmic contacts, depending on the technique used. In contrast, here we introduce a technique that provides electrical readout of minority carrier lifetimes using a passive microwave resonator circuit. We demonstrate >105 improvement in sensitivity, compared with traditional photoemission decay experiments and the ability to measure carrier dynamics in micron-scale volumes, much smaller than is possible with other techniques. The approach presented is applicable to a wide range of 2D, micro-, or nano-scaled materials, as well as weak emitters or non-radiative materials.

Strain engineering, efficient excitonic photoluminescence, and exciton funnelling in unmodified MoS2 nanosheets.

We established locally varying strain fields in unmodified MoS2 nanosheets. The approach relies on dry release in place of multilayer MoS2 on textured Si substrates. By this process we demonstrated intense photoluminescence, a ∼70 meV decrease of the transition energy, and exciton funneling in ∼4 nm-thick MoS2 films.

Vertical Charge Transfer and Lateral Transport in Graphene/Germanium Heterostructures.

Heterostructures consisting of two-dimensional (2D) materials and conventional semiconductors have attracted a lot of attention due to their application in novel device concepts. In this work, we investigated the lateral transport characteristics of graphene/germanium heterostructures and compared them with the transport properties of graphene on SiO2. The heterostructures were fabricated by transferring a single layer of graphene (Gr) onto a lightly doped germanium (Ge) (100) substrate. The field-effect measurements revealed a shift in the Dirac voltage of Gr on the Ge substrates compared to that of the Gr on SiO2. Transfer length model measurements show a significant difference in the sheet resistance of Gr on Ge compared to that of the Gr on SiO2. The results from the electrical and structural characterization suggest that a charge transfer in the order of 1012 cm-2 occurs between Gr and Ge resulting in a doping effect in the graphene sheet. A compact electrostatic model extracted the key electronic properties of the Gr/Ge interface. This study provides valuable insights into the electronic properties of Gr on Ge, which are vital to the development of novel devices based on mixed 2D and 3D structures.